![[Batman | Dark Knight Rises • Cloth Cape] Just another revisit to cloth cape making. This cape is a lot longer and fuller and really sits well on Bàtman. I have continued to evolve my methods in cape wrangling and finally did a tutorial on this figure in theGeekSummit blog. It's another pull-through cape sealed into the body and then shaped with hot glue under the neck of the cape.
The neck has been altered for added movement ( for batpods n such). The back, knees and elbows have been deepened as well for a lower crouching position. To finish off I sprayed him down with matte finish.](userimages/customs/48000/47509-1.jpg) Batman | Dark Knight Rises • Cloth Cape Movie Mastersby GeekSummitJust another revisit to cloth cape making. This cape is a lot longer and fuller and really sits well on Bàtman. I have continued to evolve my m...6 comments | ![[Batman | Michael Keaton '89 Movie Masters VI] This is version 6 done back to back with version 5. I wanted to do a little more work towards preserving the articulation of the abdomen since it is the only joint that allows for the "BatLean". Once again we used the aluminum tubing to post up the Glider form of the cape. Also the shinguards have been given a little more attention to detail. I haven't quite topped myself yet so definitely plan to see more of these somewhere in the future.](userimages/customs/47500/47267-1.jpg) Batman | Michael Keaton '89 Movie Masters VI Movie Mastersby GeekSummitThis is version 6 done back to back with version 5. I wanted to do a little more work towards preserving the articulation of the abdomen since it is t...3 comments |
![[Batman | Michael Keaton '89 Movie Masters V] This is Version 5 of the Keaton bats. I had made quite a few headcasts back this summer and was holding on to these last couple to get back to but decided to move ahead on them.
This version features all the same additions of torso armor, gauntlets and shin guards sculpted in Apoxie Sculpt. The Cape is sandwiched between the cowl and upper torso. The cape now for the first permanent time is set up with rigging that goes into his hands to support the cape as glider wings. the handles are from FliX TriX bicycle handle bars. the actual bars are a tiny aluminum tube with floral wire fed into it to keep it from breaking when bent.
He is displayed on a custom diorama I had done as part of a commission that went south.
If you ever hear from KingofCustoms31… get money up front… he's a deadbeat.](userimages/customs/47500/47266-1.jpg) Batman | Michael Keaton '89 Movie Masters V Movie Mastersby GeekSummitThis is Version 5 of the Keaton bats. I had made quite a few headcasts back this summer and was holding on to these last couple to get back to but dec...2 comments | ![[Nolanverse Robin] second in my project of 2.
john blake as robin.
protoype bruce wayne body, John blake head and complete paint.
Hope you like it.](userimages/customs/47500/47257-1.jpg) Nolanverse Robin Movie Mastersby shadow-elsecond in my project of 2.
john blake as robin.
protoype bruce wayne body, John blake head and complete paint.
Hope you like it....2 comments |
![[Nolanverse Batman beyond] this was one of two projects just to see what i could make them look like.
This is just a repaint of a Movie Masters Batman. I think he turned out ok, let me know](userimages/customs/47500/47232-1.jpg) Nolanverse Batman beyond Movie Mastersby shadow-elthis was one of two projects just to see what i could make them look like.
This is just a repaint of a Movie Masters Batman. I think he turned out ok...3 comments | ![[Bane(Tdkr)] Like most of you, I was a bit disappointed with the tdkr Bane. I decided to make a bigger better version of him. I had an extra wwe figure lying around so I figured I could make him. For me this figure was really hard for you this might have been the easiest thing ever. I used the Bane head and jacket. I sculpted the belt, pockets, knee pads, and arm bands. Painted pants and there we go! Btw the last 2 pics are of my next custom.](userimages/customs/47000/46911-1.jpg) Bane(Tdkr) Movie Mastersby Jmanjot CustomsLike most of you, I was a bit disappointed with the tdkr Bane. I decided to make a bigger better version of him. I had an extra wwe figure lying aroun...7 comments |
![[Jason Todd as Batman] Who doesn't love the DC Direct Batman Reborn Jason Todd as Batman? I have seen a lot of different renditions of Batman using the Movie Masters Dark Knight Rises Batman, but I don't think I have seen a "Gatman" version as of yet. Just a Dark Knight Rises Batman with sculpting and custom Paint job. Hope you guys like it.](userimages/customs/47000/46849-1.jpg) Jason Todd as Batman Movie Mastersby RG3 CustomsWho doesn't love the DC Direct Batman Reborn Jason Todd as Batman? I have seen a lot of different renditions of Batman using the Movie Masters Dark Kn...9 comments | ![[Judge Dredd - DREDD] Head - Karl Urban McCoy Star Trek 6"
Arms/Torso - Movie Masters TDK Batman
Legs - Movie Masters Avatar Miles Quaritch
The Helmet, armor, shoulder pads and everything else were sculpted or modded fodder.
