![[Magneto] simple repaint the MU Magneto replacing the colors for the classic uniform, with matte vinylic paints.](userimages/customs/47500/47107-1.jpg) Magneto | ![[Ezio Auditore Zombie] Then a very original project, which was only done because my Ezio (Assassins Creed Neca) fell from the shelf at night and my dog (just 3 months) destroyed the figure.
Then I thought, what to do with that Ezio destroyed? Why not a EZIO ZOMBIE?
The damage caused by my dog bites summed up the tears in the hood and cape, knife and forefinger of his left hand, breaking the elbow right (though not sure if this was because of bites or because of the fall).
So I just worsen the state, burning with hot knife few strategic locations, sculpt with epoxy a lot of rotten meat on the stump of his right arm, tearing even more the clothes, hood and cape and giving a repaint the entire figure in simulating much dirt and blood, with matte vinylic paints.](userimages/customs/47500/47106-1.jpg) Ezio Auditore Zombie Originalby Leo CustomsThen a very original project, which was only done because my Ezio (Assassins Creed Neca) fell from the shelf at night and my dog (just 3 months) destr...3 comments |
![[Captain America Avengers Movie] The bases were Ultraman, Manhunter Robot, both DCU, and Movie Captain. Painting with matte vinylic paints and silver enamel.](userimages/customs/47500/47085-1.jpg) Captain America Avengers Movie | ![[Original Concept Sinestro Corps] The base was the McFarlane Sansker, with only sculpture with epoxy in yellow clothes, bracelets and ring. Completely repainted with matte vinylic and silver enamel, and the yellow parts of the clothing and bracelets have a coat of enamel gold, to give an effect similar to parts of DC Direct Sinestro Corps.](userimages/customs/47500/47083-1.jpg) Original Concept Sinestro Corps DC Directby Leo CustomsThe base was the McFarlane Sansker, with only sculpture with epoxy in yellow clothes, bracelets and ring. Completely repainted with matte vinylic and ...9 comments |
![[Doppelganger] I used the Neca Underworld Lara Croft as the base, all resculpted with epoxy. Braids are a version of Lara Croft Movie, think of the Play Arts. Painting with matte vinylic paints and gloss varnish on strategic parts of black, and a little silver enamel.](userimages/customs/47000/46913-1.jpg) Doppelganger Tomb Raiderby Leo CustomsI used the Neca Underworld Lara Croft as the base, all resculpted with epoxy. Braids are a version of Lara Croft Movie, think of the Play Arts. Painti...6 comments | ![[Red Sonja] The base is Belit and hair of Witchblade LBCH, with many details resculpted with epoxy. The sword is the Aragorn, and shield is a Peter Criss (Kiss McFarlane). Painting with matte vinylic paints and silver enamel.](userimages/customs/47000/46912-1.jpg) Red Sonja Marvel Legendsby Leo CustomsThe base is Belit and hair of Witchblade LBCH, with many details resculpted with epoxy. The sword is the Aragorn, and shield is a Peter Criss (Kiss Mc...6 comments |
![[The Thing] Just resculpt and repainting of HML Thing, with matte white vinylic paint and black permanent maker. The symbol was printed and pasted on the figure.](userimages/customs/47000/46575-1.jpg) The Thing Marvel Legendsby Leo CustomsJust resculpt and repainting of HML Thing, with matte white vinylic paint and black permanent maker. The symbol was printed and pasted on the figure....5 comments | ![[Reed Richards, the Mr. Fantastic] Even if, repaint of Reed with matte white viniliv paint and black permanent pen. And the symbol, same thing.](userimages/customs/47000/46533-1.jpg) Reed Richards, the Mr. Fantastic |
![[Sue Richards, the Invisible Woman] Just repainting of Sue, with matte white vinylic paint and black permanent pen. The symbol was printed and pasted on the figure.
The force field was done with plastic blister oval shaped, attached to a acrylic support and base of Wasp.](userimages/customs/47000/46532-1.jpg) Sue Richards, the Invisible Woman Marvel Legendsby Leo CustomsJust repainting of Sue, with matte white vinylic paint and black permanent pen. The symbol was printed and pasted on the figure.
The force field was d...5 comments | ![[Shadow Lass] Base: Jade with head of Mera, and the cape of Psycho Pirate, all DCD.
Small details (tiara and bracelets) sculpted in epoxy.
Painted with matte vinylic paints.](userimages/customs/46500/46496-1.jpg) Shadow Lass DC Directby Leo CustomsBase: Jade with head of Mera, and the cape of Psycho Pirate, all DCD.
