LuvNidleness

Member since November 3, 2010
Last active on Sunday, December 9, 2018
Displaying the latest comments posted by LuvNidleness.
See also: Comments for LuvNidleness

Tuesday, December 4, 2018
Topics: Cape Swap and Glue by brewcrewfan77 -
Tuesday, December 4, 2018
Try using (Cyanoacrylate) Superglue and Baking Soda.
Monday, December 3, 2018
Topics: Looking for Custom Heads by Runeshaper -
Monday, December 3, 2018
Message me.
Thursday, November 1, 2018
Topics: Custom Shunsui Kyoraku figure from Bleach anime by Rooman -
Thursday, November 1, 2018
That's a cool character. I'll do it, send me a message.
Monday, October 29, 2018
Customs: Rainbow Brite by LuvNidleness -
Monday, October 29, 2018
This is awesome bro. Great job.
 Thank you.
Customs: Rainbow Brite by LuvNidleness -
Monday, October 29, 2018
Thank you all for your wonderful comments.
Tuesday, April 24, 2018
Customs: The Phantom by frozeninsane -
Tuesday, April 24, 2018
Welcome to Figurerealm. Keep up the good work.
Wednesday, April 4, 2018
Customs: Casey Jones by Donnieslaboratory -
Wednesday, April 4, 2018
Yes! Great work. I've experienced this too from another person who has a huge ego and got butt hurt. Keep working hard. Haters get forgotten!
Saturday, February 24, 2018
Topics: Spare parts for sh figuarts figure by Mushin -
Saturday, February 24, 2018
Ok. Message me.
Thursday, February 22, 2018
Topics: Spare parts for sh figuarts figure by Mushin -
Thursday, February 22, 2018
I think I may have one.
Monday, January 8, 2018
Topics: Crowbar for Super Powers Joker figure? by Mitewing -
Monday, January 8, 2018
Take a look at the crowbar that comes with the DC Classics Mutant Leader.
Saturday, January 6, 2018
Topics: Custom Enchantress by dudewheresjay -
Saturday, January 6, 2018
I'm willing to give it a go. Send me a message.
Friday, January 5, 2018
Topics: molds and castings by apocalypse4 -
Friday, January 5, 2018
From the little experimenting I did, you'll be okay with most materials you use, the problem is the bubbles that form. You'll need some kind of pressure pot or vacuum to get rid of them. You can minimize them with good mixing/pouring techniques and clever mold making, but I've never seen flawless casts doing that without the pot unless they were really simple pieces, like push molds.

