![[Shootingstar] In addiction of the Texas Twister that I posted yesterday,I did this one too.](userimages/customs/49000/48716-1.jpg) Shootingstar | ![[Texas Twister] If there`s sometinhg that I must thank to my friend Wilkison is that he make me like a lot of these curious vintage style heroes from Marvel. This Texas guy is one of them, certainly](userimages/customs/49000/48687-1.jpg) Texas Twister Marvelby MentorbreakIf there`s sometinhg that I must thank to my friend Wilkison is that he make me like a lot of these curious vintage style heroes from Marvel. This Tex...6 comments |
![[Yellow Jacket] Another Day, another custom. My friend Wilkison strikes again He requested me a lot of customs. This is just on of the nine ones. Below you guys can see a representation of the main process of this one.](userimages/customs/49000/48686-1.jpg) Yellow Jacket Marvelby MentorbreakAnother Day, another custom. My friend Wilkison strikes again He requested me a lot of customs. This is just on of the nine ones. Below you guys can s...2 comments | ![[Miss Marvel] After watching the animated series The Avengers, Earth´s Mightiest Heroes!
I liked the character of Miss Marvel.
The figure base is Mary Batson DCUC.
Only head, Star Sapphire
Mask, scarf (neck),shoulders, chest, gloves and boots modeled with epoxy.](userimages/customs/49000/48640-1.jpg) Miss Marvel Marvelby AndroideAfter watching the animated series The Avengers, Earth´s Mightiest Heroes!
I liked the character of Miss Marvel.
The figure base is Mary Batson ...3 comments |
![[Cable Custom Figure] Made from bionic commando's body, left arm is from thorbuster and the head is from gears of war figure. The head, leg and body area are all sculpted .](userimages/customs/49000/48594-1.jpg) Cable Custom Figure Marvelby toymancustomsMade from bionic commando's body, left arm is from thorbuster and the head is from gears of war figure. The head, leg and body area are all sculpted ....17 comments | ![[The Red Skull] hi people this one was made with a fantomex series 2 , repro head from ghost rider terrax series painted , boots from moon night ml .](userimages/customs/49000/48585-1.jpg) The Red Skull Marvelby JUNGLEZ_ARTShi people this one was made with a fantomex series 2 , repro head from ghost rider terrax series painted , boots from moon night ml ....4 comments |
![[Star Lord] went with the marvel now version, I used a mass effect figure and a cast that i made of aquaman painted them both up i used a mixture of metalic silver and blue citadel and here you have it STAR LORD](userimages/customs/49000/48547-1.jpg) Star Lord Marvelby MiSTER MARVELwent with the marvel now version, I used a mass effect figure and a cast that i made of aquaman painted them both up i used a mixture of metalic silve...2 comments | ![[Grizzly] Just finished my Grizzly from the X-Force and of course I wanted to share with the realm! I started with Marvel Legends Pile Driver as a base and used Bishop's head with molded hair and some added accessories. Thanks for looking guys!](userimages/customs/49000/48545-1.jpg) Grizzly Marvelby TNT CUSTOMZJust finished my Grizzly from the X-Force and of course I wanted to share with the realm! I started with Marvel Legends Pile Driver as a base and use...7 comments |
![[Gamora] Hi Guys! For my version of Gamora from Guardians of the Galaxy I started with Madames Hydra for a base, and added a DC Universe Raven head. To finish her off I added some molding and random parts that I had in my fodder. Feel free to ask any questions or leave your comments, I always appreciate the input from the Realm!](userimages/customs/48500/48496-1.jpg) Gamora Marvelby TNT CUSTOMZHi Guys! For my version of Gamora from Guardians of the Galaxy I started with Madames Hydra for a base, and added a DC Universe Raven head. To finis...24 comments | ![[The Incredible Hulk] I made this custom Hulk statue for a FB friend in England who at first wanted a Hot Toys-like Hulk to go with his collection. After starting the project I convinced him into turning this thing into a better suited statue of the Hulk.
