![[Wilycat] I saw this avatar figure and thought that this will be a good base figure for my concept Wilycat custom figure, head , hands,and feet are all sculpted. we just add some accessories from other figures!](userimages/customs/40000/39582-1.jpg) Wilycat Thundercatsby toymancustomsI saw this avatar figure and thought that this will be a good base figure for my concept Wilycat custom figure, head , hands,and feet are all sculpted...14 comments | ![[Tygra] Tygra, master of stealth and hand to hand combat, one my favorite character in thundercats series during the 80's . This is another concept custom figure to start the day, thanks a lot and we hope that you'll like it!](userimages/customs/40000/39581-1.jpg) Tygra Thundercatsby toymancustomsTygra, master of stealth and hand to hand combat, one my favorite character in thundercats series during the 80's . This is another concept custom fig...15 comments |
![[Cheetara] Cheetara was made from a babe o brian figure , the hair is sculpted, there are some modification in the nose, chest , hand and feet area.armors are from LOTR figures! our very first female thundercats concept art custom figure! we hope that you like it guys!](userimages/customs/40000/39563-1.jpg) Cheetara Thundercatsby toymancustomsCheetara was made from a babe o brian figure , the hair is sculpted, there are some modification in the nose, chest , hand and feet area.armors are fr...37 comments | ![[Slythe] This is a sneak preview of what the villains are gonna look like , our first villain in our thundercats concept custom figure. we used a gears of war action figure for this one , we sculpted the head, tail and the spikes, painted the entire figure with black acrylic and then dry brushed the whole figure, well we hope that you like it guys!](userimages/customs/40000/39562-1.jpg) Slythe Thundercatsby toymancustomsThis is a sneak preview of what the villains are gonna look like , our first villain in our thundercats concept custom figure. we used a gears of war ...36 comments |
![[Bengali, Thundercats Weaponsmith] I used a Thundercats Classics Tygra, removed his shoulder pad, cut it in half and made that in to the new shoulder covers for Bengali. I sculpted the straps using Apoxie Sculpt and then after they started to cure, I laid them out on to the base body and wrapped them around the figure allowing them to dry. He is painted entirely using Vallejo paints, the best paints for customizing as far as I'm concerned. I mixed my own original colors for some of my shading and highlighting. I styled him similar to the statue released a short time back. I have a hammer for him but it's not done so it's not pictured.](userimages/customs/39500/39396-1.jpg) Bengali, Thundercats Weaponsmith Thundercatsby BotCustomsI used a Thundercats Classics Tygra, removed his shoulder pad, cut it in half and made that in to the new shoulder covers for Bengali. I sculpted the ...5 comments | ![[Thundercats King Lion-O] This figure is one a heck of a scuplt, from head to toe it is sculpted, i have added some o parts from clash of the titans, spawn and conan figures to enhance it's attitude, wait for the other team members! hope you like it guys!](userimages/customs/39500/39367-1.jpg) Thundercats King Lion-O Thundercatsby toymancustomsThis figure is one a heck of a scuplt, from head to toe it is sculpted, i have added some o parts from clash of the titans, spawn and conan figures t...75 comments |
![[Mount Anguish] This is my Mount Anguish enviroment from the classic ThunderCats episode "The Doomgaze".
Only a fraction of Mount Anguish is shown in the cartoon so I had to design a lot myself. The Stonehenge-type monument was a little tricky, but it all worked out in the end.
Sculpted from scratch and painted with Revell model paints.](userimages/customs/39000/38893-1.jpg) Mount Anguish | ![[Lion-O with "Serene" Alternate Head] Many fans (myself included) disliked the way lion-o's face was released in the 6 inches figure. So to fix that cut out the "angry" lion-o face, the made a cast of a superman head, and carefully inserted it within the head. After filling the gaps with apoxie, I made a resin cast of the entire head and voila, lion-o in a more accurate portrayal, without the angry mug!](userimages/customs/38500/38171-1.jpg) Lion-O with "Serene" Alternate Head |
![[Jaga from Thundercats] Hello everybody... I don't know in other countries but here in Mexico, my country, we're on holidays... and for me is the perfect time to customize from night till dawn.
Here is he, Lion-o's spiritual guide, Claudis' counselor... the one and only JAGA.
For this I used a WWE wrestler, acrylic paints, epoxic clay for modeling the helmet, beard and eyebrows. The cape is made from fabric.
I'm very happy with the result... hope you like it as much as I enjoyed creating him.
As always any comment WELCOME and thanks for looking :)](userimages/customs/38500/38132-1.jpg) Jaga from Thundercats Thundercatsby xGARRIKxHello everybody... I don't know in other countries but here in Mexico, my country, we're on holidays... and for me is the perfect time to customize fr...13 comments | ![[Tygra] Another Thundercat member, the one with the power to become invisible, the one who designed the Cat's Lair.
