lacquers....WTF?

Need help getting your custom completed? Looking for your next idea? Do you need some new tips or suggestions to complete your project? Come chat with us!

Moderator: Regulators

lacquers....WTF?

Postby BumAssAfro » Thu Aug 14, 2014 5:56 pm

I'm not necessarily new in the customizing scene but I'm still a "youngling". It's been about a year since I got serious but there is still a lot for me to soak up with my sponge. One of those is Lacquers I usually put on a base coat of black, with testors acrylic, or any other color I need, I knew about Lacquers but never knew exactly what they are or their use. So I was wondering those exact questions. Also is there any recommended Black Lacquers. Thanks Guys....and Gals. P.S. Are Lacquers and Primers the same, if not can some let me know the difference. Sorry if I seem like a dork with my questions but hey what can I do.
BumAssAfro
Inductee Realmer
 
Posts: 12
Joined: Fri Aug 01, 2014 12:24 am

Re: lacquers....WTF?

Postby RedRebelCustoms » Fri Aug 15, 2014 5:06 am

As a general rule lacquers, enamels & acrylics can safely cover base lacquers. Enamels & acrylics can cover enamels but not lacquers. That doesn't mean they will work well on plastic parts. Lacquers are some type of solvent based. Some plastic primers are lacquer based and seem to work ok with acrylics there are ones from the hardware stores that are 'hot' and may melt styrenes. Base coat acrylics can only be covered by more acrylics. Enamels are oil based. To clean up, you need to use enamel thinner or mineral turpentine. They take forever to dry and seem to never dry on plastic. That's about my experience with enamels. Acrylics are water/alcohol based and can be cleaned with water or windex. They are usually thinned to a milky consistency and applied in thin layers. Some acrylics are lacquer based. I have never used those.
Primers tend to be a debate as to which one to use. Make sure they say for plastic. Some primers that have a lacquer base are made for use on plastics( read the can). I prefer Tamiya spray primers. Some are made for ABS and Styrene and can be used on metal. They seem to be great on sculpted parts as well. Hope that helps.
REDREBELCUSTOMS
User avatar
RedRebelCustoms
Elite Realmer
 
Posts: 1331
Joined: Mon Jan 31, 2011 12:45 pm
Location: Phoenix, AZ

Re: lacquers....WTF?

Postby BumAssAfro » Tue Aug 26, 2014 1:26 pm

Thank. You. So Much
BumAssAfro
Inductee Realmer
 
Posts: 12
Joined: Fri Aug 01, 2014 12:24 am


Return to Custom Help / Questions / Info

Who is online

Users browsing this forum: No registered users and 1 guest


cron