![[Magneto] I tried to capture all the elements of my fave Magneto appearances over the years. The head collar thing and feet are from the original ML Magneto, the torso is from the XMC Mags, the arms and legs are from a movie Mr. Fantastic and the helmet and shoulder pads are from the X-Man evolutions Mags. The cape is from some LOTR figure. I was going to paint it purple, but I kind of like the black cape look.](userimages/customs/30500/30269-1.jpg) Magneto Marvel Legendsby Delta TI tried to capture all the elements of my fave Magneto appearances over the years. The head collar thing and feet are from the original ML Magneto, t...1 comments | ![[Supergirl] This custom is from a bunch of diff Supergirls. The torso and legs are from a DCU Supergirl, the arms and cape are from a DC Direct Super / Batman series Supergirl and the head is either from the DC Armory Flamebird or Nightwing. I basically did this to use up all the spare Supergirl parts that I had used parts for on other customs.](userimages/customs/30500/30266-1.jpg) Supergirl DC Universeby Delta TThis custom is from a bunch of diff Supergirls. The torso and legs are from a DCU Supergirl, the arms and cape are from a DC Direct Super / Batman ser...7 comments |
![[Marlowe] "God? *looks around* No god" This one is pretty simple. The head, hands and coat are off of the 30 Days of Night Marlowe, the rest is a Destiny Spike with sculpting for the shirt. I did it because I hate when figures have limited articulation and so I could make him fight my Blade figure.](userimages/customs/30500/30214-1.jpg) Marlowe | ![[Darkhawk Battle Mode] So I have a confession... Darkhawk is actually my favorite Marvel character. When I started making this figure it wasn't supposed to be a "lets see how much crap I can cram this figure" fest, but It kind of turned out that way. I like how his battle mode is now variable so I took some creative liberties here and there... bear with me.
Recipe:
Head: LCSH Star (I think)
Torso & thighs: LCSH Super Patriot
Upper arms: ML Silver Surfer (I think)
Lower arms: X-Men Evolutions Magneto
Hands LCSH Darkness
Shins: XMC Magneto
Feet: BSG Cylon.
The Blade on his hand is from a Hellboy Kronen Figure, the wings on his arms are from a 90's Toy Biz Vulture; the arms were dremeled out a bit and the wings are glued in. The lasers in his chest are from a McFarlane Shadowhawk, one of his guns is from an old Transformer figure, the other is from an XMC Beast figure, and finally the removable wings on his back are from an XMC Archangel. There's some sculpting on the head, chest and thighs and th](userimages/customs/30500/30204-1.jpg) Darkhawk Battle Mode Marvel Legendsby Delta TSo I have a confession... Darkhawk is actually my favorite Marvel character. When I started making this figure it wasn't supposed to be a "lets s...4 comments |
![[Delta T(Ango)] Update: I've had short hair now for a little while and I wanted that reflected in the Delta T figure. Basically alls I did was add a wallet chain, give him the boots from a Bat man Begins figure, re-sculpt the hair, sand down the face a little bit and repainted them both.
So this is the Dan T "Delta T(ango)" figure. The recipe is as follows:
Everything but the head and feet: Destiny Spike,
Feet: Some Ninja Turtle figure,
Head: Star Trek Movie Chekov. I'm not exactly saying that I look Like Anton Yelchin here, but it's close enough. If I ever do another one I'll probably get a head made off of thatsmyface(dot)com. The Hood, cargo pockets, pouch on the hoodie and hair are all sculpted as well as the elastic cuffs on the sleeves and bottom of the hoodie. The coffee cup is also from a Buffy figure as well.
