![[Hannibal King] It feels good to be going back to Marvel Movie customs, (my original mission statement on this site) and with that I bring you my favorite character in Blade Trinity (and probably everybody's favorite character in that movie), Hannibal King.
The first thing I did with the movie Punisher figure is remove his head, as well as his arms. I then took the head from a 50's Angel figure (Buffy), dremmeled it out and made it fit on the Punisher's neck peg. Then I cracked open the Punisher's torso and fit the shoulder joints and upper arms from a Legendary Riders Logan figure in it, and used the Forearms from the Punisher to give him that 3/4 sleeved look that he had in the movie. Of course doing that meant a lot of dremmeling on the forearm pegs as well as the inside of the Wolverine arms. Then I painted gloves onto the hands, painted over the Punisher skull on the shirt, and even painted the arms and neck the same flesh tone as the head I was using.
And speaking of the head, I had to do a l](userimages/customs/9000/8734-1.jpg) Hannibal King Bladeby CrimsonVampyreIt feels good to be going back to Marvel Movie customs, (my original mission statement on this site) and with that I bring you my favorite character i...5 comments | ![[Blade] I really wanted to do a comic book based Blade. He is a ML movie Punnisher and an altered Havok head. I added straps on his legs, back, and belt for his stakes, sword, gun, etc. His coat is from the ML Blade, the belt is from Captain America, and I think his glasses are from a movie Doc Ock.](userimages/customs/8500/8328-1.jpg) Blade Bladeby BalisconI really wanted to do a comic book based Blade. He is a ML movie Punnisher and an altered Havok head. I added straps on his legs, back, and belt for...0 comments |
![[Nomak - Blade II Movie] Finally, I completed a new custom. Again, I am presenting to you another character comes from the movie Blade II, Nomak, the reaper. This time, used much of epoxy sculpture, both to the head as for the jacket. Draw discrete veins in the head and Hands. I hope you like it. I would like to know your opinions and suggestions. Please, see my other custons. Thank you.
Recipe
Head - Bullseyes ML
Body - Longshot ml
Coat - Epoxie sculpt
Arms and legs - Blackheart ML
Boots - X-23 ML](userimages/customs/8500/8119-1.jpg) Nomak - Blade II Movie Bladeby LobãoFinally, I completed a new custom. Again, I am presenting to you another character comes from the movie Blade II, Nomak, the reaper. This time, used m...14 comments | ![[Abigail Whistler] Whistler's daughter was painted by James McNeill Whistler....no, wait. That's Whistler's Mother. Whistler's daughter was made by me. I noticed that the Faith figure didn't really look all that much like Eliza Dushku. Albeit, she didn't look as much like Jessica Biel as the McFarlane Texas Chainsaw Massacre figure, but my funds are a little low these days. It didn't take much. The belt came from a Wrarrl with a buckle made from one of the clasps on Conan's cape. The pistol on the belt is from a Palisade's Resident Evil Zombie Cop. I painted the red on Faith's coat to match Abby's from the movie. Gave the bow and arrows a coat of black. The arrow quiver is made from a sleeve and a strip of an extra Blade coat I had lying around. Little glue does the trick. And for fun, I took an extra Blade motorcycle (also lying around), and, in the words of Tony Stark, "Threw a little hot rod red in." Now I have the 'trinity' of Blade: Trinity. Thank you.](userimages/customs/7500/7490-1.jpg) Abigail Whistler Bladeby PureToreadorWhistler's daughter was painted by James McNeill Whistler....no, wait. That's Whistler's Mother. Whistler's daughter was made by me. I noticed that...5 comments |
![[Blade Trinity] This is the first of many custom figure projects to come this summer. I haven't posted a new one in forever so I'm making up for it with a plethora (that's right...plethora) of new customs.
This one is, of course, a movie Blade figure. I called it Blade Trinity, but really it's got aspects from all of the movies. I just really loved the red they put in Blade's outfit in Trinity.
So to begin, this figure was made with the ML Blade movie figure on top of movie Punisher's legs. I cut off the holster from the Punisher legs, used the strap on his right leg for the stakes to be glued to, and just glued the holster back on the other leg.
