I started Roxy over one year ago. Now she is finished, and here is how I made her.
Roxy was made from Hawkgirl, I cut of the wings and dremeled the details off. Her Head was replaced with a Supergirl head. Her left arm I cut at the elbow and replaced the forearm right to her hip. Now the forearm was fited with a little piece of wire in two holes which were drilled in the forearm and upper arm. The jacket, the belt with the holster, the boot tops and the curl of her hair were made from kneadadite. For the glasses I used transparent green film which I bought at a Staples store. First I create the frame of the glasses with kneadadite right on her face. When it was dry, I clued the green film with super glue on the frame, cut the border with a knife and put a little bit of kneadadite on it to model the frame right on the film. Her face was painted before I glued the green film on the frome. The hole figure was primed and painted. So I finished the first part of Roxy.
The Rocket started with a zeppelin from the movie" The golden Compass". I dremeled of the details, cut the tail fins, and then I started to gave him the form of the rocket with aves apoxy and milliput. The fins were cut from white plastic and glued with super glue in small slots which I dremeled in the rocket. the glue was dry I refilled the slots with milliput. The handlebars, the shifter and the seat were made from kneadadite. The controls and instruments were cut from white plastic. After everything was sanded smooth, I primed it and paint it.