![[Black Panther [ Man without Fear ]] Hey guys here is the iconic Black Panther.For this version i wanted a more urban/military look so i went for the look he has in the comic Black Panther man without fear when he take over from DareDevil patrolling Hells kitchen.Recipe is as follows:Head is Black Panther/alternative head is dc John Stewart with sculpted hair and beard.Torso is stealth wolverine.Shoulders are ML Quick Silver.Biceps are captain america.Lower arms and hands are Black Panther.Fingers are Mr Sinister as the original claws looked to long.Legs are Punisher.Boots are Black Panther.Necklace scratch made.Belt is from fodder bin.All repainted,dry brushed etc.Hope you guys like,advice and thoughts are very welcome.Cheers.](userimages/customs/44500/44172-1.jpg) Black Panther [ Man without Fear ] Avengersby SOLORUNNERHey guys here is the iconic Black Panther.For this version i wanted a more urban/military look so i went for the look he has in the comic Black Panthe...21 comments | ![[Thor-Avengers Movie W/Interchangeable Arms] I wanted to do this for a long time, but didn' t have the pieces...yet. I' ve seen some pretty cool renditions of Thor in his avengers movie duds. Some with bare arms, some with armored arms. I liked both looks, and couldn' t decide for one or make 2 figures just with different arms, so I tried to make the arms swappable, for alternate display looks. And, well, it can be done! I used Thor body, cast head of walmart Thor, some wrestler hair with some sculpt, undertaker upper arms, John cena lower arms (my john cena left arm peg broke at my first try)sculpted bracelets and boots and painted the whole thing, minus the factory hands and cape.
Hope you guys like him. I' m certainly digging him!
More pics in my FB page, Isma Ringomendoza Bernardo.](userimages/customs/44500/44160-1.jpg) Thor-Avengers Movie W/Interchangeable Arms Avengersby ringomendozaI wanted to do this for a long time, but didn' t have the pieces...yet. I' ve seen some pretty cool renditions of Thor in his avengers movie duds. Som...11 comments |
![[Human Torch V2] Avenger #28,Yes I said Avenger...West Coast Avengers, not just Invaders. I had my 6" figure & have been wanting a 7" one. I found the Brightest Day Deadman figure & was hooked. He's a perfect bald base figure with clean lines...just had to cut away that Damned collar. Wouldn't you figure, it's not soft.
After really sore fingers I did the whole paint thing & gued on the Flamed pieces that were on my Toro ( he still has some). I wanted that menacing Look for Torch...just before he goes Nova! Any Thoughts?](userimages/customs/44500/44139-1.jpg) Human Torch V2 Avengersby CapSoldierAvenger #28,Yes I said Avenger...West Coast Avengers, not just Invaders. I had my 6" figure & have been wanting a 7" one. I found the Br...6 comments | ![[She Hulk] Time for another Avenger...She Hulk! I come across a Darkest Night Star Saphire Wonder Woman figure & just new she could be a great She Hulk. It took a LOT of shaving off trims & that Damned Pain in The *&%^$ Headband! Left a flat Alien looking forehead, so I clipped off sections in the back of her hair & glued them in front...making more of the She Hulk look.
Used Rubberband for top of her Boots, & cut the bottom trim of WW wristbands to blend into gloves. Then just paint, paint paint. Any thoughts?](userimages/customs/44500/44138-1.jpg) She Hulk Avengersby CapSoldierTime for another Avenger...She Hulk! I come across a Darkest Night Star Saphire Wonder Woman figure & just new she could be a great She Hulk. It t...3 comments |
![[Agent Coulson] I shaved Wesley' s hair off, sculpted a new forehead and a new hairline. I wanted to sculpt his nose and chin, but fixit kept falling off, I lost patience and ended up carving his nose to meke it thinner and sanding his cheeks. I chose Wesle because of the expression he had on his face, that "Coulson smirk" type. I don' t know, he does pass for displaying on my shelf, but he is far from a decent likeness. Any suggestion to improve him would be more than welcome.
Thanks for watching](userimages/customs/44500/44058-1.jpg) Agent Coulson Avengersby ringomendozaI shaved Wesley' s hair off, sculpted a new forehead and a new hairline. I wanted to sculpt his nose and chin, but fixit kept falling off, I lost pati...6 comments | ![[Bruce Banner Avengers Movie Version2] Just an update of my Banner custom. I re-sculpted hair, had the head casted and used the same Wesley body.](userimages/customs/44500/44055-1.jpg) Bruce Banner Avengers Movie Version2 |
![[Tony Stark Avengers Movie] Casted head from Glassman, MM Harvey Dent and the usual paint job. Hope you like him.](userimages/customs/44500/44054-1.jpg) Tony Stark Avengers Movie | ![[Count Nefaria] I purchased a Red Lantern Guy Gardner a short time ago,knowing it would work great for someone angry. Then about a week or so it came to me...Count Nefaria!!