I also painted his shirt with red acrylic for some nice contrast, and did a black acrylic wash over it to make it look like a blood red shade. I also sanded down the handle of his gun, meaning he can actually hold it now! And I dry brushed it with some silver to make it look realistic. And I sanded down his glave as well, and painted it with Testors glo](userimages/customs/7500/7421-1.jpg) Blade Trinity Bladeby CrimsonVampyreThis is the first of many custom figure projects to come this summer. I haven't posted a new one in forever so I'm making up for it with a plethora (t...7 comments | ![[Blade Vampire Victim] So, I haven't contributed anything recently, but I have been working. This is one idea that came to me from minor inspiration by Redmist. In the pics of his Blade custom, he had taken a WCW wrestler and painted his a skin dirty, ashy black color. I thought to myself "Hey, they haven't made nearly enough vamps for Blade to fight and I have so many wrestlers laying around without heads, arms or other body parts." I had used Konnan's head for my movie Bullseye figure, so I ripped the flame off of one of my movie Ghostriders, put his skull in place, dremmeled a huge hole through the top corner of the skull to simulate a gunshot, then painted the skull and some of the shoulders a dirty black. Added some red, orange, and yellow paint dots plus I cut up the flame from GR and glued it randomly around the head to make it look like he's starting to burn up. Added the House of Chthon glyph tattoo on his hand with a sharpie marker and voila. Dying vampire. I plan to be doing a lot of](userimages/customs/7000/6643-1.jpg) Blade Vampire Victim Bladeby PureToreadorSo, I haven't contributed anything recently, but I have been working. This is one idea that came to me from minor inspiration by Redmist. In the pics...2 comments |
![[Blade] My old Blades legs broke off so I gave him some new ones and updated his look a little.
Base: ML Blade
Lower Legs: Ghost Rider (Ghost Rider: The Movie)
Jaket: Blackheart (Ghost Rider: The Movie)](userimages/customs/6500/6355-1.jpg) Blade Bladeby DDAMy old Blades legs broke off so I gave him some new ones and updated his look a little.
Base: ML Blade
Lower Legs: Ghost Rider (Ghost Rider: The Movi...4 comments | ![[Reinhardt - Ron Perlman] Again I show you a movie's custom. This time Ron Perlman's character Blade II, Reinhardt. I hate when launch a AF which doesn't have a villain to collect too. I have preference for characters of the Marvel movies. Sorry my English.
Head - Prof. ML X 09
Body - Punisher movie ML 06
Jacket - Vampire Xander Buffy / Angel
Arms - Blackheart Ghost Rider Movie
Glasses and weapon - wire, plastic and epoxy](userimages/customs/6500/6066-1.jpg) Reinhardt - Ron Perlman Bladeby LobãoAgain I show you a movie's custom. This time Ron Perlman's character Blade II, Reinhardt. I hate when launch a AF which doesn't have a villain to coll...10 comments |
![[Daywalker] Blade was made after seeing a sweet diorama statue depicting blade v Dracula in which he has a similar look. I shaved wolvie's hair, resculted the head, opened his mouth and built him teeth and fangs outta fimo clay. These pics don't show the details that well tho. IE: he has 2 tones of black(glossy and flat) has a blue light from his bluetooth com link, and his eyes are really detailed. I'm content w/ how the custom came out but not the pics. Either way, enjoy.](userimages/customs/6000/5939-1.jpg) Daywalker Bladeby RedmistBlade was made after seeing a sweet diorama statue depicting blade v Dracula in which he has a similar look. I shaved wolvie's hair, resculted the he...2 comments | ![[Redmist's Blade Take 2] Just some more pics I didn't get to submit last time](userimages/customs/4000/3568-1.jpg) Redmist's Blade Take 2 |
![[Hannibal King] Okay, if you've seen my other figures, you've probably figured out that I really only mess with characters from the Marvel Movies. That being said, Hannibal King NEEDED to be made. I used:
Head: Christian Cage (TNA) painted up a bit
Torso: Ninja Strike Wolverine (XMC) painted quite a lot
Legs and Upper Arms: Motorcycle Wolverine (XMC)
Lower Arms: Sting (TNA)
Leg Holsters: 2 Daredevils (Urban Legends)
