![[Hades - 4 Pwnies of Apocalypse] This is the Hades Pwnies I didn't finish in time for the Four Horsemen Custom Contest.
Full body paint job with citadel paints, re-rooted her tail hair.
This is also kinda biblically based, in one interpretation, apparently hades is that place everyone used to go to when they died before Christ died. There's Paradise, or Abraham's Bossom, where the good people who believed in the hewbrew God went. There is the other half Tartarus, where everyone else and the sinners go, for torment and stuff. Seperating these two sides is a great uncrossable chasm. In one story abraham is talking to a dude on the other side about where they are and why, so for some reason you could talk to the other side. Probably very figurative.
So, on my pwnie, I made half of her "Paradise" with a flowing river of water that rushes to her feet and free sky (yellow parts) and green grasses. There is a cliff, the higher ground is her head and the river has a water fall there. The blue hair falls on that s](userimages/customs/18500/18271-1.jpg) Hades - 4 Pwnies of Apocalypse Originalby cookiinThis is the Hades Pwnies I didn't finish in time for the Four Horsemen Custom Contest.
Full body paint job with citadel paints, re-rooted her tail ha...0 comments | ![[King] King, leader of the Royal Flush Gang from Batman Beyond...yet again...Shinier and Better!
Body - Killer Moth
Head - Dr. Impossible
Sword - Spiral
Flying Ace Card Mount - 1/5 deck of cards super glued together
Exploding Skull Card - Sculpey
Sculpted his crown, skirt, shoulder ring thingy, gauntlet cuffs, and exploding skull card.
Citadel painted everything..used real gold this time instead of golden yellow color for crown/gauntlet cuffs/belt/sword hilt/facial hair (which is FAKE BTW..since when he's not in his costume, he has GREY HAIR).
I do believe I improved on these points: Gaunlets (last time I made them gloves..dunno why), Crown, face paint. Any better?](userimages/customs/18500/18268-1.jpg) King Batman Beyondby cookiinKing, leader of the Royal Flush Gang from Batman Beyond...yet again...Shinier and Better!
Body - Killer Moth
Head - Dr. Impossible
Sword - Spiral
Fly...1 comments |
![[2-D Man] This is 2-D Man, rip-off of Mr. Fantastic. He is leader of the Terrific Trio, a team of scientists accidentally exposed to high levels of radiation during a particle fusion experiment causing their DNA to undergo dramatic genetic changes. He is the oldest of the group, and is now completely flat, hence the name "2-D". He can stretch his body to amazing lengths and even stretch himself out like a trampoline. He never "reverts" to his original form, so he is always abnormally tall and flat.
This took me about 2 days to make; I used "bendy" sculpey and the wire ties that come in the action figure boxes. I only painted on his facial features, hair, and chest "Terrific Trio" symbol. I also included an action figure sized action figure of 2-D Man made completely out of bendy sculpey, just like in the Batman Beyond t.v. show. I drilled holes in his backside all over his body but it still doesn't quite stay posed. He curves well, but does not take shar](userimages/customs/18500/18190-1.jpg) 2-D Man Batman Beyondby cookiinThis is 2-D Man, rip-off of Mr. Fantastic. He is leader of the Terrific Trio, a team of scientists accidentally exposed to high levels of radiation du...3 comments | ![[Dragon Quest's King Metal Slime] The core is a metal Star Wars Storm Trooper helmet stuffed with tissues and covered with a layer of sculpey. Then I added two more layers of sculpey to round it out with the top layer being the metallic sculpey. Crown is pure sculpey, the golden parts were yellow sculpey. As a precaution I covered all seams with superglue. Painted on face and crown with Citadel. Covered entire thing with 'Ardcoat.
I sell little slime earrings, and some customer wanted a pair along with some non-earring slimes so I happily obliged. ^_^](userimages/customs/18500/18042-1.jpg) Dragon Quest's King Metal Slime Originalby cookiinThe core is a metal Star Wars Storm Trooper helmet stuffed with tissues and covered with a layer of sculpey. Then I added two more layers of sculpey t...1 comments |
![[Payback] Full-body paint job with citadel, swapped heads with killer moth, stole captain cold's shoulder shawl and cut it up some more, stole mace windu's (blue?! Why blue!?) Light saber, dremmeled down his arms, the shawl (or whatever it's called when a dude wears it, lol) and the head, and apoxied his chest details. If you pop his head off the shawl is removable and reveals the robot's computer controls on his chest. Or, you can just lift/bend it back and take a peek..It's easier.
I was going to go for the even better coolness of having a complete shawl that wraps around his head and is removable, but since I don't have any action-figure sized child's head I had to just go for the outside look of payback. However, it may be a reality in the (kinda distant) future!
