Customs by William Kirk
Jedha City Combat - scratch-built diorama (Star Wars)
by William Kirk
This scratch-built diorama fits - is in scale with the Micro Machines Series 6 minimodel of the Imperial Combat Assault Tank from the movie Rogue One. It shows the transport of Kyber crystals in the...[See More]
2 Comments
Director Orson Krennic (Star Wars)
by William Kirk
The base figure for the Director Krennic Keychain is the Euro 2016 mascot keychain. After seeing the caped man, it was obvious for me: he would be a great director Krennic from Rogue One. Almost...[See More]
1 Comments
Tie Advanced X-1 - scratch-built (Star Wars)
by William Kirk
This scratch-built Tie Advanced X-1 Fighter dimensions are 23 x 33 x 35 cm (cca 9´x 13,2´x 14´). It is in scale with my previous Tie Fighter. It took me more than four months to finish this...[See More]
4 Comments
Tie Fighter - scratch-built (Star Wars)
by William Kirk
The scratch-built Tie Fighter dimensions are 42 x 33 x 35 cm (cca 16,8´x 13,2´x 14´). It took me almost half a year to finish this model, but I didn´t have time to work on it every day. As always I...[See More]
3 Comments
Director Orson Krennic (Star Wars)
by William Kirk
Director Krennic was great villain in Rogue One: Star Wars Story, wonderfully played by Ben Mendelsohn. The Pixel Director is completely made of EVA-foam. Two A4 sheets (each 2 mm thick) are glued...[See More]
8 Comments
WALL-E scratch-built (WALL-E)
by William Kirk
Wall-E is completely scratch-built and cca 3" long / high (7,5 cm). The base is polystyrene cube 3x3 cm, covered with thin cardboard paper. Cardboard paper is also used for the eyes and hands....[See More]
23 Comments
The Technodrome - scratch-built (Teenage Mutant Ninja Turtles)
by William Kirk
This is my third Technodrome. This one is half the size of the last one, so it´s 4,5" x 5" (10x11 cm). In the future I plan to make a diorama for this smaller Technodrome - the earth core, where the...[See More]
7 Comments
Scratch-built Krennic´s Imperial Shuttle from Rogue One (Star Wars)
by William Kirk
Director Krennic´s shuttle is made - like my other customs - of plastic and cardboard. I also used the modelling clay Krea - a putty-like material. All pieces are scratch-built. The shuttle is based...[See More]
5 Comments
The Shredder (Teenage Mutant Ninja Turtles)
by William Kirk
This mini figure has the look of the classic Shredder from the 1987 cartoon show. I used the putty for the helmet and sturdy paper for the leg, arm and wrist armour, including the tiny spines (4 four...[See More]
5 Comments
Event Horizon scratch-built starship (Event Horizon)
by William Kirk
The Event Horizon is one of my favourite movies. I always wanted to have a model of this awesome ship, but there was no kit released. So after some experience of customizing for a few years I...[See More]
6 Comments
Imperial Star Destroyer (Star Wars)
by William Kirk
This is a scratch-built Imperial Star Destroyer. It is made of plastic, cardboard and things you can easily find at home - see the last picture. The neck and bridge are based on the paper model. The...[See More]
5 Comments
The Technodrome (Teenage Mutant Ninja Turtles)
by William Kirk
The Technodrome (88´TMNT) Scratch-built Technodrome from the original 80´ TMTN TV show. I always wanted a screen-accurate Technodrome, but during the show, different pictures were painted, sometimes...[See More]
11 Comments
Excelsior - Class Starship from Star Trek (Star Trek)
by William Kirk
Scratch-built Excelsior - Class starship from Star Trek. Excelsior was always my favorite starship from the series and I always wanted to try to built one by myself. The ship is made of plastic and...[See More]
8 Comments
Mirage - Style Shredder (Teenage Mutant Ninja Turtles)
by William Kirk
Mirage - Style Shredder made from the "Slice´n Dice Shredder" Playmates Action Figure. I had to cover the holes (originally for the moving blades of this figure) with putty. After that I repainted...[See More]