I saw Dredd in the cinema and waited until the DVD release to see if any merchandise would come out. I could see NECA doing something down the line.
Once I got the Bluray I decided to have a go myself. This is probably my most extensive custom so far, well apart from my Fallout stuff and Rookie Anderson, which I'll post later.
If you haven't already watch Dredd, it's mint.](userimages/customs/47000/46628-1.jpg) Judge Dredd - DREDD Movie Mastersby DaxceonHead - Karl Urban McCoy Star Trek 6"
Arms/Torso - Movie Masters TDK Batman
Legs - Movie Masters Avatar Miles Quaritch
The Helmet, armor, should...6 comments |
![[Bane] WWE Elite Batista torso on a bushwacker lower. WWE Elite Eziekel Jackson arms with MM Bane head and cape. Sculpted the glove.](userimages/customs/47000/46594-1.jpg) Bane Movie Mastersby JDMeg6314WWE Elite Batista torso on a bushwacker lower. WWE Elite Eziekel Jackson arms with MM Bane head and cape. Sculpted the glove....2 comments | ![[Scarecrow ( Batman Begins)] Been a while. Working on 2 customs at once (and having an idea for a new one) I was waiting on something to arrive and had spare time on my hands. I had a MM Jim Gordon lying around with a messed up face and thought of how cool the suit looked. It reminded me of scarecrow. Since the face was messed up I decided to cover it and make scarecrow. I sculpted mask from scratch and that is it. It turned out cool but could be better. Let me know what you think!](userimages/customs/46500/46489-1.jpg) Scarecrow ( Batman Begins) Movie Mastersby Jmanjot CustomsBeen a while. Working on 2 customs at once (and having an idea for a new one) I was waiting on something to arrive and had spare time on my hands. I h...11 comments |
![[Movie Masters Lucius Fox] I was supposed to do the cast of the TDK trilogy in Neca/McFarlane style but due to the very limited time I have to do customs, I had to settle on making only Bats, Joker, Two-Face, Scarecrow, Ra's Al Ghul, Catwoman in the future. Still, there's the desire to have the (almost) complete cast of the greatest comic book movies displayed on my shelf, so I opted to settle on the Movie Masters line, deciding that the TDKR waves are passable. With that, I have to own a Lucius Fox figure.
This one is fairly easy, shaved off the mask of Scarecrow figure, sculpted the head, removed the neck tie, replaced it with a bow tie, then repainted the figure. Haven't had the time to cleanup the figure so there are a few white smudges on his coat. Hope you like it!](userimages/customs/46500/46414-1.jpg) Movie Masters Lucius Fox Movie Mastersby sinag55I was supposed to do the cast of the TDK trilogy in Neca/McFarlane style but due to the very limited time I have to do customs, I had to settle on mak...7 comments | ![[Unmasked Batman] Real easy custom. Gave movie masters Batman the prototype Bruce Wayne head and used another Batman head and painted completely black so it looks empty. As always comments appreciated.](userimages/customs/45500/45272-1.jpg) Unmasked Batman Movie Mastersby Jmanjot CustomsReal easy custom. Gave movie masters Batman the prototype Bruce Wayne head and used another Batman head and painted completely black so it looks empty...2 comments |
![[Batman Begins - Batman('Cloth' Caped Crusader)] Hello, I am Spartacus.
Today I bring you my own Cloth caped Batman figure.
Batman is my favorite DC Comics character and Ive ALWAYS loved the idea of having cloth capes for batman figures. Ive seen numerous ones here and thought I should do the same and try my hand at making cloth capes for all my batman figures.
I went ahead and started with the Movie Masters Batman from Batman Begins. I had an old black 2 piece suede suit around that was too small for me so I figure Id use that kind of cloth to make the capes from.