Recipe:
Upper body was Pitt baf arms and upper chest. Head, lower abdomen and legs were the old Toybiz kick and punch Hulk(don't remember the exact name)
The fists were from a Toybiz movie rotocast Hulk
I had to extend the arms at the biceps and the wrists using dowel rods. I resculpted the hair and most of the face and sculpted over the entire body except the fists and from the knees down. I think I went overboard on the back muscles a bit putting muscles upon muscles(but oh well, he's the Hulk, hopefully nobody will notice..haha!) I made the base out sculpt and some glue and sand.
This took me several months due to time constrictions but it was well worth it after seeing the end finally
G2G4EVER! THANK YOU!](userimages/customs/48500/48486-1.jpg) The Incredible Hulk Marvelby fastfreddieI made this custom Hulk statue for a FB friend in England who at first wanted a Hot Toys-like Hulk to go with his collection. After starting the proje...16 comments |
![[Ace] This is a commission piece for the same guy I'm doing all the Flash villains for. He wants the Royal Flush gang, and thought this would make a good base. Sanded off all the mask details and hair and painted.](userimages/customs/48500/48460-1.jpg) Ace Marvelby Xysma WarhorseThis is a commission piece for the same guy I'm doing all the Flash villains for. He wants the Royal Flush gang, and thought this would make a good ba...4 comments | ![[The Punisher] When i see the Desert Duke from the POC line, i instantly though Punisher! I think it gives him more of a tactical look, street ready if you will!
Head: POC Law
Body/Legs: POC Duke
Arms: POC Snake Eyes](userimages/customs/48500/48386-1.jpg) The Punisher Marvelby Bigtrain2681When i see the Desert Duke from the POC line, i instantly though Punisher! I think it gives him more of a tactical look, street ready if you will!
He...3 comments |
![[Cyclops and Dark Pheonix] Cyclops is a Jim Lee Cyke head cast, with an unknown wrestler's body, cable boots The straps are made from ribbon cables out of an old desktop computer. Pheonix is all She Hulk with some sculpting.](userimages/customs/48500/48358-1.jpg) Cyclops and Dark Pheonix Marvelby cowboyinkCyclops is a Jim Lee Cyke head cast, with an unknown wrestler's body, cable boots The straps are made from ribbon cables out of an old desktop compute...2 comments | ![[The Black Panther] I picked up a figure at a swap meet that had awesome articulation, but the thing was broken, I also picked up a Gi Joe figure on the same day. I fixed the broken figure and took apart the GI joe character, painted the whole thing black because it was originally supposed to be a Batman, but I changed my mind because it looked so much like the Black Panther that I watched on the BET cartoon. I love those episodes that came out on BET. Just got done watching them online. Who is your favorite Superhero that my be under exposed or may just be getting his or her own show? I wish they would have continued that series, because those episodes are awesome!](userimages/customs/48500/48246-1.jpg) The Black Panther Marvelby LuvNidlenessI picked up a figure at a swap meet that had awesome articulation, but the thing was broken, I also picked up a Gi Joe figure on the same day. I fixed...2 comments |
![[Grey Hulk] Just a basic repaint of a hulk figurine.Wanted to try out the new paint i got on a smaller scale before i try a bigger one.I really like it. If you guys like it and want to see more grulks let me know.](userimages/customs/48500/48244-1.jpg) Grey Hulk Marvelby lonewolf77Just a basic repaint of a hulk figurine.Wanted to try out the new paint i got on a smaller scale before i try a bigger one.I really like it. If you gu...3 comments | ![[Championpool (Pirate)] this is the first in a series of the crew of the Deadpool.
recipe:
torso- ML BAF Terrax
head- ML Drax
hair- Turnbull (Jonah Hex movie)
arms- DCUC BAF Despero
legs- WWE Kane
boots- Medeval Spawn
skirt- PotC Sao Feng
weapons & straps- fodder
i had fun making him aswell as the rest of the crew. hope to have them posted soon](userimages/customs/48500/48167-1.jpg) Championpool (Pirate) Marvelby braleefunthis is the first in a series of the crew of the Deadpool.