The action shot with the deadpool van is a reference to a scene in the payback episode where payback is trying to kill random guy (played by robin) as revenge for random girl (played by x-23) by cutting through the roof of the van](userimages/customs/18000/17937-1.jpg) Payback Batman Beyondby cookiinFull-body paint job with citadel, swapped heads with killer moth, stole captain cold's shoulder shawl and cut it up some more, stole mace windu's (blu...2 comments | ![[Scarlet Witch] Felt, foam, glue.
RRRRREEEEDDDDD
Oh yes, red citadel for her hands/earrings.](userimages/customs/18000/17852-1.jpg) Scarlet Witch |
![[Polaris] Full-body paint job with Citadel paints!
Again, wings=cape/flying ability!](userimages/customs/18000/17822-1.jpg) Polaris | ![[Ten] I did Ten again! This time as a My Lil' Pwnie!
Washed/scrubbed/hair pulled out
Full-body paint job with citadel, hand-painted the spades and "10" cutie-marks. Head is articulate (can rotate in place). Took a picture of the reflection (3rd pic w/ Batman Beyond) so you could see her big pearly whites as she smiles!
In the second pic, I rotated her head toward camera so you can see her face. When in its usual spot, however, the costume seam between the white and black sides is continuous from head to butt and around the underside and back up her face without breaking.
Yeah! I may or may not make the rest of the gang.](userimages/customs/18000/17593-1.jpg) Ten Batman Beyondby cookiinI did Ten again! This time as a My Lil' Pwnie!
Washed/scrubbed/hair pulled out
Full-body paint job with citadel, hand-painted the spades and "10...1 comments |
![[Phoenix] I found this hasbro birdy toy mixed in with my MLP lot; it has lovely brushable hair which I did wash/condition/untangle, and then braid/curl. I sanded off the palm tree on its chest and apoxied the chest piece and belt buckle. Simple paint job (black gold green orange) with citadel paints, and glued on a nice yellow ribbon. The feet can snap open and closed to hold itself upright, or hang upside down! It is also part of the "My Lil' Pwnies" line of customs.](userimages/customs/17500/17475-1.jpg) Phoenix Originalby cookiinI found this hasbro birdy toy mixed in with my MLP lot; it has lovely brushable hair which I did wash/condition/untangle, and then braid/curl. I sande...2 comments | ![[My Lil' Horsemen] The newest additions to my "My Lil' Pwnies" line of customs. I tried to base these figures from biblical scriptures (read and re-read Revelations, Zechariah, and some other choice passages), but that made for some pretty plain figures, so I ended up adding my own artist's interpretation.
I also tried to stay true to the "My Little Pony" scheme of butt-pics, and that proved to be easier.
Except for Death, they all have their original MLP hair which I washed and conditioned.
Painted with citadel paints.
"Anti-Christ"/"Holy Spirit"/[other] (depends on interpretation)
White Pwnie
"I looked, and there before me was a white horse! Its rider held a bow, and he was given a crown, and he rode out as a conquerer bent on conquest."
Full-body white paint job, has a bow (but no arrow) as its "cutie mark", and painted the horn golden (to symbolize the crown).
"War"
Red Pwnie
"Then another horse came out, a fiery red one. It](userimages/customs/17500/17472-1.jpg) My Lil' Horsemen Originalby cookiinThe newest additions to my "My Lil' Pwnies" line of customs. I tried to base these figures from biblical scriptures (read and re-read Revela...2 comments |
![[She-Hulk] I used a Gusty G1 My little pony and kept the original MLP hair. MLP Unicorns always come with a different colored streak of hair, hence the hot pink streak in She-Hulk. The MLPs I use in these customs are used and played with, so I have given them a full bath, shampoo and condition and brush and curl their hair, and scrub them inside and out! No rust/mold problems!
Simple full-body paint job, including eyes.](userimages/customs/17500/17270-1.jpg) She-Hulk Originalby cookiinI used a Gusty G1 My little pony and kept the original MLP hair. MLP Unicorns always come with a different colored streak of hair, hence the hot pink ...1 comments | ![[Stormy] Stormy, my next custom in my new line of "My Lil' Pwnies". Got a HUGE lot of used and played with MLPs and fakies so I picked one that wasn't going for a lot online. Washed it and shampooed and conditioned her hair and got it silky smooth again. Straight up Paint job with GW Citadel paints. Tried to sharpie in her eye lashes, but got frustrated and just painted it on with GW. Looks like she's got a mohawk fron certain angles! I took the liberty of giving her gold eye shadow. For those who don't get it..her wings are the cape...get it? Great!](userimages/customs/17500/17202-1.jpg) Stormy Originalby cookiinStormy, my next custom in my new line of "My Lil' Pwnies". Got a HUGE lot of used and played with MLPs and fakies so I picked one that wasn'...1 comments |
![[Spider-Pwnie] Spider-Pwnie, the first in what I hope is a long line of "pony-type heroes that don't really make sense but loook it looks like my fav super hero!!"
