![[Fire Megaman Mario] I used a Vinyl Megaman and the face from a Vinyl Mario. At first I was going to use the classic Megaman colors, but I thought it would be cooler to change the colors up. The Goomba was a PVC goomba, and I sculpted the helmet. I dont' remember where I got the base from.](userimages/customs/32000/31720-1.jpg) Fire Megaman Mario Nintendoby kodykoalaI used a Vinyl Megaman and the face from a Vinyl Mario. At first I was going to use the classic Megaman colors, but I thought it would be cooler to c...5 comments | ![[Misty Seduces Ash] I used a Pikachu, Mudkip, Ash and Misty Pokemon figures. The body for Misty is a hentai figure. I covered up all the naughty parts with a bikini to make it PG-13. I always thought that Misty should have gotten Ash's attention this way.](userimages/customs/32000/31719-1.jpg) Misty Seduces Ash Nintendoby kodykoalaI used a Pikachu, Mudkip, Ash and Misty Pokemon figures. The body for Misty is a hentai figure. I covered up all the naughty parts with a bikini to ...7 comments |
![[Dr. Mario and Nurse Peach] This is one of my entries to Iam8bit art show. For the Princess I used a vinyl princess peach head, a nurse Rei Ayanami torso, and legs from a hentai figure. For Dr. Mario, I used a vinyl Mario head, and a Dr. Hibbart body from the Simpsons. The hair was sculpted with apoxy sculpt. The table is from a World of the Simpson playset for Dr. Nick Riviera.](userimages/customs/32000/31672-1.jpg) Dr. Mario and Nurse Peach Nintendoby kodykoalaThis is one of my entries to Iam8bit art show. For the Princess I used a vinyl princess peach head, a nurse Rei Ayanami torso, and legs from a hentai...6 comments | ![[Zombie Hunter Toadette] Here is Zombie Hunter Toadette. For Toadette, I used a vinyl Toadette and some cleavage from a hentai figure. The bricks and blocks were from furuta choco egg toys. The cement tiles are LEGO 2x2 tiles that I roughed up. The rest of the parts are just random weapons that I had lying around](userimages/customs/32000/31652-1.jpg) Zombie Hunter Toadette Nintendoby kodykoalaHere is Zombie Hunter Toadette. For Toadette, I used a vinyl Toadette and some cleavage from a hentai figure. The bricks and blocks were from furuta...2 comments |
![[Zombie Princess Peach] This is one of my favorite pieces. The princess is made from a vinyl Princess Peach, Sailor Mars Legs, and arms/cleavage from a random hentai figure I had. Toad is pretty much the same except for the hole in his head. I used apoxy sculpt for the scenery.](userimages/customs/32000/31651-1.jpg) Zombie Princess Peach Nintendoby kodykoalaThis is one of my favorite pieces. The princess is made from a vinyl Princess Peach, Sailor Mars Legs, and arms/cleavage from a random hentai figure ...6 comments | ![[Pokemon SHINY Zoroark Tepig Zorua Reshiram] I just did a simple re-paint on these figures, so make them into their "Shiny" versions. I am giving them away as prizes for my youtube "Eevee-lutions" Contest. I used GW Citadel paints. Fun and easy to make, I suggest ya'll do the same if you have doubles of these figures! :D](userimages/customs/32000/31631-1.jpg) Pokemon SHINY Zoroark Tepig Zorua Reshiram Nintendoby cookiinI just did a simple re-paint on these figures, so make them into their "Shiny" versions. I am giving them away as prizes for my youtube &quo...2 comments |
![[Rush Anatomy Figure] This one was a little different than the other two. When I bought it, I thought it would be hollow like the vinyl Megaman and Gutsman. Boy was I wrong. The head was solid PVC. I had to use a dremel to hollow the head a little. The legs are from a transformers Ravage, and random robot parts I had lying around.](userimages/customs/32000/31630-1.jpg) Rush Anatomy Figure Nintendoby kodykoalaThis one was a little different than the other two. When I bought it, I thought it would be hollow like the vinyl Megaman and Gutsman. Boy was I wro...3 comments | ![[Gutsman Anatomy] I used the same formula for this as the Megaman. The only difference is that for the beefy hand, I used a Mecha Hulk hand. The rest of it was random robot parts I had lying around from other projects.](userimages/customs/32000/31629-1.jpg) Gutsman Anatomy Nintendoby kodykoalaI used the same formula for this as the Megaman. The only difference is that for the beefy hand, I used a Mecha Hulk hand. The rest of it was random...4 comments |
