Diorama / Playset Customs
Indoraptor (Jurassic Park)
by mittt
I changed the way the head was facing and changed the position of the arm,I changed the way the tail was facing. but all that changing put it out of balance so I put a rock under his arm as if he was...[See More]
Bill (Kill Bill)
by Mattttt
David Carradine's first appearance in the film: the church scene! I cut the joints to place the character in a sitting position, replaced the left hand (by a T-1000 one) so that he can hold the flute...[See More]
2 Comments
Ewok Hunt (Star Wars)
by Edgy 3
For my 100th post I was inspired by Starwars battlefront's limited time Horror/survival game " Ewok Hunt ". If you didn't have the chance to play... it was awesome !!! A squad of stormtroopers...[See More]
7 Comments
Flowers Blooming in a Barrel (Original)
by SceneShapers
Sculpted the rock wall from cork and concrete. Base used a mixture of air dry clay, textured paint, reindeer moss and small leaves made from a leaf puncher. Threw in a preserved log for good measure....[See More]
3 Comments
TMNT Turtle Lair (Teenage Mutant Ninja Turtles)
by Tankster
made out of Foam board I measured out the lines and used a hot knife for the details added allot of diorama pieces I have been collecting made the couch out of foam and fabric utilized parts from...[See More]
11 Comments
Hoth / Wampa Cave Diorama - Star Wars (Star Wars)
by TGC Customs
"Easy Girl......You smell something " I always liked the micro collection playsets more than the 3 3/4" scaled. So that's where the idea for this came from. I based it on the micro Hoth Wampa Cave...[See More]
1 Comments
Brick Wall/Street (Marvel Universe)
by Exile8782
This is completely made from pink insulation foam board. Everything is hand carved with a xacto knife. The downed power pole is a wooden dowel rod (just need to find some wires for it ) then several...[See More]
4 Comments
Deadpool Weapon Rack (Marvel Legends)
by Harker
This Deadpool Weapon Rack is scratch built from craft sticks. Emblem is airbrush and then protected with dullcoat. Chickens were found on eBay, and are hilarious....[See More]
4 Comments
Jadha Patrol (Star Wars)
by FigureVault
Caulk, Hot glue, plaster, tamiya panel liner and effects, acrylic paint , modge podge, metal wire, balsa wood, styrene...[See More]
2 Comments
Black panther throne 1/12 (Marvel Legends)
by lanou's93
Custom hand made 1/12 black panther throne inspired from the comics perfect fits for your legends and figuarts. Made from 1 inch insulation foam base is 12x12 height is 14 More pics in auction ......[See More]
3 Comments
Lt Falcon In the field (G.I. Joe)
by Jason Stead
Mezco Daredevil Body and head. Added Mezco Punisher forearms and shins. Mezco Rogers boots painted in Jungle Boot Green/black. Made from Cloth felt the beret with cloth 5th SFG Beret flash added....[See More]
5 Comments
Starwars Hoth Diorama (Star Wars)
by FigureVault
plastic frame, clay, modge podge, tamiya panel liner and weather effects, tamiya plastic cement, woodland scenics rocks, spackle paste...[See More]
2 Comments
EFSF Zaku II (Gundam)
by FigureVault
Balsa wood, tamiya brick wall kit, gundam model, magic sculpt, tamiya panel liner and weather effects, acrylic paint, modge podge ect....[See More]
2 Comments
Forgotten (Gundam)
by FigureVault
Styrofoam plant material, acrylic paint, modge podge, model, tamiya weather effets, trainmodel rocks and tropical palm trees, Plaster, balsa wood, etc...[See More]
5 Comments
Sandtrooper (Star Wars)
by FigureVault
Balsa wood, modge podge, acrylic paint, matte finish, magic sculpt 1:1, plaster, tamiya weather effects...[See More]
2 Comments
"Deadlier Than The Male" (Marvel)
by Jinyei
Aloha Fellow Realmers, Today I present to you “Deadlier Than The Male” a companion piece to the “Castle Armory”. I had already assembled this feminine side of punishment for my “Armory” project but...[See More]
