![[Gladiator] Took a Dr. Impossible and stripped him down to just torso and legs. Sculpted on the chest emblem, belt and boots. Then I added some strip styrene for the divided between the blue and red on the chest.
I wanted him to have bigger arms so I used some from a TNA figure. I had to bored into the arms to get them to accept a DCUC shoulder peg. Then I added the glove details to the biceps.
The head is from a Hush Superman. I shaved most of his hair off then drilled in long skinny screws down the middle where I wanted his mohawk to be. Then I took my dremel and cut the screw heads off and filled the gaps in with Aves. Once that was dry I applied another coat of Aves and sculpted the hair detail into that.
-Finn](userimages/customs/32000/31697-1.jpg) Gladiator Marvel Legendsby Green SkinTook a Dr. Impossible and stripped him down to just torso and legs. Sculpted on the chest emblem, belt and boots. Then I added some strip styrene fo...6 comments | ![[Anthonar Hors'on, Traitor Dwarf of Black Ridge (AD] Made from a Spawn Clown & Lots of Aves. Anthonar was the main villain from my old AD&D campaign.
Anthonar Hors'on is the famous traitor of Black Ridge. Long ago he was warchief and a close adviser to the Grand Chieftain of the Black Ridge Clan. He led his clan to many victories against the neighboring Deephaven Elves, helped rid the Ice Mountains of the goblin menance, and lead the talks to broker an alliance with the human nation of Istafar.
Since he was one of the grandest warriors of his tribe, that made his treachery even more shocking as he made a secret alliance with an clan of Orcish Mages. He led a group of Orc Illusionist in an assault on the Istafar Citadel of Aleria. Using the illusionists magic, they appeared as Black Ridge Beserkers and Anthonar disguised himself as the Grand Chieftan himself.
Thinking that they were betrayed by their dwarven allies, Istafar mounted an invasion force into the Ice Mountains. Intent on making the dwarves pay for their betra](userimages/customs/31500/31488-1.jpg) Anthonar Hors'on, Traitor Dwarf of Black Ridge (AD Originalby Green SkinMade from a Spawn Clown & Lots of Aves. Anthonar was the main villain from my old AD&D campaign.
Anthonar Hors'on is the famous traitor of B...2 comments |
![[Molly Hayes] This was the other entry for the Brat Pack contest that I didn't finish on time.
Head- The face area is from Sakura the cap was taken from an old school Elektra, and the hair is from a Thor.
Torso- This is a Sakura torso with all the clothing stripped off, and I resculpted a hoodie and jeans over the bare figure.
Arm- These were taken from a RoC Duke, and the hands I think are from a Catwoman.
Legs- These were taken from a BA Baracus figure and cut down to accept a Sota hip joint.
The barbell is from a WWE Mark Henry.](userimages/customs/31500/31264-1.jpg) Molly Hayes Marvel Legendsby Green SkinThis was the other entry for the Brat Pack contest that I didn't finish on time.
Head- The face area is from Sakura the cap was taken from an old sc...14 comments | ![[Loki W/ Ikol] This guy was suppose to be for the Brat Pack contest, but I didn't have the time to finish him before the dead line.
Head- Beast Boy
Torso- B.A. Baracus
Legs- Face Off Colossus
Arms- Series 3 Robin
Ikol- Some McFarlane crow with the attachment thing from Antman.
Daggers- no idea, they were just chillin in my fodder bin.
cheers](userimages/customs/31500/31262-1.jpg) Loki W/ Ikol Marvel Legendsby Green SkinThis guy was suppose to be for the Brat Pack contest, but I didn't have the time to finish him before the dead line.
Head- Beast Boy
Torso- B.A. Bar...8 comments |
![[Legion] For Legion, I thought his normal costume was a bit boring so I incorporated parts of his Age of X costume. The end result if kind of a hybrid between the 616 and AoX looks.
I started with a Jigsaw, removed all the pouches and holsters and sanded off the Jigsaw-y parts. I then swapped the head for a Genis-vel and used Aves to make his hair. The armor plates on the pants are Aves and the suspenders are cut down from a Bionic Commando figure. Wrist selector is also made from Aves.
