![[Spike] Spike is my finale Mercinary/Villian in my Ultimate Heroes Inc, being a Russian villain. series. Spike is Super Strength & Ultra Dense skin to near Invulnerable, as well as Kinetic absorption to boost his strength & stamina during a fight. Unlike my other Mercinary's, Spike is a National Hero known as "ïðåäîõðàíèòåëü" (Protector)in Russia...with a different uniform.
This figure I originally did as U.S. Agent, but decided to repaint & fix up as Spike. Any thoughts?](userimages/customs/38000/37676-1.jpg) Spike My Heroesby CapSoldierSpike is my finale Mercinary/Villian in my Ultimate Heroes Inc, being a Russian villain. series. Spike is Super Strength & Ultra Dense skin to nea...2 comments | ![[Disintegration] Disintegration is the 3rd of my Darkfire Arch-Enemys. The character was a thief hired to steal a prototype Disintegration weapon. Darkfire arrived in time to stop the robbery, but as he was new to his powers...he accidently fried the thief's arm off, leaving only a charred hand. With Darkfire stunned at what had happened, the thief's partners got him & the weapon to a hiding spot. Disintegration went mad & killed his partners. After having the weapon grafted to his arm stub, he now hunts to face Darkfire again. His charred hand hangs from his belt, to one day shove down Darkfire's throat!
The figure is a Duke Nukem body with the Vampire head from a Lost Boys figure & a Bats cape. Lots of repaint & some spare parts later...& he is complete. Any thoughts?](userimages/customs/38000/37590-1.jpg) Disintegration My Heroesby CapSoldierDisintegration is the 3rd of my Darkfire Arch-Enemys. The character was a thief hired to steal a prototype Disintegration weapon. Darkfire arrived in ...2 comments |
![[Black Jack] Black Jack is another of my Mercinary Villians created to fight Darkfire & his group Ultimate Heroes Inc.(Ice Star & Commander Freedom figures are from this group). Black Jack was a test pilot who went rouge when he was flying this prototype Armored suit & flying disc platform. While evading the military he crashed in the ocean, as the sea water fused the chest plate to his body thru the cyberntic relays. The melding also gave him an Explosive touch & bolts.
The figure is a WWE Edge with a massive repaint, & peicing together equipment. Amazingly...this & Stinkbug match my original sketches pretty close. Any thoughts?](userimages/customs/38000/37558-1.jpg) Black Jack My Heroesby CapSoldierBlack Jack is another of my Mercinary Villians created to fight Darkfire & his group Ultimate Heroes Inc.(Ice Star & Commander Freedom figures...1 comments | ![[Commandant Stink Bug] Stink Bug is one of my Mercinary Villiance I created on paper to battle my anti hero Darkfire (check out figure), but now got him done in figure form. He has a Nuclear "Stench" power from trudging through nuclear sludge in a sewer system. The outfit is a containment suit to help control it, though he still reeks! Beware ye of super senses!!!
The figure is the Ross JSA Starman with a Duke Nukem head & Cigar. Any thoughts?](userimages/customs/38000/37557-1.jpg) Commandant Stink Bug My Heroesby CapSoldierStink Bug is one of my Mercinary Villiance I created on paper to battle my anti hero Darkfire (check out figure), but now got him done in figure form....2 comments |
![[Ultron] After doing Collosus, I decided to do Ultron, also after seeing the one Diamond Select will be releasing. My brother had several Destroyed Ulton set pieces from a figure he had bought, which is what I used on the forementioned figure. Anyway...after cutting & glueing what I could from the spare parts, I used some Dooms armored arms & legs. A whole lotta painting later...& UTRON Livesssss!!!!! Any thoughts?](userimages/customs/37000/36719-1.jpg) Ultron Avengersby CapSoldierAfter doing Collosus, I decided to do Ultron, also after seeing the one Diamond Select will be releasing. My brother had several Destroyed Ulton set p...4 comments | ![[Black Knight V2] I have finally completed my Black Knights Helmet!! I went with a more armored thickness as the central base was a LOTR Witchking helmet piece. I also added the Armored shoulder Paldrons, which is the comic look I like more. Also re did the belt to the multi belt look with Scabbard pulled more forward & short sword added. Looks more Battle ready!! Any thoughts?](userimages/customs/36500/36355-1.jpg) Black Knight V2 Avengersby CapSoldierI have finally completed my Black Knights Helmet!! I went with a more armored thickness as the central base was a LOTR Witchking helmet piece. I also ...3 comments |
