![[Arkham City Batman] Hey
So think we can all agree mattel does a great job of not detailing their figures so I went ahead and gave Bats a black wash then dry brushed gun metal to give him an armoured look and flesh tones on the face. Also gave him a leather cape and re placed the head so it sits a lil higher now Bats has a neck
hope you like
cheers](userimages/customs/44000/43991-1.jpg) Arkham City Batman Batman: Arkham Cityby nuffsaidHey
So think we can all agree mattel does a great job of not detailing their figures so I went ahead and gave Bats a black wash then dry brushed gun ...5 comments | ![[Batman Arkham City] I've never really liked Mattel's Arkham City Batman: the head sat oddly on the neck, the hands stuck out so he looked like a waddling penguin, the cape was cumbersome and flayed out behind him in a rather unnatural-looking manner, and he looked kinda stocky overall. Several customizers here on the realm have done some really nice reworkings of the figure, especially in terms of repainting. I found an all-black variant of the figure loose at a convention, I don't know if this is an official repaint that was unreleased or just a mostly-unpainted prototype, but either way it seemed ripe for a bit of a conversion. I tried sanding down the insides of his arms and the area where the arms meet the torso so Batman could bring his arms in closer, but I ended up creating large holes in the torso (it was my first day with a real dremel) and it doesn't seem to make too much of a difference. I trimmed off the sides of his cape (I know it would've been ideal to use a cloth cape instead, but this wil](userimages/customs/44000/43511-1.jpg) Batman Arkham City |
![[Jason Todd Red Hood Arkham City Style] Jason Todd hasn't been shown in the games, but the Joker drops clues that he existed and was killed.
For this custom, I decided to take the comic design and push it to an extreme like the other game models. The design principle was that he recycled parts of his old Robin costume(same one Tim is wearing) to create the new gear. It has an armored jacket, and Robin's boots and bracers. The chest has a spray-painted 'bleeding' bat logo, etc. Most of the parts are pretty basic fodder...
Head, feet, belt, bracers: DC Direct AC Robin
Jacket: Mattel Avatar guy
Legs: Mattel Captain Cold
Hands: Mattel Jonah Hex
Guns and belts: DC Direct Comedian
Torso: mattel Batman Begins Vigilante Bruce Wayne
Enjoy!](userimages/customs/43500/43339-1.jpg) Jason Todd Red Hood Arkham City Style | ![[AC Harley Quinn 12" Bratz] This figure turned out to be a hard one to make. She is a 12" Bratz that actually talks and is interactive but sadly I don't know how to program her to talk like Harley would. :-/
So basically painted her face restyled the hair then colored it. The clothes are hand sewn and painted with detail added. The tattoos were printed out and put on her arm and torso, with a real chain, choker, and belt added. I then saw a custom with a stuffed Mr. J and decided to do my own version for her to hold along side teh automatic gun. ;-) It was sewn and then colored with markers and glued on some green fuzz for his hair and added real small black button eyes.](userimages/customs/43500/43118-1.jpg) AC Harley Quinn 12" Bratz Batman: Arkham Cityby RogueThis figure turned out to be a hard one to make. She is a 12" Bratz that actually talks and is interactive but sadly I don't know how to program ...22 comments |
![[Abramovici Twins - Sickle] I have been wanting to make the “Twins” ever since I first played the game. Finally got around to it.
The Base is a Marvel Select Hulk with one arm cut off. Modified the head by cutting off the Hulk hair, then I gave him a little facelift with the Dremmel on the cheekbones & chin, to make him look more Russian and less Hulk.
Lots of super-sculpty on the pants.
The Tattoos were hand drawn, scanned, then printed on decal paper.
Made the sickle from scratch.
If you would like to see more please check with me](userimages/customs/42500/42331-1.jpg) Abramovici Twins - Sickle | ![[Abramovici Twins - Mr Hammer] I have been wanting to make the “Twins” ever since I first played the game. Finally got around to it.
