![[Red Hulk] Hello Realmers, today I'm bringing you a figure my girlfriend did, Red Hulk! It's a straight repaint of an 03 movie Hulk, but we found that it was a very effective base for a Rulk. She painted the whole figure black, then went back and did a coat of red over that so the dark color would show through for a good textured effect. Some of the chest/stomach muscles were lined with an ultra-fine black permanent marker to really make them pop which turned out very nice. She really enjoyed making this figure and I think it really shows. Thanks for looking, and as always, comments/suggestions are always welcome.](userimages/customs/50000/49508-1.jpg) Red Hulk Incredible Hulkby Bad_Guy_RobotHello Realmers, today I'm bringing you a figure my girlfriend did, Red Hulk! It's a straight repaint of an 03 movie Hulk, but we found that it was a v...8 comments | ![[The Incredible Hulk] For the longest time I searched for the "perfect" Hulk to go in my Marvel Universe Avengers line-up. The Hulk is by far one of my favorite characters so I own and like the MU versions of him just fine but they didn't seem quite right. MU Hulk is just a little too small...he's supposed to be the HULK and tower even over the tallest heroes! And he should be big, big enough to look like he could flatten Thanos with one punch! The old MU body is bulky enough but a bit short, the new one just seems a bit shrimpy.
So my solution was the Wave 1 Hulk from the Norton movie line of figures. I think he scales perfectly, the 3rd image included shows him on-shelf to see the scale reference. He stands about 5 inches so he's not super towering over other figures like a Legends figure would, but he's definitely bigger than anybody else. I like the fact one hand is open because he can even hold some smaller heroes like the Sentinel and Galactus Masterworks can. Basically just a repaint once I](userimages/customs/49000/48851-1.jpg) The Incredible Hulk Incredible Hulkby Zebus_0For the longest time I searched for the "perfect" Hulk to go in my Marvel Universe Avengers line-up. The Hulk is by far one of my favorite c...1 comments |
![[Redhulk Bust Bank] I used green hulk bust bank body and casted koto rulk head, modified the neck,lots of dry brushing was done on this figure comments are welcome](userimages/customs/48000/47899-1.jpg) Redhulk Bust Bank | ![[Red King of Sakaar] The Red King of the Planet Sakaar! When I decided to use the Stripe chasis for him I knew there were gonna be design liberties I would have to take. I chose some aspects to include but I like the way the body works as a giant battle suit. The head area was cut out and resculpted to fit the altered Dr. Light head and most the details that aren't original are sculpted. The sword is sheet acrylic and sculpt. This one took a while but I think it was worth it, how about you? Thanks for checkin him out and keep on blastin!
T](userimages/customs/48000/47824-1.jpg) Red King of Sakaar Incredible Hulkby ole jade jawThe Red King of the Planet Sakaar! When I decided to use the Stripe chasis for him I knew there were gonna be design liberties I would have to take. ...18 comments |
![[The Bi-Beast] Here’s an addition to the showcase of customs with so-called “Alienated Anatomy”.
The Bi-Beast was constructed by a race of ancient aliens and left on Earth. It has unique anatomical features: 2 toes on each foot, 3 fingers on each hand, and 2 heads/brains.
Recipe:
It’s a repainted Lucifer base with other alien figure parts incorporated from head to toe.
Head (top) – Despero
Toes & Hands – Validus
The last photo is of the very first Marvel Legends Hulk Vs. The Bi-Beast
Thanks to all you Figurerealmers for looking and voting, and for any comments.](userimages/customs/47500/47164-1.jpg) The Bi-Beast | ![[Hulk Mini-Bust] Well... a friend of mine gave me free samples of polymer clay so I decided to give it a try :)
Recipe:
Built from scratch
>made the armature then sculpted all over it
>the base is a circular wood I found lying around
>then sculpted the letters
>the hair and the letters by the way was sculpted with epoxy(not polymer clay)as shown in the last picture
I had to watch a lot sculpting tutorials on YT to be able to finish this one. :)
I would probably make a whole Hulk Mini-Statue someday :)
Thanks for looking!](userimages/customs/46500/46024-1.jpg) Hulk Mini-Bust Incredible Hulkby rocketracerWell... a friend of mine gave me free samples of polymer clay so I decided to give it a try :)
Recipe:
Built from scratch
>made the armature then ...5 comments |
![[Dr. Bruce Banner Steampunk] Someone request more pics of Dr. Banner from my Hulkenstein set. Dr. Banner is a Spawn Twitch figure with added articulation at the shoulders, various fodder pieces and sculpt work.
