![[Steampunk Cobras] This is a group shot of the whole steam cobras project i will be posted the rest within the next few days
from Left to right
Mindbender-Firefly storm shadow -commander - bludd-destro -Baroness](userimages/customs/50000/49992-1.jpg) Steampunk Cobras G.I. Joeby RatfinkThis is a group shot of the whole steam cobras project i will be posted the rest within the next few days
from Left to right
Mindbender-Firefly sto...3 comments | ![[1/6 Custom "SOAP" Mctavish.] This is one of the characters for my upcoming stop motion project this coming summer 2013.
This project will include "GHOST" & "CAPTAIN PRICE"
This one is my own take on the character "Soap" in the cod series.
I gave him a custom sleeve tattoo to match his hardcore mohawk. The rest of his gear was hunted on ebay. Took me a while to figure it out how my characters would like, but there goes one hope you guys like it.](userimages/customs/50000/49990-1.jpg) 1/6 Custom "SOAP" Mctavish. G.I. Joeby o0ovco0oThis is one of the characters for my upcoming stop motion project this coming summer 2013.
This project will include "GHOST" & "CAP...2 comments |
![[Low-Light] Hey guys,
I'm proud to bring you one of my favorite ML Style Gi Joe customs, Low-Light.
I tried to stay as close to the original as possible.
The base figure was X-Men Classics Magneto heavily sculpted.
The head was a ML 2 pack Clint Barton also modded with goggles and knit cap.
The paint was Model Master acrylic.
Thanks For looking.](userimages/customs/50000/49863-1.jpg) Low-Light G.I. Joeby Wanderer-XHey guys,
I'm proud to bring you one of my favorite ML Style Gi Joe customs, Low-Light.
I tried to stay as close to the original as possible.
The base...7 comments | ![[Clockwork BAT] Had a lot of fun with this one. I've had this idea in my head for a LONG time, I just now got around to getting a BAT to try it out. I bought a bag of old watch parts a while back and have been sitting on them forever, I was going to use them for a completely different project but I've wanted to do a clockwork project for a while. I dremeled out the plastic junk in his torso, then replaced it all with a random assortment of gears and cogs. I added some to his elbow joints and to the flamethrower, but I didn't want to add TOO many so it got too busy. Paint job was pretty simple, just a bit of detail work on the head. Have two heads, the battle damaged one and an alt 'whole' one that is a cast from a friend.](userimages/customs/50000/49830-1.jpg) Clockwork BAT G.I. Joeby Zebus_0Had a lot of fun with this one. I've had this idea in my head for a LONG time, I just now got around to getting a BAT to try it out. I bought a bag of...3 comments |
![[Agent Helix] Hey guys,
Up next is my custom commission of Agent Helix from G. I. Joe.
It's just a Maria Hill base that's been sculpted over with Apoxy Sculpt.
Her blade is also a scratch build. She's hand painted with Model Master Acrylics.
Thanks for looking.](userimages/customs/50000/49813-1.jpg) Agent Helix G.I. Joeby Wanderer-XHey guys,
Up next is my custom commission of Agent Helix from G. I. Joe.
It's just a Maria Hill base that's been sculpted over with Apoxy Sculpt.
H...9 comments | ![[Cobra Hunter Mutant] Another Batman TDKR Quick-Tek launcher box was used for this Cobra Hunter Mutant. The box was weathered up and I printed out some nifty caution stripes/danger signs to detail them with. Cobra Hunter was made from a Zombie Viper body, Mum-rah hands, Luke Skywalker vs Clone Emperor lower arms, Storm Shadow lower legs, Mortal Kombat Reptile feet, ROC Storm Shadow sash, Retaliation Zartan hood, and a head from another Star Wars figure.](userimages/customs/50000/49810-1.jpg) Cobra Hunter Mutant G.I. Joeby Jin SaotomeAnother Batman TDKR Quick-Tek launcher box was used for this Cobra Hunter Mutant. The box was weathered up and I printed out some nifty caution stripe...3 comments |