Small details (tiara and bracelets) sculpted in epoxy.
Painted with matte viny...8 comments |
![[Gladiator, Shi'ar Empire] I used Mr. Sinestro full sculpted with epoxy. Painted with matte vinylis paints and bright varnish on the blue, and a little golden enamel.](userimages/customs/46500/46495-1.jpg) Gladiator, Shi'ar Empire Marvel Legendsby Leo CustomsI used Mr. Sinestro full sculpted with epoxy. Painted with matte vinylis paints and bright varnish on the blue, and a little golden enamel....6 comments | ![[Iceman] The base was the Hasbro Spider series Ares, with head of DCUC Lex Lutho. This custom was inspired by the work of master Raybot (see photo for reference). I used matte vinylic white paint, overlaid with drybrushing of vinylic matte light blue and more white.](userimages/customs/46500/46460-1.jpg) Iceman Marvel Legendsby Leo CustomsThe base was the Hasbro Spider series Ares, with head of DCUC Lex Lutho. This custom was inspired by the work of master Raybot (see photo for referenc...6 comments |
![[Scarlet Spider] The base was the Big Time Spider by Hasbro, totally resculpted. Painted with matte vinylic paints. The logo of the spider I caught in the net, print, cut out and pasted in Figure. He gave a little work cut legs, but was better than if it were painted...](userimages/customs/46500/46459-1.jpg) Scarlet Spider Marvel Legendsby Leo CustomsThe base was the Big Time Spider by Hasbro, totally resculpted. Painted with matte vinylic paints. The logo of the spider I caught in the net, print, ...2 comments | ![[Strong Guy] The base was a Jugger XMC, fully modified with epoxy. Os glasses are the DCUC Starman. Painted with matte vinylic paints.](userimages/customs/46500/46440-1.jpg) Strong Guy |
![[Toad] The base is Bullseye MU wave 1, fully modified with epoxy. Painted with matte vinylic paints.](userimages/customs/46500/46439-1.jpg) Toad | ![[Gladiator, Imperial Guard of Shi´Ar Emperor] Body: DCUC Green Lantern Medphyll. Head: DCUC Omac. Cape: DCSH Superman. cape´s collar: DCD Psycho Pirate. Details sculpted in epoxy. painted with matte vinylic paints and enamel gold paint.](userimages/customs/46500/46152-1.jpg) Gladiator, Imperial Guard of Shi´Ar Emperor Marvel Legendsby Leo CustomsBody: DCUC Green Lantern Medphyll. Head: DCUC Omac. Cape: DCSH Superman. cape´s collar: DCD Psycho Pirate. Details sculpted in epoxy. painted wi...7 comments |
![[Chapolin] As in the first version I made long ago, I used as the basis DCD Psycho Pirate, modified with epoxy. Painting with matte vinylic paints.](userimages/customs/46000/45665-1.jpg) Chapolin Originalby Leo CustomsAs in the first version I made long ago, I used as the basis DCD Psycho Pirate, modified with epoxy. Painting with matte vinylic paints....5 comments | ![[Maximus Decimus Merridius (the Gladiator)] Character played by Russell Crowe in the movie The Gladiator.
The base was Perseus (Neca Clash of Titans) sculpted with epoxy (such as changes in the face, chest armor, shoulder, shield and helmet). It was quite difficult to sculpt embossed details of armor and shield, and even harder to sculpt the helmet removable, but in the end, even that was good... I just thought he was not much like Russell, but keeping the helmet on the head until it passes... The shield is the Taskmaster and the sword (or gladius) of Perseus himself. Painting with matte vinylic paints and silver enamel. With much drybrushing technique.](userimages/customs/46000/45664-1.jpg) Maximus Decimus Merridius (the Gladiator) Gladiatorby Leo CustomsCharacter played by Russell Crowe in the movie The Gladiator.