Added a backpack that acts as a capacitor to collect the lightning to be used both in his creature and in his own mechanical parts. It also opens up to reveal various gauges and dials.](userimages/customs/45000/44749-1.jpg) Dr. Bruce Banner Steampunk Incredible Hulkby Madtinker76Someone request more pics of Dr. Banner from my Hulkenstein set. Dr. Banner is a Spawn Twitch figure with added articulation at the shoulders, variou...9 comments | ![[Psyklop] Well guys this is my version of Hulk's alien Psyklop.
I hope you guys like him WB!](userimages/customs/44500/44219-1.jpg) Psyklop |
![[Psyklop] Back to the Hulk collection with this relatively simple but classic addition. The Psyklops were villains of several Marvel characters including the Hulk, mostly through the 70's and 80's. A blue Devil base with some sculpted detail and an original head sculpt. The hands came off some 4" Wildcats figure and were attached using screws as pegs. They were never really drawn with all that much detail so I kept it pretty simple to try to convey the era. What do you guys think? Thanks for checkin in and keep on blastin!!
T](userimages/customs/44000/43829-1.jpg) Psyklop Incredible Hulkby ole jade jawBack to the Hulk collection with this relatively simple but classic addition. The Psyklops were villains of several Marvel characters including the H...26 comments | ![[Hulkenstein] Tis the season to be scary. This figure(s) have been my in-between project, project. Usually do a little bit while other figures I am working are drying or curing.
Ever since I saw the Two Pack Hulk head I have been tinkering in the background in creating a Hulk-like Frankenstein. Also you may not be aware I am planning on being a Mad Scientist for Halloween and made my own set of steam-punk goggles that light up. So I figure I needed a MAD creation to go with the theme of Madness.
Obviously lots of fodder was used in both figures.
Hulkenstein has a professor hulk arm, hulk-buster Ironman hand, maestro left hand, modified head, modified feet. Sculpted armor on one and a deep sea diver boot on the other. used a MOTU Snout Spout backpack and lot of cogs and gears from Michael's. The hoses and wires come from a Star Trek Borg figure. So many of the Frankenstein pics I see are either greyish or green, so I settled on a patchwork scheme.
To finish him off I found some kick butt lighten](userimages/customs/44000/43673-1.jpg) Hulkenstein Incredible Hulkby Madtinker76Tis the season to be scary. This figure(s) have been my in-between project, project. Usually do a little bit while other figures I am working are dryi...54 comments |
![[World War Hulk] Casted a red hulk head and modified the hair to fit the helmet. I cast the king hulk head too and removed the tiara. I am using reprogel, the mold that dentists use for making false teeth. And the cast is made of plaster of paris.](userimages/customs/44000/43512-1.jpg) World War Hulk Incredible Hulkby markdamalerioCasted a red hulk head and modified the hair to fit the helmet. I cast the king hulk head too and removed the tiara. I am using reprogel, the mold tha...6 comments | ![[F.F. Hulk] Arkillo base, ultimate hulk head, smart hulk lower arms, house of m hulk upper arms and feet.](userimages/customs/43000/42929-1.jpg) F.F. Hulk |
![[Hulk Red Hulk Masive Mad Smille.] i have allredy made this one, but even a massive bad core, con be even more roge, so.. open the armas dor fit more mass and made larger feet, to hold the extra 2pounds. some detail, before it get solid, put some arteries, , paited in blond black, and red, and then just red. thanks for watching, more photos in my facebook page.](userimages/customs/41000/40812-1.jpg) Hulk Red Hulk Masive Mad Smille. Incredible Hulkby dark daggeri have allredy made this one, but even a massive bad core, con be even more roge, so.. open the armas dor fit more mass and made larger feet, to...4 comments | ![[The Incredible Hulk: Ole Jade Jaw] I put this vinyl Hulk model/statue together a few years ago(May 6, 2010) and it's went through about 3 repaints. I finally got it where I am satisfied with it. I'm not that crazy about the body style beause I like big Sal Buscema type Hulks, but there's something about this one that is more natural and human-like(more like Frankenstein in the face) that appeals to me. I think it would also work great as a first apperance Hulk in gray. I made the desert base myself out of putty, glue, sand and some pebbles, since this model didn't come with a stand. I pay homage to a big Hulk fan here, ole jade jaw, with his name in the title.