For the ability pics, I just raided my fodder bin.
-Finn](userimages/customs/31000/30972-1.jpg) Legion Marvel Legendsby Green SkinFor Legion, I thought his normal costume was a bit boring so I incorporated parts of his Age of X costume. The end result if kind of a hybrid between...6 comments | ![[Baron Zemo] I started with a Yellow Jacket and ripped off the body fins, boots, head and arms. I gave him boots and gloves from a Mr. Fantastic, the head of Moon Knight, and the arms of Dr. Strange. The belt, furry bits and headband are all Aves. The pistol is from a Dr. Doom, and the sword was from a lot.
I'm experimenting with different painting techniques, so I tried out a metallic look for Zemo. Let me know what you guys think.
-Finn](userimages/customs/31000/30970-1.jpg) Baron Zemo Marvel Legendsby Green SkinI started with a Yellow Jacket and ripped off the body fins, boots, head and arms. I gave him boots and gloves from a Mr. Fantastic, the head of Moo...15 comments |
![[World War Hulk!!] Never really cared for the factory WWHulk so I figured I'd give it a shot. Started with most of a Red Hulk. The head is from a Gamma Punch Hulk. The leg straps, armor plates on the left arm,sandals, headband, and the entire right arm are all made from Aves.
The shoulder pad is from an Annihilus, and the sword shield is modified to fit the Hulk sword. The sword is from the original WWHulk figure. The shield is from a Clash of the Titans figure. Not sure what the axe is from, maybe a Medival Spawn.
Since the right arm is scratch built, critiques are very welcome.
-Finn](userimages/customs/31000/30591-1.jpg) World War Hulk!! Marvel Legendsby Green SkinNever really cared for the factory WWHulk so I figured I'd give it a shot. Started with most of a Red Hulk. The head is from a Gamma Punch Hulk. ...13 comments | ![[Pixie] I used a Kitty Pryde figure for the base. Drilled into the back to fit the obligatory Wasp wings. Head is from an Elektra with a bit of the hair trimmed to accommodate the movement of the wings. Uniform lines are strip styrene, and the boots/gauntlets are made from Aves. No idea what the soul dagger is from.
Ran out of my usual black paint so I gave Tamiya brand a shot and it worked out WONDERFULLY!
-Finn](userimages/customs/30500/30294-1.jpg) Pixie Marvel Legendsby Green SkinI used a Kitty Pryde figure for the base. Drilled into the back to fit the obligatory Wasp wings. Head is from an Elektra with a bit of the hair trim...10 comments |
![[Wonder Woman] I used Black Canary as a base. Switch the lower legs with Artemis and sanded off the straps. Used a Wonder Woman head, and used hair from a X3 Jean Grey. Star on tiara was cut from a piece of plastic. Lines on torso were drawn on with an archival pen. Bracers, chest W and ankle straps are Aves. Belt is modified from a Troia figure. Shield and lasso are from a WW series 4. Drilled into hand so she could hold the sword, and no idea what the sword is from.
-Fin](userimages/customs/30000/29934-1.jpg) Wonder Woman D.C. Universeby Green SkinI used Black Canary as a base. Switch the lower legs with Artemis and sanded off the straps. Used a Wonder Woman head, and used hair from a X3 Jean ...9 comments | ![[Reptile] First I swapped the arms with the most recent Lizard figure. Then I carved the feet off the Lizards legs and modified them to fit on the foot posts of the Darkness figure.
Then I used some Aves to smooth out the legs and center torso, and added the trim on the knee pads. I molded the green part of the costume on using Aves, and gave it texture by rolling a sculpt tool over it. The belt is made from a flipped over ammo strip. The shoulder pads are made from the shin guards of the HoM Wolverine. The gold trim was made from Strip Styrene.