I shaved the top of his hair down a little to achieve a decent hair for the count, then trimmed all the raised armor pieces off.
Pleathered out the Cloak, Belt, Gauntlets & Boots. The cloak cord is a Twist tie.
All that was left was a repaint. Any thoughts on this Most Powerfull Avengers Nemesis?](userimages/customs/44500/44047-1.jpg) Count Nefaria Avengersby CapSoldierI purchased a Red Lantern Guy Gardner a short time ago,knowing it would work great for someone angry. Then about a week or so it came to me...Count Ne...2 comments |
![[Avengers Movie Bruce Banner Post Hulk Experience] I had the head I sculpted for my first Ruffalo Banner reworked and casted, used Kamandi upper body, werewolf by night crotch and thighs, Angel lower legs and UFC feet heavily reworked; they were cut, glued to Angels legs and resculpted. The ankle articulation remains intact and fully functional. I also sculpted the torn pants on the lower legs, texturizing it with my own fingerprints.. I' m very happy with the feet trasplant, and with the figure, overall. Hope you guys like him!](userimages/customs/44000/43944-1.jpg) Avengers Movie Bruce Banner Post Hulk Experience Avengersby ringomendozaI had the head I sculpted for my first Ruffalo Banner reworked and casted, used Kamandi upper body, werewolf by night crotch and thighs, Angel lower l...23 comments | ![[Vox] STEVID(pronounced STEE-VEE-DEE), provided the base DCUC figure and sculpted the head. He primed this figure in black after sanding down the joints. I provided the forearms from a ML Yellow Jacket figure, filled in the peg holes with sculpt and sanded down the factory stamps. Coated it in a gloss black base coat, hand painted the line work, airbrushed for shading and cleared in a wet gloss. This was made for our good friend and collector, Twiztidtunes aka Thomas Wiley, who has one of the most extensive collections of custom Marvel figures going! Thanks for looking and may God richly bless you!](userimages/customs/44000/43880-1.jpg) Vox Avengersby fastfreddieSTEVID(pronounced STEE-VEE-DEE), provided the base DCUC figure and sculpted the head. He primed this figure in black after sanding down the joints. I ...11 comments |
![[Avengers Mark VI Iron Man] Here he is! A movie accurate Avengers Iron Man (which is sorely needed)! I repainted the figure, sanded down areas for scarring, dry brushed all the crevices, and even made the little dent in the top left-hand corner of the helmet made from Thor's head! Enjoy!](userimages/customs/44000/43809-1.jpg) Avengers Mark VI Iron Man Avengersby Universal CustomsHere he is! A movie accurate Avengers Iron Man (which is sorely needed)! I repainted the figure, sanded down areas for scarring, dry brushed all the...2 comments | ![[Avengers Movie Style Dark Spiderman] What If... Avengers movie Dark Spiderman. If Dark Spiderman were to appear in Avengers 2, this is what I think he'd look like. Very simple repaint of the classic Dark Spiderman figure. Hope it does the character justice!](userimages/customs/44000/43807-1.jpg) Avengers Movie Style Dark Spiderman Avengersby Universal CustomsWhat If... Avengers movie Dark Spiderman. If Dark Spiderman were to appear in Avengers 2, this is what I think he'd look like. Very simple repaint o...3 comments |
![[Movie Hawkeye Bratz] Basic recipe sand and body repaint. The sunglasses I had already just painted the pink sides black and went over the lenses with nail polish for the purple sheen effect. After that I cut his top, chaps and belts from vinyl and glued them into place. The top was painted and a shield symbol painted on his chest. That was it, now I hope I can get a set of bows and arrows to complete him. :-) Oh and photos look red and greenish because of the table clothe hopefully I can some better pictures later.](userimages/customs/44000/43757-1.jpg) Movie Hawkeye Bratz Avengersby RogueBasic recipe sand and body repaint. The sunglasses I had already just painted the pink sides black and went over the lenses with nail polish for the p...16 comments | ![[Superskrull Avengers Version] This custom figure is base from a concept art superskrull that was supposed to be released on a game but was cancelled. The base figure is from a 2 pack hulk series , shield and hammer are sculpted. hope you like it guys!!!!](userimages/customs/44000/43688-1.jpg) Superskrull Avengers Version Avengersby toymancustomsThis custom figure is base from a concept art superskrull that was supposed to be released on a game but was cancelled. The base figure is from a 2 pa...13 comments |
![[The Incredible Hulk] Avengers Hulk, head from Target exclusive Movie Hulk from the previous Hulk movie. Dremmeled the head to get it to fit, SEVERAL deep washes over a couple of days. This one is my personal favorite.](userimages/customs/44000/43636-1.jpg) The Incredible Hulk Avengersby LucidaemonAvengers Hulk, head from Target exclusive Movie Hulk from the previous Hulk movie. Dremmeled the head to get it to fit, SEVERAL deep washes over a co...8 comments | ![[Zombie Thor] Dremeled the wounds, sculpted the face and modified tje cape.](userimages/customs/43500/43489-1.jpg) Zombie Thor |