![[Megman Anatomy] I used a Megaman Vinyl figure and a bunch of spare robot parts that I had lying around. The main part of the robot is from a terminator figure.](userimages/customs/32000/31628-1.jpg) Megman Anatomy Nintendoby kodykoalaI used a Megaman Vinyl figure and a bunch of spare robot parts that I had lying around. The main part of the robot is from a terminator figure....9 comments | ![[Princess Peach] Do you notice a trend with my customs...lol. Here is Princess Peach. I thought Daisy needed to have a friend, so I made her. She is carrying her faithful servant toad. I used random Pinky Street parts for this also.](userimages/customs/32000/31595-1.jpg) Princess Peach Nintendoby kodykoalaDo you notice a trend with my customs...lol. Here is Princess Peach. I thought Daisy needed to have a friend, so I made her. She is carrying her fa...3 comments |
![[Princess Daisy] This is my first Pinky Street Custom figure. I wanted to do a character that wasn't as popular or mass produced. I decided Daisy would be perfect. I use random Pinky Street parts that I had. My favorite part is the little Luigi Doll.](userimages/customs/32000/31594-1.jpg) Princess Daisy Nintendoby kodykoalaThis is my first Pinky Street Custom figure. I wanted to do a character that wasn't as popular or mass produced. I decided Daisy would be perfect. ...2 comments | ![[Luigi Mecha] Here is the last one I did in the series. I wanted to find another unique way of putting a pilot in a Mech. It was only natural to put him in the chest. The hinges for the door were made using LEGO parts, and the computers in the cockpit are LEGO laptops.](userimages/customs/32000/31556-1.jpg) Luigi Mecha Nintendoby kodykoalaHere is the last one I did in the series. I wanted to find another unique way of putting a pilot in a Mech. It was only natural to put him in the ch...3 comments |
![[Yoshi Mecha] Here is another Mech that I did to go with the set. The cockpit was made using a Playmobil police control center and some LEGO laptops. The driver is a 1.5' Yoshi figure I picked up. At first I was trying to figure out how to get a cockpit on the head, but then I decided putting it in the nose would look a lot cooler.](userimages/customs/32000/31555-1.jpg) Yoshi Mecha Nintendoby kodykoalaHere is another Mech that I did to go with the set. The cockpit was made using a Playmobil police control center and some LEGO laptops. The driver i...12 comments | ![[Mario Mech] This is an old one that I wanted to share. My brother and I thought it would be cool to have Super Mario Characters driving giant Mechas of themselves, so I made them. I did this using a Mario Vinyl Figure and a Mario key chain. The cockpit is from an Avatar Amp suit. The rivets were straight pins that were drilled into the figure. That is one of the good things about using a vinyl figure, easy to drill into.](userimages/customs/32000/31554-1.jpg) Mario Mech Nintendoby kodykoalaThis is an old one that I wanted to share. My brother and I thought it would be cool to have Super Mario Characters driving giant Mechas of themselve...6 comments |
![[King Hippo Figure] This is an older custom, but I had to share it. I used a Blob Build-a-Figure, and sculpted the rest using Apoxy Sculpt. I have always loved the old school punch out, but I actually did this character design on the King Hippo from the Wii Version. The only thing I don't like about this figure is that the legs are not articulate. I went for form over function.](userimages/customs/32000/31512-1.jpg) King Hippo Figure Nintendoby kodykoalaThis is an older custom, but I had to share it. I used a Blob Build-a-Figure, and sculpted the rest using Apoxy Sculpt. I have always loved the old ...9 comments | ![[Obama Mega Man] I originally made this to be a part of the Armored Up contest, but I didn't get a chance to enter because I got busy doing some other projects. I thought the best way to armor up would be to become the Blue Bomber. I added battle damage just to give some more effect. The Base figure was an Obama figure and the Parts were from a Megaman Vinyl Figure.](userimages/customs/32000/31511-1.jpg) Obama Mega Man Nintendoby kodykoalaI originally made this to be a part of the Armored Up contest, but I didn't get a chance to enter because I got busy doing some other projects. I tho...3 comments |
![[Donkey Kong Cyborg] This was made using a Vinyl Donkey Kong figure, arms from an iron Monger, and other random robot parts I had lying around. I put a key in the back to make it like a battle damaged robot from Mario versus Donkey Kong.](userimages/customs/32000/31510-1.jpg) Donkey Kong Cyborg Nintendoby kodykoalaThis was made using a Vinyl Donkey Kong figure, arms from an iron Monger, and other random robot parts I had lying around. I put a key in the back to...4 comments | ![[Mr. L Aka the Green Thunder] Mr. L, also known as The Green Thunder, is Luigi's brainwashed counterpart, who made his first appearance in Super Paper Mario, serving as an acolyte of the evil Count Bleck(Check out Mariowiki for more info).