![[Colossus] I decided to make my own Colossus as the new Diamond Select figure thats coming out looks really good, but I like the new Bald Colossus look. I used my Black Adam figure to re-do him. Added the decimated Ultron head & torso to add to Colossus power! any thoughts?](userimages/customs/36500/36323-1.jpg) Colossus X-Menby CapSoldierI decided to make my own Colossus as the new Diamond Select figure thats coming out looks really good, but I like the new Bald Colossus look. I used m...6 comments | ![[Damage] My Bro has been working on a JSA team & loves this character. I provided an Alex Ross pic with it. The base figure is a WWE bald wrestler (pretty generic), that had some cutting down his nose & ears for the mask. Used some clippings from his Dr. Fate figure( also one I did for him...check him out) energy Ankh for Damages Powered up fists. Was pretty simple, but turned out pretty good I think. Any thoughts?](userimages/customs/36500/36097-1.jpg) Damage DC Universeby CapSoldierMy Bro has been working on a JSA team & loves this character. I provided an Alex Ross pic with it. The base figure is a WWE bald wrestler (pretty ...9 comments |
![[Hawkeye (Movie/Ultimates)] Time for my 22nd Avenger! I decided to do the Movie/Ultimates Hawkeye. I used A WWE Randy Orton, & started building with Spare parts galore!! So glad I kept some LOTR Arrows from previous figures to build his Quiver around. The Bow shaft is from a LOTR sheild hand base, & then strung with thread. Had a hell of a time getting his Sheild badge to look right. Also transplanted hair in sections from another figure. Painted the hair with a brown underbase with blond highlights to give credit to both movie & comic versions. Any thoughts?](userimages/customs/36000/35723-1.jpg) Hawkeye (Movie/Ultimates) Avengersby CapSoldierTime for my 22nd Avenger! I decided to do the Movie/Ultimates Hawkeye. I used A WWE Randy Orton, & started building with Spare parts galore!! So g...1 comments | ![[Ant Man (Ultimates)] Last Year just after Christmas, I recieved a Captain America Tree Ornament. The art on it was o.k., but the Muscles & Molding was great. I had to use it with my Avengers figures, but who. Since I already have YellowJacket, & a Miniature Wasp...the only other choice was Ant Man. I have never been a fan of the original outfit, so i combined elements from the Scott Lang uniform, an original Deviation I found on Deviant Art & armor padded him up. Also added some Wrist blasters. Any thoughts?](userimages/customs/35500/35475-1.jpg) Ant Man (Ultimates) Avengersby CapSoldierLast Year just after Christmas, I recieved a Captain America Tree Ornament. The art on it was o.k., but the Muscles & Molding was great. I had to ...4 comments |
![[Citizen Steel] My Bro approached me with a Batman figure (don't know any particulars of figure} & asked me to turn him into Citizen Steel. He had been waiting for the Ross JSA series to make one...but has given up hope on that. I yanked the Cloak off & shaved off the Bat ears & glove spikes (keeping one for the head fin). Then I cut the Boot points off & did a massive repaint. Turned out better than I thought it would. Any Thoughts?](userimages/customs/35000/34504-1.jpg) Citizen Steel DC Superheroesby CapSoldierMy Bro approached me with a Batman figure (don't know any particulars of figure} & asked me to turn him into Citizen Steel. He had been waiting fo...4 comments | ![[Yellowjacket] Time for Another Avenger for my collection! I have always loved YellowJacket's outfit, so here he is. I used BlackHand due to his enraged mouth, great sculpted details..& again a stripped down body-form with decent muscles. The uniforms primary molding I kept as it gives a "ultimates" look to him, & just adapted the original costume to this. I also added the pouches as they showed when he was just Hank Pym with the shrunk down equipment in his pockets. I think the Disruptor Stinger blast from his Left had worked pretty well. Any thoughts?](userimages/customs/34500/34478-1.jpg) Yellowjacket Avengersby CapSoldierTime for Another Avenger for my collection! I have always loved YellowJacket's outfit, so here he is. I used BlackHand due to his enraged mouth, great...3 comments |
