![[MOTUC Slime Pit He-Man and Slime Pit] Well to start off with I took a MOTUC Prince Adam buck and A He-Man head and added dropplets of slime individualy by hand using clear glue. Then I sprayed him with an all over coat of candy lime spray paint and rubbed dark green into all of the muscle deffinition and features. Next I dry brushed lots of shades of lime to almost florecent green and painted his eyes red. He was fineshed off with a coat of clear gloss spray.
The Slime pit was carved from foam boards and the Hordak head was a cast I took from a MOTUC Hordak and the claw was sculpted from scratch around a wire frame. The skull was the head of a MOTU 200X Battle bones re painted and screwed in place. There are 3 interchangable slime peices and one fixed peice in the mouth all of the slime was made from cling film (seran wrap) covered in hot glue that was painted to match the figure.
This was a tough job I hope yall enjoy it.](userimages/customs/43500/43178-1.jpg) MOTUC Slime Pit He-Man and Slime Pit | ![[Movie Consept Queen Marlena] Where would Randor be witout his Queen?
Here we have my movie consept Queen Marlena, she was made from a ml she-hulk with a beth pheonix head.
first I took shulk and removed her lags at the hip, then I took the princess figure from hell boy 2 and cut of the top half of her body and split the skirt halfway down the front and fitted the she-hulk body into it.
next I fitted the beth pheonix head to the ball joint at the neck.
I sculpted her hair, crown, sleaves chest, belt and coller, then I cut off the she-hulk hands and fitted the hell boy princess hands into the she-hulk glove tops and made the long outer sleaves from fabric hardened with superglue. Gave her a full paint job and added small gems to her nacklace and sash.
The staff is from a MOTUC marlena.
I think she looks like she exudes power just how the Queen of Eternia should. Im really pleased with how she turned out, hope you guys like here as much as I do. As always your comments are very welcome I love reading what you guys ha](userimages/customs/41000/40860-1.jpg) Movie Consept Queen Marlena |
![[Movie Consept King Randor] Hey guys here we have my movie consept King Randor.
I used a wwe figure not sure who it was then sculpted the beard hair and crown.
I dremled out a pair of 200x Triclops cuffs to fit the arms and sculpted his boot tops.
his red robe was made from a LOTR saruman skirt the belt was a plastic strip covered wit medical tape and I added a 200x tri-klops belt buckle.
the decorative chain was made from 2 strips of 200x tri-klops loin cloth and a gold thing that came with a hell boy figure.
The coat is a LOTR saruman coat with gold braid added at the sides. King Randors sword was a world of warcraft key ring and his septor is a star trek accsesory with a 200x cross from prince Adam, if I have missed anything out sorry.
Hope you all like him](userimages/customs/41000/40857-1.jpg) Movie Consept King Randor | ![[The Goblin Queen and Minions] I know that many have made the Goblin Queen before me but I needed her for my collection and this contest spered me on to get her done, so here we have Madelyne Pryor.
I used instantmold to make a mold of ML Phoenix face I cast said face in fixit sculpt then sculpted the rest of the head and her hair with green stuff.
I removed the wings and head from a wasp figure smoothed out her back and fitted the new head, then I cut off wasps legs mid thigh and fitted ML Storms boots.
Next I reshaped her lady pillows and sculpted all of her costume using green stuff.
The cape was made from fabric tattered with a sharp blade then stiffened with super glue, she was then painted head to toe with acrylic paints.
The Minions were repainted spawn figures and the bigger one was a primevil figure with LOTR orc armor and spawn figure horns added and baby Nathan Christopher was a dolls house baby with sculpted hair and nappy. The stand was made from foam board,
hope you like her guys.](userimages/customs/40000/39974-1.jpg) The Goblin Queen and Minions Marvel Legendsby custombaseI know that many have made the Goblin Queen before me but I needed her for my collection and this contest spered me on to get her done, so here we hav...6 comments |
![[Discworld Long Man Diorama] I made this discworld diorama as a gift for my aunt who is a big fan of the three witches ( as am I ) The Long man is a buryal mound well 3 mounds make up the long man hence the name.