The Base is a Marvel Select Hulk with one arm cut off. Modified the head by cutting off the Hulk hair, then I gave him a little facelift with the Dremmel on the cheekbones & chin, to make him look more Russian and less Hulk. Added the green hair bit by bit in layers.
Lots of super-sculpty on the pants. Plus a touch with a piece if burlap cloth for texture.
The Tattoos were hand drawn, scanned, then printed on decal paper.
Made the hammer from scratch.
If you would like to see more please get with me](userimages/customs/42500/42329-1.jpg) Abramovici Twins - Mr Hammer |
![[Arkham Asylum Armored Batman 1:12th Scale] DC UNIVERSE style custom ARKHAM ASYLUM ARMORED BATMAN. Approximately 6.5 inches tall
Pulled him apart using standard heating tech. Shaved joints for minimal paint rub. Primed, painted, colorwashed, sealed and put back together. Absolutely love the larger 10 inch version but it is out of scale with other arkham city figures so we prepared this one to be in scale with 6 to 6.5 inch figures.](userimages/customs/42500/42208-1.jpg) Arkham Asylum Armored Batman 1:12th Scale | ![[Batman Arkham Asylum Battle Damaged Custom Figure] I love Battle damaged stuff! I basically beat up this "B-man" by giving him a bloody chin, cuts, tears, dirt, a bent ear and bruises on his body!
Please enjoy the pictures and thanks for looking!](userimages/customs/42500/42081-1.jpg) Batman Arkham Asylum Battle Damaged Custom Figure |
![[Batman (Arkham City)] my previouse arkham city batman was not too good . but i was hoping this makes up for them . heres the recipe
head is a batman tdkr with some sculpt
bat ears ar sculpted
neck piece is also sculpted
torso,arms,upper legs are a marvel universe daredevil
gauntlets are sculpted
lower legs are duke accelerator suit roc with some sculpt
belt is tdkr
wired cape old jacket
bat symbol sculpted
hope you guys like him and plz comment and plz give any tips on how i can improve my custom PEACE OUT !!!!!!!!!!!!!!](userimages/customs/42000/41686-1.jpg) Batman (Arkham City) | ![[Arkham City Nightwing] Here is another one of my latest customs, Nightwing. I thought the Arkham City head was probably one of the worst headsculpts DC Universe had put out. However, the body sculpt on this guy is probably one of the best in the DCU line. I replaced the head with the DCC Hush Nightwing head, and gave him a new paint job. Pretty cut and dry custom, but I think the results speak for themselves. Thanks!](userimages/customs/42000/41627-1.jpg) Arkham City Nightwing |
![[Batman Arkham City] Hey guys, it's been a long time! I have a lot of stuff coming down the pipeline for you guys and I'll just say it's been a busy summer! Here is one of my more recent customs, Arkham City Batman. He was shortened at the waist, given articulated hands, real cloth cape, altered shoulders so they could come closer to his torso and realistic hand painted feel. A lot happier with how he came out than the drab, plain jane figure mattel released. Again I apologize for the long hiatius, my four month old and 7 year old have been keeping me busy! Thanks and hope you guys like him!](userimages/customs/42000/41624-1.jpg) Batman Arkham City | ![[Wayne Ent. Transbat Prototype] Hey realmers, here's my new creation: the transbat!
The transbat is a wheeled and winged anti riot transformable vehicle equipped with non-lethal cannons.
Had this 1985 Big Jim Vehicle and thought it would perfectly fit with my Play arts kai armored batman (Nice figure but fragile joints).
Washed the vehicle, took off BJ stickers and front guns, sanded it, designed the cockpit with 1985 tmnt accessories,used black spray paint then dry brushed the entire thing with white skull citadel paint and silver posca.