![[Bucky (Movie Version)] I decided since it's been a little while since the movie figures have been out, that a Bucky figure won't be made...so I did. I bought the Lost Boys figure for the basic build, cloths & coat. I used a DC Justice Society alternate Starman head as the Hair was right & shaved the beard off. Built the tunic from cutting the coat up. Built the Boot Spats & used a leather strip for his shoulder belt. Then a whole lotta repainting, the Tunic is actually a dark Navy Blue but due to the cloud cover outside changing my shading...it's a little off. Shoulder insignia was done in 1 try, darn happy with that! Any thoughts? Long live Winter Soldier!!](userimages/customs/34500/34305-1.jpg) Bucky (Movie Version) Captain Americaby CapSoldierI decided since it's been a little while since the movie figures have been out, that a Bucky figure won't be made...so I did. I bought the Lost Boys f...3 comments | ![[Union Jack (Joey Chapman)] I already have a Union Jack that is 6" scale, but since 90% of my figures are 7" scale, I decided to make one. To avoid argument that took place on my last UJ, my choice of the Black Uniform...in Captain America Red Menace Ultimate Collection,as Cap & UJ are sneaking in the dark...Cap asks if he is up to more "Skulking". Union Jack responds " Why else do you think I where the Black Suit?" I took the belt from my 6" figure & used it after a massive repaint (Black overlay with painstaking torso flag). The Silver dagger hilt was undersized, so I used a Capt. Jack Sparrow Sword Hilt that I cut down. Rubberbands are the straps. I also chose not to file down the Gauntlet & Boot edges from Starman, & leather glossed them as I like that look better than tights fottie looks. The left hand with the gesturing pose I placed on the Dagger sheath as to look like he is about to slide it up & pull the Dagger. I'm happy with the outcome. Any t](userimages/customs/34500/34156-1.jpg) Union Jack (Joey Chapman) Invadersby CapSoldierI already have a Union Jack that is 6" scale, but since 90% of my figures are 7" scale, I decided to make one. To avoid argument that took p...3 comments |
![[The Sheild] My brothers loves this character "The Sheild", so I agreed to do him. Originaly a Archie & Pep comics chacter, DC has picked him & his team the Mighty Crusaders up & has been shown in the Justice Society comic. This figure had originaly been a Superman that I made into Shazam (see figure in my customs). After stripping him to a base bodyform again, I just did a total repaint on him. Did make his raised gauntlet bands & molded the hair. So...any thoughts?](userimages/customs/34000/33551-1.jpg) The Sheild DC Universeby CapSoldierMy brothers loves this character "The Sheild", so I agreed to do him. Originaly a Archie & Pep comics chacter, DC has picked him & h...3 comments | ![[Ironfist] Ive always like Ironfist but never cared for his outfit. Then when they released the White & Gold...thats Cool, so I had to do one. I used the upper 1/2 of WWE Shawn Micheals & a bottom of Dr. Manhattan. The hands were very rubbery & Way Oversized, so I chopped em off & replace with spares I had. Front of sash is ML Dr. Strange & used cloth for rest if sash. Used Rubberband for mask ties. Hey, he's a member of the New Avengers!!! Thoughts?](userimages/customs/33500/33242-1.jpg) Ironfist Avengersby CapSoldierIve always like Ironfist but never cared for his outfit. Then when they released the White & Gold...thats Cool, so I had to do one. I used the upp...4 comments |
![[Dr. Strange ( New Defenders Outfit)] After seeing the New Defenders artwork just released last week or so, I had to repaint my Dr. Strange. I love the Black & Red look anyway, and love that he isn't dependant on the Cloak & Eye of Agamotto any more. So...whatcha think?](userimages/customs/33500/33134-1.jpg) Dr. Strange ( New Defenders Outfit) Avengersby CapSoldierAfter seeing the New Defenders artwork just released last week or so, I had to repaint my Dr. Strange. I love the Black & Red look anyway, and lov...2 comments | ![[Captain Britain (70's Outfit)] I LOVE the 70's original Captain Britain outfit! I used the Marvel's Captain Marvel primarily for the perfect hair, muscle build & already a stripped down bodysuit. After researching a couple of different color variations, I decided to keep him to the original basics. Made the bottom mask, Staff & Amulet...then just a total repaint. You just have to love the 70's flair of his outfit. Any thoughts?](userimages/customs/33500/33105-1.jpg) Captain Britain (70's Outfit) Avengersby CapSoldierI LOVE the 70's original Captain Britain outfit! I used the Marvel's Captain Marvel primarily for the perfect hair, muscle build & already a strip...8 comments |