You might like Flex 50 or 60 (made by Alumilite) for heads, so they can pop onto pegs like official figure heads. Flex 30 was excellent for very flexible skirt pieces, but the working time is like 5 minutes. You'll need to extend that working time with additives if you want to use a pressure pot.
 This is good advice. I tried this myself and the biggest issue that came up was painting the pieces. The Flex series is about the same price across the board for flexible Urethane, but it just was a pain to see the paint rub right off. It looks like the skirt pieces is the best bet for this stuff as long as you pigment it or color it first.
Wednesday, January 3, 2018
Topics: molds and castings by apocalypse4 -
Wednesday, January 3, 2018
I really don't have specific figures in mind but I think at this point I have a large enough library of fig parts that
I could start molding and casting them and that in the long run it would be cheaper then buying fodder or cast from someone else.
 You can never go wrong with Smooth-On products. It seems to be the trade secret that people are hiding. Bought a custom head from a decent artist on Ebay, and The quality of the part was amazing, and I was able to figure out what the artist used even though he ignored my messages asking for a bit of assistance. Wasn't too hard, just a bunch of trial and error.
Wednesday, December 27, 2017
Topics: molds and castings by apocalypse4 -
Wednesday, December 27, 2017
That's a very ambitious prospect. What figure(s) are you planning on making?
Wednesday, December 13, 2017
Customs: Blood-geon by PackRatStudios -
Wednesday, December 13, 2017
This is really cool.
Wednesday, November 15, 2017
Customs: Taarna the Last Tarakian by Wanderer-X -
Wednesday, November 15, 2017
Love it! Fantastic Job!
Monday, November 13, 2017
Topics: Looking for someone to sculpt two heads by Emil -
Monday, November 13, 2017
I'll do it. Just message me.
Saturday, November 4, 2017
Topics: Shrinking/ enlargement by david86 -
Saturday, November 4, 2017
Message me.
Thursday, November 2, 2017
Customs: Mr. Big by Perrosalamandra -
Thursday, November 2, 2017
You keep doing Art of Fighting characters! It's about time someone makes something other than Marvel, DC, Deadpool repeat. I wanna see the boss character with the crazy looking mask.
Custom Contests: Pixel Power by LuvNidleness -
Thursday, November 2, 2017
How exciting! This contest is going to be fantastic! Have at it everyone! I can't wait to see what everyone comes up with.
Wednesday, October 25, 2017
Topics: What''s a good flat white paint to us ? by Thunderstrike14 -
Wednesday, October 25, 2017
Let's give credit where credit is due. I learned how to get the paint to actually stay on the figure after Nigntmare here responded to my question about the paint he used on the custom sent through the first secret exchange event. That's when I started using the VHT and it's worked out magically for me! Thanks Nightmare. Thunderstrike, If you are looking to see it in action check out the Phantom that Nightmare posted. I still have it proudly displayed in my collection case.
Monday, October 23, 2017
Topics: How to make figures more customizer-friendly by Henchmen4Hire -
Monday, October 23, 2017
And this is the exact reason that I prefer Mattel Elites as my base and then add in Marvel legends elbow joints and lower legs. The Mattel joints are customizer friendly.
Topics: What''s a good flat white paint to us ? by Thunderstrike14 -
Monday, October 23, 2017
It depends on what you prefer. Painting white is tough and sometimes irritating, but what has worked for me is this: Base VHT vinyl dye, and then airbrushing either Citadel or Model Masters white mixed with a drop or two of blue. You'll be able to see what that looks like whenever I post the Sorceress that I've been working on.
Customs: Pennywise the Dancing Clown by LuvNidleness -
Monday, October 23, 2017
This is AWESOME!
 Thanks, I really took my time with this one. I'm glad you like it.
Customs: Pennywise the Dancing Clown by LuvNidleness -
Monday, October 23, 2017
 Thank you.
Saturday, October 21, 2017
Customs: Pennywise the Dancing Clown by LuvNidleness -
Saturday, October 21, 2017
Fantastic head-sculpt ! May I ask, which sculpy you’ve used ? Great figure/ great work ! Congrats !
 Thank you, I'm a Milliput guy.
Customs: Pennywise the Dancing Clown by LuvNidleness -
Saturday, October 21, 2017
Very good work sir!!
 Thank you. This was a lot of fun to make.
Customs: Pennywise the Dancing Clown by LuvNidleness -
Saturday, October 21, 2017
Fancy a Balloon?
 I'm not supposed to take anything from strangers.
Customs: Pennywise the Dancing Clown by LuvNidleness -
Saturday, October 21, 2017
Scary head sculpt!
 Thanks. It's all about the eyes. Once you get the eyes right, the rest is history.
Absolutely right, 5-10 dollars for figures is the answer for those folks at Cryptid Toys, or have some actual characters worthwhile to go with the blanks that we would be willing to spend on. I am curious to see what they have in store for the 6" scale after the Female bodies get unlocked... Aliens?
Friday, October 20, 2017
Customs: Pennywise the Dancing Clown by LuvNidleness -
Friday, October 20, 2017
Very impressive work!
 Whispering:you'll float too. Much appreciated.
Customs: Pennywise the Dancing Clown by LuvNidleness -
Friday, October 20, 2017
Fantastic head sculpt, well done!!
 Thank you. You'll Float Too!
Friday, September 29, 2017
Customs: B/W Master Splinter by Monsterhjerne -
Friday, September 29, 2017
This is really cool. Great learning experience. You can totally scratch build almost anything now.
Saturday, September 23, 2017
Customs: Cheetara from Thundercats by Keldor Krypton -
Saturday, September 23, 2017
I like what you did here, and I got excited to see Elvira and Beetlejuice in the background of the pics.
Tuesday, September 12, 2017
Topics: Hi! Can anyone help me with this figure? by aranelfea -
Tuesday, September 12, 2017
It's a bootleg of the Warlord Slasher from King Arthur and the Knights of Justice.
Friday, September 8, 2017
Topics: Looking for a female body by heatherly84 -
Friday, September 8, 2017
try eBay Marvel Legends Thundra
Friday, August 18, 2017
Customs: The Technodrome - scratch-built by William Kirk -
Friday, August 18, 2017
I would like to second that comment. Make a giant one!
Tuesday, August 8, 2017
Customs: Skeletor by LuvNidleness -
Tuesday, August 8, 2017
Great combo of parts. It make for a cool looking Skeletor. The head sculpt looks great.
 Thank you very much.
Customs: Skeletor by LuvNidleness -
Tuesday, August 8, 2017
Great use of parts, you've made a cool horror version of Skeletor.
 I just went through my fodder bin and grabbed a bunch of parts. That's really how this happened. It wasn't till I got the hands that I decided to make a Skeletor.
Customs: Skeletor by LuvNidleness -
Tuesday, August 8, 2017
COOL!
 Thanks.
Customs: Skeletor by LuvNidleness -
Tuesday, August 8, 2017
Perfect Job !
 Thank you. I may make another one like this. This thing looked really weird whenever I started it and I'm glad it looks the part now.
Customs: Skeletor by LuvNidleness -
Tuesday, August 8, 2017
I really like this!!
 I can see, that the flash almost changes the look of the figure. I'm still happy with how it came out too. Glad you like it.
Customs: Skeletor by LuvNidleness -
Tuesday, August 8, 2017
Very cool !!!
 Thank you.
Customs: Skeletor by LuvNidleness -
Tuesday, August 8, 2017
Love the vibrant colors.. devilishly done
 Thanks again.
Customs: Skeletor by LuvNidleness -
Tuesday, August 8, 2017
Funky cool Skeletor.
 Thanks, I had a lot of fun making this one. On to the Ram Man.
Customs: Skeletor by LuvNidleness -
Tuesday, August 8, 2017
Awesome colors and slick Skeletor on this top 3 custom
 Thank you very much.
Customs: Skeletor by LuvNidleness -
Tuesday, August 8, 2017
Awesome Skeletor ,I' m loving the hands you picked for this figure
 Thank you. I was looking to go as evil as possible. The things nightmares are made of.
Customs: He Man by LuvNidleness -
Tuesday, August 8, 2017
Awesome!!
 Thanks. This is actually the better He-Man in my opinion than the other one with the beard. I'm glad someone likes it other than me.
Customs: She-Ra by LuvNidleness -
Tuesday, August 8, 2017
That Enchantress figure works great for She-Ra. Well done!
 Thank you.
Customs: She-Ra by LuvNidleness -
Tuesday, August 8, 2017
Looking good, using Enchantress as a base actually ends up gives your She-Ra a sort of classic/retro/golden age vibe.
 Thanks. It's true, whenever I saw the Enchantress, I knew right away that was perfect for She-Ra. That's why I didn't change it too much.
Displaying comments 1 - 50