I couldn't find a Mr. L action figure so I made my own. Used a 4-5inch Luigi and sculpted mask, belt, and right index finger. Overall, I am please with this one! Thanks for looking friends! =D](userimages/customs/31500/31484-1.jpg) Mr. L Aka the Green Thunder Nintendoby OneUpMarioMr. L, also known as The Green Thunder, is Luigi's brainwashed counterpart, who made his first appearance in Super Paper Mario, serving as an acolyte ...3 comments |
![[Snifit] They stalk the plains of dreamwold Subcon taking aim at plumbers and innocent folk with their frightening masks. Every step of their weighted boots brings these orange nightmares closer to Wart's ultimate goal. It's Snifit from the world of Super Mario like you've never seen him before!
Snifit was made from a DCU Desaad body like his counterpart Shy Guy was, cowl from a ML Moon Knight cape, and custom sculpted face mask. His regular, gas mask, and flame thrower barrels are magnetic and can be swapped out on his mask. His boots came from a DCU Mr Freeze and lil t-rex type hands from a Spawn bendy demon. He has a jar of eyeballs (ammo? LOL) and a scythe hanging from his belt. What's under the hood? You'll have to wait to find out!](userimages/customs/29500/29415-1.jpg) Snifit Nintendoby Jin SaotomeThey stalk the plains of dreamwold Subcon taking aim at plumbers and innocent folk with their frightening masks. Every step of their weighted boots br...8 comments | ![[Shy Guy] They stalk the plains of dreamwold Subcon cloaked in red and wearing pale masks. Every step of their weighted boots brings these walking nightmares closer to their goal, whatever that is... It's Shy Guy from the world of Super Mario like you've never seen him before! Shy Guy was made using the mask from the pvc character, DCU Desaad body, Mezco Spirit hands, and SOTA Guile boots. His chaingun was made from a HoM Iron Man weapon and Spawn Interlink 6 gatling cannon](userimages/customs/29500/29272-1.jpg) Shy Guy Nintendoby Jin SaotomeThey stalk the plains of dreamwold Subcon cloaked in red and wearing pale masks. Every step of their weighted boots brings these walking nightmares cl...12 comments |
![[Spike Blop] Several blobs of green slime, each wearing a red, spiked turtle shell on top of its' head, ooze across the floor in your general direction. Before you can do anything about them, something suddenly slams into the ground beside your feet, narrowly missing you--it's another one of the creatures! Upside-down, its' sharp spines impaled in the earth, the gel wriggles madly as it attempts to free itself. Glancing upwards, you're dismayed to find several more of the gooey monsters slithering across the ceiling directly above you. As if on cue, they release their sticky grip on the stone surface and plummet downwards . . .
--------------------------------------------------------------------------------
Spike Blops are armored slime monsters that can be encountered in 2009's Nintendo Dual Screen (DS) Mario & Luigi: Bowser's Inside Story roleplaying video game (RPG).
Spike Blops have two methods of attack that they can employ: First, they simply charge into their opponents, skewering th](userimages/customs/28000/27760-1.jpg) Spike Blop Nintendoby PatrawSeveral blobs of green slime, each wearing a red, spiked turtle shell on top of its' head, ooze across the floor in your general direction. Before you...1 comments | ![[T.J. Combo] Here's my first custom action figure: T.J. Combo from Killer Instinct
I used as base a Jakks Pacific WWE Backlash Bobby Lashley figure because that figure doesn't look like Lashley except for the face.
I started cutting the arms at the biceps to add articulations there with a pair of screws. Then I sanded the face to make it thinner and to take off the little beard.
Then I made the borders of the shirt and the shorts with epoxy clay and then painted the figure torso with acrylics.
Next step were the boots. They were black so I masked them with epoxy clay so I could paint them cyan, trying to keep the ankle articulations functional.