![[Lionheart] I've liked this outfit for a while now. It shows some of the original Capt. Britain flair with an original twist. I decided to do her with the mask pulled down showing her battle scar with attitude, along with cool sunglasses. Also chose with her hair up & in a ponytail. The Design on her weapon I decided to do just on top as I have always thought that with it on both ends would screw with the ballance of using it like a sword. Anyway her she is ... also another Avenger!! Any thoughts?](userimages/customs/33500/33104-1.jpg) Lionheart Avengersby CapSoldierI've liked this outfit for a while now. It shows some of the original Capt. Britain flair with an original twist. I decided to do her with the mask pu...5 comments | ![[Captain Britain] Alright, listing Captain Britain as an Avenger may be a stretch...but he is listed as a reserve Avenger, that sort of counts. Anyway, I have always thought he was cool. He has always had an awesome look & he is Powerful! I chose my favorite Uniform & put the Helmet that I prefer. The utility belt look is from the Captain America new toy line's addition. I thought about adding the Excalibur Sword, but decided to just concentrate on the Power of CAPTAIN BRITAINnnnnnn....... Any thoughts?](userimages/customs/32500/32485-1.jpg) Captain Britain Avengersby CapSoldierAlright, listing Captain Britain as an Avenger may be a stretch...but he is listed as a reserve Avenger, that sort of counts. Anyway, I have always th...0 comments |
![[Dr. Strange] I recently aquired a ML Dr. Strange cloak from my nefew. Looking at my Jay Garrick Flash that had worked his way to the background of my shelves, I decided he had the base to make into Strange. I added material to the bottom of the shirt to make thr Tunic. After painting it blue, I painted the tunic design, Black washed the paints & boots ( yes in my version he wears boots...who would run around in footie tights?) & created the sash. Repainted the head as needed ( choosing the Gotee instead of the mustache version ) & painted in the cloak details. I was happy to find Strange as a member of the New Avengers...so yet another Avenger!!! Any thoughts?](userimages/customs/32000/31990-1.jpg) Dr. Strange Avengersby CapSoldierI recently aquired a ML Dr. Strange cloak from my nefew. Looking at my Jay Garrick Flash that had worked his way to the background of my shelves, I de...4 comments | ![[Black Panther] More Avengers!!!!!! This time I used a hard sculpted Spiderman that comes as a back drop that hangs in the window with Diamond Selects Black Cat figure. I cut the head off first, then shaved the neck back...allowing to glue the head back a little in more of a Prowel look. Then black washed him. Added dulled black gloves & a Marvel Legends Black Panther Cloak. I Like how this turned out. Any Thoughts?](userimages/customs/32000/31751-1.jpg) Black Panther Avengersby CapSoldierMore Avengers!!!!!! This time I used a hard sculpted Spiderman that comes as a back drop that hangs in the window with Diamond Selects Black Cat figur...3 comments |
![[Ms Marvel] Well, it's time to beef up my Avengers again. This time I used a Watchmen's Silk Specter as the base. Took several random cut off sections of hair to beef up the bases straight hair as well as cutting away some of Specter's original hair for the look. Razored away some layers of clothing edges, & added a Red Silk scrap for the sash. Then a all out repaint & she is done. Any thoughts?](userimages/customs/32000/31748-1.jpg) Ms Marvel Avengersby CapSoldierWell, it's time to beef up my Avengers again. This time I used a Watchmen's Silk Specter as the base. Took several random cut off sections of hair to ...1 comments | ![[Commander Freedom (New)] I had previously did a version of this hero, but wasn't satisfied as the head was to big & the figure was to bubble muscled. Now going with a WWE HHH figure, this is what I envisioned for my Patriotic Hero. I had to have my Bro sand down his hair while I worked on one of his figures. I think his Sword of Valour turned out well. This hero has a Hypnotic/Charm voice. Also on his back is a pop up triage tent as this guy is a trained paramedic with Surgeon skills. Any thoughts of this Sentinel of Liberty?](userimages/customs/31000/30502-1.jpg) Commander Freedom (New) My Heroesby CapSoldierI had previously did a version of this hero, but wasn't satisfied as the head was to big & the figure was to bubble muscled. Now going with a WWE ...2 comments |
