![[The Joker] This is my version of the Joker. When I first saw this figure at my local Comic store: R-Galaxy, I saw the Joker in there somewhere, this was before the Dark Knight had come out. As I saved up the money to buy the figure I went to see the Dark Knight, I used Heath Ledger's portrayal of the iconic character as inspiration for this figure. I used Apoxie to sculpt the scarred mouth after using a small drill bit and my Dremel to carve out the mouth line. I used Apoxie to redo the eye brows, fill in some of the wrinkles around the eyes and fix the nostrils a bit. I airbrushed the base skin color and the white, red and black face paint. I Finished up the details on the face with a brush and painted the hair with a brush(took me three trys to get it the way I wanted). I re-painted the straight jacket from its original grey to a more canvas look, re-painted the belts brown. The single strand of hair is bread tie wire. The last pics are work in progress.
+++++++++++++++++++++++++++++++++++++++](userimages/customs/13500/13230-1.jpg) The Joker | ![[Serena] This is a character from the same Independant comic book as Agent 42X. I used Apoxie to do the costume details on the biceps, thighs and collar. I also used apoxie to do the mask and some hair details. Made the sword and the sheath with sheet styrene. The last picture is work in progress.](userimages/customs/13500/13208-1.jpg) Serena Independent Comicsby customtoyzThis is a character from the same Independant comic book as Agent 42X. I used Apoxie to do the costume details on the biceps, thighs and collar. I als...6 comments |
![[Kodo Fett] Kodo Fett is my original creation He is from The Empire Strikes Back. Kodo Fett was a one time major rival of Boba Fett's but after being burned one too many times by Darth Vader and Jabba the Hutt, Kodo Fett left the Bounty Hunter trade for a life of solitude on Hoth. After learning of the rebel forces on Hoth and their secret base, Kodo pledges his alligence to the rebellion. With the help of Kodo Fett the rebels survive on this distant frozen planet, teaching them important skills acquired during his time on Hoth. A very important survival skill taught to Han Solo is responsible for the survival of Luke Skywalker. Kodo Fett aided the rebellion for many years, always remaining among the shadows, never staying in one place very long, he is rumored to have returned to Hoth for good.
I used a Galactic Marine as a base.
The front torso armor, jet pack, rifle and head from a Jodo Kast figure.
I glued the bib from the Glactic Marine head and smoothed it with Apoxie.
The shoulder armor, fo](userimages/customs/12500/12003-1.jpg) Kodo Fett Star Warsby customtoyzKodo Fett is my original creation He is from The Empire Strikes Back. Kodo Fett was a one time major rival of Boba Fett's but after being burned one t...1 comments | ![[Warfare] This figure started out as a Hulk Legends Doc Samson. I removed the green hair sculpted the mohawk. I sculpted the belt, holster, boot tops, arm bands, knife sheaths and torso details then painted him.](userimages/customs/12000/11815-1.jpg) Warfare Independent Comicsby customtoyzThis figure started out as a Hulk Legends Doc Samson. I removed the green hair sculpted the mohawk. I sculpted the belt, holster, boot tops, arm bands...1 comments |
![[Ken as Captain America] This figure is a commission done of a customers brother in law as Captain America. The bro in law's name is Ken. I used a Dr. Strange legends head to sculpt a likeness using Apoxie Sculpt, I used the head because it was the right scale and had a pretty generic face. I made the glasses from bread tie wire and the ear pieces from miniature store glasses; thanks to my wife for those. The last picture shows the customers bro in law.](userimages/customs/11500/11476-1.jpg) Ken as Captain America Marvel Legendsby customtoyzThis figure is a commission done of a customers brother in law as Captain America. The bro in law's name is Ken. I used a Dr. Strange legends head to ...2 comments | ![[Red Skull] This is an older figure or mine. I did about 2 years ago. This is the second one I did with the same body.
I used a Major Maxim body and hat with a Batman Black Mask head.(the earlier Figure had a Spawn Skull Splitter head.)The only thing I did to the body was paint the pants grey. I will try to take some better pics.](userimages/customs/11500/11020-1.jpg) Red Skull Marvel Selectby customtoyzThis is an older figure or mine. I did about 2 years ago. This is the second one I did with the same body.