Tygra was made from a WWE wrestler, the hair was made wih a little epoxic clay and painte with acrylic paints.
The scheme color is based on the one from the cartoon... hope you like it as much as I enjoyed to work on him.
Now I'm not sure if try to make Jaga or start with some foe, in which case could be Slithe or Mumm Ra, in both cases I'll need to find a good base figure... suggestions ?](userimages/customs/38000/37983-1.jpg) Tygra Thundercatsby xGARRIKxAnother Thundercat member, the one with the power to become invisible, the one who designed the Cat's Lair.
Tygra was made from a WWE wrestler, the h...17 comments |
![[Lion O] This is the third member I've created in order to assemble the Thundercats over my shelf. Here he is, Lion-O Lord of the Thundercats, the young boy trapped in an adult body.
For this I used a WWE figure, to be honest, don't know the name but the body and head fit perfect to be transformed into Lion O. The hair was sculpted with a little epoxy clay, same as the claw.
I took the color scheme from the cartoon character and the color scheme from the vintage action figure as reference.
I'm very pleased with the result, I think he looks very nice. Thank you for viewing and any comment is welcome !!
Now, Tygra is on the way :)](userimages/customs/38000/37970-1.jpg) Lion O Thundercatsby xGARRIKxThis is the third member I've created in order to assemble the Thundercats over my shelf. Here he is, Lion-O Lord of the Thundercats, the young boy tr...13 comments | ![[Panthro] I've been busy the last weeks, so I have not posted anything on the realm, but today I'd like to post a couple of figures I made time ago. Here is my favorite thundercat, the one and only Panthro.
For this, I used a WWE Ezequiel Jackson figure.
Some acrylic paint, little epoxic clay applications. I really love the result... Maybe Lion-O is the next on my list. Hope you like it and any comment, pleas, feel free to post :)](userimages/customs/38000/37839-1.jpg) Panthro Thundercatsby xGARRIKxI've been busy the last weeks, so I have not posted anything on the realm, but today I'd like to post a couple of figures I made time ago. Here is my ...9 comments |
![[Cheetara] I've been busy the last weeks, so I have not posted anything on the realm, but today I'd like to post a couple of figures I made time ago. Here is the girl from the "Thundercats" the always sexy Cheetara.
For this, I used just the same base as my Wonder Woman figure. A WWE Natalya figure.
Some acrylic paint, little epoxic clay applications. I really love the result... Hope you like it and any comment, pleas, feel free to post :)](userimages/customs/38000/37838-1.jpg) Cheetara Thundercatsby xGARRIKxI've been busy the last weeks, so I have not posted anything on the realm, but today I'd like to post a couple of figures I made time ago. Here is the...23 comments | ![[Thundacats Mummra Classic] 'ello everyone, this is my first thundercats custom, Mummra. i gave him some light up eyes, a custom cloth cape, added the wraps to him permanently, give him a few swipes of the old paint brush and viola!](userimages/customs/38000/37572-1.jpg) Thundacats Mummra Classic Thundercatsby Sabretooth'ello everyone, this is my first thundercats custom, Mummra. i gave him some light up eyes, a custom cloth cape, added the wraps to him permanently, g...12 comments |
![[Lion-O] Lion-O Repaint
Took the bandai version to the next level. Spray painted completely white, and repainted everything except the sword and Thundercats Symbols. Made him a little taller for a younger more teenage Lion-O by extending his neck with a magnet. Group shot last pic, so great to be able to finally have these figures I've dreamed about since a kid, wielding my own Thunder Cats Sword.
Thundercats Hoooooo!](userimages/customs/38000/37502-1.jpg) Lion-O Thundercatsby toxinvenomLion-O Repaint
Took the bandai version to the next level. Spray painted completely white, and repainted everything except the sword and Thundercats S...9 comments | ![[Mad Bubbler] Mad Bubbler figure articulated arms, elbows and head, held protopito never went on sale, 15 cm high mice !](userimages/customs/37500/37421-1.jpg) Mad Bubbler |
![[Claudus(W.I.P)] Mr Sinister With A Lot Of Sculpt And Foil Paper The Head Is An ORIGINAL SCULPT Made From Scratch
Still Needs Work On The Painting Side Of Things](userimages/customs/37500/37117-1.jpg) Claudus(W.I.P) Thundercatsby EmpcustomsMr Sinister With A Lot Of Sculpt And Foil Paper The Head Is An ORIGINAL SCULPT Made From Scratch
Still Needs Work On The Painting Side Of Things...4 comments | ![[The Demolisher] Thundercats This figure appears in the chapter that gives the same name to The Demolisher figure, who faces Mumm ra !](userimages/customs/37000/36961-1.jpg) The Demolisher |
![[Mirror Wraith] What Character From Thundercats to appear in Chapter Leah, is the Spectre of Mirror, THIS IS YOUR HAVE Figure articulated and flexible unfortunately!](userimages/customs/37000/36960-1.jpg) Mirror Wraith Thundercatsby instrumenttWhat Character From Thundercats to appear in Chapter Leah, is the Spectre of Mirror, THIS IS YOUR HAVE Figure articulated and flexible unfortunately!...2 comments | ![[Emeric the Petalar] This is my mini-statue of Emeric the Petalar, based on his appearance in the episode "Song of the Petalars". When I first saw the episode I was deeply touched by it and decided I needed to add little Emeric to my collection. For those that haven't seen the episode, go check it out!