Enjoy!](userimages/customs/41500/41490-1.jpg) Wayne Ent. Transbat Prototype |
![[Robin (Arkham City)] well i had the dc direct robin but he had no articulation but i also had the batman legacy robin...here is the problem BML robin had no hands to hold his fighting pole....and the dc direct robin had the perfect hand but wouldnt fin in the wrist of the DML robin so i grabbed my robin from the dcuc got his foreams and hands glued and swapped his head and now i have the best robin( to me at least) in my collection now :)](userimages/customs/41500/41355-1.jpg) Robin (Arkham City) | ![[Scarecrow] Head: Modified Snake Eyes
Rest of body/cloak: POC Zartan](userimages/customs/41500/41182-1.jpg) Scarecrow |
![[Talia Al Ghul] Head: Modified Invisible Woman Marvel Universe
Torso: Modified Socos torso
Arms: ROC Baroness
Upper Legs: ROC Baroness
Lower Legs: ROC Agent Helix](userimages/customs/41500/41181-1.jpg) Talia Al Ghul | ![[The Joker Arkham Asylum] I saw that bbk release a figure called a clown it was basically the joker from arkham asylum
The only problem was he was purple a little thin with black hands
So that was it paintbrush out a bit of resin so totally repainted and reshaped him made a titan gun ,
new flower and a custom stand - JOB DONE i think he looks a lot better](userimages/customs/41500/41125-1.jpg) The Joker Arkham Asylum |
![[Arkham City Mr. Hammer and Mr. Sickle] Both figures are made from random Wrestlers. Mr. Hammer's right arm was switched with Mr. Sickles, and his left arm was cut off. I painted his face, permanent marker for the smile on his right arm, and for his pants. His hammer is from a Halo Tartarus figure. Mr.Sickle's head is shaved down (had to take the hair off.) and the tatoos on his torso and his pants were made with permanent marker. His sickle was made from the Reaper from Family guy.](userimages/customs/41000/40746-1.jpg) Arkham City Mr. Hammer and Mr. Sickle | ![[Bane Arkham City Prototype] BANE ARKHAM CITY
Incredible action figure Bane of Arkham City, created from pieces of Marvel Legends, Ultima Online, etc., With incredible unique details and designed based on the original version of the video game.](userimages/customs/41000/40576-1.jpg) Bane Arkham City Prototype Batman: Arkham Cityby chief34BANE ARKHAM CITY
Incredible action figure Bane of Arkham City, created from pieces of Marvel Legends, Ultima Online, etc., With incredible unique det...2 comments |
![[Arkham City Riddler with Glasses] I was one of many who were a little miffed that DC Collectibles didn't give Riddler a pair of glasses even though he wears glasses in the game. So, I made my own pair. The lenses are cut from plastic blister packaging and painted with a purple wash, and the arms of the glasses are cut from black twisty ties. It doesn't look factory-made, but it will do.](userimages/customs/40500/40364-1.jpg) Arkham City Riddler with Glasses | ![[Bane Arkham Max] a big time bane, is the fourth bane i made, i like what i do for living. some of this are hard, but some are very fun, this have plastic hoses, and a red ligth in the arm buton that actualy works](userimages/customs/40500/40159-1.jpg) Bane Arkham Max |
![[Robin] This was meant for his staff, not the figure himself. his old staff was plain, so i made one out of chis-kabob stick.](userimages/customs/40000/39921-1.jpg) Robin | ![[Arkham City Catwoman] i started with black widoe so first i ripped the hair off nd sculpted the msk then i pinted and glossed](userimages/customs/40000/39752-1.jpg) Arkham City Catwoman |
![[Harey Quinns Revenge Harley Quinn] i posted this beaty b4 but i got complaints about not seeing the face cuz of the vail and being accused of using photo shop so i repainted harley and ripped her vail off and took the photos with backrounds i made from constrution paper](userimages/customs/40000/39751-1.jpg) Harey Quinns Revenge Harley Quinn Batman: Arkham Cityby dcauguyi posted this beaty b4 but i got complaints about not seeing the face cuz of the vail and being accused of using photo shop so i repainted harley and ...4 comments | ![[Harley Quinns Revenge Harley Quinn] i started with arkahm city harley and repainted all the outfit black then i added the red to the shoes and repainted the belt then i painted her hair black and left the pink on her ponytail because she has one ponytaill dyed in the dlc i left all the skin how it was cuz it was at its best then i glossed her to make it look leatherish and she was done](userimages/customs/40000/39678-1.jpg) Harley Quinns Revenge Harley Quinn Batman: Arkham Cityby dcauguyi started with arkahm city harley and repainted all the outfit black then i added the red to the shoes and repainted the belt then i painted her hair ...8 comments |
![[Batman Arkham City] i thought it would b awesome to hav a batman arkham figure so i took a wolverine who had the same costume outline and everything on it reminded me of batman arkham city so i got to work i hope u like this custom plz give me any tips on how i can improve
Recipe :
head the gaurdian marvel universe
body marvel universe wolverine
gauntlets on forearms and shins sculpted
ears sculpted
belt gi joe
cape old t shirt
i hope u like PEACE OUT!!!!!!!!!](userimages/customs/39000/38887-1.jpg) Batman Arkham City | ![[Arkham City Robin] A relatively simple custom - putting hair on Robin's head. Robin's head was attached to the inside of his hood, and after I ripped the hood off I saw he was bald - like a masked Lex Luthor. So I sculpted some hair and painted it over.