I made the mounds and land from clay the entrence to the cave was made from foam board the trees are made from wire and medical tape with a coat of pva and polyfiller mix I added bushes grass flock flowers and lychen. I used clear rods to mount the miniatures ( all hand painted using acrylics ) and there you have it The three witches of Lancre flying over the long man](userimages/customs/39500/39365-1.jpg) Discworld Long Man Diorama Dioramaby custombaseI made this discworld diorama as a gift for my aunt who is a big fan of the three witches ( as am I ) The Long man is a buryal mound well 3 mounds mak...2 comments | ![[Prototype Infected Water Tower] I wanted to have someting to display my Alex Mercer figure so I came up with this Infected water tower.
First I made the tower from a twigglets tub and thin wire and made the roof from card, glued it to the tub and then painted.
Next I glued lengths of orange thread onto the tower in a veined network and then covered them in hot glue. I made a base for the tower from cardboard and garden mesh and attached to the towed. I hot glued the base of the tower then painted the cooled glue with red glass paint and while the glass paint was wet I covered it in orange embossing powder shook off and left to dry. I made a roof top for the tower and figure to stand on from foam board and fixed the tower to the roof and TA-DA there ya have it. Hope you guys like what ya see.](userimages/customs/39500/39159-1.jpg) Prototype Infected Water Tower Dioramaby custombaseI wanted to have someting to display my Alex Mercer figure so I came up with this Infected water tower.
First I made the tower from a twigglets tub an...2 comments |
![[Discworld: Granny Weatherwax's Cottage] I just got my hands on some micro arts Discworld miniatures and wanted more to desplay them on than the plastic base that came with them, This is the first time I have worked with miniatures, so here we have Granny Weatherwax, Nanny Ogg, Magrat Garlic and Giamo Cassanunda "the worlds smallest lover" outside of Grannys Cottage in Lancre. I made the walls of the cottage and the chimney from styrafoam pizza base and drew all of the stone work on by hand with a ballpoint pen, painted and fixed the walls together. The roof thatch was sculpted useing air dry fimo. Next I sculpted the door, window frames the privy, bench and all of the wood work from fimo and baked it hard, then the wood work was painted and the windows fitted with clear plastic that was dirtyed up with gray and brown washes and all of the wood work was fitted to the cottage. The ground was cut from a cerial box and sculpted over and the house was fitted to the ground, then the ground was painted dark green. The tre](userimages/customs/39500/39147-1.jpg) Discworld: Granny Weatherwax's Cottage Dioramaby custombaseI just got my hands on some micro arts Discworld miniatures and wanted more to desplay them on than the plastic base that came with them, This is the ...7 comments | ![[Eternos Palace] I wanted to make this diorama quite simple but reagle looking so as not to detract from the figures too much all of the stone work was made from foam board the railing posts are corrigated card and foam sheet. i made the walls from cardboard to give a slightly ridged effect all the walls were then covered in a pva and polyfiller mix. the wall lamps are made from some random armour from my fodder box and glass marbles. I re designed the eagle from the filmation palace entrance to go around the arch way and mirrored this on the ends of the bench I then took some swords and a sheiald from my fodder box to decorate the inside wall. I took some planters from a dolls house and filled them with lychen and flowers for card decoration then orange led lights were fitted into the lamps and inside the arch. I also added some small birds. I chose to paint this in the 200x colours rater than the filmation pink hope you like it](userimages/customs/39500/39040-1.jpg) Eternos Palace |
![[Alice Liddle with Madness Returnes Diorama] I made this Alice figure using a psylocke figure with deluxe buffy arms and a black ml x23 head with some hell boy figures hair. the dress is made from fabric hardened with super glue I sculpted the sleaves, skull on the back of her dress and the vorpal blade.
