![[Cy-Kill] Just like my Slag this is another "I got tons of stuff need to do something with it." projects.
I used a Maisto transforming bike and gave it an interchangable head to look like the original Cy Kills. The head was scratch made from a KO Machine wars Megatron Jet head them sanded and molded to look like Cy Kills (along with a cartoon styled 5 O'clock shadow paint job). The tire were altered to merge with the upper arms.
Cy Kill has 2 different vehicle modes 1 is the original toys bike mode with his head becoming the front of the bike (it is what it is not the best mode but its just for homage sake)
The second uses the Maisto bikes parts that pop onto ball joints to make a more modern day street bike.
As always thanks for looking,
Shinobi](userimages/customs/47500/47301-1.jpg) Cy-Kill Transformersby ShinobitronJust like my Slag this is another "I got tons of stuff need to do something with it." projects.
I used a Maisto transforming bike and gave ...10 comments | ![[Marvel Now Nick Fury] I managed to snag an extra Steve Rogers a couple weeks ago and being that I have about 8 movie Nick Fury heads lying around, I felt compelled to to make this version. This has been done before, so its nothing really new, but it was fun to work on nonetheless.
Head: Movie Nick Fury
Base: Steve Rogers
Jet-Pack: Alien Racer
Thanks for Looking!](userimages/customs/47500/47216-1.jpg) Marvel Now Nick Fury Marvel Legendsby ShinobitronI managed to snag an extra Steve Rogers a couple weeks ago and being that I have about 8 movie Nick Fury heads lying around, I felt compelled to to ma...13 comments |
![[Slag (Cybertron Mode)] Been sitting on lots of fodder and decided to try to see how many different pieces I could combine to make a feasible figure. I had a SW Clone tank lying around and started with it. After adding pieces and parts from Gundam, Roadbots, GI Joe, and various other toy lines I came up with a Cybertron Mode Slag. I felt that the stocky frame fit Slag well and it seemed to go well with the scale of FOC Grimlock.
Head - Combiner head from RID Wedge
Body - SW Clone Tank
Missle Pod - Military Set
Shot Gun - GI Joe
Sword - Roadbots
Flame Thrower - Lex Luthor Movie Figure
Shield - Gundam Wing Shield & Power Rangers spikes
As always thanks for looking,
Shinobi](userimages/customs/47500/47214-1.jpg) Slag (Cybertron Mode) Transformersby ShinobitronBeen sitting on lots of fodder and decided to try to see how many different pieces I could combine to make a feasible figure. I had a SW Clone tank ly...4 comments | ![[Batman (Marvel Legends Style)] This guy has been on the back burner since 2007. He was originally intended to be a Dark Knight Batman but after I had the sculpting done Mattel revealed the Movie Masters line. After losing motivation and 6 years later I decided to go a new route with the figure and made it into Batman with its own style that mixes both comic and movie elements together.
Head - DCUC Batman
Body - Stealth Woverine with sculpting
Lower Legs - Mr Fantastic
Arms - Wolverine with heavy sculpt and Zoids blades.
Cape - DCD Batman
After 1 heavy paint job later we get Batman](userimages/customs/47500/47035-1.jpg) Batman (Marvel Legends Style) DC Universeby ShinobitronThis guy has been on the back burner since 2007. He was originally intended to be a Dark Knight Batman but after I had the sculpting done Mattel reve...19 comments |
![[Lady Sif] Been wanting to tackle some Asgardian customs for awhile and after getting The Hobbit Tauriel figure I thought I'd try my hand at a Sif. Sif is basically a Tauriel figure merged with a McFarlane Angela and DC Direct female Dr Light. All of the LotR decorative armor mixed well with the Angela gear and merged to make a figure that does not look out of place in Asgard. She was given a head to toe repaint (skin tones aside) and we get ourselves the Lady Dif.
Body - Tauriel
Armor - Angela, Cosmic Angela
Cape - Dr Light with Digimon neck collar.
All weapons and accessories came from either the base figure or my fodder bin.
As always thanks for looking,
Shinobi](userimages/customs/47000/46951-1.jpg) Lady Sif Marvel Legendsby ShinobitronBeen wanting to tackle some Asgardian customs for awhile and after getting The Hobbit Tauriel figure I thought I'd try my hand at a Sif. Sif is basic...9 comments | ![[Shadowland Daredevil] Been wanting to make a version of Shadowland DD for quite sometime now and when trying to clean up my work zone the pieces kind of fell into place. I strayed away from the tried and true version of the SLDD and tweeked various aspects of him to give a new yet authentic feel. Being leader of the hand I gave DD wrist claws and 2 different colors for his billy clubs rope.