Sculpted from scratch and painted with Revell model paints](userimages/customs/36500/36267-1.jpg) Emeric the Petalar |
![[Mumm-Ra 2011] Well,quite surprised to get this one finished today but got a real rush of motivation so here he is, Mumm-Ra the everliving from the new Warner Brothers cartoon.
Now some of you may know I had issues with Bandai's Lion-O figure, well the issues were ten time worse with Mumm-Ra, he was just so weak looking to me, short stumpy legs and a barrel chest, lack of articulation and the usual black joints. What's worse is Bandai actually call this the "Collectors line". Anyhoo, that's enough of that, i needed a big bad and imposing Mumm-Ra so I set to work. Here's the recipe:
Recipe:
Helmet and head = Bandai Mumm-Ra - dremmel to fit neck joint.
Bandages on head = white - LOTR lady elf skirt, sanded down, dipped in boiling water bent to shape then straight in cold.
Red - DCSH Supergirl cloak strips, sanded down.
Torso = ML Beta Ray Bill - sanded down discs, completely resculpted to include the chest symbol of Bandai Mumm-ra. Neck bandages sculpted. Magnet e](userimages/customs/36500/36132-1.jpg) Mumm-Ra 2011 Thundercatsby DarththomasWell,quite surprised to get this one finished today but got a real rush of motivation so here he is, Mumm-Ra the everliving from the new Warner Brothe...36 comments | ![[Tug Mug] away the legs and lot of epoxy for the sustitution and i was rely in the resul do appear as you see for the regular thundercats](userimages/customs/36000/35909-1.jpg) Tug Mug Thundercatsby wotan03away the legs and lot of epoxy for the sustitution and i was rely in the resul do appear as you see for the regular thundercats...2 comments |
![[Thundercats Custom Figures Batch 2] this is batch 2 of our thundercats custom figure that was done last april 2011, my only regret is that we never had the chance to take a good photo shots on this custom figs , what we used then are low resolution sanyo camera, somebody bought it to us and sell it on e bay for $ 500 , wow wish we knew that time how to sell on e bay! lol](userimages/customs/36000/35882-1.jpg) Thundercats Custom Figures Batch 2 Thundercatsby toymancustomsthis is batch 2 of our thundercats custom figure that was done last april 2011, my only regret is that we never had the chance to take a good photo sh...7 comments | ![[Thundercats Custom Figures] this custom figures was done last april 2011, it was our very first thundercats custom figure, love it a lot, love the color and sculpt , it was all done by my custom artist lyndon , who at that time are new in the team, such a talented kid, hope you like it guys!](userimages/customs/36000/35881-1.jpg) Thundercats Custom Figures Thundercatsby toymancustomsthis custom figures was done last april 2011, it was our very first thundercats custom figure, love it a lot, love the color and sculpt , it was all d...15 comments |
![[Panthro] Panthro -
Recipe:
Head - Original Thundercats Panthro
Body - Hawkman DC Direct
Nunchaku - Ninja Strike Wolverine
How I made:
Came across a loose Hawkman at Kobey's Swap Meet. I saw the potential it could be for a Panthro, after scheming on what head to use...I decided that the original head would be the best bet, and ironically it fit the body type dead on...I decapitated Panthro and the head connects to neck via magnets.
The spikes were pieces of Iron Man's Rubber Fire Bursts, cut and carefully double super-glued to his straps so they are rock steady. I know he's supposed to have overalls to be fully classic, but the way they were situated looked to me like a Savage Version of Panthro or maybe an alternate outfit...so I went with it and took a couple liberties with his costume.