![[Loki] You knew it was coming. Loki just wasn't complete without them. While the Avengers Walmart exclusive Loki was great he was still missing the most important thing Tom Hiddleston brought to the character...wispy hair tips. Here I've revamped Loki to be more screen-accurate by resculpting his iconic movie hairstyling using Aves Fixit Sculpt. A single right shoulder pad was added as was his casual look but putting on the cape adds the second shoulder pad to complete the 'King Loki' image. His tunic was also lengthened, armor added to his forearms and a chest strap. Since the helmet would no longer fit I added a second helmeted head and gave his armor a brilliant gold finish with antiquing. A complete paint job in the proper black/brown/green colors made his details pop. Loki's staff was lengthened and a clear blue Mind Gem added. Now that's the Loki I remember seeing on the big screen!](userimages/customs/43500/43423-1.jpg) Loki Avengersby Jin SaotomeYou knew it was coming. Loki just wasn't complete without them. While the Avengers Walmart exclusive Loki was great he was still missing the most impo...17 comments | ![[Ultimate Hawkeye] I was in the market for an Ultimate-style Hawkeye with better articulation and a non-Jeremy Renner head; something that could go back and forth between my movie and Ultimates lineups.
I started with a movie Hawkeye and ditched his extremities. Used Winter Solider's legs, Pursuit of Cobra Duke's arms, Cobra Shocktrooper hands, and a Marvel Universe Steve Rogers head. I added some arrows to the quiver and rotated it for a right-handed bowman, slapped on a fresh coat of paint, and sealed him up with matte spray.](userimages/customs/43500/43420-1.jpg) Ultimate Hawkeye Avengersby davejuiceboxI was in the market for an Ultimate-style Hawkeye with better articulation and a non-Jeremy Renner head; something that could go back and forth betwee...5 comments |
![[Avengers Movie Thor] Another Figure I've been waiting to post!
I removed the Head and boots of the avengers mighty battler Thor figure. Completely repainted it, and then took the hair, and added a repainted buffy faith figure's hair.
I attached the Battler figure's boots to fodder ML figure's lower legs and sculpted pant's detail. I also cut the feet off of the Battler boots and dremiled in a concave and peg hole to add the ML Thor's feet. This way they have the same articulation as the ML figure.
As well I dremiled off the metal detailing on the original Thor movie pants, and sculpted it to look more like the Avengers costume.
Then repainted the rest of the figure.](userimages/customs/43500/43377-1.jpg) Avengers Movie Thor Avengersby pulpyfictionAnother Figure I've been waiting to post!
I removed the Head and boots of the avengers mighty battler Thor figure. Completely repainted it, and then...11 comments | ![[Avengers Movie Agent Phil Coulson] This is something old I haven't got around to posting.
I know he doesn't have his Cap trading cards and his big a$$ experimental gun, but I got photos before I moved, and I feel if I don't post him now I might never get around to it.
Recipe
Body: DKR Movie Master Scarecrow
Head: Heavily modified and re-sculpted DCUC Aquaman
Thanks for checking him out!](userimages/customs/43500/43376-1.jpg) Avengers Movie Agent Phil Coulson Avengersby pulpyfictionThis is something old I haven't got around to posting.
I know he doesn't have his Cap trading cards and his big a$$ experimental gun, but I got phot...9 comments |
![[Wonderman] just took a basic wrestling figure and painted him like wonderman and added some goggles](userimages/customs/43500/43313-1.jpg) Wonderman | ![[Luke Cage / Powerman] Welcome to my 26th Avenger...Luke Cage! I have thought of doing him for some time but couldn't find the right figure for what I wanted. When I found this Apollo Creed figure, this was it. I wanted more of a take on his traditional 70's hair, with the modern facial hair & a more flashy costume. I made the outfit out of Pleather again, with thick rubber bands for the Armored boots & belt. The headband is from a candybar wrapper, & the shoulder armor from a Judge Dredd figure. The base figure had only Boxing gloves...so I used a pair of War Machine 6" scale gaunlets. Any thoughts?](userimages/customs/43500/43221-1.jpg) Luke Cage / Powerman Avengersby CapSoldierWelcome to my 26th Avenger...Luke Cage! I have thought of doing him for some time but couldn't find the right figure for what I wanted. When I found t...6 comments |
![[Taskmaster] My Bro gave me some spare parts recently, & 1 of the items was a headless Batman Legacy Nightwing Collector Figure body. With all that awesome molded Body Armor I thought what an Great Taskmaster he could make...you know, Ultimates style!
