![[King of the Dead] Mabuhay!This is an old custom but one of my favorite. I really wanted the ghoulish king version and the toybiz toy was already hard to find so I made one for our collection.
Thanks for all the comments on my last customs, I really appreciate it, though we do not know each other but I've seen your works also and I really like it a lot!!!! Hope you guys like this one.God bless!!!!
Base:lotr witch king
Head:helm's deep aragorn
Feet:wwe batista
Hand:tna lex luger
Sword:zombie spawn
Cape tie:new born lurtz whip
Crown:scratch](userimages/customs/28500/28270-1.jpg) King of the Dead Lord of the Ringsby fireflyMabuhay!This is an old custom but one of my favorite. I really wanted the ghoulish king version and the toybiz toy was already hard to find so I made ...3 comments | ![[Balrog] Hi! this is a custom I did before Christmas, but I never got around to listing him. He took a long time to do, I started him the day before thanksgiving, but anyway I sculpted the head and sword and then did a time consuming paintjob. The wings are from hades. I made him a bendable whip too but I forgot to take a pic. Thanks for looking and I appreciate all comments](userimages/customs/28500/28102-1.jpg) Balrog |
![[Turin Turambar (Tolkien`S the Silmarillion)] I used a body of Chronicles of Narnia figure, with the head of a Coronation Eomer, a Doc Samson's hair, gloves of a McFarlane Headless Horseman, and miscellaneous accessories (McFarlane, Neca, Marvel Legends, Toy Biz LOTR , etc.).](userimages/customs/28500/28082-1.jpg) Turin Turambar (Tolkien`S the Silmarillion) Lord of the Ringsby Leo CustomsI used a body of Chronicles of Narnia figure, with the head of a Coronation Eomer, a Doc Samson's hair, gloves of a McFarlane Headless Horseman, and m...1 comments | ![[Archangel Micheal] Been wanting to do a Archangel Micheal for awhile well here's what I came up with. LORT Gondor Soldier, added some wings from a Spawn Redeemer figure, and a sword from fodder. I added some flames effect for the sword to be the flaming sword spoken of in the bible. Did some bright orange with clear red paint apps for a realistic flame look. The Armor was painted with a pearlized silver to give a shimmer look. The wings on the helmet and back where painted white with a light drybrushing of the pearlized silver to give a pearlish look. Hope you enjoy and feel free to comments or suggestions!](userimages/customs/28000/27961-1.jpg) Archangel Micheal Lord of the Ringsby VaderThorBeen wanting to do a Archangel Micheal for awhile well here's what I came up with. LORT Gondor Soldier, added some wings from a Spawn Redeemer figure,...1 comments |
![[Thandruil, King of Mirkwood] Base: Celeborn (Pack Lothlorien LOTR Toy Biz)
Head: Punisher Movie (ML series 6)
hair: Gandalf (LOTR Toy Biz)
Fodder Parts](userimages/customs/28000/27896-1.jpg) Thandruil, King of Mirkwood | ![[Mirkwood Elvish] Base: Haldir (Pack Lothlorien LOTR Toy Biz)
Head: Wonderman (ML series 11)
hair: Eomer (LOTR Toy Biz)
Fodder Parts](userimages/customs/28000/27894-1.jpg) Mirkwood Elvish |
![[Slayer of Men DEMON] Took an Ork Archer from LOTR, added some wings on back with ball and sockets joints from Bionic kit and battle axe from a spawn figure (don't know the name of exact figure), then bloodied him up real good for the slaying he's been doing! Added some red glow in the dark paint in areas. The lighter red areas are those with the glow in the dark red paint such as ribs on the wings, battle axe and areas on the armor. Should be pretty easy to see what would glow and what wouldn't. Hope u enjoy, feel free to leave comments, what you like, what I could have done better, or just whatever is on your mind about this figure.](userimages/customs/28000/27875-1.jpg) Slayer of Men DEMON Lord of the Ringsby VaderThorTook an Ork Archer from LOTR, added some wings on back with ball and sockets joints from Bionic kit and battle axe from a spawn figure (don't know the...5 comments | ![[Angel of Death] Repainted armor for silver and goldish affect, with black undersuit to give a good contrast. The wings are fodder from who know's what figure. Did some grey drybrushing to accent/highlight details on the wings. The face and sword were given some red/black mix for bloodied effect. Hope u all like it.](userimages/customs/28000/27641-1.jpg) Angel of Death Lord of the Ringsby VaderThorRepainted armor for silver and goldish affect, with black undersuit to give a good contrast. The wings are fodder from who know's what figure. Did som...0 comments |
![[Dwarf Warrior] Head and legs of Gimli. Chest and arms of Eomer Coronation.