I probably should have submitted this for the make yourself contest a little while, but I now have a Dan figure to fight zombies and hang out with my favorite characters. Any](userimages/customs/30500/30145-1.jpg) Delta T(Ango) Self Customsby Delta TUpdate: I've had short hair now for a little while and I wanted that reflected in the Delta T figure. Basically alls I did was add a wallet chain, giv...3 comments | ![[Sekhmet the Warlord of Venom] Sekhmet is similar to My Cale and Dais but his torso is from a ML Iron Fist instead of an HML Nova so I could make his shoulders a little more broad. The legs and arms are from the HML nova and the hands are from Bullseye. I was really glad that I was able to do this restoration because the Dark Warlords were some of my favorite figures as a kid. I also like 6" scale better than 5" scale, sow now they're in scale with the rest of my figures. Now that I have all 4 warlords with Talpa and my Ancient custom, I might start on some of the Ronins and White Blaze! Hope ya dig, Thanks for looking](userimages/customs/30500/30111-1.jpg) Sekhmet the Warlord of Venom Ronin Warriorsby Delta TSekhmet is similar to My Cale and Dais but his torso is from a ML Iron Fist instead of an HML Nova so I could make his shoulders a little more broad. ...6 comments |
![[Berserker Predator] Head, forearms lower legs and armor are from the Neca Predators line. the torso and upper arms are from some LOTR Uruk kai figure. Basically I wanted him do look a little more filled out. I thought the original was too skinny. I also used sculptu to make the neck a little longer.](userimages/customs/30500/30110-1.jpg) Berserker Predator Predatorby Delta THead, forearms lower legs and armor are from the Neca Predators line. the torso and upper arms are from some LOTR Uruk kai figure. Basically I wanted ...3 comments | ![[Dais the Warlord of Illusion] This one is the same as Cale, Its an HML Nova, the chest is sculpted, the hip guard is foam board and the rest is off of the 90's Playmates figure. On this one I also had to remake his antlers out of foam board because the old ones broke and I made his Nunchucks and morningstar removable.](userimages/customs/30500/30052-1.jpg) Dais the Warlord of Illusion Ronin Warriorsby Delta TThis one is the same as Cale, Its an HML Nova, the chest is sculpted, the hip guard is foam board and the rest is off of the 90's Playmates figure. On...2 comments |
![[Cale the Warlord of Corruption] Seeing that awesome Anubis in the armor up contest inspired me to finally post these guys. Long story short is that all of my old Dark Warlord figures figures were falling apart and breaking so I put the armor from the 5" scale guys on to 6" scale figures. The base is a HML Nova figure with parts here and there from other figures that use that body style (Moon Knight, Bullseye, etc)here and there. The helmet, sword, shoulder armor, fore arm armor knee guards, foot armor and black spikey things on the chest are all from the original playmates Cale. The chest is sculpted, the hip armor is made from foam board and I think the cape is from a Scarlet Witch figure. Thanks for looking!](userimages/customs/30500/30051-1.jpg) Cale the Warlord of Corruption Ronin Warriorsby Delta TSeeing that awesome Anubis in the armor up contest inspired me to finally post these guys. Long story short is that all of my old Dark Warlord figures...2 comments | ![[Samus Aran] Helmet: Scratch made, but the visor is from Sigma 6 figure and the hoses are from the fodder bin.
Head: Claire Redfield
Body / Legs: Armory Batman
Left forearm: HOM Iron Man
Left hand: Thorbuster Iron Man
Gun arm: XMC gun from Beast
Hey there, Here is My Samus Aran figure. The body is from an Armory Barman, I used the shoulders, jetpack thingies from the old Nintendo Power Samus, The knee things are from some Shredder figure, the wings on the feet are from a Namor figure and everything else besides what I maned above is sculpted.
Hope a dig!](userimages/customs/30500/30041-1.jpg) Samus Aran Metroidby Delta THelmet: Scratch made, but the visor is from Sigma 6 figure and the hoses are from the fodder bin.
Head: Claire Redfield
Body / Legs: Armory Batman
Lef...3 comments |
![[Onslaught 2.0] I've been working on this custom since November, mostly because I'd get frustrated and throw him back on the backburner, lol. Anywhoozle, long story short he's a lot of sanding and sculpting, so if your gonna leave any critisizms, please be gentle. This is hands down the most work I've ever put into a custom.
I've seen a lot of the SMC Veonm Onslaughts which are awesome, but I wanted him bigger! I also toyed with the possability of making a combination of the "Spartan" and the "Crab" incarnations, but I liked his spartan visage better.
He started out as an HML Wendigo. I sanded off all of the fur, pulled out his tail, filled it in, and rebuilt the neck so it wasn't too far forward.