Pistols: (Try not to laugh) Power Rangers
You'll notice, I uses the blue vest instead of black for decent contrast. I painted the target on his back and added the stakes from a ML Blade. But I just wasn't able to detail the "Hi, My Name Is F**K You" nametag, Nightstalker decoder ring or the Hello Kitty tattoo. Sorry. Stay tuned next time for The Blood Pack. Coming when I get around to it.](userimages/customs/3500/3091-1.jpg) Hannibal King Bladeby PureToreadorOkay, if you've seen my other figures, you've probably figured out that I really only mess with characters from the Marvel Movies. That being said, H...5 comments | ![[Blade] Thanks to AREZ for proving my suspicions about whether or not Blades torso would fit on a Movie Punisher pelvis. The old legs were made of a plastic that broke too easily or just couldn't support the weight of the figure. I went ahead and kept the holster because I found some weapons that Blade could actually grip, unlike the ones he came with. I painted the shirt red to give the figure contrast. (I'm goth and even I thought there was too much black.) I liked the knives that the Punisher's coat came with so I traded out. The machine pistol and shotgun came from the two female Fighting Force figures. The shotgun needed stakes, which I supplied from a Blade from the first movie. "And that's turning a frown upside-down."](userimages/customs/3500/3090-1.jpg) Blade Bladeby PureToreadorThanks to AREZ for proving my suspicions about whether or not Blades torso would fit on a Movie Punisher pelvis. The old legs were made of a plastic ...2 comments |
![[Blade 2099] Blade - 2099
Vampires took over all forms of goverment and have United Major Countries under their rule.
The human race is on the brink of extintion.
Humans are Slaves & Cattle used for Trade, Sex And Food !
Their are those who fight against and those who fight for . There are groups of revolutionaries who fight for freedom against the fang .
These upstarts are wanted as enemys Against the United Countries
#1 Most Wanted For several years Is " Blade " aka "The Day Walker"
The True Urban Legend he is part Man part Vampire he is a real pain in the neck to the United Countries
He is wanted for various crimes against the U.C. Criminal Charges Such As -
Civil Unrest, Murder, Weapons Possession , Arson, Assault, Assault & Battary, Theft, Armed Robbery, Vehicular Man Slaughter, Properity Dammage, And Numerous Traffic Violations.
With Out " Blade " The Human Race Would Have Been Extinct At Least We Still Have A Fighting Chance.](userimages/customs/3000/2750-1.jpg) Blade 2099 Bladeby GoldenwolfBlade - 2099
Vampires took over all forms of goverment and have United Major Countries under their rule.
The human race is on the brink of extint...7 comments | ![[Whistler Repaint] Repainted skintone and hair to match up and repainted the shirt and boots. Added pleather vest.](userimages/customs/2500/2428-1.jpg) Whistler Repaint |
![[Pris (Darryl Hanna)] This is Replicant android Pris from Blade Runner cult movie. It´s an android created to give pleasure.
I´ve used DC Zatanna ´cause I Had no other female figure which wanted to sacrifice. I´ve modified legs and arms, painted it, sculpted the hair, and made his dress with real panty stuff!](userimages/customs/2500/2201-1.jpg) Pris (Darryl Hanna) Bladeby AnesesThis is Replicant android Pris from Blade Runner cult movie. It´s an android created to give pleasure.
I´ve used DC Zatanna ´cause I...9 comments | ![[Blade] When I saw the new Gl figure Blade came into thought and I had to make him in JL style.](userimages/customs/1000/575-1.jpg) Blade |
![[Blade Bike b] I created this bike because it seems every review I've read on the figure
says the bike that comes with Blade is too small. And it is, so I created
one for him.
I used three motorcycles to create this one chopper and painted it black to
go with Blade as he rides through the night slaying Vampires and Reapers.](userimages/customs/500/195-1.jpg) Blade Bike b Bladeby pbodyI created this bike because it seems every review I've read on the figure
says the bike that comes with Blade is too small. And it is, so I created...0 comments |  Stikfas |
|