Clothes of LOTR and McFarlane. Helmet Bloodaxe (McFarlane`s Spawn Viking).
Painted with Vinylic Paints. Weapons and Shield: Randon figures.](userimages/customs/27500/27333-1.jpg) Dwarf Warrior Lord of the Ringsby Leo CustomsHead and legs of Gimli. Chest and arms of Eomer Coronation.
Clothes of LOTR and McFarlane. Helmet Bloodaxe (McFarlane`s Spawn Viking).
Painted with Vi...1 comments | ![[Urukhai Sapper with Helm's Deep Bomb] Mabuhay! The challenged was more on the weapon than the figure, the uruk were from lotr figures I only did some repaints,but all the helmets were custom made. The weapon is from an old christmas ball covered it with leather sheets put holes in it,the spikes are made from rubber,the handles are copper wires,the base from plastic then I painted it with black and silver acrylic to create the effect. Hope you all like it.God bless!](userimages/customs/27500/27242-1.jpg) Urukhai Sapper with Helm's Deep Bomb Lord of the Ringsby fireflyMabuhay! The challenged was more on the weapon than the figure, the uruk were from lotr figures I only did some repaints,but all the helmets were cust...9 comments |
![[Urukhai Scout] Mabuhay! Here's an uruk scout made from a wwe figure,every armor is made from rubber and leather sheets including the helmet. The sword from scratch .Thanks.God bless!](userimages/customs/27500/27241-1.jpg) Urukhai Scout Lord of the Ringsby fireflyMabuhay! Here's an uruk scout made from a wwe figure,every armor is made from rubber and leather sheets including the helmet. The sword from scratch ....4 comments | ![[Nazgul] Mabuhay! As part of my lotr collections here's my ring wraiths or nazguls. Hope you guys like it.God bless!
Base:dr.Dooms
Hood:rubber interior smeared with glue gun to create cloth effect,paint it with black acrylic then dry brushed it with gray plus white paint.
Armor: sauron's armor,witch king
Robe: sauron's cape
Weapons and accessories:scratch](userimages/customs/27500/27147-1.jpg) Nazgul Lord of the Ringsby fireflyMabuhay! As part of my lotr collections here's my ring wraiths or nazguls. Hope you guys like it.God bless!
Base:dr.Dooms
Hood:rubber interior smeare...5 comments |
![[Berserker Urukhai] mabuhay! I got this loose figure at an affordable price and decided to modify it, repaint it and gave it a more dreadful look,hand paint the white hand markings,blood stains,gave it an armor, did the arrow(detachable),the helmet, torch and sword are also made from scratch. hope you guys appreciate it.God bless!!!!](userimages/customs/27500/27070-1.jpg) Berserker Urukhai Lord of the Ringsby fireflymabuhay! I got this loose figure at an affordable price and decided to modify it, repaint it and gave it a more dreadful look,hand paint the white han...6 comments | ![[Isildur] Hi! Here is my latest custom, Isildur he is made from some DC super hero his armor is from various lotr figures. The sword was from elendil but was painted. I then painted all of his armor and his jacket. I hope you like him and I appreciate all comments](userimages/customs/27000/26991-1.jpg) Isildur |
![[Fat Dwarf Warrior] Base: Figure from MOTU 200X. I changed the arms and helmet with epoxy, added a beard and mustache. The armor is the Lord Blackthorn (McFarlane`s Ultima Online). Hands are some of McFarlane (I think the series is the Vikings). The axe has been modified of Raven Spawn. The hammer is the King Thor. Painting with vinyl and gold acrylic is applied with drybrushing](userimages/customs/26500/26199-1.jpg) Fat Dwarf Warrior Lord of the Ringsby Leo CustomsBase: Figure from MOTU 200X. I changed the arms and helmet with epoxy, added a beard and mustache. The armor is the Lord Blackthorn (McFarlane`s Ultim...4 comments | ![[Easterling] Thanx for all the feedback on sasori.Galactape, here's a custom of an easterling, one of my favorite characters in lotr, I used a wolverine figure for the base, the head: doctor doom,the armor: from old rubber interiors,mask and sword case:vynil tile.