Updated with darker coloured hair.](userimages/customs/38500/38220-1.jpg) Arkham City Robin |
![[Catwoman (Animated Style)] Selina Kyle comes in many shapes, sizes and styles, one of the most iconic ones was her Animated series one.
With the awesome Arkham city figures currently out there, I made a mix of styles to reminisce her iconic animated costume. I know she has an alternate animated one in the game, but it was fun to re-design it matching it with the Arkahm city one.
Catwoman is fully articulable, since the base used was the white variant from the 2 pack. The belt was hand sculpted and also includes an extra SELINA KYLE swappable head!
The bat is in real trouble now!](userimages/customs/38500/38170-1.jpg) Catwoman (Animated Style) | ![[Eric] i was looking at some arkahm city photos and i noticed a joker thug with the same hair as the miz so i got to work i painted the face first then i worked on the shorts with apoxie and made them into pants which took a little while and then i got Eric a mixed martial arist and a parkourist who was interested in the masked vigilante known as Batman and a person framed for murder of his own best friend ryan then he had gotten locked in arkham, a year later alot of inmates were sent in the new prison in gotham city known as arkham city and he also found out that the person who really killed ryan was in arkham city and got a new lead that he was in the jokers gang but a name has not been mentioned so as he got excepted in thhe jokers gang and he made a friend in the group spike a week later eric was on a rooftop him and spike they were having a conversation about the joker then spike had stopped talking suddenly a punch lands on eric and he recovers it was a mix of punches and kicks it wa](userimages/customs/38500/38166-1.jpg) Eric |
![[Arkham City Batman] Nothing new here, just a bunch of slight modifications to improve this figure. I'd like to thank my fellow Realmers who inspired me to do this; fitzjedi, TheGr8One, future_trunks, The Balzan and anyone else who has done this before. I thinned down his horns with a file. I re-sculpted the cowl, shortening the neck in the process, and used a piece of armature wire as a neck joint. Used a dremel to remove plastic from his armpits so he could lower his arms to a more natural position. The bat symbol is cut from construction paper and glued on. Painted the blue parts to black. Added some shading to the figure and a wired cloth cape. Thanks for looking.](userimages/customs/38500/38148-1.jpg) Arkham City Batman Batman: Arkham Cityby bet1Nothing new here, just a bunch of slight modifications to improve this figure. I'd like to thank my fellow Realmers who inspired me to do this; fitzje...25 comments | ![[Arkham City Joker Goons] Used a mix of Doom and WWE Figures Apoxie Sclupt for the Details. Joker is WIP, Still have to add the untied tie, pinstripes and paint the details in the face.](userimages/customs/38000/37962-1.jpg) Arkham City Joker Goons Batman: Arkham Cityby Magnum PIUsed a mix of Doom and WWE Figures Apoxie Sclupt for the Details. Joker is WIP, Still have to add the untied tie, pinstripes and paint the details in ...11 comments |
|