I wasn't the greatest at cutting the bat wing cape but, I tried. Afterwards i simply glued it on in the right areas and just like that, I had a cape cloth for the MM Batman Begins figure. I tried to make it wide enough to cover the entire figure like Batman has his cape doing which makes him look that much more cool!
Im trying to make cape cloths for ALL my batman figures now and perhaps one day, I will share them with you as I improve overtime.](userimages/customs/45500/45056-1.jpg) Batman Begins - Batman('Cloth' Caped Crusader) Movie Mastersby SpartacusHello, I am Spartacus.
Today I bring you my own Cloth caped Batman figure.
Batman is my favorite DC Comics character and Ive ALWAYS loved the idea o...4 comments | ![[Knight Shadow Batman] Hey guys. I am new to the community and wanted to start posting some of my current and past work.
I had an extra batman figure from the Movie Masters Dark Knight Rises line and decided to add the Knight Shadow Batman head and do a repaint. I love the original Knight Shadow batman and wanted to see what he would look like with a new feel. Thanks for checking him out.](userimages/customs/45000/44939-1.jpg) Knight Shadow Batman Movie Mastersby RG3 CustomsHey guys. I am new to the community and wanted to start posting some of my current and past work.
I had an extra batman figure from the Movie Masters...16 comments |
![[Bane | Dark Knight Rises • Final Conflict] Basically I just took the standard DKR Bane and had started to just replace the arms with WWE arms as I had done before but this time I wanted to take the other turn and go for the look from the final conflict on the courthouse steps. The arms are held in place using thumbtack (plastic removed). The pegs are small glue stick cut into cylinders taking the place of the peg and then the thumbtack holds everything together.](userimages/customs/45000/44516-1.jpg) Bane | Dark Knight Rises • Final Conflict Movie Mastersby GeekSummitBasically I just took the standard DKR Bane and had started to just replace the arms with WWE arms as I had done before but this time I wanted to take...2 comments | ![[Jim Gordon | Dark Knight SWAT Gear] So I've been wanting to do this figure for a minute and as more John Blakes made their way to market I figured I'd jump on it before they all petered out. This is a John Balke Body with Jim Gordon head. The glasses were not glued in so I took them off and shaved the lenses to have that suspended glass we see in his SWAT gear getup. I could have trimmed more but I didn't want to make them too fragile. iPhone(4) doesn't take finer Macro shots so well but I did try to get a shot of the glasses themselves.
Thanks for looking!!](userimages/customs/44500/44265-1.jpg) Jim Gordon | Dark Knight SWAT Gear Movie Mastersby GeekSummitSo I've been wanting to do this figure for a minute and as more John Blakes made their way to market I figured I'd jump on it before they all petered ...6 comments |
![[Lucius Fox] I was upset that it looks like Mattel won't give us a MM Lucius Fox figure, at least not anytime soon, so I decided I would make my own. I took a Spider-man movie Jameson (same base I used for Hugo Strange but not the same figure)and did some very light sculpting, repaint and I had a MM scale Mr. Fox. I'll probably do a second coat at some point. I know it's not perfect, but it works for me and I can display him with my collection proudly. Sound off below with your thoughts.](userimages/customs/44000/43970-1.jpg) Lucius Fox Movie Mastersby mordachiI was upset that it looks like Mattel won't give us a MM Lucius Fox figure, at least not anytime soon, so I decided I would make my own. I took a Spid...6 comments | ![[Superman (Henry Cavill 2.0)] After two months of work, Henry Cavill 2.0 is completed. Used a ML Constrictor as a base so the joints have absolutely NO rub as they are the exact same color as the paints I used for the suit! I basically sculpted the entire surface of the suit and textured it with my ball stylus. Everything has texture, even the gold parts of the belt and even the belt buckle itself.
The head was a third attempt to sculpt one from scratch. Cavill has a difficult likeness to capture, but this is pretty close in my opinion. The photos' filter is made to look like the footage from Comic Con. With no touch ups, the suit color is navy, the reds are normal bright, and the "yellow" parts are gold.
On the cape, I went with a cloth one but sculpted the area where the cape attaches to the shoulders. It's something I've seen GeekSummit do with good results and to be more accurate.