Shield,sword, banner, helmet:scratch built.Hope you guys like it....](userimages/customs/26500/26056-1.jpg) Easterling Lord of the Ringsby fireflyThanx for all the feedback on sasori.Galactape, here's a custom of an easterling, one of my favorite characters in lotr, I used a wolverine figure for...3 comments |
![[Captain Easterling Banner Bearer] Just added new hands (the base was without), sword and scabbard. And did the spear and the banner. For the flag, found on the Internet image, print and glued onto plastic blister. Then, with a dryer, softening the plastic even put it in the position I wanted](userimages/customs/26000/25723-1.jpg) Captain Easterling Banner Bearer Lord of the Ringsby Leo CustomsJust added new hands (the base was without), sword and scabbard. And did the spear and the banner. For the flag, found on the Internet image, print an...1 comments | ![[Isengard Orc] Base: Orc Oversser with Legs of Grishnak, ande fodder parts.
Re-scupt face and hair with epoxy.
Painted with vinylic paints.](userimages/customs/26000/25722-1.jpg) Isengard Orc |
![[Uruk-Hai Warrior] Hi! Here is my uruk-hai warrior he is made out of an uruk-hai figure and I sculpted the chainmail and the helmet, then painted him, thanks for looking and I appreciate all comments, and happy Thanksgiving](userimages/customs/26000/25714-1.jpg) Uruk-Hai Warrior | ![[Isengard Orc] Thanx again for all the comments!, Panzervargas and everyone!! This is my custom orc from a spiderman figure. I want to have one but the price here in the philippines is way high so I decided to create one for my collection. Used epoxy clay for chains and fur, some leather strips for the belt and details. Hope you like it! God bless!!!](userimages/customs/26000/25701-1.jpg) Isengard Orc Lord of the Ringsby fireflyThanx again for all the comments!, Panzervargas and everyone!! This is my custom orc from a spiderman figure. I want to have one but the price here in...2 comments |
![[Battle Cry Urukhai] Thanks for all the comments, I am new at figure realm but it's humbling to read all your comments! Also I appreciate all customizers, you gave me inspiration to post my customs too. Here it is: the base is lurtz, thinned the hair widen its mouth, emphasized the forehead and jaw. The armor is made from old bike interior, shoulder armor, helmet and shield: vynil tile, banner: some leather sheet. The pole: baloon stick. Did a lot of mixing with the colors to make it look rusty.