The head is made by cutting out the eyes from a Venom head. Inserting eyes from a Moon Knight head and using Aves to add the black wrappings.](userimages/customs/30000/29639-1.jpg) Reptile Mortal Kombatby Green SkinFirst I swapped the arms with the most recent Lizard figure. Then I carved the feet off the Lizards legs and modified them to fit on the foot posts o...6 comments |
![[Mr. Negative] Gotham Thug with the alt head from the 2pack Captain America. The hair on the head was redone, and the body was given a proper tie. No idea what the sword is from, it was just lying around.](userimages/customs/30000/29564-1.jpg) Mr. Negative Marvel Legendsby Green SkinGotham Thug with the alt head from the 2pack Captain America. The hair on the head was redone, and the body was given a proper tie. No idea what the...4 comments | ![[Grey Gargoyle] Base Body-Black Panther
Head-Green Goblin
Sanded the texture off the gloves and boots. Used strips from a Mr. Sinister cape for the straps. For the head I made the mask with Strip styrene, and used Aves to redo the hair.
The paint job was a based coat of dark grey and a whole lot of dry brushing to bring the color tone up to light grey. The books and gloves are a simple blue tone with an archival pen used to make the lines.
cheers](userimages/customs/30000/29563-1.jpg) Grey Gargoyle Marvel Legendsby Green SkinBase Body-Black Panther
Head-Green Goblin
Sanded the texture off the gloves and boots. Used strips from a Mr. Sinister cape for the straps. For...8 comments |
![[Cyber] This is my second version of him and this time I wanted a more beefy version that would really tower over Wolverine. After a few failed attempts to carve out the arm lines, I settled for painting them on.
-Venom Base
-Hulk head
-Bishop hands](userimages/customs/28500/28342-1.jpg) Cyber Marvel Legendsby Green SkinThis is my second version of him and this time I wanted a more beefy version that would really tower over Wolverine. After a few failed attempts to ca...6 comments | ![[Whirlwind] It's been a few years since I've done a Whirlwind, thought I'd give his newest costume a shot.
-Tarantula base
-Wolverine head
-Arms blades from some Samurai Spawn figure.](userimages/customs/28500/28341-1.jpg) Whirlwind Marvel Legendsby Green SkinIt's been a few years since I've done a Whirlwind, thought I'd give his newest costume a shot.
-Tarantula base
-Wolverine head
-Arms blades from some ...2 comments |
![[Wrecker] Here's my leader of the Wrecking Crew.
Head- Juggernaut
Arms & Chest- Hercules
Legs & Pelvis- TNA Scott Steiner
Crowbar- Wildcat's Maul](userimages/customs/28000/27965-1.jpg) Wrecker Marvel Legendsby Green SkinHere's my leader of the Wrecking Crew.
Head- Juggernaut
Arms & Chest- Hercules
Legs & Pelvis- TNA Scott Steiner
Crowbar- Wildcat's Ma...2 comments | ![[Thunderball] This guy was just a some sanding, a lil sculpting, and a repaint of a WWE Batista. The flail is made from a real chain with a wire wound through the links to make it poseable. The Flail head is from an Absorbing Man.](userimages/customs/28000/27964-1.jpg) Thunderball Marvel Legendsby Green SkinThis guy was just a some sanding, a lil sculpting, and a repaint of a WWE Batista. The flail is made from a real chain with a wire wound through the...2 comments |
![[Custom Weapons Deadpool (Challenge Custom)] Deadpool is made from FO Punisher body, with a Moon Knight Head. Harness was cannibalized from a Despero harness. Grenades are from a Spawn figure, belt is from a Batman, & the rest is either strip styrene or plastic panel.
The guns are all basic hack mods made from other guns. The sword and the chainsaw are scratch built from Sculpty.](userimages/customs/27500/27166-1.jpg) Custom Weapons Deadpool (Challenge Custom) Marvel Legendsby Green SkinDeadpool is made from FO Punisher body, with a Moon Knight Head. Harness was cannibalized from a Despero harness. Grenades are from a Spawn figure,...8 comments | ![[Colossus: Aoa] Sanded down an Abomination figure to remove all the bumps.
Used a ton of apoxie sculpt everything onto arms & legs.
Made shoulder strap from Despero belt.
Used flex plastic to make the yellow shirt and belt.
Attached belt pouches.
Added belt sash onto a Hulk head, then attached.
Painted.](userimages/customs/26500/26461-1.jpg) Colossus: Aoa Marvel Legendsby Green SkinSanded down an Abomination figure to remove all the bumps.