He's completely articulated and the sculpt was done in a way that doesn't restrict movement at all. He has roughly 31 P](userimages/customs/44000/43878-1.jpg) Superman (Henry Cavill 2.0) Movie Mastersby matthancockAfter two months of work, Henry Cavill 2.0 is completed. Used a ML Constrictor as a base so the joints have absolutely NO rub as they are the exact sa...10 comments |
![[Movie Concept Armored Deadpool (Cyber DP)] Okay guys this thing started out as a Movie Masters Batman that I cut at the shins and extended for height. The head has been completely hand sculpted from Apoxy Putty, the design I made on the fly as I sculpted it. Even though he's basically wearing a helmet in this design I decided to included the hood part in the back... just cause it looks cool! The bike came from a Power Rangers Wolf Ranger set that I sculpted the top on and repainted. The bandolier came from a mix of Duke Nukem and an ML SHIELD agent. They can be taken on and off at will. He retains all of his articulation and has been painted using a metallic red.](userimages/customs/44000/43770-1.jpg) Movie Concept Armored Deadpool (Cyber DP) Movie Mastersby JinzinOkay guys this thing started out as a Movie Masters Batman that I cut at the shins and extended for height. The head has been completely hand sculpted...7 comments | ![[Jessica Rabbit Bratz] Can't believe I never posted this, it's an old one!
I repainted her face and glued her hair in place then added gold earrings. The dress is painted on the top then a red velvet fabric added on the bottom. I then added maroon glitter glue to her entire dress for that sparkle, then painted the gloves purple, and her heels pink. The gift box was a prop from a bratz that i used to store her removable purple boa, then made a small tag that reads "To Jessica From Roger."](userimages/customs/44000/43767-1.jpg) Jessica Rabbit Bratz Movie Mastersby RogueCan't believe I never posted this, it's an old one!
I repainted her face and glued her hair in place then added gold earrings. The dress is painted o...24 comments |
![[Batman (Comic Colors: Armorized) TDK Returns Nolan] This figure is virtually just a repaint of the existing figure. I originally painted him a flat gray but the gray looked to dull on the details of the costume, after putting silver over the armored parts/plates of the figure he came out looking much better/realistic to how his comic colors might be portrayed in a movie. The cape came off a DCUC Batman replacing the one he originally had and a batarang was added for effect.](userimages/customs/44000/43703-1.jpg) Batman (Comic Colors: Armorized) TDK Returns Nolan Movie Mastersby JinzinThis figure is virtually just a repaint of the existing figure. I originally painted him a flat gray but the gray looked to dull on the details of the...11 comments | ![[Nightwing Nolanverse TDKR Concept Figure] This figure was a pretty simple recipe and stolen frankly from other customizers (though I don't know who they have been off the top of my head) He's just a repainted TDK Movie Masters Batman figure with a head swap with the John Blake policeman figure. I decided to add in some sculpting elements removing the bat gauntlets and replacing them with arm guards instead. The hair was sculpted in a more realistic fashion after Nightwing's DCUC figure, the mask is a mixer of the DCUC Nightwing's design with Robin's mask design from Batman Forever, so it's not just painted on. Straps have been glued over his shoulders and back to house the baton/prods strapped to him which came from ninja weapons I cut and sanded down to look more like batons. The chest design was sculpted by me and my own creation. The bo-staff came from a Deathstroke figure but looked fitting on Nightwing here.](userimages/customs/44000/43702-1.jpg) Nightwing Nolanverse TDKR Concept Figure Movie Mastersby JinzinThis figure was a pretty simple recipe and stolen frankly from other customizers (though I don't know who they have been off the top of my head) He's ...21 comments |
![[Marty Mcfly] Doesn't get more 80's than Mr.McFly here! He drives a Delorean, tries to emulate 1 of the best 80's guitarists(Ed Van Halen) & boasts skinny jeans, denim jacket a walkman digital watch & a Huey lewis sountrack...80's all the way!
i love LOVE! BTTF!
