![[Meggan V4] I wanted to do a Meghan using the new body sculpt. Swapped the head with the long haired variant X-Treme Rogue (cast by Face Customs) as I wanted the smile. Hair is storm, legs are Viper and feet are Savage She Hulk. Sculpted the arm and chest detail.](userimages/customs/50500/50040-1.jpg) Meggan V4 Marvel Legendsby WingsI wanted to do a Meghan using the new body sculpt. Swapped the head with the long haired variant X-Treme Rogue (cast by Face Customs) as I wanted the ...4 comments | ![[Ms Marvel Aka Warbird] I always thought Carol needed a curvier sexier figure than the Phoenix repaint we got during Toybiz's swan song. I swapped the feet for Viper and her right hand with a 2 Pack Wolverine fist. The head is the old Toybiz Mystique. Sculpted glove cuffs, boot tops, mask and smoothed the bikini out. Hair is 100% darice foam so articulation is retained. The symbol is also darice and the belt is a mash up from Warbird and Ryu.](userimages/customs/50500/50039-1.jpg) Ms Marvel Aka Warbird Marvel Legendsby WingsI always thought Carol needed a curvier sexier figure than the Phoenix repaint we got during Toybiz's swan song. I swapped the feet for Viper and her ...6 comments |
![[New Krypton Zod] Excited for the new movie next month I made a Zod from my favorite comic story that features him, the New Krypton saga.
Strait forward recipe, I took the uniform bits from Kal-el (gun, collar, and belt buckle). Green stuff for the 'sash' and beard. Then new paint with my own 'Zod' stylized Z. Sorry for the not so good pics phone camera is all I have to work with.](userimages/customs/50500/50038-1.jpg) New Krypton Zod Supermanby Zan-elExcited for the new movie next month I made a Zod from my favorite comic story that features him, the New Krypton saga.
Strait forward recipe, I took...0 comments | ![[Alien Politician from They Live] The aliens from "They Live" have always freaked me out, and during the making of Piper form the movie I knew I had to make one of those scary bastards. The body of X was perfect beacuse of the suit, the head is sculpted form scratch. I really like the outcome and hope you do as well!](userimages/customs/50500/50037-1.jpg) Alien Politician from They Live Horrorby toyguruThe aliens from "They Live" have always freaked me out, and during the making of Piper form the movie I knew I had to make one of those scar...17 comments |
![["Nada"(Piper) from They Live] Hey friends. So one of my fav movies of all time is "They Live". So while I was digging through the toy chest I found my Roddy Piper figure and the idea came to me. The figure of the nameless one must be made. So I "kicked ass and chewed bubble gum" til I was all out and took Piper's head, Duke Nuke em's body and sculpted the shirt and added a sweet paint job. Hope you guys like him!](userimages/customs/50500/50036-1.jpg) "Nada"(Piper) from They Live Horrorby toyguruHey friends. So one of my fav movies of all time is "They Live". So while I was digging through the toy chest I found my Roddy Piper figure ...23 comments | ![[Top Knot Predator 2.0 (Dark Horse Comics)] My Top Knot was done a while back but as I've gotten a little better at painting, I wanted to paint him more like a movie style version. I personally think fixing the skin was a must do after taking part in painting the lost tribe members.
Aside from fixing his skin, I also added a McFarlane classic Predator trophy necklace, repainted his dread rings, and added a second cannon power pack on his back instead of the medi kit.