I had a random head that I had prepped as a full facemask with the eyes painted, so I "Skulled" it up & attached it. Made hooded cloak w/ Pleather & painted it. Used my last spare Cap Sheild, & equipped him with spare part pouches & devices...& made Sword with spare parts. I'm stoked over this Custom's turnout! Any thoughts?](userimages/customs/43500/43049-1.jpg) Taskmaster Avengersby CapSoldierMy Bro gave me some spare parts recently, & 1 of the items was a headless Batman Legacy Nightwing Collector Figure body. With all that awesome mol...6 comments | ![[Captain America] Full re paint of movie Cap. Gave him a dirty weathered after battle look. Even has a lil dirt on his face. The pics really dont do this fig justice in my opinion.](userimages/customs/43500/43047-1.jpg) Captain America Avengersby JDMeg6314Full re paint of movie Cap. Gave him a dirty weathered after battle look. Even has a lil dirt on his face. The pics really dont do this fig justice in...1 comments |
![[The Avengers Cosmic Cube Tesseract & BRIEFCASE] Hi guys , I did a reworking for an old briefcase I had and I made it into The Avengers cosmic cube Tesseract & BRIEFCASE from the film.
I tried to make it look like nick furys case from the film & hot toys.
this is for a 6" figure & was loads and loads of fun to make.
thanks for looking](userimages/customs/43000/42990-1.jpg) The Avengers Cosmic Cube Tesseract & BRIEFCASE Avengersby snobticHi guys , I did a reworking for an old briefcase I had and I made it into The Avengers cosmic cube Tesseract & BRIEFCASE from the film.
I tried to...7 comments | ![[Avengers Iron Man Mk Vii] took a mk VI and turned it into a mk VII :)](userimages/customs/43000/42837-1.jpg) Avengers Iron Man Mk Vii |
![[Quasar] I came across this Superman/Batman Series 7 Aquaman Figure & thought the sculpting & Wrist Bracers would work Great for Quasar. A little bit of trimming & adding a pleather Tunic/Cloak combo...& BOOM! Then just repaint & cut away some of the more "wild" hair & he works!! I combined 2 of the most recent designs. Any Thoughts?](userimages/customs/43000/42755-1.jpg) Quasar Avengersby CapSoldierI came across this Superman/Batman Series 7 Aquaman Figure & thought the sculpting & Wrist Bracers would work Great for Quasar. A little bit o...10 comments | ![[Captain America Screen Accurate V2] This is my Cap custom v2 and is not as screen Accurate as the first one. I repainted him and give him an alternate head wich is the head from my first Cap custom. I also gave him the same base with the street light from my original custom Avengers set. His helmet is painted darker and I covered the star on his back. Last I did two sheilds like the Hot Toys one where one is scratched up.
Thanks for looking and I have something special and original for my 50th custom!
Have a good one!](userimages/customs/43000/42577-1.jpg) Captain America Screen Accurate V2 |
![[2012 Avengers Movie Hulk] Check out this Avengers Hulk my brother made for me. He sculpted the head based on stills from the movie. He attached the head to the body of the 2003 Toy Biz figure from the first Hulk movie and then painted it and dyed the pants. I watched him paint it, and he was concerned with adding the grey hairs that Ruffalo has and the covered-in-dust/dirt- quality the Hulk's skin has in the movie. It took him about a day to paint three of these.](userimages/customs/43000/42550-1.jpg) 2012 Avengers Movie Hulk Avengersby gregtasticCheck out this Avengers Hulk my brother made for me. He sculpted the head based on stills from the movie. He attached the head to the body of the 20...5 comments | ![[Giant Man] "easy" one here
just took the base figure, sanded the DD on the chest, the little horns and the club base on the left leg, added some epoxic clay on the same leg, painted a black base and then the outer colors with the "dry brush" technique, added the wire antennas and there he is, one of my favorite avengers!](userimages/customs/43000/42524-1.jpg) Giant Man Avengersby carlosdeanda"easy" one here
just took the base figure, sanded the DD on the chest, the little horns and the club base on the left leg, added some epoxi...24 comments |
|