Marty was made from a movie daredevil torso eric bicshoff legs, a dollar store head(vastly reworked) and sculpt for the vest. Guitar is from The Crow, camera from a wrestler, shades from Sgt.Slaughter(also 80's!) ;)](userimages/customs/44000/43588-1.jpg) Marty Mcfly Movie Mastersby RedmistDoesn't get more 80's than Mr.McFly here! He drives a Delorean, tries to emulate 1 of the best 80's guitarists(Ed Van Halen) & boasts skinny jeans...12 comments | ![[Walter White/ Heisengberg] Walter White movie master figure, has dark glasses and hat to become the famous Heisengberg](userimages/customs/43500/43343-1.jpg) Walter White/ Heisengberg |
![[Jensen Ackles as the Red Hood] Hello guys Ten here with my Jensen Ackles as the red hood.After the batman under the red hood movie came out I always wanted to see Jensen play the red hood because of his sinister voice and he is a great actor.So this is what I imagine him to look like in a live action form.
Recipe: base Bruce Wayne in survival suit
jacket: Rick Grimes
head:Kratos dremeld and sculpted
knife:halo reach figure
gun:the shadow](userimages/customs/43500/43272-1.jpg) Jensen Ackles as the Red Hood | ![['Robin' John Blake - Nightwing] So, it appears that John Blake as Nightwing/Robin customs are in vogue in these days following the release of 'The Dark Knight Rises', and leading up to its release on home video formats. I rushed out a custom of what John Blake might look like had he taken on the mantle of Robin, Nightwing, or in my conceptualization, a combination of the two personas, and there have been many, many really great customs that have well and truly knocked mine out of the water. This is my new take - the base body is a Prototype Suit Bruce Wayne with the straps, belts and bandoliers removed with the Nightwing insignia sculpted, the head is from a Movie Masters John Blake and the mask is made from soft card and twisty wire. The new features with this one are the muted navy blue colour scheme for the body, with a muted red for highlights. I wanted to combine the red colour scheme of the Robins and Renegade/New 52 Nightwing with Nightwing's traditionally blue colour scheme, and realised that this was also th](userimages/customs/43000/42892-1.jpg) 'Robin' John Blake - Nightwing Movie Mastersby JeddTheJediSo, it appears that John Blake as Nightwing/Robin customs are in vogue in these days following the release of 'The Dark Knight Rises', and leading up ...14 comments |
![[Bane - Sewer Fight Custom] I exchanged the arms from a shirtless movie masters two-pack Bane with a standard one to create his look from the sewer fight with Batman.](userimages/customs/43000/42771-1.jpg) Bane - Sewer Fight Custom Movie Mastersby ShaneHelmsI exchanged the arms from a shirtless movie masters two-pack Bane with a standard one to create his look from the sewer fight with Batman....9 comments | ![[Robin John Blake: the Boy Wonder] Holy Hockey Pucks Batman, Im in my very own Movie!
This is Robin if Chris Nolan started a new trilogy based on Blake becoming Robin. This figure has a sulpted chest armor and hair! He has been repainted to give him the classic green and red and gold instead of yellow. He has a grappling gun, sword, and wooden staff and a wrist blade. He also has net like wings that stabilize flight. This idea of Blake is about blake in a dark and dirty world fighting new villians like " Jonah Hill as the Penguin " or " Eddie Murphey as The Riddler ", however, blake is still a Kid at heart and likes to have fun and mess with the villians!
Thank you for looking and Im almost to my 50th Custom!](userimages/customs/43000/42576-1.jpg) Robin John Blake: the Boy Wonder |
![[Batman (Movie Masters Repaint)] What up Realmer's, Today I'm posting a filler custom while I wait for other projects paint/sculpting to dry,
I made this Batman in about 2.5 hours this morning and I'm happy with how it turned out,
Let me know what you think ?](userimages/customs/42500/42412-1.jpg) Batman (Movie Masters Repaint) Movie Mastersby 3bcustomsWhat up Realmer's, Today I'm posting a filler custom while I wait for other projects paint/sculpting to dry,
I made this Batman in about 2.5 hours thi...25 comments | ![[Batman Movie Masters] Here is my 2nd attempt at a Movie Master style Batman, this version is DCU meets DCD Arkham City meets Movie Master. He was made out of a Movie Master Batman torso, DCU Batman legs and cape and a DCD Arkham city batman head. As you can see I have been on a Batman and DC kick lately! Hope you like him.
Steve](userimages/customs/42500/42268-1.jpg) Batman Movie Masters Movie Mastersby StevidHere is my 2nd attempt at a Movie Master style Batman, this version is DCU meets DCD Arkham City meets Movie Master. He was made out of a Movie Master...13 comments |
|