The Diorama was carved from foam board the big mushroom is from an old smurfs playset the other mushrooms and flowers are sculpted as is the butterfly body the wings are a printout and the plants are lychen](userimages/customs/39000/38765-1.jpg) Alice Liddle with Madness Returnes Diorama Miscby custombaseI made this Alice figure using a psylocke figure with deluxe buffy arms and a black ml x23 head with some hell boy figures hair. the dress is made fro...7 comments | ![[Lava Diorama] Hi guys this is just made from fome board with sand and glue,I used Bobtheodd's recipe for lava and the gargoyle is cast in plaster. I painted over the lava with a clear uv reactive paint that glows a redish orange hope ya like it guys](userimages/customs/37500/37303-1.jpg) Lava Diorama Dioramaby custombaseHi guys this is just made from fome board with sand and glue,I used Bobtheodd's recipe for lava and the gargoyle is cast in plaster. I painted over th...8 comments |
![[Madame Web] This Madame web was made using a ML Mystique torso, psylocke arms, dr who old lady head and the skirt blindfold and hair are sculpted.
the chair was sculpted from scratch and the web was made from wire and hot glue then I printed pics and fitted them into the web hope ya like it guys](userimages/customs/36500/36387-1.jpg) Madame Web Marvel Legendsby custombaseThis Madame web was made using a ML Mystique torso, psylocke arms, dr who old lady head and the skirt blindfold and hair are sculpted.
the chair was s...19 comments | ![[Movie Concept Prince Adam] This Prince Adam was made to fit in with my other MOTU movie concept figures.
I started with a wwe body and swaped the arms for wwe arms with short sleaves also I swaped the head for a wwe John Cena head.
I sculpted new hair and ponytail, then added a MOTUC prince adam jacket and power sword.
his cuffs are made from a ML first appearance Iron mans lower arms (dremled out to fit) with gems added.
The belt was made from plastic strips wraped in medical tape and a pouch and buckle from a 200X he-man.
The boot tops are sculpted.
Cringer is the same recipe that I posted ages ago.
hope you guys like it.](userimages/customs/34500/34377-1.jpg) Movie Concept Prince Adam |
![[Mumm-Ra and Ma-Mutt with Tomb Diorama] I wanted this Mumm-Ra to look less cartoony
Recipe:
LOTR ork: Head, hands, torso and feet
LOTR Gandalf: arms
LOTR Aragorn: legs
The bandages are medical tape and the hood and coat are made from bake and bend sculpy with cotton fabric for the raggedy bits, the fabric was soaked in super glue.
Ma-Mutt is just a re-paint with a bath chain added.
The Tomb Diorama was made using corrugated card board for the back wall, the stone pillars and the floor are foam board as is the sarcophagus.
The inside of the mouth was 2 layers of cardboard covered in toilet paper and pva, the rest of the tomb was sculpted from modeling clay covered with tp and pva then the whole tomb was given texture with a coat of pva and polyfiller](userimages/customs/34000/33940-1.jpg) Mumm-Ra and Ma-Mutt with Tomb Diorama Thundercatsby custombaseI wanted this Mumm-Ra to look less cartoony
Recipe:
LOTR ork: Head, hands, torso and feet
LOTR Gandalf: arms
LOTR Aragorn: legs
The bandages are medic...8 comments | ![[The Living OOZE] This Living ooze was sculpted using modeling clay and was then covered in lots and lots of layers of toilet paper and pva glue. Once dry it was then coated pith a pva and polyfiller mix.
The rotting tree was made from pipe cleaners toilet paper and pva and covered with the same polyfiller and pva mix, when dried the whole thing was painted with acrylic paints and then the ooze was given 10 coats of pva glue and water mix](userimages/customs/34000/33939-1.jpg) The Living OOZE Thundercatsby custombaseThis Living ooze was sculpted using modeling clay and was then covered in lots and lots of layers of toilet paper and pva glue. Once dry it was then c...7 comments |
![[Movie Concept Teela] Here is the next figure in my MOTU Movie concept line of figures.
Where would He-Man be without Teela? well I didnt want to know so here she is.
Teela was made from a ML she-hulk I sculpted new hair, alice band boot tops and all of the detail on her costume (the leaf thingys are bake and bend sculpy to retain movement) her boots are fabric medical tape. Her sword, sholder armour, and shield are from my fodder box, the staff of Ka was the top of a cane from a kiss figure and some plastic rods from my fodder box I think she came out ok, what do you guys think?](userimages/customs/34000/33580-1.jpg) Movie Concept Teela | ![[Ruined Arch Diorama] Hey guys I made this Ruin diorama to go with my MOTU Movie concept figures.