3 Comments
USS Akira NCC - 62497 (Star Trek)
by William Kirk
This 1:1000 Akira - Class starship is a scratch-built based on a Akira paper model. It´s made of plastic, cardboard and putty to fill the gaps. I also used plastic bottle screw cap for the Bussard...[See More]
8 Comments
Mini - Technodrome (Teenage Mutant Ninja Turtles)
by William Kirk
Mini – Technodrome Dimensions: cca 2,5´ x 2,5´ x 1,5´ in inches (cca 6cm x 6cm x 4 cm) The Mini – Technodrome is made from box of matches, cardboard, wooden stick, roll (ball) from the roll-on...[See More]
6 Comments
Technorover (Teenage Mutant Ninja Turtles)
by William Kirk
Technorover is one of the original 88´ TMNT toys I always wanted but it was never produced. The Technorover fits with the 5,5” Playmates action-figures. It is made from plastic and cardboard....[See More]
5 Comments
Krang with Bubble Walker (Teenage Mutant Ninja Turtles)
by William Kirk
This is the customized Bubble Walker with a customized Krang figure inside. For the Bubble Walker, it was necessary to rebuilt the rear part of the walker, both sides of the view-glass, the front...[See More]
4 Comments
Rita Repulsa (Power Rangers)
by William Kirk
When Bandai decided to make a Rita figure, they produced her in the 4“ series. I have the 6" Lord Zedd figure so I decided to make my own Rita. This figure fits with the 6“ Lord Zedd. My favourite...[See More]
3 Comments
MMPR Movie Lord Zedd (Power Rangers)
by William Kirk
MMPR Movie Lord Zedd made of Bandai Power Rangers Superlegends Lord Zedd. Lord Zedd was always my favourite MMPR character, but until 2008, there was no good figure. After they released the TV-Show...[See More]
1 Comments
Rocksteady (Teenage Mutant Ninja Turtles)
by William Kirk
The Rocksteady action figure definitely needed an upgrade. Some re-sculpting was necessary here: the shoes (his trouser-legs were too long), his t-shirt (the original one was too long, so his belly...[See More]
1 Comments
Shredder´S Transport Module (Finally Complete) (Teenage Mutant Ninja Turtles)
by William Kirk
"Well, well, Turtles, it´s Shredder time now!" Finally, I finished the work on this custom. The module fits with the Playmates 5,5”action figures. I used a cylinder-shaped candy box, two 10 –DVDs...[See More]
4 Comments
Bebop (Teenage Mutant Ninja Turtles)
by William Kirk
This is the repaint of the 1991 Playmates Head Spinnin´Bebop with some additional sculpting. I added the two hand grenades, the shoulder bands that „hold“ the shells and the munition band. I cut off...[See More]
1 Comments
Foot Soldier (Teenage Mutant Ninja Turtles)
by William Kirk
This is a repaint of the 88 Playmates Foot Soldier. I find this figure as the most true one in the TMNT Playmates series. With a repaint it really looks like from the classic TMNT cartoon....[See More]
1 Comments
The Shredder (Teenage Mutant Ninja Turtles)
by William Kirk
This is the repaint and partial re-sculpt of the Playmates 1988 Shredder from the original TMNT TV show. This is my favorite Shredder of the franchise. I improved the Shredders armor: I added the...[See More]
General Traag - Resculpted (Teenage Mutant Ninja Turtles)
by William Kirk
The base figure needed repaint and re-sculpting – especially the head / face and the left foot. Almost all material needed was cut off the original figure and “replaced". I also used putty to soften...[See More]
1 Comments
Shredder (Teenage Mutant Ninja Turtles)
by William Kirk
This was my second attempt to improve the original Playmates 88 Shredder. This time I decided for the Shredder from the first TMNT movie. Now I improved his helmet and armor. For the helmet armor, I...[See More]
Secret of the Ooze Shredder (Teenage Mutant Ninja Turtles)
by William Kirk
This is a repaint of the 1988 Playmates Shredder figure with some re-sculpt of the face, helmet and the shoulder and leg armor, so it fits to the Shredder from the second TMNT movie. I also cut off...[See More]
2 Comments
 
28 Customs Found