I used a Major Maxim body and hat with a Ba...8 comments |
![[Darth Leia] Just something I did for fun, for myself. No elaborate back story just Leia as a Sith Lord. I used a Legacy Darth Vader with the removable helmet and a Leia head from the Boushh disguise figure. I cut out the part of the Anakin head with the wound and put it into the Leia head, smoothed it out with some Apoxie. Then a little pale flesh paint for the face and head, some white streaks in the hair. Duh Duh Duh DuhDuhDuh DuhDuhDuh!! Darth Leia!!](userimages/customs/11000/10904-1.jpg) Darth Leia Star Warsby customtoyzJust something I did for fun, for myself. No elaborate back story just Leia as a Sith Lord. I used a Legacy Darth Vader with the removable helmet and ...0 comments | ![[R-Galaxy] I made a mascot figure for my local comic shop R-Galaxy. I have been a customer there for about 12 years, the Owners Rick and Maritza have always been really cool, letting me showcase and sell my customs at their store. I used a Spider-man figure, shot it with some flat black paint and then hand painted the stars. I used a cape from a Medievel Spawn figure and built and painted the base.](userimages/customs/9500/9251-1.jpg) R-Galaxy Miscby customtoyzI made a mascot figure for my local comic shop R-Galaxy. I have been a customer there for about 12 years, the Owners Rick and Maritza have always been...8 comments |
![[Pat Billings] Hey its me! This a custom figure I made of myself after my wife saw the WWE figure at TRU one day. I used a McFarlane LOST Sawyer figure and a Mike Knox WWE head, I made a decal of the Punisher skull art on my home made t-shirt, a little paint and Apoxie Sculpt on the neck and presto! A mini me. Yes, the figure also has a wedding ring! The pictures were taken at an appearance at this years Free Comic Day at my local comic shop R-Galaxy.](userimages/customs/9500/9230-1.jpg) Pat Billings Miscby customtoyzHey its me! This a custom figure I made of myself after my wife saw the WWE figure at TRU one day. I used a McFarlane LOST Sawyer figure and a Mike Kn...14 comments | ![[Agent 42X] Agent 42X is my latest Commission. I used a Marvel Legends Astonishing X-men Cyclops for the Upper body and Thighs. I used The lower legs and feet from a Ultimate Wolverine also from the ML line. The head is from a DC Direct Superman, I believe it is based on Michael Turners art. A lot of sculpting for the arms, front and back upper body, legs and hair. The last two photos are WIP pics.](userimages/customs/9500/9211-1.jpg) Agent 42X Independent Comicsby customtoyzAgent 42X is my latest Commission. I used a Marvel Legends Astonishing X-men Cyclops for the Upper body and Thighs. I used The lower legs and feet fro...1 comments |
![[Shades] I used a Bleach "Chad" Sado figure for this original Character, He is Shades from the on line comic called Star Cross'd Destiny. I dremeled the shirt details and necklace, used Apoxie to make a tank top collar and close the bottom of the shirt. rebuilt shoulder sockets, used arms and coat from Toy Biz TWA wrestling figure. Sculpted hair and goatee using Apoxie. Tried to make his necklace, also from Apoxie. The last 3 pics are WIP and original art.](userimages/customs/8500/8240-1.jpg) Shades | ![[Teeni Weeni Stealth Iron Man] This is a small 2 1/4 inch Stealth Iron Man I painted for fun in between work, found him in a three pack along with Captain America and Punisher at a local store called Family Dollar. Used Tamayia silver and clear blue/red. Used a 6 1/2 inch Hulk from the first movie to give size reference.](userimages/customs/8500/8204-1.jpg) Teeni Weeni Stealth Iron Man Marvelby customtoyzThis is a small 2 1/4 inch Stealth Iron Man I painted for fun in between work, found him in a three pack along with Captain America and Punisher at a ...4 comments |
![[El Valiente] El Valiente is a piece for Ray Ramos of Adversary Comix. I Used a Marvel Legends Herules supplied by Ray for the upper torso, a X-men 3 Juggernaut for the lower torso and a Rey Mysterio head also supplied by Ray. Filled in around the mouth, eyes and the decorative details on the mask with sculpey. Filled in the wrist band's with sculpey. Used Apoxie to alter the boots, smoothing out the toes and the laces, also to build the belt. Used my airbrush to paint the upper torso,wanted a nice smooth finish with all that skin showing.](userimages/customs/8000/7910-1.jpg) El Valiente Independent Comicsby customtoyzEl Valiente is a piece for Ray Ramos of Adversary Comix. I Used a Marvel Legends Herules supplied by Ray for the upper torso, a X-men 3 Juggernaut for...4 comments | ![[Man Bat] A re-paint from a few years back, just never had any place to show it off. This came from the Batman LOTDK series, great figures-terrible color schemes. Hope you like my interpretation.](userimages/customs/7500/7405-1.jpg) Man Bat |
![[Anti-Batman SWAT Team member] This figure depicts the period of time early in Batman's career when Gotham P.D. was trying to capture their misunderstood vigilante.
A simple head swap and repaint. I used a McFarlane Military Figure for the head and weapon. Made the Batarang out of Sculpy and craft wire.](userimages/customs/7500/7404-1.jpg) Anti-Batman SWAT Team member D.C. Universeby customtoyzThis figure depicts the period of time early in Batman's career when Gotham P.D. was trying to capture their misunderstood vigilante.