The whole thing was carved from foam board, the floor texture is a mix of sand and pva glue.
This was painted with acrylic paints I then added a little flocking, lychen and some long plastic grass. The metal ring was a rubber washer glued to a spare leg peg.
hope you guys like it.](userimages/customs/34000/33579-1.jpg) Ruined Arch Diorama Dioramaby custombaseHey guys I made this Ruin diorama to go with my MOTU Movie concept figures.
The whole thing was carved from foam board, the floor texture is a mix of ...6 comments |
![[Aetolia Bloodloch Diorama] A scene from the popular text based MMO Aetolia, showing combat ensuing between a Horkvali Monk and an Imp Indoran in the city of Bloodloch. The Imp indoran is using the signature hangedman card to bind his opponent before afflicting him with his demons and Moon tarot.
To make this diorama, I started by making the basic floor and walls from corrugated cardboard covered with PVA and toilet paper. To add texture it was painted with a mix of PVA and Polyfilla. The bank sign and door were made from old styrofoam pizza packaging, the floor covered with a mixture of PVA and sand. the rock spikes were carved from blue foam modelling board. The ropes were made from copper wire, wrapped in embroidery silk. The Tarot cards were made from Fimo clay and the magic effect made from clear plastic and hot glitter glue.
The Imp was made using LOTR Aragaorn legs, Boromir torso, NECA Fred Krueger arms and hands, a Stone Cold Steve Austin head with sculpted ears. His bone dagger was made from a plastic](userimages/customs/34000/33524-1.jpg) Aetolia Bloodloch Diorama Miscby custombaseA scene from the popular text based MMO Aetolia, showing combat ensuing between a Horkvali Monk and an Imp Indoran in the city of Bloodloch. The Imp i...3 comments | ![[Chaos Demons] Taken from the popular text based MMO Aetolia these are some of the Indoran's Chaos Demons. Pic 1 Bloodleech, pic 2 chaos slime, pic 3 chaos worm.
To make the bloodleech, I sculpted the body from Fimo clay, added legs from a plastic scorpion, used cocktail sticks for the teeth, sculpted lips with Fixit sculpt, painted with acrylics and used clear glue for saliva.
For the chaos slime, made the basic shape from tinfoil, and covered in hot glue. Painted with a mixture of acrylic paint and PVA then drybrushed with various shades of green, and given a coat of gloss varnish.
For the chaos worm, scuplted from fimo clay and painted with acrylics.](userimages/customs/34000/33522-1.jpg) Chaos Demons Miscby custombaseTaken from the popular text based MMO Aetolia these are some of the Indoran's Chaos Demons. Pic 1 Bloodleech, pic 2 chaos slime, pic 3 chaos worm.
To...3 comments |
![[Movie Concept Ram-Man] So on with my MOTU movie concept figures and here we have Ram man
RECIPE
Smart Hulk figure
Skirt, 1 cuff and shoulder armour: 200x Ram-Man
right cuff: 200x beastman belt
boot tops: foam sheet and wire
chest straps: medical tape
Axe: fodder
Hammer: ml baf ronan
Helmet: sculpt watch screws and foam sheet
I wanted this guy to look like a real heavy hitter
hope ya like him](userimages/customs/32500/32358-1.jpg) Movie Concept Ram-Man | ![[Movie Concept Sorceress] Here is my next MOTU movie concept figure, Where would any of the Masters be without the Sorceress?
RECIPE
ML She-Hulk
Wings 1980s MOTU Zoar
Skirt 200x Stratos
wand made from bits of fodder
every thing else was sculpted
hope you like her guys
Thanks for looking.](userimages/customs/32500/32357-1.jpg) Movie Concept Sorceress |
![[Movie Concept Orko] Well here is my next MOTU movie concept figure.
Orko was mostly made from fodder parts.