Hand Painted the Thundercats Symbol. I even painted some fangs in his mouth if you look closely. I mixed a lot of paints to get slightly different tones of grey and blue. The Nunchakus were made from scu](userimages/customs/36000/35795-1.jpg) Panthro Thundercatsby toxinvenomPanthro -
Recipe:
Head - Original Thundercats Panthro
Body - Hawkman DC Direct
Nunchaku - Ninja Strike Wolverine
How I made:
Came across a loose ...13 comments | ![[Lion-O 2011] Hot on the heels of the awesome Thundercats Ho! competition I decided I needed a Lion-O to go with my Panthro. When I first got this figure I was quite happy with it but the niggles soon started setting in. The black joints, the super wide shoulders and that dang awful mid torso articulation started to really grate on me. Then I saw Boskoes amazing update and it proved to me this guy can look so much better. A couple days later I was browsing round Toys R Us and they had these movie masters for five quid each. I picked two of the up, Bruce and a Harvey Dent not really knowing what I would do with them. I got home and it hit me, Bruce just had to be Lion-O, I stood them next to each other and bang!! perfect scale match, work began and here's the recipe.
Recipe:
Head = 2011 Bandai Lion-O - dremmel to fit
Torso = Movie Masters Dark Knight Bruce Wayne Survival suit - fully sculpted armour with twistie ties for the trims to give nice clean edges.
Straps over shoulders = 2011 Bandai](userimages/customs/36000/35681-1.jpg) Lion-O 2011 Thundercatsby DarththomasHot on the heels of the awesome Thundercats Ho! competition I decided I needed a Lion-O to go with my Panthro. When I first got this figure I was qui...37 comments |
![[Mumm-Ra] I have no casting or sculpting ability but I've been wanting to make a Mumm-Ra figure with a spare MOTUC Skeletor for awhile now. When I saw the Icon Heroes Mumm-Ra staction, I bought it for display purposes, but once I received it I realized this was the look I wanted for my MOTUC style Mumm-Ra. So I decapitated my Icon Heroes Mumm-Ra, cut out his mummy wrappings as well as took his feet with shin guards so it would give him a little more height than the original MOTUC Skeletor although I lost articulation at the ankles. Carved/drilled out staction head to fit on MOTUC body and painted arm bands, chest symbol, and added his wraps. I repainted Skeletor loin armor becuase I like the MOTUC look and would allow more leg movement rather than a true style Mumm-Ra waist wrap. Took a red cloak from a Spawn figure I believe, and gave him the runeblade Frostmourne from WOW, at least until I can find a nice double edge blade fitting for Mumm-Ra. I'm happy with my first try, maybe at a later date](userimages/customs/36000/35636-1.jpg) Mumm-Ra Thundercatsby mikey0357I have no casting or sculpting ability but I've been wanting to make a Mumm-Ra figure with a spare MOTUC Skeletor for awhile now. When I saw the Icon ...12 comments | ![[Destroyed Thundera Display Base] Happy New year people! My buddy got me the new Grune the Warrior figure and its awesome! It's also the only loose 2011 TC figure I have. Since it's pretty hard to display a new 4 inch TC figure in a large collection of 80's LJN ThunderCats, I decided to create a small display base. I thought Grune would look good amongst the ruble of the kingdom he helped destroy. Sculpted from scratch and painted with Revell model paints.](userimages/customs/36000/35611-1.jpg) Destroyed Thundera Display Base Thundercatsby ZoltanMotherwellHappy New year people! My buddy got me the new Grune the Warrior figure and its awesome! It's also the only loose 2011 TC figure I have. Since it's pr...9 comments |
![[Lion O] Wanted to have this done for the contenst but with the holidays and the blessing of my little girl, I haven't had much time to customize,but alot of time went into Lion o that I still wanted to submit it! Snarf wasnt fully finished. Comments welcome! God bless and Happy Holidays](userimages/customs/35500/35255-1.jpg) Lion O Thundercatsby JunkyAssassinWanted to have this done for the contenst but with the holidays and the blessing of my little girl, I haven't had much time to customize,but alot of t...11 comments | ![[Mummra the Everliving] *FIGURE*
Mummra was constructed using a SOTA Street Fighter "Remy" figure.
-The torso actually incorporates two Remy torsos in the fact that two Remy figures were used to make it. If you notice, Mummra has two joints in the torso area to allow the added "decrepit mummy" effect.
-The arms and legs were longated using 1:18 scale G.I. Joe missles as the structural armature and then covered with Apoxie to add form.
-The head was sculpted out of Apoxie and is 100% original.
-The Hands and feet are from a Skeletor figure from the 2000x series.
*TOMB*
-Sculpted out of Baking clay.
-Magnets were added to the rims of the tombs two parts, then covered with a very thin layer of clay so that the tomb's lid locks securely when closed.
*Background*
-Packing styrofoam.
-The brick groves were carved out with an exacto knife then the structure was spray painted.](userimages/customs/35500/35135-1.jpg) Mummra the Everliving Thundercatsby KJL2381*FIGURE*
Mummra was constructed using a SOTA Street Fighter "Remy" figure.
-The torso actually incorporates two Remy torsos in the fact ...29 comments |
|