A simple head sw...2 comments | ![[Medievel Batman] Used a Conan for the figure, a Spawn figure Skull Splitter for the helmet with a ears from a fast food toy. The gauntlets and hands are from a Spawn figure, can't remember the name. The Bat symbol and stitching are Elmers glue.The cape is from a Mysterio figure.The base is from the Marvel Select Elektra. The size of the figure includes the base.](userimages/customs/7500/7403-1.jpg) Medievel Batman D.C. Universeby customtoyzUsed a Conan for the figure, a Spawn figure Skull Splitter for the helmet with a ears from a fast food toy. The gauntlets and hands are from a Spawn f...5 comments |
![[Animated El Valiente] This is a animated version of El Valiente an independant comic put out by Ray Ramos. He has asked me to make a custom figure of his character; while I was looking through my collection of loose figures for some possible donor figures I came upon a animated Bane figure which serves as the base for this custom. I will begin soon on the actual custom Ray has asked for. I filled in the mask details with sculpey and after demeling off the existing belt buckle I sculpted El Valiente's buckle with sculpey.I remove the glove detail on his right wrist, then I created his wrist bands with sculpey, painted his signature costume on and presto a real fun custom. I did this for fun and because I don't do a lot of animated customs much anymore.](userimages/customs/7000/6858-1.jpg) Animated El Valiente Originalby customtoyzThis is a animated version of El Valiente an independant comic put out by Ray Ramos. He has asked me to make a custom figure of his character; while I...2 comments | ![[Thor] This is my Thor custom figure.The base figure is from the McFarlane Conan series. I took a helmet from another figure's accessories in the same series, then I took this figures hair off and attached the bottom of the hair to the helmet. The helmets wings are from the DC Direct Justice Flash's helmet. I took the material off from around the belt, put a water pouch on the belt. I used sculpey to make the disks on his chest and pelvis, shortend the hammer's handle and made a leather strap out of some ribbon from a Marvel Select Elektra. I glued craft wire on one side to make it posable. A little testors gloss on the disks, helmet and shin details to finish it off.](userimages/customs/7000/6856-1.jpg) Thor Marvel Selectby customtoyzThis is my Thor custom figure.The base figure is from the McFarlane Conan series. I took a helmet from another figure's accessories in the same series...4 comments |
![[Gabriel] I was asked to create this figure by Jimmy Portillo. He is Gabriel, a Vampire from the Graphic Novel of the same name, created by Jimmy. Gabriel stalks his victims on the border cities of El Paso, Texas and Juarez, Mexico. The last picture is of Jimmy and the custom for comparison, Jimmy portrays Gabriel in the Graphic novel.
Gabriel was created by using a Resident Evil 4, Leon S. Kennedy figure as the base. First I removed his shoulder and hip holsters. The straps on his right leg for the hip holster were removed with a Dremel and that part of the leg was resculpted with Sculpey. I removed the long bangs and resculpted the hair with sculpey. I replaced the hands with some from the captain Archer figure of the Art Asylum Enterprise line. I created decals for Gabriel's signature Night of the Living Dead shirt with reference photos proided by Jimmy. The decals were touched up with paint. I used wire from a bread tie to make the nose ring.](userimages/customs/7000/6855-1.jpg) Gabriel Independent Comicsby customtoyzI was asked to create this figure by Jimmy Portillo. He is Gabriel, a Vampire from the Graphic Novel of the same name, created by Jimmy. Gabriel stalk...7 comments | ![[Smallville Superman] Simple head swap, I found a loose Clark at Phoenix Comicon in 06. Then got the idea to make a custom of a figure every Smallville fan wants to see Tom Welling as Superman. The only customizing was matching paint for neck and hands to the head color.](userimages/customs/7000/6625-1.jpg) Smallville Superman DC Directby customtoyzSimple head swap, I found a loose Clark at Phoenix Comicon in 06. Then got the idea to make a custom of a figure every Smallville fan wants to see Tom...0 comments |
![[Batgirl] I removed the cape sanded down shoulder pieces, filled in cleavege with putty. Added ears from Fast food toy. Painted the classic blue/grey/yellow costume on figure. Weapon and hair from parts box. Last photo is base figure.](userimages/customs/7000/6624-1.jpg) Batgirl DC Directby customtoyzI removed the cape sanded down shoulder pieces, filled in cleavege with putty. Added ears from Fast food toy. Painted the classic blue/grey/yellow cos...5 comments | ![[Punisher] I did a fair amount of putty work to get the two torso halves together,used parts box weapons, holster and belt. I took head straight from Rising Stars Chandra figure and glued in on, no paint or alterations at all.](userimages/customs/7000/6623-1.jpg) Punisher Marvel Selectby customtoyzI did a fair amount of putty work to get the two torso halves together,used parts box weapons, holster and belt. I took head straight from Rising Star...3 comments |
![[Iron Punisher] This is a What If... Figure. What if Frank Castle became Iron Man.
I removed the weapons from the original figure, placed pieces from my parts box into the palms for the pulsor rays and gave him the classic black paint and white skull. Last picture shows the original figure.](userimages/customs/7000/6562-1.jpg) Iron Punisher Marvel Legendsby customtoyzThis is a What If... Figure. What if Frank Castle became Iron Man.
I removed the weapons from the original figure, placed pieces from my parts box int...4 comments | ![[Angel] I used wings from the Spawn redeemer and sculpted the belt buckle, I re-did the cuffs using putty. All in all a simple custom. I don't follow the x-universe so I created this figure not knowing if there was a female Angel already.](userimages/customs/7000/6561-1.jpg) Angel Marvel Selectby customtoyzI used wings from the Spawn redeemer and sculpted the belt buckle, I re-did the cuffs using putty. All in all a simple custom. I don't follow the x-un...5 comments |
|