G2G4LIFE!](userimages/customs/41000/40602-1.jpg) The Incredible Hulk: Ole Jade Jaw Incredible Hulkby fastfreddieI put this vinyl Hulk model/statue together a few years ago(May 6, 2010) and it's went through about 3 repaints. I finally got it where I am satisfied...17 comments |
![[Bi-Beast] Used a rotocast movie Hulk and extended the thighs to get a little more height. Sculpted the head out of Super Sculpey and made a removeable tongue for him. The fingers and toes were from a Pitt BAF. Rubber band for the belt and sculpt for the speedos. Was going for the look of the Bi-Beast as he appeared in The Incredible Hulk #169 back in 1973. I like heavy shading and this one gave me a chance to do what I like in shading the muscles with dark outlines and bright colors with the orange and yellows. Bi-Beast is my favorite Hulk villian
G2G(Glory to God)](userimages/customs/40500/40165-1.jpg) Bi-Beast Incredible Hulkby fastfreddieUsed a rotocast movie Hulk and extended the thighs to get a little more height. Sculpted the head out of Super Sculpey and made a removeable tongue fo...37 comments | ![[HULK Dr. Robert Bruce Banner: 1000 Lbs. of Rage] As what is probably the only Pitt based Hulk I'm ever gonna make, I really wanted to go all out. The 2 weak points of the body for me were the tiny bodybuilder's waist and the fact that this guy could tie his shoes without bending over. I totally resculpted the mid-section and the waist. (after several failed attempts, mind you) The arms both got cut 1/2 inch shorter and the forearms were sculpted in. The veining was done with resin dragged along on a pin as it was congealing. Each finger and toe was cut off and sculpted individually.
The head was cast from the Art Asylum statue. It has 2 holes for different heights. A higher one for "pissed off" and a lower one for "really pissed off" I built a small scaffold to suspend the statue upsidedown while the rubber cured. The first mold included the neck and shoulders due to the shape of the original sculpt, so I had to bring it down to a managable shape. It also got a bit air bound at the hair and in the mouth](userimages/customs/40500/40161-1.jpg) HULK Dr. Robert Bruce Banner: 1000 Lbs. of Rage Incredible Hulkby ole jade jawAs what is probably the only Pitt based Hulk I'm ever gonna make, I really wanted to go all out. The 2 weak points of the body for me were the tiny b...36 comments |
![["The Incredible Hulk" Movie HULK] So, I was always a bit disappointed with the Hulk figure that Target released exclusively for the "Incredible Hulk" movie a few years back, but I did actually like the head sculpt. Now, with the release of the Avengers 7 inch Hulk figure, I figured it was the perfect match! I was also happy that I didn't have to alter the Hulk body in any way (because it's a bit of a hard to find item right now). The only extreme bit of alteration I had to do was drilling a larger hole in the bottom of the "Incredible Hulk's" head. It fit nice and snug to the Avengers Hulk body and the colors actually matched quite nicely. I will probably apply some paint apps in the future, but for now I think it makes for a cool lookin' fig.](userimages/customs/40000/39564-1.jpg) "The Incredible Hulk" Movie HULK Incredible Hulkby ruredi2rocSo, I was always a bit disappointed with the Hulk figure that Target released exclusively for the "Incredible Hulk" movie a few years back, ...4 comments | ![[Savage Bloodlust Hulk] Hello Realmers, today I have something my girlfriend made which we call Savage Bloodlust Hulk! She took a Hulk (Smash & Crush) from the 2003 Hulk movie, drybrushed black onto the figure to give him a darker, dirtier, grittier look, painted his hair solid black instead of having green streaks, then the fun began! We went outside, laid him on some old newspaper, mixed up some really watery red and went to splashing and flicking the "blood splatter" all over him. She caked it on his hands (from all the smashing) and feet (from trudging through the carnage he created) with thick, darker blood and we made sure to get a good coverage all around. The last picture we just couldn't resist lol. This was just a quick mod, but it was really really fun, and I think it turned out incredible. Thanks for looking!
By the way, this was completely 100% all my girlfriend's idea... God I love this woman!](userimages/customs/39000/38624-1.jpg) Savage Bloodlust Hulk Incredible Hulkby Bad_Guy_RobotHello Realmers, today I have something my girlfriend made which we call Savage Bloodlust Hulk! She took a Hulk (Smash & Crush) from the 2003 Hulk ...9 comments |
![[Codename: FLUX] Codename: FLUX
Mission: Annihilate the Hulk
Here is one of the lesser known of the Hulk's enemies. He appeared in Hulk #17 and in the 2003 video game. I added pics of the inside pages from the comic book where he made his first appearance.