And thanks also to galactape appreciate it man! Hope you guys like it god bless!!!!](userimages/customs/26000/25642-1.jpg) Battle Cry Urukhai Lord of the Ringsby fireflyThanks for all the comments, I am new at figure realm but it's humbling to read all your comments! Also I appreciate all customizers, you gave me insp...4 comments | ![[Vetran Uruk-Hai Berserker] Hi! here is my vetran uruk berserker he was pretty simple, just made the crest of the helmet and then a quick repaint. My next custom will be my second attempt at the mouth of Sauron. Thanks for looking, and I hope you liked him!](userimages/customs/26000/25632-1.jpg) Vetran Uruk-Hai Berserker |
![[Uruk-Hai Warrior] Hi! post number 30 for me, and I decided too post some of my custom LOTR collection,BIG THANKS TO YOU FIREFLY!, first is my uruk warrior I had 2 lurtz figures so I decided too turn one into a uruk warrior. I sculpted his helmet and sword completely from apoxie sculpt then I painted him (the white hands were the hardest part). I hope you like him and I appreciate all comments!](userimages/customs/26000/25631-1.jpg) Uruk-Hai Warrior | ![[Elven Guard Prologue] Base figure is legolas, I did the armor using thin leather straps, the helmet from old toy soldier helmet, the sword blade and case from old cd casing,the sword handle from scrap plastic. Hope you like it! God bless!](userimages/customs/26000/25583-1.jpg) Elven Guard Prologue Lord of the Ringsby fireflyBase figure is legolas, I did the armor using thin leather straps, the helmet from old toy soldier helmet, the sword blade and case from old cd casing...4 comments |
![[Snaga] It's an old custom, but I'd like to share it, the base is: a goldberg figure, I sculpted the head with epoxy clay, including the armor, added some chains to it. The weapons I made myself, hope you like it! God bless!](userimages/customs/26000/25581-1.jpg) Snaga Lord of the Ringsby fireflyIt's an old custom, but I'd like to share it, the base is: a goldberg figure, I sculpted the head with epoxy clay, including the armor, added some cha...4 comments | ![[Urukhai Commander] The base is lotr lurtz, for the helmet I've used some vynil tile and old rubber,for the arms, shoulder, chest armor I've used old rubber tires, I sculpted the leg armor with epoxy clay the sandals are made from old leather, the shield is also made of vynil tile
Used some smeared with glue gun for metal surface effects.](userimages/customs/25500/25463-1.jpg) Urukhai Commander Lord of the Ringsby fireflyThe base is lotr lurtz, for the helmet I've used some vynil tile and old rubber,for the arms, shoulder, chest armor I've used old rubber tires, I scul...4 comments |
![[Mordor Uruk-Hai] Uruk-Hai Warrior, with the lower legs and forearms of the Berserker Uruk-Hai and various parts of LOTR figures and McFarlane Kiss](userimages/customs/25500/25121-1.jpg) Mordor Uruk-Hai | ![[Full Armored ISENGAR URUK-HAI] Berserker Uruk-Hai, with the lower legs and forearms of the Uruk-Hai Warrior and fodder parts of LOTR figures and McFarlane Kiss](userimages/customs/25500/25120-1.jpg) Full Armored ISENGAR URUK-HAI |
![[ROHIRRIN SOLDIER with Horse] To make the rider I used a Faramir's body with arms, boots, clothing, sword, shield and helmet of the Rohirrin Soldier. The sheath of the sword and the cloak are of King Theoden. The hair, the top half was sculpted with epoxy and the lower half of Rohirrin Soldier.
For the horse, I used a Gandalf's Horse (Stormshadow), where repainted the muzzle, mane and tail. The cloth under the saddle is the Aragorn`s Horse (Armored Brego) and the saddle is a toy horse. The trappings of the saddle were made with pieces of rubber painted. Already in the harness horse's head made with pieces of belts of Legolas and that same toy horse already cited.
Finally, to get the spear, used a barbecue stick with sword blade attached to the top.](userimages/customs/25000/24871-1.jpg) ROHIRRIN SOLDIER with Horse Lord of the Ringsby Leo CustomsTo make the rider I used a Faramir's body with arms, boots, clothing, sword, shield and helmet of the Rohirrin Soldier. The sheath of the sword and th...1 comments | ![[Full Articuleted ELVEN ARCHER] Base: Body of Legolas + head, forearms, boots, clothing and accessories of the Elven Archer + Hair of Jean Grey (HML)](userimages/customs/24500/24414-1.jpg) Full Articuleted ELVEN ARCHER |
|