recipe:
torso- ML BAF Terrax
head- ML Drax
hair- Turnbull (Jonah Hex movie)
arms- DCUC BA...2 comments |
![[Cannonball] Hey again Realm! Had to share Cannonball especially since I'm so proud of his base, glue guns are so awesome!! Worked really well for the smoke flames. I used two different DC figures for the base, a little molding, some paint and hopefully you guys agree he's a decent looking Cannonball! Thanks for looking guys!](userimages/customs/48500/48166-1.jpg) Cannonball Marvelby TNT CUSTOMZHey again Realm! Had to share Cannonball especially since I'm so proud of his base, glue guns are so awesome!! Worked really well for the smoke flame...7 comments | ![[Captain Canuck] Here is Canada's Favorit masked hero, CAPTAIN CANUCK
recipe
Body cant remember
Head Batman
Legs and arms Taskmaster
Belt, Leaf on chest and baton holders are all apoxy
And a paint job.
The only real difference is I changed the front logo to a maple leaf.
thanks for looking](userimages/customs/48500/48097-1.jpg) Captain Canuck Marvelby Darth_Reign_Here is Canada's Favorit masked hero, CAPTAIN CANUCK
recipe
Body cant remember
Head Batman
Legs and arms Taskmaster
Belt, Leaf on chest and baton...3 comments |
![[Magneto Force Field] Wire
Glue Gun and Glue Stick
Clear Paint](userimages/customs/48500/48050-1.jpg) Magneto Force Field | ![[The Fury and Captain Britain - Crooked World] A Request from an facebook friend. The Fury was started on the 30th January 2013 and finished on the 14th of March 2013. Initially this was going to be an articulated action figure but as the project progressed the customer decided he liked the idea of a statue of the Fury with Captain Britain defeated at his feet. He provided me with a reference shot which he wanted me to follow as closely as possible. I think I did it pretty good justice. Here's the recipe for the Fury vs Captain Britain.
The fury = House of the dead Hydrophant, completely sculpted over.
Cannon arm = sculpted from scratch, the smaller barrels are pieces of an ice armour he-man staff. The smoke tendril is hot glue and the wire from it is headphone wire.
Right arm = sculpted again with some Gundam sword handles for the extra barrels.
Lower legs = Dr.who Werewolf, completely sculpted over and reshaped
Captain Britain body, arms and upper legs = DCUC Green lantern, almost completely sculpted over to rid him of a](userimages/customs/48000/47992-1.jpg) The Fury and Captain Britain - Crooked World Marvelby DarththomasA Request from an facebook friend. The Fury was started on the 30th January 2013 and finished on the 14th of March 2013. Initially this was going to b...43 comments |
![[Toxin] I decided to Toxin a shot after seeing one pop up on The Realm a few weeks ago from Raybot (which looked SICK by the way!!) I decided to go with the the grittier style Toxin.
He received layers and layers of dry brushing over black to get the aquired shade of red. Both heads and face were completely repainted. Teeth got a dirtier paint job instead of a bright white. The tongues were dry brushed a mixture of greens and yellows and then received a light coat of gloss clear to get that wet slimy look.
Be sure to check out my eBay auction as well.