U.S. Army Private Tibbets was a soldier exposed to gamma radiation by the military to turn him into a weapon against the Hulk. Although he matched the Hulk's strength, his transformations made him appear freakish and disfigured. He also suffered psychological problems which made him unstable.
Recipe:
Head - Sandman from build a figure Spider-man movie wave
Body- SOTA SF Guile
Arms - Hulk, roaring one from 2003 movie
I was inspired by fastfreddie's past customs, specifically his Hulk's Greatest Hits. Thanks to you fastfreddie! So I'm starting my own line I'll call The HULK VS. Line.](userimages/customs/38500/38293-1.jpg) Codename: FLUX | ![[Venom-Hulk] a client wanted a Hulk that looked like the Venom symboite was taking over his body. I told him I just saw one recently on figurerealm and thanks to TOYMANCUSTOMS, who had made a beautiful version. I referred him to some of TOYMANCUSTOMS photos and he wanted me to try one with my take on it. I proposed him two versions, a toned down lighter model and a FF EXTREME VERSION. He chose to go with the less expensive toned down version and this is what I came up with. I did a peeled symbiote skin effect and some symbiote tendrils with hot glue. I sculpted up the ab area, sculpted spider symbol on his back and I sculpted a removeable Venom faceplate and added a automotive type paintjob complete with a ultra hard clearcoat finish. Hopefully, the FF EXTREME VERSION of this may come out someday.
G2G!](userimages/customs/38000/37971-1.jpg) Venom-Hulk Incredible Hulkby fastfreddiea client wanted a Hulk that looked like the Venom symboite was taking over his body. I told him I just saw one recently on figurerealm and thanks to T...24 comments |
![[Gray Hulk] Another rotocast repaint for someone who shares the same love for the Hulk as I do! He is trying to "out-hulk" me, but it's not gonna happen. This time he wanted a roto painted gray and sculpted pants. After washing it off, I sculptd the pants and then primed it in a dark gray. Applied some hand detailing and some airbrush shading. Sealed it and it's ready to ride..or jump
I figured it out! How to spell Gray or Grey...
Have you often wondered "Am I spelling g-r-e-y correctly...or is it g-r-a-y?". How do you spell the color grey or gray? Well, the answer is they are both correct. There are two acceptable spellings. Gray is used primarily in the United States and other areas that use US English. Grey is used in Great Britain and areas that use UK English
G2G 4Life!](userimages/customs/37500/37471-1.jpg) Gray Hulk | ![[Gray Hulk] Repaint of the MS Green Hulk. Went with some lighter shades from a reference photo. I really don't even like the Gray Hulk to be honest with you. I've always just been a green Hulk type of guy...but I will make some exceptions sometimes since he is a Hulk.
PS...who knows how to spell the Gray Hulk...is it GRAY or GREY??? I googled it but it seems everyone uses it both ways
G2G!](userimages/customs/37500/37468-1.jpg) Gray Hulk Incredible Hulkby fastfreddieRepaint of the MS Green Hulk. Went with some lighter shades from a reference photo. I really don't even like the Gray Hulk to be honest with you. I've...15 comments |
![[SKAAR Son of Hulk] Greetings all! I'm not gonna waste any time complaining about the ridiculous Skaar we got from hasbro, so onwards... The son of Hulk was on my list for a while, but I wasn't inspired to tackle him until I saw pictures of the Sideshow statue coming out this year... What a monster that thing is!! Anyway, he is a War Hulk body with a resculpted cast of a smart Hulk head. The lashings are a wide craft cord and the steel plates are styrene. Everything else is sculpted. The sword is styrene and the scabbord is shrink tube with sculpt and more cord. Oh, and the hair is from some wrestling chick. I started about 6 different shades of dull greens before I mixed one I liked, but like it I do. I'm really happy with the final look, and I hope you like him too. Comments or critiques? Keep on Blastin. T](userimages/customs/37000/36974-1.jpg) SKAAR Son of Hulk Incredible Hulkby ole jade jawGreetings all! I'm not gonna waste any time complaining about the ridiculous Skaar we got from hasbro, so onwards... The son of Hulk was on my list ...20 comments | ![[Hulkvenom] This is a commissioned piece base on an art concept , we used a rotocast 12 inch hulk movie figure , we sculpted the head, attached some wires to the body and sculpted the symbiote tentacles . apinted it with flat black acrylic paint and white acrylic paint for the spider logo . hope you like it guys!](userimages/customs/37000/36806-1.jpg) Hulkvenom Incredible Hulkby toymancustomsThis is a commissioned piece base on an art concept , we used a rotocast 12 inch hulk movie figure , we sculpted the head, attached some wires to the ...18 comments |