![[Stormshadow] Here is my latest G.I. Joe custom of Stormshadow. This is basically a Bucky cap with a ton of sculpting. I think the head was a Shield grunt again heavily sculpted. The sword and arrow pack pegs in to his back. Swords have had their hilts re-sculpted for better fit. Bucky's tiny feet where re-sculpted to give better stability and get that ninja tabi look. Thanks again for looking.](userimages/customs/50000/49772-1.jpg) Stormshadow G.I. Joeby Wanderer-XHere is my latest G.I. Joe custom of Stormshadow. This is basically a Bucky cap with a ton of sculpting. I think the head was a Shield grunt again hea...13 comments | ![[Green Arrow V.1] Green Arrow is my favorite DC anti/hero so I had to enter one version, since I have a few more on going projects. Any how, I used a Retaliation Zartan as my base, removed the head and replaced it with some head I cut off of a broken figure my wife gave me. I had to drill a hole in the neck to fit the ball and sculpt the goatee paint it the hair and the eye mask. DG Storm Shadow hood, bow, and chest strap, Renegades Duke vest, Zartan quiver. I used Model Master paint for the new paint job, two shades of green, green zinc and another green. It was a little rushed, but I'm happy with version 1. and I hope you are too.](userimages/customs/50000/49721-1.jpg) Green Arrow V.1 G.I. Joeby To be revealed. . . Green Arrow is my favorite DC anti/hero so I had to enter one version, since I have a few more on going projects. Any how, I used a Retaliation Zartan...1 comments |
![[Bane] I used the Retaliation RoadBlock as my base because of the size compared to other Joe figures. First I popped the Rocks head off and replaced it with a Bane head from the movie figures, the ones with almost no articulation, also his gloved hand and dremeled a hole through it to fit on RoadBlocks arm. I picked the right arm to hide the hand replacement. I gave it a new paint job using Model Masters, a couple coats of skin tone and a wash with a green to appear like venom, also I used a flat black and dry brushed the blue for his pants. The head was the hardest, I sculpted over the face made the eyes and repainted. I added a venom tank to his back painted it green and dry brushed it with silver, I then used wire for hoses to his head and right arm. The last thing I did was add the cover over his neck to appear more like a mask and the computer thing on his right arm glove. Hope you like.](userimages/customs/50000/49691-1.jpg) Bane G.I. Joeby To be revealed. . . I used the Retaliation RoadBlock as my base because of the size compared to other Joe figures. First I popped the Rocks head off and replaced it with ...0 comments | ![[Centaur Wolf] I took a GI Joe timber and bashed on SHS Colossus added a lot of sculpt a viola.](userimages/customs/50000/49677-1.jpg) Centaur Wolf |
![[1/6 Custom Tattoos Version 3] Custom sleeve tattoo for 1/6 figures, its a custom vinyl my friend makes that I modify to fit a 1/6 figures. You can try sticker tattoo but way too messy special if u have a pet.
Btw this is my own take of "soap" Mctavish I think he shoulda had a sleeve tattoo to match his mohawk.](userimages/customs/50000/49629-1.jpg) 1/6 Custom Tattoos Version 3 G.I. Joeby o0ovco0oCustom sleeve tattoo for 1/6 figures, its a custom vinyl my friend makes that I modify to fit a 1/6 figures. You can try sticker tattoo but way too me...1 comments | ![[1/6 Custom Tattoos Version 2] 1/6 Custom sleeve tattoos, its custom vinyls my friend makes and i modify it.I tried the sticker tattoo but its too sticky and once you touch it it sticks on to your skin.](userimages/customs/50000/49628-1.jpg) 1/6 Custom Tattoos Version 2 G.I. Joeby o0ovco0o1/6 Custom sleeve tattoos, its custom vinyls my friend makes and i modify it.I tried the sticker tattoo but its too sticky and once you touch it it st...0 comments |
![[Custom Tattoos] A cheap way to make simple figures look bad a$$](userimages/customs/50000/49544-1.jpg) Custom Tattoos | ![[Ace] Different Marvel and halo mega blok figures](userimages/customs/50000/49539-1.jpg) Ace |
![[Tele-Viper] He's made up from different marvel an halo mega blok figures](userimages/customs/50000/49538-1.jpg) Tele-Viper | ![[Storm Shadow (Mega Bloks)] Storm Shadow was completed at the same time as my Snake-Eyes Mega Bloks figure. Painting the Cobra logo & eyes on something so small was a pain since it was my first time painting something that detailed so tiny.
Head- Mega Bloks Spiderman with sculpted eye hole piping
Torso & arms- MB Wolverine with sculpted chest strap & arm wraps
Cod piece with belt- MB Captain America
Legs- MB Red Skull with sculpted leg wraps
Weapons- special ordered katana,bow & arrows (not pictured) from minifig.cat & painted
Thanks for looking & let me know what you think.](userimages/customs/49500/49304-1.jpg) Storm Shadow (Mega Bloks) G.I. Joeby HellfireSamuraiStorm Shadow was completed at the same time as my Snake-Eyes Mega Bloks figure. Painting the Cobra logo & eyes on something so small was a pain si...2 comments |
![[Snake-Eyes (Mega Bloks)] It's been quite awhile since I last posted a custom. Snake-Eyes here was completed awhile back but I never got around to posting him on the site. I'll try my best to remember the recipe.