DD was made from:
Head - Bucky Cap
Body - TNA Wrestler
Arms - TNA Wrestler (different than body)
Lower legs - Ripclaw
DD was painted in black, greys, and various tones of red. All his accessories were from my fodder bin.](userimages/customs/47000/46757-1.jpg) Shadowland Daredevil Marvel Legendsby ShinobitronBeen wanting to make a version of Shadowland DD for quite sometime now and when trying to clean up my work zone the pieces kind of fell into place. I...16 comments |
![[Grim Reaper (Movie Style)] Well, long story short this guy was started around the time I made my Ant-Man & Wasp. He got pushed to the backburner for a while there but I finally just took the time to get him done. Basically I wanted him to have a movie vibe to him and after looking over the Dark Knight Bats for some time I found a way to implement a skull with the design that was there. Overall I'm pretty happy with his look and I finally got to use my Spidey Movie Scorpion head, lol.
Head: Scorpion Spider-Man 3 (added styrene & cuts in the side head fins)
Base: TDK Bats (Fixed broken waist with ball hinge joint)
Biceps: Batman Begins Bats
Hands: Bat Begins Bats & Sigma Six for Scythe
Cape: TDK
As Always Thanks for Looking guys!](userimages/customs/47000/46558-1.jpg) Grim Reaper (Movie Style) Marvel Legendsby ShinobitronWell, long story short this guy was started around the time I made my Ant-Man & Wasp. He got pushed to the backburner for a while there but I fin...22 comments | ![[Ultron (V3)] Getting back into customizing after a small break I decided to warm up with one of my favorite Marvel Villains to work on ULTRON.
Tried making a version that would blend well with either comic series Marvel Legends or the Movie Legends figures.
Ultron was made from:
Body - DC Direct Cyborg
Arms - DC Direct Armory Batman
Canon Arm - Cyborg
Head - Ultron from ML Series 8 Iron Man base and fodder
He was based black then repainted with Runefang Steel and filled with Mechrite Red/ Transparent red mix.
As always thanks for looking,
Shinobi](userimages/customs/46500/46441-1.jpg) Ultron (V3) Marvel Legendsby ShinobitronGetting back into customizing after a small break I decided to warm up with one of my favorite Marvel Villains to work on ULTRON.
Tried making a vers...16 comments |
![[Insecticon Infest] Infest is another original Insecticon I came up with.
She is skilled in both small arms and bladed weaponry. Her extra arms give her an advantage being able to focus on enemies at a distance and up close. Like most Insecticons she can produce copies of herself, but unlike them if her original body is destroyed her spark can traverse to the nearest copy thus making it "Infest Prime". Along with her body transition her body produce and acidic toxin making for a defense that keep enemy hands off of her and most of the other Decepticons.](userimages/customs/46000/45863-1.jpg) Insecticon Infest Transformersby ShinobitronInfest is another original Insecticon I came up with.
She is skilled in both small arms and bladed weaponry. Her extra arms give her an advantage ...12 comments | ![[Swoop (Movie Style)] Picked up a movie Air Raid and finally got around to painting him into a Swoop.
It was a simple repaint done into his Classic colors. Tons and tons of details went into this guy to make all the detailing pop on this guy.
I drilled a hole into the dish that a plug can be inserted into to hold it into the gun position.
I have been PMed and asked many of times what paint colors I use on my figures. Some people think that its maybe 4 or 5 colors but in fact tons of colors goes into one of these pieces. I present to you the complete list of colors used on Swoop.
Krylon: Camo Ultra Flat Black
Testors: Gloss Black, Flat Black, Insignia Red
Vallejo: Transparent Yellow, Transparent Blue, Matte Finish
Citadel: Mechanicus Grey, Codex Grey, Mordian Blue, Necron Abyss, Altdorf Guard Blue, Averland Sunset, Dwarf Bronze, Mechrite Red, Mephiston Red, Blood Red, Chainmail Silver, Runefang Steel.
Thanks for looking,
Shinobi](userimages/customs/45500/45360-1.jpg) Swoop (Movie Style) Transformersby ShinobitronPicked up a movie Air Raid and finally got around to painting him into a Swoop.
It was a simple repaint done into his Classic colors. Tons and ton...5 comments |
![[Rad] Rad was made using the Chevy Aveo mold (dont remember the figure name) merged with an original rad. The factory red was left as is but his inards have been tweeked and detailed to bring more life into the mold.
I didn't forget about Rads Lionizer partner as I used the original figure with a new paint job and reworked handles to fit into the new body.