The head is from an ML Onslaught BAF with the helmet entirely sculpted and his hands are from an SMC Scorpion Venom. I sculpted the collar, all the detail below the pects, on the lower torso, wrists, hips, thighs, shins and feet. The shoulders, wrist guards, knee guards, calf guards and](userimages/customs/16000/15859-1.jpg) Onslaught 2.0 X-Menby Delta TI've been working on this custom since November, mostly because I'd get frustrated and throw him back on the backburner, lol. Anywhoozle, long story s...2 comments | ![[Deadpool 2.0] I know exactly what you're thinking; "Just what the realm needs, another stupid Deadpool figure." I couldn't agree more, but I've never done a 616 Deadpool before and I wanted to hop on the trend train before it left the station lol. The recipe is straightforward; don't know who started the trend - although I'm lead to beleive it was K.R. I used the boots from the Movie Masters Dark Knight as my own interpratation of his "comic awareness". The only sculpting was the little symbols on his hands and belt, and his sword holders. I tried to hollow out his left eye to make it look opened wider - thus giving him a slightly confused and / or intrigued look. The swords and sai's are from the Ronin / Elektra 2-pack, the holster is from the ML6 Punisher, the pouches on his other leg started out from an ML Bullseye, but I botched that so got them from my fodder bin. The 2 tanto's are from a 2000AD figure, the pistol is from the WW2 cap America, and the G-36 is from a Terminato](userimages/customs/15000/14805-1.jpg) Deadpool 2.0 X-Menby Delta TI know exactly what you're thinking; "Just what the realm needs, another stupid Deadpool figure." I couldn't agree more, but I've never done...0 comments |
![[Deadpool - Ultimate] I took a few notes from TP Custom Studios and Ivory gleam on this one. I've liked this incarnation of Wade for a while and always wanted to do one, so after being on the backburner for about a year, I finally did it. It''s a fairly straightforward recipe, the only sculpting was on the sleeve cuffs.
Thanks for looking.](userimages/customs/15000/14804-1.jpg) Deadpool - Ultimate X-Menby Delta TI took a few notes from TP Custom Studios and Ivory gleam on this one. I've liked this incarnation of Wade for a while and always wanted to do one, so...1 comments | ![[Anubis the Warlord of Cruelty] Anubis is my favorite anime character and arguably my favorite character from anything in general. It may not be my best work, but it was really fun and easy to make. I have tried for years in vain to make a Warlord of Cruelty Anubis in vain until it hit me like a truck one day. HML Ronin has the gii and build for it plus his name is right in the title. I'm a little embarrassed it didn't hit me sooner. I swapped out the shins with a ML Moon Knight to make him a little taller and attached the armor (which is from the original Anubis figure) with apoxie sculpt and super glue. The head is a heavily cut down 1st app Punisher, and the neck had to be cut off and remade with apoxie as he had a brontosaurus neck going for him. The faceplate is from a Hellspont figure from the Wildcats series, the Kama blade is also from the original Anubis, the handle is from an LOTR Witch King, the chain and spike are from a Ghost Rider, and the prongs at the bottom of the chain are from some Shredder.
Thanks](userimages/customs/15000/14797-1.jpg) Anubis the Warlord of Cruelty Ronin Warriorsby Delta TAnubis is my favorite anime character and arguably my favorite character from anything in general. It may not be my best work, but it was really fun a...1 comments |
![[Ghost Rider] This is just a quick mod on the ML Ghost Rider, I hated his legs and opaque head and neck flames so I swapped the legs out with the waist and thighs of Savage Dragon figure while keeping the GR boots, to do this I had to perform the dreaded "torso crack". The opaque head flames were cut off and sanded down and replaced with the flames from one of the movie figures, the opaque neck flames were replaced with the translucent Vengeance neck flames and although the pictures don't show it too well, there's also a stack of vertabrae holding the head to the neck flames. The Chopper was from a GR statue.
