galactron22

Member since April 6, 2015
Last active on Saturday, July 14, 2018
Displaying the latest comments posted by galactron22.
See also: Comments for galactron22

Sunday, November 5, 2017
Customs: Claire redfield by christinacxxx -
Sunday, November 5, 2017
NOICEEE!!!!!! if you would ever sell her, I'd buy.
Saturday, June 17, 2017
Customs: Johnny Bravo (Marvel Bravo Style) by VicVeinz -
Saturday, June 17, 2017
Gotta Love Johnny Bravo, you nailed him.
Sunday, April 23, 2017
Topics: Stuck shoulder joint by RedRobinCustoms -
Sunday, April 23, 2017
you could use a hair dryer to heat up the joint and work it loose gently, another solution is to boil some water abd dip it for 10 seconds, but be careful no to get burned with either solution.
Monday, April 17, 2017
Good luck finding that Cyclops, I've been looking for a while now, it's the only figure I'm missing and I refuse to be scalped on Ebay, I got that arm x2 if you want it, I'll just send it to you for free, send me your adress.
Monday, April 10, 2017
Topics: Should I use bootlegs? by johnnynitro1 -
Monday, April 10, 2017
The S6 Deadpools I've picked up are practically identical to the originals, they bring the Alt head and taco and are only missing that crappy rifle and the missile laucher he brings.
Topics: Wolverine casts by Foxdie -
Monday, April 10, 2017
I think ClayorNot had it but hes' updating his store at the moment:
http://www.clayorrnotcustoms.com/

Found the head on Ebay of all places:
http://www.ebay.com/itm/MARVEL-LEGENDS- ... 2494142652 ...
Saturday, April 8, 2017
Customs: Mysterio by TXT -
Saturday, April 8, 2017
Awesome!!!! we so need a new Mysterio
Tuesday, April 4, 2017
Topics: Trade or sale by RedRobinCustoms -
Tuesday, April 4, 2017
Personally I don't have a spare one but I found a really cheap one for you on Ebay:

http://www.ebay.com/itm/142328360840?ul_noapp=true
Thursday, March 30, 2017
Topics: Suggest paints Tamiya clear, won''t disolve? by Spartan-023 -
Thursday, March 30, 2017
What brwnd was the silver paint you were using? sometimes mixing paint brands can cause some issues.
Wednesday, March 1, 2017
Topics: Wolverine by RedRobinCustoms -
Wednesday, March 1, 2017
Hmmm...I'll have to check if I have an extra, but I think I can help, just tell me what you got to trade for it.
Topics: Need help using a dremel! by johnnynitro1 -
Wednesday, March 1, 2017
I'd suggest you use a pin vise, it's like a small manual drill, you can probably pick one up at any hobby shop or even amazon, and since it's hand powered you don't have to worry about control.

https://www.amazon.com/Smart-Fun-Precis ... hand+drill
Wednesday, February 22, 2017
Topics: Trade Feedback by Kyle Robinson -
Wednesday, February 22, 2017
+1 ENulmerfigs
Topics: What resin do you use for casting? by CustomKAT -
Wednesday, February 22, 2017
I've been playing with this myself, I also use the OOMoo-30, but I've found that Alumillite FLex 60 works pretty well it has a potlife of 5-7 mins and you can dye it, I'm still learning how to use it but in my tests it's worked pretty well.

http://www.alumilite.com/store/p/946-Flex-60.aspx
 I have that same issue, it's like as soon as you break the seal it begins to dry up, I had to throw away an entire bottle of it, I just try to seal it up as best as piossible and put it in a ziplock bag, that helps a bit. DrNightmare, it does...it cures to a hardish rubber in 48 hrs and it has some give afterwards but nott too much that the head will fall off.
Tuesday, February 21, 2017
Topics: What resin do you use for casting? by CustomKAT -
Tuesday, February 21, 2017
I've been playing with this myself, I also use the OOMoo-30, but I've found that Alumillite FLex 60 works pretty well it has a potlife of 5-7 mins and you can dye it, I'm still learning how to use it but in my tests it's worked pretty well.