Thanks for looking and hope you enjoy!](userimages/customs/48000/47942-1.jpg) Toxin Marvelby AW Custom DesignsI decided to Toxin a shot after seeing one pop up on The Realm a few weeks ago from Raybot (which looked SICK by the way!!) I decided to go with the t...10 comments | ![[Massacre] So this guy was a request but I really like the way he turned out so I wanted to share. Especially since there are so many Drax's out there it's great if we can put him to good use. So, he pretty much was just a repaint of Drax, molding to the head, a really cool vest from the new ML Captain America and some bad*** guns, ha ha! Oh and I almost forgot the mask is from a vinyl sunglass case, works great, don't ever throw them out! Thanks for looking guys!](userimages/customs/48000/47941-1.jpg) Massacre Marvelby TNT CUSTOMZSo this guy was a request but I really like the way he turned out so I wanted to share. Especially since there are so many Drax's out there it's great...10 comments |
![[Valkyrie] Hello Realm! Even though I think ML Valkyrie looks pretty good I was hoping to improve upon her sexy warrior appeal!:) To start I used DC Powergirl as a base and molded some more hair on the top. For the braids I wanted to used something that looked and moved like real hair. It seems whenever I use clay it tends to break and it limits the movement. I ended up using the string used for friendship bracelets, and blended it with the mold so it is very secure. Then I painted it which took away the stringy look and made it look like part of the figure, but with amazing movement! So excited, sorry! As any customizer knows hair can be the biggest challenge at times. All the extras are molding and luckily I found perfect weapons for her. Hope you guys enjoyed looking, thanks!](userimages/customs/48000/47939-1.jpg) Valkyrie Marvelby TNT CUSTOMZHello Realm! Even though I think ML Valkyrie looks pretty good I was hoping to improve upon her sexy warrior appeal!:) To start I used DC Powergirl ...4 comments | ![[Powerhouse] The Hercules figures are very cool to custom. If you guys look to my customs, there`s a lot of new custom that I used it as a base figure](userimages/customs/48000/47926-1.jpg) Powerhouse Marvelby MentorbreakThe Hercules figures are very cool to custom. If you guys look to my customs, there`s a lot of new custom that I used it as a base figure...3 comments |
![[Diamond] I didn`t knew this one, but it was requested to me. Most hard to do was the head. But I did it](userimages/customs/48000/47895-1.jpg) Diamond | ![[Karnak] Underground caracther, very fast custom](userimages/customs/48000/47894-1.jpg) Karnak |
![[DEADPOOL 101 (Movie Version)] DEADPOOL 101 (movie version)
head-weapon x
body-dc
legs-wolverine
belt-cable
claws-some toy
marker to draw
what do you think guys?](userimages/customs/48000/47845-1.jpg) DEADPOOL 101 (Movie Version) Marvelby megatrooperDEADPOOL 101 (movie version)
head-weapon x
body-dc
legs-wolverine
belt-cable
claws-some toy
marker to draw
what do you think guys?...3 comments | ![[Deadpool] DEADPOOL MERCENARY
head-deadpool
body-dc fig
hands-deadpool
lower legs-wolverine
sword-some samurai(has an extra knife)
pistol-some toy
belt-deadpool
knife](userimages/customs/48000/47844-1.jpg) Deadpool Marvelby megatrooperDEADPOOL MERCENARY
head-deadpool
body-dc fig
hands-deadpool
lower legs-wolverine
sword-some samurai(has an extra knife)
pistol-some toy
belt-deadpoo...5 comments |
![[Red Skull] Hello dear Realmers,
this is my version of an pumped up and scary big Red Skull.
I took the body of Major Maxim and cutted the head of. As there was no neck I had to make one using a screw and apoxit sculpt. Afterwards I took the Nekron head and shaved down the symbols from the top of his forehead. I painted the head with drybrush-style as I kind of liked the texture of the Nekron head and wanted to keep it. Finally (thanks to my friend ringomendoza who send me a picture of the right hydra symbol) I did print it on look-thrue foil and glued it on the left upper arm.
Intimidating Red Skull done!
Please leave a comment if You feel like. It´s allways much apreciated.](userimages/customs/48000/47838-1.jpg) Red Skull Marvelby Wallcrawler CustomsHello dear Realmers,
this is my version of an pumped up and scary big Red Skull.
I took the body of Major Maxim and cutted the head of. As there was...24 comments | ![[Donald Pierce (Reaver)] Inspired by Uncanny X-Men #281, I've always wanted to make this villainous group of cyborgs.
Sanded off the original base character's hair. This was my first hair sculpt using Sculpey. Complete repaint and dry brush technique using Hobby Lobby water-based paints. Then clear coat Matte-finish spray paint to protect and give it a more "new figure look". Used what fabric I had available to make a cape. And the Reaver family continues to grow!
Comments and tips appreciated.
I hope you enjoy! Thank you!](userimages/customs/48000/47825-1.jpg) Donald Pierce (Reaver) Marvelby GridagentInspired by Uncanny X-Men #281, I've always wanted to make this villainous group of cyborgs.
Sanded off the original base character's hair. This was ...3 comments |
|