Hope you guys like him.](userimages/customs/50500/50034-1.jpg) Top Knot Predator 2.0 (Dark Horse Comics) Predatorby CYCLONE_06My Top Knot was done a while back but as I've gotten a little better at painting, I wanted to paint him more like a movie style version. I personally...5 comments |
![[Classic Lobo] Savage Dragon upper boby, Undertaker figure lower body, jacket, hair, and Hook sculpted, Bishop's belt, gun, and lower legs. I used a custom decal paper to print out the Logo....](userimages/customs/50500/50033-1.jpg) Classic Lobo DC Directby TheAVEnewyorkSavage Dragon upper boby, Undertaker figure lower body, jacket, hair, and Hook sculpted, Bishop's belt, gun, and lower legs. I used a custom decal pap...4 comments | ![[Doomsday] One Abomination and a lot of sculpting](userimages/customs/50500/50032-1.jpg) Doomsday |
![[Man of Steel Cyborg Superman] Hey guys. I got one of these figures and wanted to do something fun with it. I love Cyborg Superman so I gave it a try. I simply took the figure and sculpted the heck out of him. I sanded down 3/4 of his face and then sculpted the face. Paint and time is all that was needed for this custom. Check out more pics of him on my Facebook page under Happy Day Customs.](userimages/customs/50500/50031-1.jpg) Man of Steel Cyborg Superman | ![[Solomon Grundy] One Red Hulk and a lot of sculpting for the hair and jacket as for the stand a repaint with arms!](userimages/customs/50500/50030-1.jpg) Solomon Grundy |
![[Ultimate Spider Woman] Ultimate Spider Woman Baby!
This lil Lady was a lot of work, and a lot of parts.
Head - Spiderman classics black suit spidy
Hair - Buffy figure
Neck and Upper Torso - ML X-23
Shoulders, Arms and boots ML Black Cat
Lower Torso and legs - ML Shadowkat
Hips and upper thighs - FF Classics Mr Fantastic
Apoxied White spider.
Loonng ut well worth it, very proud of this one...eyes are a little crocked and I forgot to add the black lines in the chest. but still really good. and seen most my stuff is packed figures I would show you her now as no idea when I can finish.
Video Review
youtube dot com/watch?v=0dUN1DwN3Xw](userimages/customs/50500/50029-1.jpg) Ultimate Spider Woman | ![[Ultimate Thor] Hey all this is my Ultimate Thor. very please with the end result.
Hair, Hands, Belt , Boots and Hammer - Marvel Select Ultimate Thor
Head - Wrestler Kevin Nash
Torso and arms - ML Frankenstein
Legs - WWE Undertaker
Apoxied the chest, and the gaps on side of belt.
Really love how this guy has turned out.
Second Pic is with my custom Movie Thor, simple hip swap and cloth cape.
Third pic is my in the works Custom Ultimate Captain America & Iron Man.
Here is a video review
youtube dot com/watch?v=7iS7gYfv3hs
Let me know what you think and thanks for looking.](userimages/customs/50500/50028-1.jpg) Ultimate Thor |
![[The NEW 52 Cyborg Superman] I took The NEW 52 Superman and sculpted parts of the arms legs body and face with a nice repaint..](userimages/customs/50500/50027-1.jpg) The NEW 52 Cyborg Superman | ![[Zilius Zox] Hi every body red lantern zilius,sculpted over a styro foam ball, after dried i drill in an articulated children's toy arms and feet, modified the fingers just like zulius have some sculpting on the gloves and boots,oh and a red lantern ring and painting details..thanks](userimages/customs/50500/50026-1.jpg) Zilius Zox DC Universeby rexticonHi every body red lantern zilius,sculpted over a styro foam ball, after dried i drill in an articulated children's toy arms and feet, modified the fin...5 comments |
![[Teela Chelsea Field Masters of the Universe Movie] This is my first commission work, it took three figures from the MOTU Classics line: (Battleground Teela, Princess Adora, and She-Ra), some Apoxy Sculpt, real leather, authentic Swarovski Crystals and a lot, A LOT of modifications, sculpting, sanding, mixing colors, and painting to build this figure.](userimages/customs/50500/50025-1.jpg) Teela Chelsea Field Masters of the Universe Movie Masters of the Universeby shakaThis is my first commission work, it took three figures from the MOTU Classics line: (Battleground Teela, Princess Adora, and She-Ra), some Apoxy Scul...6 comments | ![[Movie Skeletor Masters of the Universe Frank Lange] This is a DCUC base body that has had sculpting done for the all of the armor as well as the head. The cloak was made from a yard of black satin-like material. The pieces hanging from his chest are made of a pleather-like material that has had small cardboard squares cut and glued onto them then pressed hard to create a small indentation in them. The sword is a Legendary Heroes Conan sword with his hilt re-sculpted for Skelekor. The havok staff was made from a paint brush with sculpting added over the top of it.](userimages/customs/50500/50024-1.jpg) Movie Skeletor Masters of the Universe Frank Lange |
![[TMNT Gritty Toon Turtles] These are just the regular Nicktoons turtles figures with a reverse wash technique applied to them for a "gritty" effect. Some of the weapons have been modded with real chains and belt buckles have been added to the mix but other than that, they are just straight repaints of the existing figures.](userimages/customs/50500/50023-1.jpg) TMNT Gritty Toon Turtles | ![[Black Mask V.2 (Hand Carved Mask)] I read the bio on this character in my latest issue of GameInformer. I found it interesting that the mask he wore was carved from the wood of his fathers coffin. I was both intrigued and inspired by this and decided to give it a shot making a custom of him. His suit is based off his upcoming appearance in the new Batman game.