Thanks for looking,
Shinobi](userimages/customs/45500/45103-1.jpg) Rad Transformersby ShinobitronRad was made using the Chevy Aveo mold (dont remember the figure name) merged with an original rad. The factory red was left as is but his inards hav...6 comments | ![[Drax the Destroyer (Annihilation Style)] Basically I thought the new ML Drax was a bit on the scrawny side and since I had an extra as well as a Savage Dragon around, I figured I'd visit a once popular recipe for Annihilation Style Drax. I'm not quite sure if anyone has decided to combine these two yet, but if so props to ya! So with some modding and parts swapping and a completely new paint job we get a bigger Drax The Destroyer.
Head: HML Drax
Body: Savage Dragon
Legs: HML Drax
Belt & Knives: HML Drax
Thanks for looking!](userimages/customs/45500/45102-1.jpg) Drax the Destroyer (Annihilation Style) Marvel Legendsby ShinobitronBasically I thought the new ML Drax was a bit on the scrawny side and since I had an extra as well as a Savage Dragon around, I figured I'd visit a on...11 comments |
![[The Punisher] I've had this version of Frank done for at least a month now, as usual I just had to get the finishing touches done. The Starman body had a lot of potential for a Frank so I swapped some parts and some fabrication from the movie Fury and accidentally got a close look to his PS2 game counterpart. I know he uses the look regardless in the comics, but the general build and overall look to me at least reminds me of the game. As a side note, if you're a fan of the Punisher, I really would suggest The Punisher for the Playstation 2, a lot of fun to be had with it.
This seems like a recipe that may have been used before, so if anyone has done this before, then props goes to you.
Thank you guys for looking!](userimages/customs/45000/44965-1.jpg) The Punisher Marvel Legendsby ShinobitronI've had this version of Frank done for at least a month now, as usual I just had to get the finishing touches done. The Starman body had a lot of po...16 comments | ![[The Vision] Back with another Avenger this time with the Vision.
The Vision started s a DCUC Cyclotron and was given new arms and a new head, He was painted to look like an updated version of his classics self. Since the Vision is an Android took full advantage of the Cyclotron body and gave himan alt head.
Head - DCUC Starman (modded)
Head 2 - Inner Cyclotron head
Body - Cyclontron
Arms - Movie 1 Iron Man
Cape - DCUC Gem (modded)
As always thanks for looking,
Shinobi](userimages/customs/45000/44963-1.jpg) The Vision Marvel Legendsby ShinobitronBack with another Avenger this time with the Vision.
The Vision started s a DCUC Cyclotron and was given new arms and a new head, He was painted to ...19 comments |
![[Hot Shot TFP Armada] Props to everyone else to did this before me.
After making Smokescreen I had an extra Hot Shot head that I felt would have gone better on the BB body. I like the Hot Shot figure but it still has the Sideburn vibe to it over Hot Shot.
He was basically a repaint with added detailing and a modded gun. I tried to make it look like the Armada Hot Shot only with a TFP twist to him. Just doing HS was not enough however and I found my extra Jolt and tweeked him with new ports so he can plug into the HS figure. Just like the original figure HS gun can combine with Jolt and Joly can turn into a turbo booster.
Thanks for looking,
Shinobi](userimages/customs/44500/44460-1.jpg) Hot Shot TFP Armada Transformersby ShinobitronProps to everyone else to did this before me.
After making Smokescreen I had an extra Hot Shot head that I felt would have gone better on the BB bo...6 comments | ![[Smokescreen TFP] I used Hotshot as my base and removed all of his flame paint apps. He was then sprayed with red and then I hand painted (so damn aggravating) the white stripe.
His head is a copied Drift face made of super sculpty rubber placed inside a Smokescreen Kreon helmet. I gave him various other details and ended up using to shades of red on him, a darker red for the exterior auto mode, then I matched the factory red to liven him up in bot mode.](userimages/customs/44500/44337-1.jpg) Smokescreen TFP Transformersby ShinobitronI used Hotshot as my base and removed all of his flame paint apps. He was then sprayed with red and then I hand painted (so damn aggravating) the whi...6 comments |
![[Nick Fury] Well, I've got around 6 or 7 of the Cap Movie Series ML Fury just clogging up my fodder bin. While trying to think of some characters who I could make from him, I came up with making...Nick Fury. Went thru my parts bin and found some cool pieces to add to him and so from that I got a Nick Fury in winter clothes, lol.