Used a ton of apoxie sculpt everything onto arms & legs.
Made shoulder strap from Despe...9 comments |
![[Tiger Shark] The build on this guy was pretty simple.
Body-Venom
Head- Hulk
Head Fin- Flex Plastic w/rigid core
Arm fins- Lizard
Thanks for looking!
Fin](userimages/customs/26500/26447-1.jpg) Tiger Shark Marvel Legendsby Green SkinThe build on this guy was pretty simple.
Body-Venom
Head- Hulk
Head Fin- Flex Plastic w/rigid core
Arm fins- Lizard
Thanks for looking!
Fin...8 comments | ![[Mind Flayer (Challenge Custom)] Also called Illithids, Mind Flayers are one of the oldest most iconic monsters in Dungeons & Dragons history. Created by Gary Gygax in 1975, Mind Flayers have appeared in every edition of D&D since.
Dwelling in undergroud cities and caves, Mind Flayers are extremely perilous to face. They will often use the Mind Blast attack to stun their victims, then either suck out their brain outright or turn them into a slave, called a Thrall.
==========================
Body- Spawn
Shoulder- FF Movie Mr. Fantastic
Arms/ Hands- Lady Deathstrike
Head-Sculpted
Painted in Vallejo Game Color.](userimages/customs/26500/26138-1.jpg) Mind Flayer (Challenge Custom) |
![[Deadpool: Boxer Shorts] I finally caved and made a Deadpool. I took an Adon and carves the neck muscles down. Then I took a torch to him to make the scars on his skin, afterwhich I replaced the belt on the shorts which completely melted and dripped off. Then with a little help from some Aves and sandpaper made the feed into socks. I couldn't find a Deadpool head so I had to make one from a Captain America head.
The paint job is mostly fleshtones, with a little white here and there. Lastly I applied brown, then red ink onto the scars to make them extra gross.
Hopefully I made something a little interesting and didn't just add to the never ending sea of Deadpool customs. Cheers.](userimages/customs/19000/18689-1.jpg) Deadpool: Boxer Shorts Marvel Legendsby Green SkinI finally caved and made a Deadpool. I took an Adon and carves the neck muscles down. Then I took a torch to him to make the scars on his skin, afte...5 comments | ![[Lockjaw] For this guy I had to sand off the collar and resulpt parts of the neck, underbelly, and most of the back leg. I also had to gut a bunch of electronic parts from his insides and replaced them with 6 siders. Then if was just a matter of a paintjob with some drybrushing to make the fur pop, and inserting the antenna which was made from Aves. That's it.](userimages/customs/19000/18688-1.jpg) Lockjaw Marvel Legendsby Green SkinFor this guy I had to sand off the collar and resulpt parts of the neck, underbelly, and most of the back leg. I also had to gut a bunch of electroni...2 comments |
![[Iron Man] Earth- 357
On this earth it was Fitzgerald and not Bishop that came back in time to prevent the rise of the sentinels. He approached the probelm from a different angle than Bishop and executed his Triple Nick theory. By murdering Nikolaus Otto, Nikola Tesla, and Nicolas Leonard than Fitzgerald believed that technology would not rise to a high enough level for Sentinels to every be build.
Without the arrival of the combustion engine the steam engine continued to develop. Anthony Stark, Son of Railroad Titan Howard Stark, makes enormous headway into steam engines by combining them with a 'solarised vacuum' magnetix. He is kidnapped by Nathan Essex and held in an abandoned train yard. Here he is forced to construct a Solarized Generator and instead builds an iron suit from the train parts.