Basically base painted in blue and red acrylic paints, sharpied in some spider lines, painted in the spider symbol on her chest and her eyes with GW citadel, apoxied eye patches, pulled out all her pink hair and replaced it with white curly hair. Freakin' bent my crochet needle!! >O!!](userimages/customs/17500/17123-1.jpg) Spider-Pwnie Originalby cookiinSpider-Pwnie, the first in what I hope is a long line of "pony-type heroes that don't really make sense but loook it looks like my fav super hero...1 comments | ![[Curaré] Curaré, for those who don't know, is the top assassin from the League of Assassins in Batman Beyond, contracted to kill D.A. Sam Young (Commissioner Gordan's husband). She fails, and therefore must be killed as punishment. But she's too cool for that and ends up taking out the rest of the League of Assassins herself.
I painted her blue. Got a random sword. Cut up a White Queen cape for use as Curaré's front skirt and cape. Sculpted her boobs and golden medallions with apoxie. Constructed the back half of her skirt with flexbile sculpey so her legs are not completely restricted. Used some more Flexible sculpey to make her mask; the parts that are not directly attached to her face are flexible.
If I were to make her again, I would totally take more time with her mask and give it the proper wrinkles and shape, and make the black lines on her arms and legs grey (since they aren't a pattern but rather, she wrapped white cloth on her limbs).](userimages/customs/16500/16377-1.jpg) Curaré Batman Beyondby cookiinCuraré, for those who don't know, is the top assassin from the League of Assassins in Batman Beyond, contracted to kill D.A. Sam Young (Commiss...1 comments |
![[Inque BAF] I call it Inque Build-A-Figure because the arms and legs swivel, can be taken off, and then re-attached repeatedly.
I made this figure completely from scratch, I started with some crumpled aluminum cause I didn't want to waste so much apoxie (I tried making a pure sculpey figure before but it took too much sculpey) and covered it with apoxie for the main body and legs/arms. I stole some head off a 5" figure and covered it with apoxie and gave it that oval shape (again, trying to save apoxie, not trying to use the head as a base or anything). I found some weird metal cylinder things so I stuck some sculpey on both sides and baked it, stuck those on the ends of the body and legs/arm for use as joints/connecting points. They fit very snug, I can pull out an arm and then put it back together again without any problems. I shaped and sanded her to give her a nice butt + rack (lol). I painted her with Citadel paints and inks.
The only difficulty is in trying to make her stand. She DOE](userimages/customs/14500/14336-1.jpg) Inque BAF Batman Beyondby cookiinI call it Inque Build-A-Figure because the arms and legs swivel, can be taken off, and then re-attached repeatedly.
I made this figure completely fro...1 comments | ![[Jack] I cut off some of his front hairs, and sanded down his left gauntlet. I added in with sculpey his crown, right gauntlet, and the piece that covers his chest/shoulders/back. That shoudler piece does have a tendancy to break since I only used sculpey for it, but this was right before I got my first pot of Apoxie and it looks good if you don't try to raise his arms too much. I crocheted a black sash around his waist (for those that don't know, its like knitting but with only one, curved needle) and glued it in place. I painted it all with Citadel paints. I did try to make him kneel but it just looks all awkward; figures weren't meant for kneeling nicely, I guess.](userimages/customs/14500/14328-1.jpg) Jack Batman Beyondby cookiinI cut off some of his front hairs, and sanded down his left gauntlet. I added in with sculpey his crown, right gauntlet, and the piece that covers his...1 comments |
![[Ace] Some of the pictures are outdated, I updated the Spade on his chest to look more like the one on the playing cards. I sanded down the head and face, filled up the gap in his back with sculpey, and painted the spade on his back free-hand. Everything painted with Citadel Paints. The "flying" card mount was made by super-gluing a fifth of the whole deck together with the Ace of Spades on top. He really can hold up the two figures over his head on the card (like in the picture) by himself, the tricky part was getting Queen to stay standing (propped her on King).](userimages/customs/14500/14320-1.jpg) Ace Batman Beyondby cookiinSome of the pictures are outdated, I updated the Spade on his chest to look more like the one on the playing cards. I sanded down the head and face, f...1 comments | ![[Ten] I cut off her hat and sanded it nice and round; sanded her face, wrists, and ankles. Painted with Citadel Paints. Her "flying" Card mount was made by super-gluing a fifth of the card deck together with the Ten of Spades on top.](userimages/customs/14500/14317-1.jpg) Ten Batman Beyondby cookiinI cut off her hat and sanded it nice and round; sanded her face, wrists, and ankles. Painted with Citadel Paints. Her "flying" Card mount w...1 comments |