Head: ML Nick Fury
Base: Movie Series Nick Fury (with cut, peg, then "paste" movie Bane boots)
Hands: LOTR
Coat: TDKR Bane
Anything else came from fodder
The usual prep work in getting the figure ready, then washed. Repainted everything except the pants, belt and Bane's jacket(the gold buttons were painted though). It's nothing too complicated, but it was pretty fun to work on regardless.
Thanks for Looking Everyone!
**I'll be sure to give my thanks to everyone for the great comments on my last several customs. It's getting pretty late right now, lol. Thanks again guys!**](userimages/customs/44500/44068-1.jpg) Nick Fury Marvel Legendsby ShinobitronWell, I've got around 6 or 7 of the Cap Movie Series ML Fury just clogging up my fodder bin. While trying to think of some characters who I could mak...14 comments | ![[Batman / Batmobile Transformer] This was a no brainer and props to anyone who did this before me (if it has been done).
Took the Vehicon figure and added fins to it and yellow headlights. The back section was retooled with a jet engine and he was given a TDKR head. Made him a grapple gun and gave him an extra DC Classics Batarang and we got Batman.
Hardest part of this figure was creating a bat symbol for his chest. (freehand drawing with paint is rough lol)](userimages/customs/44500/44062-1.jpg) Batman / Batmobile Transformer Transformersby ShinobitronThis was a no brainer and props to anyone who did this before me (if it has been done).
Took the Vehicon figure and added fins to it and yellow headl...10 comments |
![[Avengers Movie Style Ant-Man] Ant-Man & Wasp are 2 characters I've been wanting to tackle for awhile now. I had both of these in parts to be made into comic versions but decided to go with possible movie costumes had they appeared in the Avengers movie. I really wish they would have considering they were 2 of the original founding members, but they weren't ... at least Ant-Man is getting a movie so more than likely we'll get to see Janet and hopefully Ultron will get in there too. Anyways onto the figures:
Ant-Man
Helmet head: Hasbro tech armor black spiderman (with sculpt inside for filling & antennas attached)
Unmasked: Harvey Dent (untouched, looked good enough as is for what I wanted)
Base: TDK Batman (sanded, smoothed, then sculpted new chest piece, & filled in shoulder & back holes)
Forarms: Batman Begins
Hands: TDK Batman
Ants from dollar store and everything else came from fodder
Usual Prep and then paintwork on Ant-Man and his ants.
Side note: The Aaron Eckhart head was a last minute](userimages/customs/44000/43836-1.jpg) Avengers Movie Style Ant-Man Marvel Legendsby ShinobitronAnt-Man & Wasp are 2 characters I've been wanting to tackle for awhile now. I had both of these in parts to be made into comic versions but decid...42 comments | ![[Avengers Movie Style Wasp] Wasp & Ant-Man are 2 characters I've been wanting to tackle for awhile now. I had both of these in parts to be made into comic versions but decided to go with possible movie costumes had they appeared in the Avengers movie. I really wish they would have considering they were 2 of the original founding members, but they weren't ... at least Ant-Man is getting a movie so more than likely we'll get to see Janet and hopefully Ultron will get in there too. Anyways onto the figures:
Wasp
Head: Critical Maas (solid white version)
Base: TDKR Catwoman (with sculpted on details)
Hands: Raven
Wings: Modified Tron wings
Everything else came from fodder or sculpt
Usual Prep and then a full new paint job.
Thanks as always for looking!](userimages/customs/44000/43835-1.jpg) Avengers Movie Style Wasp Marvel Legendsby ShinobitronWasp & Ant-Man are 2 characters I've been wanting to tackle for awhile now. I had both of these in parts to be made into comic versions but decid...35 comments |
![[Guzzle] Guzzle here took a lot of reworking to change from a mobile missile battery to a tank. The arms were modified to slide higher to prevent the ape look. The head and chest were courtesy of Shapeways. The chest piece did not align correctly and had to be modified to sit properly . The missile turret was removed and replaced with a diecast tank turret. The turret is electronic and when the top button is pressed it makes tank sounds and the gun barrels light up.
As a final mod the claw hands where removed and replaced by HG Gundam hands (RIP HG MS1).
After giving him an all new paint job Guzzle is ready to join the rest of the Wreckers.](userimages/customs/44000/43768-1.jpg) Guzzle Transformersby ShinobitronGuzzle here took a lot of reworking to change from a mobile missile battery to a tank. The arms were modified to slide higher to prevent the ape look...4 comments | ![[FF She Hulk] I wanted to update a She Hulk into her sometimes Fantastic Four Uniform and had a chance when I grabbed another of the TNA female wrestling figures. Instead of the unitard however I wanted to modernize her with a sports bra and yoga pants.