Thanks for looking](userimages/customs/15000/14796-1.jpg) Ghost Rider Marvel Legendsby Delta TThis is just a quick mod on the ML Ghost Rider, I hated his legs and opaque head and neck flames so I swapped the legs out with the waist and thighs o...2 comments | ![[Terminator CSM 101] I wanted a Terminator figure that looked like the endoskelaton would actually be able to fit inside, and since Ah-nold is only about 5'11 anyway I said "This works out great, these new Salvation figures are approx 1/12 scale anyway." The figure was an Aoshima 1/12 Terminator whose legs got yanked off (I doubt that the terminators are 7 feet tall and it had a "v" crotch anyway) and replaced with the waist and thights of the ML4 Punisher and knees and shins of the ML6 Punisher, and bingo, a 6 ft Terminator to scale with the endoskelaton. I also touched up Arnie's face because the factory paint job was blotchy, and I don't think that killer cyborgs from the future get rosecha. The endoskelaton also has a black wash and I beleive boltgun metal drybrush.
Thanks for looking!](userimages/customs/15000/14795-1.jpg) Terminator CSM 101 Terminatorby Delta TI wanted a Terminator figure that looked like the endoskelaton would actually be able to fit inside, and since Ah-nold is only about 5'11 anyway I sai...3 comments |
![[Cpl. Dwane Hicks] Head: McFarlane Cpl. Hicks
Torso: ML 4 Punisher
Arms: ML 6 Punisher
Legs: XMC Cyclops
Boots: ML Frankenstein
The rest is just the armor accessories from the Hicks figure and a paintjob. I went with the tiger stripes cus I couldn't pull off the woodland cammo theme. I tried to do the shinpads as well, but they didn't look right.
Thanks for looking.](userimages/customs/14000/13958-1.jpg) Cpl. Dwane Hicks Aliensby Delta THead: McFarlane Cpl. Hicks
Torso: ML 4 Punisher
Arms: ML 6 Punisher
Legs: XMC Cyclops
Boots: ML Frankenstein
The rest is just the armor accessories fr...2 comments | ![[TDK Joker] I have never known such frustration as painting pinstripes on a figure. Anyway, I wanted to update him a bit.
Much like my Batman, I wanted to make Joker a little taller and more articulate so I just swapped the head, chain and jacket to the ML Dracula figure which is really just a ML Prof X anyway. The hands are from my fodder bin, and the Thompson is from the HML Capt. America.
I tried to touch up the face but stopped before I made it worse. The rest is just a paintjob with the games workshop paints.
Thanks for looking.](userimages/customs/14000/13957-1.jpg) TDK Joker Batmanby Delta TI have never known such frustration as painting pinstripes on a figure. Anyway, I wanted to update him a bit.
Much like my Batman, I wanted to make Jo...1 comments |
![[Dark Knight Batman] I wanted to make my Movie Masters Batman a little bit taller so I cut off his boots and gave him the boots from the Total Control Batman Begins figure. I also re-did the paint scheme using a flat black for the mesh, gunmetal for the armor panels, semi-gloss black for the boots, gauntlets, and bat symbol, metallic yellow (like the way that K.R. put in his tutorial) and the head was also supposed to be gunmetal, but the paint dried too tacky (sticky not gaudy) so I did it with a chaos clack. The gun is custom made with parts from various ML guns, Aliens Ressurection guns and C.O.P.S. guns, also with the metallic finish. Finally the fabric cape is also from the Total Control figure.
Thanks for looking.](userimages/customs/14000/13956-1.jpg) Dark Knight Batman Batmanby Delta TI wanted to make my Movie Masters Batman a little bit taller so I cut off his boots and gave him the boots from the Total Control Batman Begins figure...1 comments | ![[Firefly] Head and arms: HML Union Jack
Everything else but the boots: ML Taskmaster
Boots: XMC Cyclops
The recipe is pretty straightforward, I used the tac-harness and handguns from the HML Ult Nick Fury, the grenades are glued on the harness, the backpack (which is held on with a bent over paperclip, lol)was from some GI Joe guy, the leg pouches were from my fodder bin, ammo mags are from the ML 6 punisher, the shoulder pouch is from the LCSH Wraarl and finally the gun is custom made with parts from the matrix gun, the ML 6 Punisher gun, Hitmansilencer and scope and buttstock from some m-4 I had kicking around.