Then I made the hair based on pictures of the character and finally I made the boxing gloves covering the hands with epoxy clay and keeping the wrist articulations functional](userimages/customs/23000/22956-1.jpg) T.J. Combo Nintendoby jizahlHere's my first custom action figure: T.J. Combo from Killer Instinct
I used as base a Jakks Pacific WWE Backlash Bobby Lashley figure because that f...2 comments |
![[Jago (Killer Instinct)] This order was basically a complete remake of the base figure. all the clothes and details were sculpted except for the wrist bands which came from a Wonder Man. The sword and sheath are from the McF Halo toys. Its a complete repaint. Thanks for looking](userimages/customs/21500/21442-1.jpg) Jago (Killer Instinct) Nintendoby Anthony's CustomsThis order was basically a complete remake of the base figure. all the clothes and details were sculpted except for the wrist bands which came from a ...17 comments | ![[Conker the Squirrel] Conker from the great video games Conker's Bad Fur Day and Conker: Live and Reloaded. Includes Wad of Money accessory. Base was a Zak from Secret Saturdays figure with Head, hands, and feet sculpted. Has a real zipper, real soft fur, and a posable wire tail.](userimages/customs/21000/20736-1.jpg) Conker the Squirrel Nintendoby Rust This WorldConker from the great video games Conker's Bad Fur Day and Conker: Live and Reloaded. Includes Wad of Money accessory. Base was a Zak from Secret Satu...4 comments |
![[Punch out Little Mac] Here is My version of Punch Out's Little Mac.I used a Rocky figure with a Karate Fighter head.You will see my Super MachoMan with him to show how tall he is to him.Enjoy:)](userimages/customs/20000/19666-1.jpg) Punch out Little Mac Nintendoby inuyasha82Here is My version of Punch Out's Little Mac.I used a Rocky figure with a Karate Fighter head.You will see my Super MachoMan with him to show how tall...1 comments | ![[Doubledragon Will V2.] He back with a whole new hair to look more like the video game.I used the same will figure with the toybiz Sting head on Billy Lee's body and hot glued the Elvis hair on him. Enjoy:)](userimages/customs/20000/19664-1.jpg) Doubledragon Will V2. Nintendoby inuyasha82He back with a whole new hair to look more like the video game.I used the same will figure with the toybiz Sting head on Billy Lee's body and hot glue...2 comments |
![[Double Dragon Will & Green Abobo] Here is two Double Dragon people from the NES game. The first is Will and he was made out of a Billy Lee body with a toybiz sting head.#two is Green Abobo and he is made out of a Hasbro movie Hulk figure with toybiz The Thing(ben grim)head from the movie.
They are ready to kick the Lee's back to the 80s. thank's and enjoy.](userimages/customs/20000/19558-1.jpg) Double Dragon Will & Green Abobo Nintendoby inuyasha82Here is two Double Dragon people from the NES game. The first is Will and he was made out of a Billy Lee body with a toybiz sting head.#two is Green A...1 comments | ![[Captain N] This is an idea me and my brother came up with. We thought it would be cool to see Captain N all grown up and hardened by his time in videogame land.
Recipe:
head and upper body 25th Hawk
legs 25th Shipwreck
Zapper is a modified pistol
Wii-saber, Superscope, and controller were all scratch built (1st time for me)
Thanks for looking and comments good or bad welcome.](userimages/customs/18500/18348-1.jpg) Captain N Nintendoby frankbooth23This is an idea me and my brother came up with. We thought it would be cool to see Captain N all grown up and hardened by his time in videogame land.
...9 comments |
![[Little Mac (Punch-out!!)] It's Little Mac from Nintendo's Punch-Out!!, originally debuting on the NES, and recently remade on the Wii!
I used various Marvel Legends figures for parts as well as sculpting. The boxing gloves, the shorts, and boots' details, parts of the hair were all sculpted on. The face was also smoothed out with sculpt.](userimages/customs/18000/17728-1.jpg) Little Mac (Punch-out!!) Nintendoby RandomCreationsIt's Little Mac from Nintendo's Punch-Out!!, originally debuting on the NES, and recently remade on the Wii!
I used various Marvel Legends figures fo...2 comments | ![[Symbiote Pikachu] This is my first custom and all I did was take a 2 inch pikachu and painted poorly to look like venom](userimages/customs/17500/17019-1.jpg) Symbiote Pikachu Nintendoby DiceManThis is my first custom and all I did was take a 2 inch pikachu and painted poorly to look like venom...5 comments |
|