Recipe
Head, hands and torso: LOTR Gollem
Hat: brim is from a Gandalf hat the rest of the hat was sculpted and the band is made from medical
tape and wire
Arm: some hobbit arms
Coat also from a hobbit
Neckachiff: sculpted from b&b sculpy
Cape: Ithink its a LOTR skirt
Skirt: bottom of Gandalf skirt
bag: some hobbit
Wand: fodder
Ears: sculpted
Amulett: screw head and small gems
Base was carved from foam board and the candles and book are sculpted
Love to know what yall think](userimages/customs/32500/32344-1.jpg) Movie Concept Orko | ![[Movie Concept HE-MAN] Hey Guys,
I got to thinking about how I would like to see the MOTU look if there was ever to be a propper movie made.
So here we have HE-MAN.
Recipe:
BODY: wwe deluxe
HEAD: John Cena
CUFFS,LOIN CLOTH,ARMOR and Shield: 200x He-Man
Sword: MOTUC
AXE: fodder
HAIR: sculpted with bake and bend sculpy
BOOTS: medical tape and the boot tops are sculpted with Fixit sculpt
well I hope you like my take on how I think He-Man should look in a movie, I would love to know what you think](userimages/customs/32500/32343-1.jpg) Movie Concept HE-MAN |
![[Clay Face] This is my take on Clay Face, I took some WWE figure I had knocking around. I sculpted a completely new head then I cast some face's from other wwe figures and glued them to the body. then set about the whole figure with tons of model filler and fixit sculpt and a bit of hot glue (on the feet).
I painted the figure dark brown from head to toe then dry brushed the hell out of it with many shades of red and brown. hope ya like it guys. as always your comments are very welcome.](userimages/customs/31000/30512-1.jpg) Clay Face Batmanby custombaseThis is my take on Clay Face, I took some WWE figure I had knocking around. I sculpted a completely new head then I cast some face's from other wwe fi...1 comments | ![[B.a. Baracus with Work Bench Diorama] Now its my brothers birthday on thursday and he is a fan of the A-TEAM and we have a running joke about what B.A. really stands for, so I made him this B.A. figure. I took John Cena's body and sculpted socks with trouserlegs tucked in, Bib and braces, and a wide belt from fixit. Next I sculpted rings onto the hands I made clips for the straps out of fuse wireand glued some small plastic discs on for buttons. I sculpted feathers for his earrings from fixit his bracelets are made from cheap chain and rubber rings and his neck chains are also cheap chain.
The work bench diorama was made from a MOTUC white mailer box lined with corrigated paper and sprayed silver then dirtyed up and rusted with acrylic paint the floor, bench and wall suports are made from styrafome pizza base and the tool box was made from cardboard. The pipes are made from drinking straws and the tools are from a dolls house set. I also printed out some blue prints and a map of Quraguay( fans of the A-TEAM will be in the](userimages/customs/29000/28934-1.jpg) B.a. Baracus with Work Bench Diorama A-Teamby custombaseNow its my brothers birthday on thursday and he is a fan of the A-TEAM and we have a running joke about what B.A. really stands for, so I made him thi...14 comments |
![[Mystique] Hey guys, now this is somthing I have been wanting to do for a while now as I was not happy with the look of the toy biz Mystique.
What I did was take dcuc Raven and removed her arms, head and cape. I used a dremel to remove the extra plastic on her back and sculpted over her back with fixit.
Next I cut ravens lower legs of at about half way, then I fixed ml storm boots in place to make her a bit taller. The arms and head of ML Mystique were added I sculpted new hair from bake and bend sculpy. Now I add the skulls from ml figure for her belt and have to sculpt 4 new skulls because there wernt enough on the original figure to go all the way around the new body I also added a new skull to her forhead and painted from head to toe.
I think she came out quite well, she is a big improvment on the toy biz version anyway.
hope you guys like her.](userimages/customs/29000/28702-1.jpg) Mystique Marvel Legendsby custombaseHey guys, now this is somthing I have been wanting to do for a while now as I was not happy with the look of the toy biz Mystique.
What I did was take...1 comments | ![[MOTU Classics Shadow Weaver] Hay Guys, well this is a figure I started months ago but then couldnt think how to do the cape and so she sat around waiting to be finished off, then the other day I thought of a way that I wanted to try for the cape so here is how I made her.