****
Ironman is painted in inks. His Steam Cannon is a cut down fusilage from a goblin glider. The Minigun is harvested from an Iron Monger. His should cannon and steam tank are scratch built](userimages/customs/18500/18481-1.jpg) Iron Man Iron Manby Green SkinEarth- 357
On this earth it was Fitzgerald and not Bishop that came back in time to prevent the rise of the sentinels. He approached the probelm from...2 comments | ![[Groot] First I hacked off all the texture on Sasquatch and added some height in his legs. Them I sculpted the groot face over Sasquatches after I hacked off his brows and removed his hair. I scupted his toes and added sculpt where his uniform ends. The best is made from Flex panel and Joe belt pouches.](userimages/customs/17500/17112-1.jpg) Groot Marvel Legendsby Green SkinFirst I hacked off all the texture on Sasquatch and added some height in his legs. Them I sculpted the groot face over Sasquatches after I hacked off...6 comments |
![[Rocket Racoon] Basically took Logan hacked off the claws, sculpted on some gloves. Hacked the legs off below the knee then resculpted some raccon legs over some old Antman legs and glued them into place. The belt pouches are from some Joes, as well as the guns. The head and tail are pure sculpted Aves. The tail has a brass wire core which I anchored in the booty of the Logan to give is some swing.](userimages/customs/17500/17111-1.jpg) Rocket Racoon Marvel Legendsby Green SkinBasically took Logan hacked off the claws, sculpted on some gloves. Hacked the legs off below the knee then resculpted some raccon legs over some old...3 comments | ![[Isaiah Bradley] This guy was basically an excuse to try sculpting scale mail. Basically I stripped Balrog down to be a blank, then I sculpted on the scales, and added the belt. I used a little sculpt extended the hairline from the lowest point and that became the mask. The mask ties are from Iceman's armband. The shield was made from one of those clear stands that used to come with early Marvel Legends. I was going to put the insignia on the shield be my printed botched my last sheet of decal paper and I ran outta time to spend on it. Overall a fun custom, I'll know what not to do next time I sculpt armor scales.](userimages/customs/17000/16866-1.jpg) Isaiah Bradley Marvel Legendsby Green SkinThis guy was basically an excuse to try sculpting scale mail. Basically I stripped Balrog down to be a blank, then I sculpted on the scales, and adde...6 comments |
![[Portal] This was made of a heavily modified Angel body & Head. You'll notice the bend in the leg, which annoyed me to no end but it's just how the figure came and I didn't notice it until it was halfway painted. The forearms, shins, and thighs are all sculpt with details done in strip styrene. The shoulder pads are done in dvd case plastic. The Shoulder bandolier is done in flex panel with cut pipe for the cyclinders. The bandanna is from a Ryu figure. The gun is scratch built. Any feedback on how I can improve would be very welcome.
**the second pic looks a bit funky, I just wanted the gun to be in there.](userimages/customs/17000/16783-1.jpg) Portal Marvel Legendsby Green SkinThis was made of a heavily modified Angel body & Head. You'll notice the bend in the leg, which annoyed me to no end but it's just how the figure...1 comments | ![[Blacklash] This guy was made with an Iceman body and a Daredevil head. I added some sculpty to the forearms and boots, a little on the bridge of the nose, and I attached the hair piece from the AOA Sabertooth. The cape is a modified repaint of the Adam Warlock's. The hip bag is scratch built from flex panels. I usually include weapons in seperate photos for people, so it is not pictured. Any feedback on how I could improve is welcomed.](userimages/customs/17000/16781-1.jpg) Blacklash Marvel Legendsby Green SkinThis guy was made with an Iceman body and a Daredevil head. I added some sculpty to the forearms and boots, a little on the bridge of the nose, and I...3 comments |
![[Vanisher] I took a Adon head and resculpted him to be bald. Then I added a few minor details with strip styrene to a Union jack. Then it was just a matter of a simple repaint. The most annoying aspect of the repaint is that the arms tattoos on Vanisher are different depending on who is drawing him.](userimages/customs/17000/16739-1.jpg) Vanisher Marvel Legendsby Green SkinI took a Adon head and resculpted him to be bald. Then I added a few minor details with strip styrene to a Union jack. Then it was just a matter of...1 comments | ![[Karnak] This one was actually pretty simply. I added arm, leg & fist bands of flex panel. Added some aves over the hair, with a little for the mustache. Then added a belt and loin cloth of flex panels. Then I airbrushed the whole thing green, added some flesh tone and inked over the dark areas.](userimages/customs/17000/16733-1.jpg) Karnak Marvel Legendsby Green SkinThis one was actually pretty simply. I added arm, leg & fist bands of flex panel. Added some aves over the hair, with a little for the mustache...3 comments |
|