8 Comments
ATST Diorama (Star Wars)
by FigureVault
Balsa wood, acrylic paint, tamiya snow effects, starwars kit and table top figure, spray paint, modge podge, matte finish spray, tamiya weather effects...[See More]
2 Comments
RX-78 Vs Zaku II (Gundam)
by FigureVault
Tamiya weather sets, acrylic paint, plaster, balsa wood, styrofoam, Woodland scenics trees, matte finish, gesso, WS Dirt, WS realistic water effects, Metal wire,...[See More]
3 Comments
TG-D002 Cave Distressed Display Stand (Marvel Legends)
by Trustfulguy9100
This is my second diorama (TG-D002). Great for displaying your figures on. Perfect for the shelf or the office desk. Setup a cool scene. Listing on eBAY and am also willing to trade for this piece...[See More]
4 Comments
Bespin / Carbon Freeze Chamber Diorama (Star Wars)
by TGC Customs
When I was a kid I was into Star Wars like most guys my age, and I loved everything about the toys. So when the micro collection came along I was all in on them as well. I always liked the micro...[See More]
3 Comments
Dark Phoenix diorama (X-Men)
by ZioWolvie
This diorama is dedicated to Dark Phoenix. Entirely handmade with a base of wire, transparent adhesive tape and finally hot glue to give the effect of the movement of the fire. The lights included in...[See More]
3 Comments
Custom War Distressed Building - TG-D001 (Marvel Universe)
by Trustfulguy9100
This diorama is a hand carved/painted custom diorama play set. Made from a heavy duty foam board. Dimensions are: 11" tall, 14" wide and 11" deep. Weighs just over 1lb (one pound). Foam board...[See More]
4 Comments
Saint Seiya Sanctuary clock (Saint Seiya)
by Manny
Foam board for all flat surfaces and corrugated card board for pillars. Base color is acrylic flat White and the details were painted using brown and black acrylic paint. Clear coat was used for...[See More]
2 Comments
Tibet Ice Cave 1/6 Diorama (Tomb Raider)
by Livia
My second diorama :) I used styrofoam boards for the cave. Frozen lake is two component epoxy resin poured and coloured in several layers. Icicles are made out of hot glue :) Tibet Outfit Lara is my...[See More]
8 Comments
Vintage The Real Ghostbusters Diorama / Display (Ghostbusters)
by berts
The Classic TRG Series repainted, with a damaged Ecto-1. I made the GB Headquarters out of Foam and painted it in Cartoon style. Powered up ecto-1 with a Star Wars Falcon Gun and repainted it....[See More]
3 Comments
1/12 sewers diorama **repost (Marvel Legends)
by sasplasticarts
1/12 hand made diorama/display build from 1" insulation foam. Fully magnetized for storage. Acrylic painted. For comission : sasplasticarts@gmail For more works : @sasplasticarts...[See More]
5 Comments
1/12 Apartment Diorama (Marvel Legends)
by sasplasticarts
1/12 hand made diorama/display build from 1" insulation foam. Fully magnetized for storage. Acrylic painted. For comission : sasplasticarts@gmail For more works : @sasplasticarts...[See More]
4 Comments
Epic Knight (Wrestling)
by Deus_Drone
The Figure is from the WWE Jakks Build N Brawl Wrestling Figures. The Helmet is from a Schleich spartan And the Shield is from the boss fight studios accessories. The big leg is from a spawn figure...[See More]
Hk-47 (Star Wars)
by Deus_Drone
This is actually a repainted build a figure from the legacy collection, so this is not actually the HK-47 and was initially blue. This went through several paint jobs to get to this stage. The Gun...[See More]
Tomb Raider Lara Croft Asia Diorama (Tomb Raider)
by Livia
Diorama is made out of styro and plaster and different purpose acrylics. Was inspired by an existing place what I've visited last summer in Jaffna, Sri Lanka. Was a great fun to make it, as reminded...[See More]
13 Comments
 
Displaying customs 1 - 30