Head- Mega Bloks Black Spiderman with sculpted visor
Torso- MB Black Spiderman with sculpted bandolier/grenades
Upper arms- MB Venom
Lower arms- MB Wolverine (reversed) with sculpted bands
Legs/belt- MB Halo Arctic Pilot with sculpted pockets & knee pads
Weapons - uzi, katana, knife ordered from minifig.cat & painted, muzzle flare left from a broken DMC Dante gashapon figure.
I just had to make my own after seeing Shinobitron's way back.
The visor was the most difficult part since I resculpted it multiple times adding more detail each time until I was finally satisfied. The only other problem was paint rub on the back of the knee joints which was an easy fix after sanding & repainting. All in all I love the way he turned out. Let me know what you think & thanks for looking.](userimages/customs/49500/49303-1.jpg) Snake-Eyes (Mega Bloks) G.I. Joeby HellfireSamuraiIt's been quite awhile since I last posted a custom. Snake-Eyes here was completed awhile back but I never got around to posting him on the site. I'll...1 comments | ![[Hardball] As I am a denial in Joes, I can not say for sure what was the basis used, but I think is the Bull Slaughters Marauders 7pack, and various accessories. Resculpt head, putting him his cap and sunglasses. The rest was painting and adding accessories. Painted with matte vinylic paints and enamel silver](userimages/customs/49500/49281-1.jpg) Hardball G.I. Joeby Leo CustomsAs I am a denial in Joes, I can not say for sure what was the basis used, but I think is the Bull Slaughters Marauders 7pack, and various accessories....1 comments |
![[Python Patrol Scientist] Hardly a clue on recipe on this. The body is an old cobra body but I'm not sure what figure, it shares a torso with a cobra trooper but I'm not sure where ht armguard or the lower legs with spats come from. Head is Steve Rogers, goggles are from a Desert Viper and painted. I believe the hands are actually from a Marvel Universe Moon Knight. Lab coat is stolen from bondage Rex. Random belt with a pistol holster for his only weapon is under the coat.
Basically this was the quintessential scratch custom. I had a bunch of random stuff in a fodder pile and asked myself, "Can I make something out of nothing?" and did my best. Since I had already made a Python Patrol guy and like their uniforms gave it another shot. Got the idea because I had a Rex I bought for fodder and wasn't sure what to do with his lab coat.](userimages/customs/49500/49239-1.jpg) Python Patrol Scientist G.I. Joeby Zebus_0Hardly a clue on recipe on this. The body is an old cobra body but I'm not sure what figure, it shares a torso with a cobra trooper but I'm not sure w...1 comments | ![[Cobra Commander] hes made from an airstrike (house of m) wolverine torso, zemo head and thighs, savage dragon lower legs and dcuc joker shoes, upper arms from ml4 punisher, lower arms from ww2 ult cap, staff a mix of zemos and nagas and coat from roml punisher. sculpted mask and chest logo, then total repaint.
thanks for looking and all comments are greatly appreciated.](userimages/customs/49500/49235-1.jpg) Cobra Commander G.I. Joeby scarecrow studioshes made from an airstrike (house of m) wolverine torso, zemo head and thighs, savage dragon lower legs and dcuc joker shoes, upper arms from ml4 puni...15 comments |
![[Duke] Here is my take on "Duke" the G.I. Joe Field Commander.
Recipe:
Body- Amazing Spiderman 12" figure
Head- M.L. Icons Human Torch
Boots- Action Cape Batman 13" Figure
Hands- Sideshow Duke
Tactical Vest and straps are made out of foamies. The rest is military fodder and paint...
Keep an eye out for shipwreckk next...
Let me know what you guys think!](userimages/customs/49500/49177-1.jpg) Duke G.I. Joeby ChazzoHere is my take on "Duke" the G.I. Joe Field Commander.
Recipe:
Body- Amazing Spiderman 12" figure
Head- M.L. Icons Human Torch
Boots...5 comments | ![[Lobo] Hi there.
I updated my custom Lobo. Added some better looking spikes, longer chain,
edited his gun, some paint work-changed his black tank top into more comic
accurate green. The main change are the hair. Originally I used Ultimate Thor
head, luckily I found a chep Qanjin Vos/dread starwars jedi from vintage
line-ripped his hair putted them on Ultimate Thor head-painted black. Thanx to
those new hairs he has no head articulation because they hinder almost any
move.](userimages/customs/49500/49106-1.jpg) Lobo G.I. Joeby Bender1988DARTHi there.
I updated my custom Lobo. Added some better looking spikes, longer chain,
edited his gun, some paint work-changed his black tank top into m...2 comments |
![[Sgt. Airborne] Sculpted faceplate, pants bottoms, calf pocket, wrist straps, and collar. Custom tactical M249.](userimages/customs/49500/49052-1.jpg) Sgt. Airborne | ![[Cobra Destro 2.0 Weapons & Supplies Arms Deale] Been taking a break from making 6 inch Joes, but I just got back into it.