Head - Mary Batson with Mileena Hair
Body - TNA Female
Feet - Johnny Cage](userimages/customs/43500/43389-1.jpg) FF She Hulk Marvel Legendsby ShinobitronI wanted to update a She Hulk into her sometimes Fantastic Four Uniform and had a chance when I grabbed another of the TNA female wrestling figures. ...7 comments |
![[The Amazing Spiderman] I picked up the new Amazing Spider-Man figure a few weeks ago and actually had him nearly complete, but I wanted to finish my last Turtles set & Spyke before I got him done. I managed to get some free time this weekend so I took this time to get him finished. I'm sure others have already given him a repaint and what not, but I wanted to give mine just some extra stuff that he had in the movie.
Base: New Amazing Spider-Man (Added Magnets in feet & hole in back for base flight stand)
Unmasked Head: Superman Returns Supes (with resculpted jaw line and hair)
Accessories: Web ball, phone, & backpack were cobbled together with fodder
Funny enough I just found out that Hasbro is making an unmasked version that comes with a backpack and other stuff, lol. Still, it's a pretty fun figure to paint up none the less. Also the pic with Spidey jumping over the Lizard is all him, I still can't believe I managed to get him to stay on his own, lol.
Thanks as always for looking!](userimages/customs/43500/43188-1.jpg) The Amazing Spiderman Marvel Legendsby ShinobitronI picked up the new Amazing Spider-Man figure a few weeks ago and actually had him nearly complete, but I wanted to finish my last Turtles set & S...14 comments | ![[Michelangelo] Funny enough, I forgot about getting my first Mikey posted on here. The new one made me remember about it, lol. Anyways here is the Mikey from the first set of turtles I did.
Thanks for looking as always guys!](userimages/customs/43000/42830-1.jpg) Michelangelo |
![[Spyke] I've had this idea brewing for quite some time, so a few months back I decided to piece together the Lcbh Judge Dredd that I had leftover with my broken Spyke and Miles Mcquaritch arms to get this mashup. A lot of cutting and pasting with a decent amount of filling and dremmeling to get everything flush and smooth for the most part. I know this isn't an exact match to his Evolution counterpart, but I just wanted to tweak his costume a bit. Everything else is fodder parts and what not.
Thanks for looking everyone!](userimages/customs/43000/42806-1.jpg) Spyke Marvel Legendsby ShinobitronI've had this idea brewing for quite some time, so a few months back I decided to piece together the Lcbh Judge Dredd that I had leftover with my brok...13 comments | ![[Michelangelo (Mirgae Studios)] Next up is mikey. Like the others, he was given an intense black wash with thick black lining to make him feel like he was pulled from the comics. His Bandanna and belt was repainted red and real chain added to his chucks.
Thanks for Looking!](userimages/customs/43000/42804-1.jpg) Michelangelo (Mirgae Studios) |
![[Donatello (Mirage Comics)] Next up is Donny. Like the others, he was given an intense black wash with thick black lining to make him feel like he was pulled from the comics. Donny like my Leo has an altered chest harness to match my source material which was TMNT #4 (the same picture was used as the TMNT NES game cover). His Bandanna was repainted red and silvers added to his weapons.
Thanks for Looking!](userimages/customs/43000/42747-1.jpg) Donatello (Mirage Comics) | ![[Raphael (Mirage Comics)] Again like my previous Raph, this one got extra damage added to his chest and back shell. He was given an intense black wash with thick black lining to make him feel like he was pulled from the comics. My source material which was TMNT #4 (the same picture was used as the TMNT NES game cover). His Bandanna was repainted red and silvers added to his weapons.
As always thanks for the comments and thanks for looking!](userimages/customs/43000/42746-1.jpg) Raphael (Mirage Comics) |
![[Leonardo (Mirage Comics)] Leo was the first figure I completed. He was given an intense black wash with thick black lining to make him feel like he was pulled from the comics. Leo has an altered chest harness to match my source material which was TMNT #4 (the same picture was used as the TMNT NES game cover). His Bandanna was repainted red and silvers added to his weapons.](userimages/customs/43000/42696-1.jpg) Leonardo (Mirage Comics) | ![[The Shredder (Mirage Comics)] Finally got to finish my second set of TMNT. This time I included Shredder as the bonus character. This set is based on the first appearance of the TMNT.
Shredder is the original TMNT figure with a sash from Electra and a belt from a WWE knee pad. He was given a crimson paint job and detailed with thick black lines to get the comic feel.](userimages/customs/43000/42695-1.jpg) The Shredder (Mirage Comics) |
|