As for the mask, I wanted to try and carve one like he did. After 7 or 8 tries I finally got it good enough I was satisfied. A lot of eye strain and drimiling into this I hope u like it. Thanks!](userimages/customs/50500/50022-1.jpg) Black Mask V.2 (Hand Carved Mask) Batmanby PlasticSurgen88I read the bio on this character in my latest issue of GameInformer. I found it interesting that the mask he wore was carved from the wood of his fath...2 comments |
![[Ma'alefa'ak] I had no idea who this was when I saw his name on the list of figures I'm doing, but he's Martian Manhunter's evil twin. There weren't many reference pics to be found and my customer wanted the classic look rather than the look he had in Doom. I took creative liberty with most aspects, but tried to remain true to the overall design, and I think he turned out pretty cool. I used Mercury for the base, since Ma'alefa'ak is much smaller than his brother in the one pic I found of the two of them fighting. So, Mercury base, boots cut off and sanded smooth, hands removed and replaced with hands from an old ToyBiz Mojo, armor from Nite Lik, added eyebrow ring, real leather straps, and chains attached with magnets.](userimages/customs/50500/50021-1.jpg) Ma'alefa'ak | ![[Cluster] Hey guys,
Up next is my custom of Fantomex's female clone, Cluster.
It's just a Maria Hill/ Hope base.
The mask and ponytail were sculpted.
Got a coat from the fodder bid and sculpted on the collar and lapels to resemble the Fantomex toy out currently.
She's hand painted with the standard Model Master Acrylics.
Thanks for looking.](userimages/customs/50500/50020-1.jpg) Cluster |
![[Kid Omega] Hey guys,
Up next is my custom of Quintin Quire aka Kid Omega.
It's just a X-23 base that's been sculpted over with a reworked Superboy head.
He's hand painted with the standard Model Master Acrylics.
Thanks for looking.](userimages/customs/50500/50019-1.jpg) Kid Omega | ![[Phase the Shadow] Phase is another of that Shadow team I've been building. This guy is unique among the shadows in that he actually has feet, possibly to aid in melee fighting since he is a close combat specialist. This is pretty much just Supershadow with Tails' shows and a modded head along with armor bits and a new tail made out of super sculpey.](userimages/customs/50500/50018-1.jpg) Phase the Shadow Sonicby Wakeangel2001Phase is another of that Shadow team I've been building. This guy is unique among the shadows in that he actually has feet, possibly to aid in melee ...1 comments |
![[New 52 Captain Cold] Series 2/DC Minis #8: New 52 Captain Cold,
Just had to get back into making these again and this time I went with the New 52 version of Captain Cold, I don't read any of the comics but it seems he now has internal powers wich I thought was "Cool" so here is what I came up with
Head:Quicksilver (MU)
Arms/Torso:Steve Rodgers (MU)
Hands:FF Spider-Man (MU)
Legs:Punisher (MU)....the first one!