Here is a custom marvel legends style Cobra the Enemy- Destro. He was the terrorist organization Cobra's enemy weapons and supplies arms dealer, and the inventor of a lot of Cobra's Doomsday Weaponry like the Weather Dominator and the infamous Mass Device. Arguably one of the best villain characters in the cartoon and comic book series.
I wanted to make an imposing brawny version of him with two alternating heads. These shots are of the first head, the second was using a modified hitman head but I ended up liking this one more because it is so shiny which is a signature attribute of Destro I think. Neck Collar is from a spawn figure and Shirt collar from fodder. Used a lukebody, but did away with parts like the arms as I did not want paint rub. The chain was from a piece of jewelry and the gem is from a costume jewelry shop. Gun and Holster were from Venom and straps were made from fodder or sculpted. The rest](userimages/customs/49500/49025-1.jpg) Cobra Destro 2.0 Weapons & Supplies Arms Deale G.I. Joeby D&DCUSTOMSBeen taking a break from making 6 inch Joes, but I just got back into it.
Here is a custom marvel legends style Cobra the Enemy- Destro. He was the te...11 comments |
![[Alley-Viper] Wanted a more realistic version, so...
Parts swaps, modified parts, and sculpted details,](userimages/customs/49000/48984-1.jpg) Alley-Viper | ![[Cobra Clone with Cloning Tube and Doctor] What do you do when you need more troops? Grow them! Here we have a Cobra Cloning Tube with Clone Trooper and a Cobra scientist to help raise the little fellow. The tube was made from a Dr Dreadful 'alien slime drink kit' with parts removed, hoses/devices added, and modded with a bright blue LED underneath a lens. The Clone Trooper was a Marvel Universe Silver Surfer with sculpted breather/waist and creepy paint job. A RoC Doctor lower legs/Coat, basic Joe body, and MIB3 Boris head makes up the doctor and I gave him some tools so he could get to work on the clone. It's time to do science!](userimages/customs/49000/48944-1.jpg) Cobra Clone with Cloning Tube and Doctor G.I. Joeby Jin SaotomeWhat do you do when you need more troops? Grow them! Here we have a Cobra Cloning Tube with Clone Trooper and a Cobra scientist to help raise the litt...4 comments |
![[Cobra Zombie Viper Deployment Cell] We've had a lot of sub-par 3 3/4" lines and the Batman TDKR has flooded the market. Those Quick-Tek figures are being discounted at Walmart ($5.00 for two pack at Big Lots now) and are pretty terrible so I decided to figure out how to use them. Ditching the actual Batman figure I focused on the armor-on cases themselves....and decided to make them into deployment cells!
First I cut out more of the bat-symbol silhouette so it wasn't recognizable and removed all the logos, then dirtied it up with a new paint job/weathering, some swivel hinges at the top and stickers. The bizarre claw/gun/laser/whatever action-feature was removed so just the locking armor remained and I added chains and manacles to it.
A cobra Zombie Viper was combined with a Cobra Viper and with his vest on he fit into the armor, the manacles attaching to his feet or hands. The zombie could now be loaded into the armor-launcher and transported that way until it was time to deploy him on the Joes! You could use the](userimages/customs/49000/48943-1.jpg) Cobra Zombie Viper Deployment Cell G.I. Joeby Jin SaotomeWe've had a lot of sub-par 3 3/4" lines and the Batman TDKR has flooded the market. Those Quick-Tek figures are being discounted at Walmart ($5.0...6 comments | ![[Gi Joe Classic Baroness Inspired] Another gi joe inspired custom guys, i give you cobra baroness classic style just a repaint of ml madame hydra, added a dcd diana prince eyeglasses and cobra decal on the display base
thanx for the views/comments](userimages/customs/49000/48923-1.jpg) Gi Joe Classic Baroness Inspired G.I. Joeby ev214Another gi joe inspired custom guys, i give you cobra baroness classic style just a repaint of ml madame hydra, added a dcd diana prince eyeglasses an...4 comments |
![[Sgt. Slaugther] Two versions of the same figure. Basically a repaint of Retaliation Roadblock and headcast of Sgt Slaughter with vinylic paints and silver enamel in glasses. Oh, I also made the whistle and baton.](userimages/customs/49000/48920-1.jpg) Sgt. Slaugther G.I. Joeby Leo CustomsTwo versions of the same figure. Basically a repaint of Retaliation Roadblock and headcast of Sgt Slaughter with vinylic paints and silver enamel in g...3 comments | ![[Recondo Tiger Force] Just a repaint of the original Recondo and accessories, using vinylic paints and enamel silver.](userimages/customs/49000/48919-1.jpg) Recondo Tiger Force |
|