![[Scarlet Witch] My latest Avenger is The Scarlet Witch. I started with a WWE Malina figure. This one was a lot of work. The base figure had massive thunder thighs & a weird look on her face. I cut some of her hair away & glued it back re-arranged after applying her Cloak & shoulder pieces I made. The silk worked well for covering unwanted area, while still looking more natural. I was pleasantly surprised with the finished product. Any thoughts?](userimages/customs/30500/30021-1.jpg) Scarlet Witch Avengersby CapSoldierMy latest Avenger is The Scarlet Witch. I started with a WWE Malina figure. This one was a lot of work. The base figure had massive thunder thighs &am...2 comments | ![[Black Knight (Dane)] Here is my latest Avenger, Dane Whitman The Black Knight!! Once again I did a blend of my favorite versions of his outfit. Cut a cloth Tunic & Cloak & fitted them on 1st, then made the Gauntlets & Bucket Boots. Pieced together the belts & glued on the Sword. Then a whole lot of repainting (a lot of chain-mail to paint) Any thoughts?](userimages/customs/30500/30002-1.jpg) Black Knight (Dane) Avengersby CapSoldierHere is my latest Avenger, Dane Whitman The Black Knight!! Once again I did a blend of my favorite versions of his outfit. Cut a cloth Tunic & Clo...3 comments |
![[Vision] Always searching for more power to my Avengers team, I decided to do the Classic Vision. I once again used Dr. Manhattan figure as my base( need to sell him in a multipack...really good as a base figure). Painted the body Green with red face, kept the Awesome eyes the wat they were. Painted the belt,shorts & boots gold(many different renditions of his belt cut in the comics). Painted the chest diamond design & forehead gem Testors Shimmer gold, then made his cape. I like to set him with my Wonderman for the Duality of it. Comments welcomed.](userimages/customs/29500/29206-1.jpg) Vision Avengersby CapSoldierAlways searching for more power to my Avengers team, I decided to do the Classic Vision. I once again used Dr. Manhattan figure as my base( need to se...1 comments | ![[Classic Marvel Winter Soldier] After Perchasing this Figure, I discovered his uniform was not Dark Navy Blue & Black as the 1st clipping shows...but a blue & light brown as the bottom 2 clippings display. What???? Also the chest armor button were sculpted but not painted. I'm suprised with the accompening magazine cover that it wasn't black uniformed. So I did a total repaint. Flesh color was also a little pale when it arrived & his Red star on his shoulder was Way Oversized. I decided to also make more belt pouches for his belt, made his shoulder side-arm & added the Right leg belt & pouches...matching to more of images shown of Winter Soldier. Now he marches the cover much more, I think. Enjoy.](userimages/customs/28000/27995-1.jpg) Classic Marvel Winter Soldier Captain Americaby CapSoldierAfter Perchasing this Figure, I discovered his uniform was not Dark Navy Blue & Black as the 1st clipping shows...but a blue & light brown as ...0 comments |
![[Ice Star] Ice Star is one of my creations I sketched up years ago. Hidden Nuclear element powers his armor for weapons. Chest cannon is Nuke Ice blast ( in a containment field band), right arm cannon is a Ionic concussive laser, Left arm is dual missle launcher, with twin shoulder mount machine guns. Blue armor converts sound to energy.
I used a Dr. Manhattan figure for the base. Then raided all the spare parts I could get ahold of & created the Armor. This dude was fun to make. Enjoy.](userimages/customs/28000/27639-1.jpg) Ice Star My Heroesby CapSoldierIce Star is one of my creations I sketched up years ago. Hidden Nuclear element powers his armor for weapons. Chest cannon is Nuke Ice blast ( in a co...2 comments | ![[Black Adam] Finally got around to creating my own Black Adam figure. I like the Alex Ross version...but didn't want to shell out $40 to $75 bucks. I used a WWE Kane figure & did my repaint as well as molding hair & attaching buckets on boots. Free handed the Lightning Bolt in 1 try!! Spent most of my time on his cloak ( seldom used but I prefer it) Any thoughts?](userimages/customs/27500/27179-1.jpg) Black Adam DC Universeby CapSoldierFinally got around to creating my own Black Adam figure. I like the Alex Ross version...but didn't want to shell out $40 to $75 bucks. I used a WWE Ka...2 comments |
|