Hope ya dig, thanks for looking.](userimages/customs/14000/13955-1.jpg) Firefly G.I. Joeby Delta THead and arms: HML Union Jack
Everything else but the boots: ML Taskmaster
Boots: XMC Cyclops
The recipe is pretty straightforward, I used the tac-har...1 comments |
![[Predalien] I couldn't stand the "Thriller" pose the factory Predalien was in so I took the head, hands, feet, tail and proboscus things on their backs from the Predalien and put them on the warrior alien. The shoulders, chest and part of the back were sculpted. It was repainted and voiala.
Thanks for looking.](userimages/customs/14000/13952-1.jpg) Predalien | ![[Wolf Predator] Update: I cut the netting off of the right arm and legs to fix the armor and also made the faces interchangeable.
My props to Custombros2.5 for the Idea, this is just the highest degree of flattery, lol.
Head, Shins, Forearms and Hands: Neca AVPR Wolf Predator.
Torso, Upper arms and Thighs: ML Blackheart.
I absolutely loved Custombros2.5's version and I had to make one for my shelf.
All of the armor pieces and weapons are also from the NECA AVPR Wolf Predator and the netting was from some halloween thing I got at Wal-Mart which was sewed in the back. I tried to get the interchangable face effect, but I didn't have any luck with it.
Thanks for looking.](userimages/customs/14000/13951-1.jpg) Wolf Predator |
![[Selene] First off Props to Distant Thunder from the Fwoosh for the idea, this my attempt to recreate his work.
Head: 2000AD Judge Anderson
Torso: 2000AD Durham Red
Arms: Misc ML arms from the fodder bin.
Hands: One of the Buffy figures
Legs: The same Buffy figure as the hands.
Boots: ML X-23
The hair was sculpted, and the head had to be apoxie sculpted on as well. She was fully repainted, but I couldn't quite get the eyes icy enough. The G-18's are from the McFarlane Morpheus and the ammo mags are from the ML 6 movie Punisher.
Thanks for looking.](userimages/customs/14000/13949-1.jpg) Selene Underworldby Delta TFirst off Props to Distant Thunder from the Fwoosh for the idea, this my attempt to recreate his work.
Head: 2000AD Judge Anderson
Torso: 2000AD Durha...0 comments | ![[AOA Forge] Thank you for looking, my latest custom is the AOA Forge, one of my favorite AOA characters. He starts with a ML Dr. Strange head that has had the helmet sculpted on, and the eye peice is from a Batman Begins figure. The body minus the shoulders and hands is a LCSH Darkness with some minor sculpting on the thighs. The hands are from my original Knightfall Az-Bat, but I wanted Azbat to have articulated fingers so I swapped the hands out before I realized Darkness was going to be my Forge. The upper arms are from some LOTR figure, Maybe a Boromir? The robe is from a LOTR Elrond, the shoulder pads are from the 5" Toy Biz Genesis figure, and the hood is from a Ninja Turtles Karai figure albeit some major dremmeling. I didn't re-peg the elbows because I wanted to recreate the dismemberment action for his final scene. Some of the pics are of the unfinished paintjob, please don't mind as I could'nt get many good shots of the finished figure.
I hope ya'll dig and thanks for looking
DT~](userimages/customs/8000/7536-1.jpg) AOA Forge X-Menby Delta TThank you for looking, my latest custom is the AOA Forge, one of my favorite AOA characters. He starts with a ML Dr. Strange head that has had the hel...2 comments |
![[Grammaton Cleric John Preston - Equilibrium] So I've been waiting to do this one since I found out about the 6" Dark Knight line. The base is the Gotham City Thug With the Christian Bale Bruce Wayne head. The coat is from the ML movie Punisher with some electrical tape on the front to hide the seam, and the pistols are from a 2000 AD figure - I wanna say her name is Durham Red. So basically its a head swap and paintjob, but it was a lot of fun to do and I finally get to give tribute to one of my favorite dystopian future movies of all time.
Hope ya'll dig
DT~](userimages/customs/8000/7501-1.jpg) Grammaton Cleric John Preston - Equilibrium Movie Maniacsby Delta TSo I've been waiting to do this one since I found out about the 6" Dark Knight line. The base is the Gotham City Thug With the Christian Bale Bru...4 comments | ![[AOA Morph] Morph here is a Fantastic 4 movie Reed Richards with an ML Prof X head. The cape is from a DCSH Red Tornado. I went with this specific base so that he would have all of the extensions for making him even more strange than he is. I've noticed that a lot of people that have made him make him look so serious. I wanted to make him the way I'll always remember him; COMPLETLEY INSANE!!!