http://www.alumilite.com/store/p/946-Flex-60.aspx
Monday, February 13, 2017
you think the Zombies would become douchebags if they ate him? Great Job man A++++++++++++++++++++++++++++++++
Monday, February 6, 2017
Topics: Adhesives Help by Illegal_exe -
Monday, February 6, 2017
what brand of glue is this?
Tuesday, January 17, 2017
Topics: Putting Together a Magik Figure by galactron22 -
Tuesday, January 17, 2017
Thanks, this is going to be a bit of a challenge, but I think I can do the sculpt, I can even get away with using the alt lower left arm of a Nico Figure. that would cut down on some sculpting.
Friday, January 13, 2017
Topics: Willing to trade by galactron22 -
Friday, January 13, 2017
bump
Topics: Willing to trade by galactron22 -
Friday, January 13, 2017
Bump
Friday, December 23, 2016
Customs: Dzulum Bioroid Enforcer by Dr.Mind -
Friday, December 23, 2016
Gotta say I love it, you did a great job with what you had.
Thursday, December 22, 2016
Customs: Zorn by LuvNidleness -
Thursday, December 22, 2016
I've seen the show and I don't find it funny...but I do like Zorn
Customs: Hover Tank Commander - Rogue One by Hemble -
Thursday, December 22, 2016
I gotta do this to one of mine
Wednesday, December 21, 2016
Topics: Willing to trade by galactron22 -
Wednesday, December 21, 2016
bump
Saturday, December 17, 2016
Topics: Re-packers...DAMN THEM!!!!! by galactron22 -
Saturday, December 17, 2016
Went to my Local TRU last night and spotted a Sandman BAF Black Symbiote Spider man, wheni grabbed the package some one had replaced it with a old HALO fig, so I grabbed the closes associate that I found and I explained to him what was going on with this figure...dud looked at me all clueless and said "wait that's not Spiderman?" so I asked for his supervisor he came and I explained to him what was going on he said he would tale care of it, five mins later I walked by the shelf again and the repacked Halo fig was back up.
Wednesday, October 26, 2016
Customs: Belit from Conan the the Barbarian by Bartman3 -
Wednesday, October 26, 2016
Great sculpt job and all...but you got to paint that head, it draws away from your great sculpt on the outfit.
Wednesday, October 19, 2016
Customs: Pirate-pool by PackRatStudios -
Wednesday, October 19, 2016
AWESOME!!!!!!!! love that chain fed cannon that is SOOOOO something he would come up with I give this one an A++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
amazing job with the parts, and I love me some Parrot pool.
Tuesday, October 18, 2016
Topics: Willing to trade by galactron22 -
Tuesday, October 18, 2016
bump
Friday, October 7, 2016
Topics: Willing to trade by galactron22 -
Friday, October 7, 2016
bump
Tuesday, September 27, 2016
Topics: Looking for Deadpool (in all the wrong places) by MrMonocle -
Tuesday, September 27, 2016
I know how you feel man...I spotted two complete cases of the X-men Wave sans the deadpool at my local Walmart. either someone in store knows what they are getting or scalpers have uncanny radar.
Wednesday, September 21, 2016
Topics: Willing to trade by galactron22 -
Wednesday, September 21, 2016
bump
Monday, September 19, 2016
Customs: 4" BVS Wonder Woman by RW Customs -
Monday, September 19, 2016
good job...but I would have liked to see the raw pictures to better appreciate the figure.
Thursday, September 8, 2016
Topics: Trade Feedback by Kyle Robinson -
Thursday, September 8, 2016
+1 twehner31 (multi figure trade) filled some gaps on my collection A+++
Topics: Willing to trade by galactron22 -
Thursday, September 8, 2016
bump
Saturday, September 3, 2016
Topics: Willing to trade by galactron22 -
Saturday, September 3, 2016
MIP...Mint In Package. Needing a complete one but if you got some parts willing to trade I'll welcome them.
Friday, September 2, 2016
Customs: Kitty Pryde Repaint by kojikoji -
Friday, September 2, 2016
WOW!!! very nice
Wednesday, August 31, 2016
Customs: She Hulk by masterpiece -
Wednesday, August 31, 2016
DAMN!!!!!! need to add this to my collection. A++++++++++++++++++++++
Customs: Savage Land Storm by masterpiece -
Wednesday, August 31, 2016
RAWR!!!!! Love it man...very on the nose, very sexy A++++++++++++++++++++++++++++++
Topics: Willing to trade by galactron22 -
Wednesday, August 31, 2016
I think I do
Wednesday, August 24, 2016
Topics: Willing to trade by galactron22 -
Wednesday, August 24, 2016
not a big NECA collector
Tuesday, August 23, 2016
Customs: April O''neil by Kjia -
Tuesday, August 23, 2016
Hmmmm...not sure about the Padme head, I think a 25th Ver7 Lady Jaye head would have worked better, the hairstyle and likeness is much closer to April than a Padme head with braids...just my opinion tho. Besides that the choice for the body and camera are great.
Saturday, August 20, 2016
Topics: Need suggestions for Man-Wolf head by obliterator999 -
Saturday, August 20, 2016
Judging by the hand hinges I'd say it's a 1:12 figure.
Topics: Where can I find an action figure head like this? by StarGirl -
Saturday, August 20, 2016
I think you'd be better off repainting, finding something so specific might be hard.
Wednesday, August 10, 2016
Topics: In search of.. by piiinecone -
Wednesday, August 10, 2016
Found this:

http://vortiouscustomaccessories.ecrate ... ulder-pads

never bought from this guy so I don't know how reliable he is.
Sunday, August 7, 2016
Topics: In search of.. by piiinecone -
Sunday, August 7, 2016
It's not actually a vest. the armor is actually sculpted onto the Torso. Your best bet is to buy one on ebay:
Saturday, July 30, 2016
Topics: Marvel legends needed by GAZLEO -
Saturday, July 30, 2016
Mostly into trading...if you got something you want to trade let me know.
Wednesday, July 20, 2016
Customs: Wolverine by Stronox -
Wednesday, July 20, 2016
I think this costume would work on MCU movie
Friday, July 15, 2016
Topics: Marvel legends needed by GAZLEO -
Friday, July 15, 2016
Could probably help you with the Spiderwoman
Topics: Paint types - Which are the best? by The_Storm_Monarch -
Friday, July 15, 2016
Tamiya does work pretty well also, you just got to let the pait cure for a day or two before assembly.
Topics: Marvel legends needed by GAZLEO -
Friday, July 15, 2016
a very ambitious and rare list...what do you have to offer in exchange?
Customs: Fallout 3 The Antagonizer by ENulmerfigs -
Friday, July 15, 2016
Hey Wait....wasn't the antagonizer a woman?
Displaying comments 1 - 50