I started by taking a ML She-Hulk and removed the hair. Next I took off here head, cut the finger off a latex glove and made a tiny hole in the tip of the finger and put it over the body with the neck peg through the hole and popped the head back on. I used fixit to sculpt her hood left to dry popped the head off and peeled the latex from inside.
I cut off the feet and carved the bottom of her legs into a peg that fits into the clear base of a plastic wine glass. Now I wanted to make my Shadow Weaver seem a bit creepyer without canging here look to much so what I did was cut off she-hulks lower arms about a 1cm below the elbow joint and then I cut the arms off of grendles mother at the elbow and atattched them to the she-hulk arms making the arm](userimages/customs/28500/28439-1.jpg) MOTU Classics Shadow Weaver |
![[Zombie Alley Diorama] I made this Alleyway Diorama for some of my mezco zombies out of all kinds of bits.
The floor is foam board covered in a pva and sand mix and the brick walls are made from the same foam board.
I made the chain link fence from garden mesh on a wire coat hanger frame, the wooden fence is made from styrafoam pizza base. most of the blood pools are made from hot glue (Not the pools with the female zombie).
The oil drum is made from an empty candy tube and the flames are carved from foam board with a hot knife. I made up a no entry sighn and some gig posters on my pc then put some images I found on the web togeter for a back drop and printed them out. Next I made rubbish bags by cutting a plastic bag into strips, then I folded the strips into sack shapes and taped along the bottom and one edge. I turned the sacks inside out so the tape is on the inside then I filled each sack with plaster of Paris and wound the tops up tight with twistie ties, piled them up in the corner of a box and until](userimages/customs/28500/28412-1.jpg) Zombie Alley Diorama Zombiesby custombaseI made this Alleyway Diorama for some of my mezco zombies out of all kinds of bits.
The floor is foam board covered in a pva and sand mix and the bric...5 comments | ![[200X King Grayskull] Hey Guys,
This is one of the simplest figures I have ever made.
All I did was take a 200x He-Man removed his hair and sculpted new hair from bake and bend sculpy (Tha braids have wire in them so they can bend into action poses or hang straight down)
I cut his cape out of a LOTR Gandalf cape and sculpted fur for the shoulders from b&b sculpy then painted with acrylics and there ya go one 200X King Grayskull](userimages/customs/28500/28077-1.jpg) 200X King Grayskull |
![[Kowl with Whispering Woods Diorama] Hey Guys, Well this is my first post of this year and it is Kowl with a Whispering Woods diorama. This was just an experiment to see if I could make a figure from scratch.
This didn't come out to bad for my first scratch built figure, what I did was start by making a wire frame for the feet and hands and sculpted over them with bake and bend sculpy once cooked I sculpted the claws with fixit sculpt. I made a body shape from tin foil and sculpted legs onto the bottom part with b&b sculpy for thewire from the feet to fit into, this meens that the feet and legs bend because of the wire inside. Next I made a robe from b&b sculpy along with sleaves for the hands to fit into. The pegs to atatch the arms to the body were made from nail heads. Then I made the ears/wings from b&b sculpy and sculpted the head from fixit sculpt, so his wrists and ankles turn, his feet hands arms and legs bend, his arms are articulated at the shoulder and his head turns. I painted him with acrylics and](userimages/customs/28500/28022-1.jpg) Kowl with Whispering Woods Diorama | ![[200X Count Marzo] Hi Guys this is my last figure of 2010, it is my take on 200X Count Marzo.
He was made from one of the many 200x He-Man figures (not sure what one)I swaped the head for a ML Mr Sinister head. Then I sculpted his greaves cuffes and armor added the cape from a lord of the rings figure and sculpter cape sides and shoulder braces from bake and bend sculpey and sculpted beard and hair. I made the amulet from fimo clay and the red enargy is twist ties and hot glue with red glitter in it then painted with red glass paint and the sword is from a Lady Death figure re-painted. hope you enjoy, as always your comments are most welcomed.
Thanks](userimages/customs/26500/26241-1.jpg) 200X Count Marzo |
|