Jacket:Some Captain AAmerica figure (CA Comic series)
Sculpted:Glasses/Belt
more pics on facebook "Giant Size Customs"
Let me know what you think ? Thanks for looking](userimages/customs/50500/50017-1.jpg) New 52 Captain Cold DC Infinite Heroesby 3bcustomsSeries 2/DC Minis #8: New 52 Captain Cold,
Just had to get back into making these again and this time I went with the New 52 version of Captain Cold,...3 comments | ![[Iron Spider] The Iron Spider figure wasn't a good base figure to start with, I mean it had some good aspects but overall it wasn't very good. I thought I should at least give it a decent paint job. I gave him a darker red and gold done in paint pen. The arms were made out of layers of wire wrapped around each other and the ends of the original arms were put into place.](userimages/customs/50500/50016-1.jpg) Iron Spider Spider-Manby BluehawKThe Iron Spider figure wasn't a good base figure to start with, I mean it had some good aspects but overall it wasn't very good. I thought I should at...2 comments |
![[The Rocketeer] Ok did this type Rocketeer custom few years ago but I was never happy with the pants so I did another one!! Very simple receipt use the main parts from a Rocketeer figure helmet & jet-pack! The base I used a DC Universe Classic Mr Terrific but this time I used Johan Hex for the legs. Always enjoy doing a Rocketeer custom!!](userimages/customs/50500/50015-1.jpg) The Rocketeer D.C. Universeby JJ32Ok did this type Rocketeer custom few years ago but I was never happy with the pants so I did another one!! Very simple receipt use the main parts fro...1 comments on eBay Now! | ![[Prime] Hey everyone! Prime here is Dc Direct Superman with sculpey and several layers of paint.I was kind of going for an animated look. Check out more pics on my facebook page> louddarrylcustoms.
Thanks!](userimages/customs/50500/50014-1.jpg) Prime |
![[Machine Man] Machine Man is a once forgotten hero that recently been reintroduced into the Marvel Universe as a dimensional hopping hero. His reintro has given me a chance to bring a modern version of him into 3 Dimensional life. My MM has 9 different accessories that can be swapped in and out to make various weapons out of his hands/ arms. The gun arm can be merged with the claw to make an attack drone.
Machine Man is made from the following:
Body - DC Classics Shark
Head - WWE Justin Gabrielle
Coat - Nick Fury
Arms - Doc Ock
Hands - Johnny Cage
All the robotic arms, hands, etc are all various parts from my fodder bin!
Thanks for looking,
Shinobi](userimages/customs/50500/50013-1.jpg) Machine Man Marvel Legendsby ShinobitronMachine Man is a once forgotten hero that recently been reintroduced into the Marvel Universe as a dimensional hopping hero. His reintro has given me...14 comments | ![[Nightwing New 52] Its been a while since my last post, made this New 52 Nightwing using a DCU buck with the arms and legs from Batman, head is a cast of Arkham Nightwing (Big thanks to Hortons heroes)Hope you like him.
Steve](userimages/customs/50500/50012-1.jpg) Nightwing New 52 |
![[Iron Man 3 Iron Patriot Mega Bloks] Repaint only. Switched legs with spartan.](userimages/customs/50500/50011-1.jpg) Iron Man 3 Iron Patriot Mega Bloks | ![[Atom Smasher (6 Inch)] Hi everybody,
I wanted to do this for a while and was figuring out the parts for quite some time.
I had the idea by seeing the TV show where Atom Smasher was walking amongst the other JLA members in his normal size while not beeing in action. As there is only existing the DCUC BAF figure in 9 inch scale, it was about time to shrink him down to a 6 inch size to blend in with the other heroes.
I took:
the body from Omac,
the upper arms from Cyclotron and
the head of the golden age Atom.
Besides opening the figures to exchange upper arms I had to do some shaving on the wristbands and boots, followed by sanding the whole figure and sculpting the details. The belt gave me some headaches as it was important for me to keep the complete articulation (including waist articulation) and Apoxie Sculpt is everything but flexible.
Then I found a MOTU Fisto in my fodder and cuted his belt out of the figure which is soft and flexible. Cutted the belt into shape using the back part. Had to transfer](userimages/customs/50500/50010-1.jpg) Atom Smasher (6 Inch) |
|