Thanks for looking, I hope that ya'll dig
DT~](userimages/customs/7000/6850-1.jpg) AOA Morph X-Menby Delta TMorph here is a Fantastic 4 movie Reed Richards with an ML Prof X head. The cape is from a DCSH Red Tornado. I went with this specific base so that he...2 comments |
![[Paul Smecker - Boondock Saints] RAH THERE WAS A FIREFIGHT!!! Hello everyone This is Paul Smecker, the FBI agent from my favorite movie Boondock Saints. Paul is just an ML Prof. X with a Spiderman movie Norman Osborn head. the hands were out of my fodder bin and the pistol is from an N2 matrix Neo. After a quick paint job he's ready to go fight "evil men" with The McManus brothers (whenever I figure out how to make em)
Thanks for looking
DT~](userimages/customs/7000/6848-1.jpg) Paul Smecker - Boondock Saints "V"by Delta TRAH THERE WAS A FIREFIGHT!!! Hello everyone This is Paul Smecker, the FBI agent from my favorite movie Boondock Saints. Paul is just an ML Prof. X wit...3 comments | ![[AOA Iceman] After several failed incarnations of this figure, I finally came up with one that I like. The head is from a LCSH Darkness figure, the torso and t-crotch are from a DCSH Red Tornado, The arms and stalagmites are from a DCSH Doomsday, the legs are from a DSCH Superman, and finally all of the attatchments are from the various 90's Toybiz Iceman's. I know that there is some paint rub on the shoulders, but sanding it down a little bit and sealing it don't seem to do the trick for me so if there are any suggestions, I'm all ears.
Thanks for looking and I'd love to hear any creative critisizms.
Thanks
DT~](userimages/customs/7000/6653-1.jpg) AOA Iceman X-Menby Delta TAfter several failed incarnations of this figure, I finally came up with one that I like. The head is from a LCSH Darkness figure, the torso and t-cro...6 comments |
![[Talpa] I have been a fan of the Ronin Warriors series for the better part of 15 years now; in fact RW was what introduced me to Anime. I find it somewhat disheartening that no one else seems to remember the show. Anyways to pay tribute to one of my all time favorite anime’s; I have recently made the show’s main antagonist Tapla. Talpa started out as a Final Fantasy XII Judge Master Gabranth. The main part of his armor (from shoulders to hip guards) is from a Sigma 6 Storm Shadow that has been highly sculpted over. The vast majority of the head with the exception of the blades is sculpted. The armor on the forearms and feet are sculpted and also use parts from Storm Shadow. The hair is string that has been super-glued to keep it straight. The toes are from the same Storm Shadow and all of the blades/swords and knee guards are from the original Talpa figure from the 90’s. I have never attempted anything this sculpting intense so please be gentle if you should leave any feedb](userimages/customs/7000/6553-1.jpg) Talpa Ronin Warriorsby Delta TI have been a fan of the Ronin Warriors series for the better part of 15 years now; in fact RW was what introduced me to Anime. I find it somewhat di...4 comments | ![[The Phantasm / Andrea Beaumont] “Joker, Your of angel death awaits!” I’ve been a huge fan of Batman Mask of the Phantasm since I was a kid. This is a quick and easy custom that will bring the Phantasm into her much deserved 1/12 scale. The Phantasm is a ML Psylocke from shoulders to toe. I had to decapitate her as the cowl would not fit with the head still attached. The sash was removed and the holes filled in. The boot cuffs and left glove are sculpted on and the cowl and scythe are from the original Kenner figure. Finally after a quick paintjob you have a Phantasm. She was easy and a lot of fun to do.
Hope you all like it.](userimages/customs/7000/6552-1.jpg) The Phantasm / Andrea Beaumont Batman Animatedby Delta T“Joker, Your of angel death awaits!” I’ve been a huge fan of Batman Mask of the Phantasm since I was a kid. This is a quick and easy...3 comments |
|