![[The Hulk / Nul Breaker of the Worlds] I just like to share a story about this custom figures, one day i ask one of my artist if he could find a new artist for me to hire , after a day or two my artist brought me this small and thin guy carrying a head sculpt , and then i ask him what is this made of , and he said it is made from mud from a rice field , he said that he cannot afford to buy a toy for himself when he was a child and so he just make one out of mud from a rice field, i was amazed on how skillfully he is, considering that they have no electricity and that he only use candle to lite the figure he is making, and so i ask him if he could do this custom fear itself custom figures , and it turn out to be alright considering that this is his first custom figure , nice job erwin! it is made of a red hulk select figure , sculpted the leg and arm area, lines are also sculpted. hope you like it guys!](userimages/customs/37000/36762-1.jpg) The Hulk / Nul Breaker of the Worlds Incredible Hulkby toymancustomsI just like to share a story about this custom figures, one day i ask one of my artist if he could find a new artist for me to hire , after a day or t...18 comments | ![[The Incredible Hulk] A repaint of a Marvel Select Hulk. I did modify the pants by cutting them from the knees and raising them up above the knee joint. I primed it and basecoated it with yellow and just went from there using paints from my extensive arsenal of liquid colors! This thing is really bright and I just took photos with the flash on the camera to show all the details. I like bold muscle definition if you guys didn't already know...lol! Well, thanks to my Lord and God bless you all.](userimages/customs/37000/36741-1.jpg) The Incredible Hulk Incredible Hulkby fastfreddieA repaint of a Marvel Select Hulk. I did modify the pants by cutting them from the knees and raising them up above the knee joint. I primed it and bas...24 comments |
![[Leader] A simple repaint of the Face-Off Leader Marvel Legends. I did fill in the peg holes and made some custom thrust flames for his boots. I added a weathered paint job to the armor and a high gloss finish. The head is interchangeable with the brain head Leader.
G2G!](userimages/customs/37000/36581-1.jpg) Leader Incredible Hulkby fastfreddieA simple repaint of the Face-Off Leader Marvel Legends. I did fill in the peg holes and made some custom thrust flames for his boots. I added a weathe...11 comments | ![[Leader] DCUC Manhunter body, this was customer request for me to make a custom armored Leader with a kind of futuristic looking armor or something. This is what I came up with without going overboard on the design. I added a shoulder pad from the Toybiz Beetle and sculpted the belt with the buckle coming from a model Tie-Fighter. The gun was from a Iron Man figure which was worthless for it. I filled in the peg holes with apoxie. The armor was given a weathered look and a gloss finish, along with his costume. The head is interchangeable with the variant big head Leader. I broke this figure down and sanded it all so it would be poseable without paint rub (thanks BUZZY FRET TUTORIALS)
G2G always and forever!](userimages/customs/37000/36580-1.jpg) Leader Incredible Hulkby fastfreddieDCUC Manhunter body, this was customer request for me to make a custom armored Leader with a kind of futuristic looking armor or something. This is wh...11 comments |
![[Madman] I present another cool character from the Peter David era. Madman is a Savage hulk body with a Gamma Hulk head. The pants got shortened from the calf up to the knee and everything on the head was resculpted except the mouth. Drooly string is clear jewelery cord with come liquid letex added to it. Special thanks to Cosmic, as he provided the body a while back when I had no other large Hulk sized figures to work with. Thanks for checkin him out. How'd I do? Keep on blastin. T](userimages/customs/36500/36184-1.jpg) Madman Incredible Hulkby ole jade jawI present another cool character from the Peter David era. Madman is a Savage hulk body with a Gamma Hulk head. The pants got shortened from the cal...17 comments | ![[Mindless Hulk] Planet hulk base, f.o. hulk head and arms.](userimages/customs/36500/36173-1.jpg) Mindless Hulk |
|