Need help.

Post your wishlist! What do you have for trade? Please no Retailer or auction links.

Moderator: Regulators

Need help.

Postby John11756 » Tue Nov 27, 2012 9:32 pm

so i am working on a deadpool custom and I accidently tore more than the peg off one of the ball shoulder jointes on the ML Bullseye body, would anyone happen to have one i could buy or something? i dont have much for trade but ill try to post what i have. i also need the Katannas from the hand ninja or the ronin set, they also came with the two pack Deadpool.
John11756
Regular Realmer
 
Posts: 192
Joined: Mon Jun 11, 2012 4:43 pm

Re: Need help.

Postby Green Skin » Tue Nov 27, 2012 11:22 pm

Post a picture of it if you can. I might have the part you need, but I'm not sure.
User avatar
Green Skin
Regulator
 
Posts: 1028
Joined: Sun Aug 02, 2009 3:00 am
Location: Minneapolis

Re: Need help.

Postby John11756 » Tue Dec 04, 2012 9:53 pm

Here is the part.
Image
John11756
Regular Realmer
 
Posts: 192
Joined: Mon Jun 11, 2012 4:43 pm

Re: Need help.

Postby John11756 » Tue Dec 04, 2012 10:09 pm

Image
Last edited by John11756 on Wed Dec 05, 2012 7:15 am, edited 1 time in total.
John11756
Regular Realmer
 
Posts: 192
Joined: Mon Jun 11, 2012 4:43 pm

Re: Need help.

Postby Darththomas » Wed Dec 05, 2012 5:29 am

Can't really see anything wrong with that but just in case here's a couple of links to some paint rub tutorials I did, you might find something useful in there

http://www.figurerealm.com/viewcustomtutorial.php?id=69

http://www.figurerealm.com/viewcustomtutorial.php?id=70

If you've stretched the peg that fits into the arm then you're gonna have to switch the whole peg out with a screw, just find one the right size, cut off the stretched peg, leaving enough to insert the screw and drill a small hole in the remaining part of the peg, small dab of superglue on the end of the screw and screw it into the hole on the piece of peg. It's quite a tricky method to learn but once you've learnt it it's easy as pie so i'd suggest practising first and do a lot of test fitting without the glue.
Image
FaceBook Emlyn Darthomas Thomas
WIP viewtopic.php?f=25&t=25093
User avatar
Darththomas
Regulator
 
Posts: 3175
Joined: Fri Apr 24, 2009 7:16 pm
Location: Manchester, England

Re: Need help.

Postby John11756 » Wed Dec 05, 2012 7:05 am

i tore past the peg that was the part i need not the part i damaged. basically the peg came off with part of the ball joint.
John11756
Regular Realmer
 
Posts: 192
Joined: Mon Jun 11, 2012 4:43 pm

Re: Need help.

Postby John11756 » Wed Dec 05, 2012 7:26 am

Image
John11756
Regular Realmer
 
Posts: 192
Joined: Mon Jun 11, 2012 4:43 pm

Re: Need help.

Postby Darththomas » Wed Dec 05, 2012 12:15 pm

Aaahh, now I see, yeah, sorry to say but that looks pretty much done for to me. Maybe someone else has a method of fixing it but I'm out of ideas. So I'll leave you with this bullseye is done on the same body as a fair few other legends so the same joint off any of these would work easily as a replacement. Moonknight, quicksilver, captain marvel and tarantula to name a few so of you're looking for a replacement don't just limit it to bullseye.
Image
FaceBook Emlyn Darthomas Thomas
WIP viewtopic.php?f=25&t=25093
User avatar
Darththomas
Regulator
 
Posts: 3175
Joined: Fri Apr 24, 2009 7:16 pm
Location: Manchester, England

Re: Need help.

Postby John11756 » Wed Dec 05, 2012 4:10 pm

thank you.
John11756
Regular Realmer
 
Posts: 192
Joined: Mon Jun 11, 2012 4:43 pm


Return to Trading Post

Who is online

Users browsing this forum: No registered users and 1 guest