![[Queen] I apoxied her head and shoudlers, and sanded her chest and legs. Her red sash was made with ribbon, and her Sceptre was made with a Matrix bullet as a base and I sanded/apoxied the rest. Her diamond is a random thing I found, and her "flying" Card mount was made by super-gluing a fifth of the whole card deck together with the Queen of Spades on top. Everything painted with Citadel Paints.](userimages/customs/14500/14316-1.jpg) Queen Batman Beyondby cookiinI apoxied her head and shoudlers, and sanded her chest and legs. Her red sash was made with ribbon, and her Sceptre was made with a Matrix bullet as a...0 comments | ![[King] For this figure I used Mr. Miracle's head on Killer Moth's Body. The sword is from the Spiral figure; I repainted it. The "exploding" Death Card I made out of sculpey and painted. The "flying" card mount was made simply by super-glueing a fifth of the whole card deck together with the King of Spades on top. I cut out his skirt thingies from someone's cape, and made his belt addition, crown, and shoulder thing with apoxie. Everything was painted with Citadel paints.](userimages/customs/14500/14313-1.jpg) King Batman Beyondby cookiinFor this figure I used Mr. Miracle's head on Killer Moth's Body. The sword is from the Spiral figure; I repainted it. The "exploding" Death ...3 comments |
![[Ile] Bio: Ile is the youngest of the three ~*eViL sIsTeRs*~ as they call themselves, she's the Captain of Mr. Roundyhead. She sure likes fire.
What I did: I made her choker, hair, and wand out of Sculpey III. I cut out pieces of someone's cape and glued them back together to make her skirt. I painted all of it with the crappy acrylics paints. I cut off X-23's hand blades but I left the foot blades on cause they're cool. Again, after tiring experience when making "Cookiin" I refused to do any more hand-sanding, so I instead gave "Ile" some fiery colored ribbons for her arms and legs with little red bows.](userimages/customs/14000/13594-1.jpg) Ile Originalby cookiinBio: Ile is the youngest of the three ~*eViL sIsTeRs*~ as they call themselves, she's the Captain of Mr. Roundyhead. She sure likes fire.
What I did:...7 comments | ![[Tulae] Bio: This is Cookiin's older sister, her position on the ship is "Toilet cleaner". Not sure if Mr. Roundyhead ( it's kinda like a Borg Sphere ship only with two, sometimes three, rings of WINDOWS. That's right folks, windows!) has a toilet though..if need be. She is also the Emperor of the Universe.
What I did: She is seen here in her regular uniform (white or rainbow-striped socks, blue tank with distictive design although it does usually show some midriff, and comfortable pants with a cord), 100 calorie Diet Pepsi (usually is the normal sized REGULAR Pepsi but I thought it was time to get with the times and YES I'm aware it's not real), and a slice of anchovy pizza.
I made the hair, soda, and pizza slice out of Sculpey III. I'm not sure but I think I cut the pant leg bottems out of sumthing and glued 'em on because they are too flexible to be more sculpey. Painted everything with the crappy acrylic paints. Her arm thingy came from Elektra's bandana.](userimages/customs/14000/13593-1.jpg) Tulae Originalby cookiinBio: This is Cookiin's older sister, her position on the ship is "Toilet cleaner". Not sure if Mr. Roundyhead ( it's kinda like a Borg Spher...0 comments |
![[Cookiin V.1] What I did: This was my first custom EVER. I made her hair, necklace, boots (the feet area), the belts on her boots, and skirt, sword, and "Nemesis cube" (which is actually a miniature Borg Ship that shoots out purple lightning) with Sculpey III. I painted it all with the regular crappy craft-store acrylic paint and also a bit of nail polish. She was originally supposed to be wearing her "transformed" uniform (which is basically a rip from the Sailor Moon Sailor Scouts uniform which are a rip from school-girl sailor suits) because of the things on her shoulders from Storm's outfit but I decided against it and now she's wearing her regular uniform. I just left the shoulder thingies anyway along with some sleeves, which "Cookiin" never actually wore before, because she DID need more purple. Also, I seriously didn't feel like getting carpal tunnel from hand-sanding both her arms entirely, so it worked. I DID, however, hand-sand her thighs so the boots would b](userimages/customs/14000/13592-1.jpg) Cookiin V.1 Originalby cookiinWhat I did: This was my first custom EVER. I made her hair, necklace, boots (the feet area), the belts on her boots, and skirt, sword, and "Nemes...5 comments | |
|