The base was Perseus (Neca Clash of Titans) sculpted with epoxy (such as changes in the ...15 comments |
![[Rescue] The base is an IM movie with the head of a Sharon Carter. Half complicated transform this armor to him more feminine, but I tried to do my best, putting a pair of breasts and increasing hips and buttocks with epoxy. Painting with red enamel and silver, plus a little bit of white vinylic.](userimages/customs/46000/45543-1.jpg) Rescue Marvel Legendsby Leo CustomsThe base is an IM movie with the head of a Sharon Carter. Half complicated transform this armor to him more feminine, but I tried to do my best, putti...9 comments | ![[Fire] Base: DCUC Cheetah body and casthead of Poison Ivy (DCD). The feets is Donna Troy (DCD) and hands do not know for sure. Painting with matte vinylic paints and enamel gold.](userimages/customs/46000/45542-1.jpg) Fire DC Universeby Leo CustomsBase: DCUC Cheetah body and casthead of Poison Ivy (DCD). The feets is Donna Troy (DCD) and hands do not know for sure. Painting with matte vinylic pa...2 comments |
![[X-Force BEAST] I used the Avengers Hulk as a base, with some modifications to the head and pants with epoxy. Painting with matte vinylic paints.](userimages/customs/46000/45510-1.jpg) X-Force BEAST | ![[Red Lantern] An original creation related to the Lanterns universe, a RED LANTERN not yet given name (suggestions are welcome)
The base is a figure of Odin from the Final Fantasy. Only slightly modified horns, the rest is to repaint with matte vinylic paints and bright red enamel and silver. The symbol was made in Corel, printed, cut and pasted in the figure.](userimages/customs/46000/45509-1.jpg) Red Lantern DC Directby Leo CustomsAn original creation related to the Lanterns universe, a RED LANTERN not yet given name (suggestions are welcome)
The base is a figure of Odin from th...11 comments |
![[Cirdan (the Silmarillion)] The base is a figure of Sirius Black (Disney's Harry Potter, I think) and changed the original arms for the arms of Celeborn (LOTR Toy Biz). Sculpt the beard and added several LOTR and McFarlane accessories. Painting with vinyl paints and matte silver enamel.](userimages/customs/45000/44810-1.jpg) Cirdan (the Silmarillion) Lord of the Ringsby Leo CustomsThe base is a figure of Sirius Black (Disney's Harry Potter, I think) and changed the original arms for the arms of Celeborn (LOTR Toy Biz). Sculpt th...6 comments | ![[Pimp Destro] Simple repaint of Destro Classic as a base. I used matte vinylic paints, enamel gold, and black permanent marker, to make dots on clothing.](userimages/customs/45000/44809-1.jpg) Pimp Destro G.I. Joeby Leo CustomsSimple repaint of Destro Classic as a base. I used matte vinylic paints, enamel gold, and black permanent marker, to make dots on clothing....1 comments |
![[Mighty Mightor] The base was a Conan LCBH with Ant-Man boots, Taskmaster's hands and head from DCUC Hawkman. Appropriate modifications and sculpture horns with epoxy. I used the cape of Loki to do cape and kilt. The Tomahawk is a McFarlane Spawn figure. Painting with vinylic paints and matte enamel gold.](userimages/customs/44500/44427-1.jpg) Mighty Mightor Mighty Mightorby Leo CustomsThe base was a Conan LCBH with Ant-Man boots, Taskmaster's hands and head from DCUC Hawkman. Appropriate modifications and sculpture horns with epoxy....10 comments | ![[Shuri Black Phanter] The base was a Batgirl DCUC, all modified with epoxy. Painting with matte vinylic paints and brilliant detail, and silver enamel.](userimages/customs/44500/44426-1.jpg) Shuri Black Phanter |
![[Access] I used a 5" figure of a Batman with a different uniform. Sculpt the shoulder pads, the jacket and gloves and boots with epoxy. painted with matte acrylic paints and bright with some details.](userimages/customs/44500/44396-1.jpg) Access Amalgamby Leo CustomsI used a 5" figure of a Batman with a different uniform. Sculpt the shoulder pads, the jacket and gloves and boots with epoxy. painted with matte...1 comments | ![[Spot] Very simple recipe: Daredevil MU with a little epoxy covering face. Painting with white is very hard and gave a tremendous job covering all red. Points made with black permanent maker, brush and ink because it would be difficult to achieve such precise lines.](userimages/customs/44500/44395-1.jpg) Spot Marvel Universeby Leo CustomsVery simple recipe: Daredevil MU with a little epoxy covering face. Painting with white is very hard and gave a tremendous job covering all red. Point...2 comments |
![[Alejandra Jones - Ghost Rider] Head cast of Ghost Rider Movie, Torso (all resculpted with epoxy) of a Buffy figure. arms of Hasbro X3 Jean Grey, neckline of Longshot, the hands of a Chronicles of Narnia guy, armor probably a female figure of Spawn. To make the weapon, used a Gimli axe, a strip of cover of Mr. Sinister, Nails and a piece of blister. The fire on the tires of bike was made with parts of some flames i had here and silicone glue. All painted with matte vinylic paints and silver enamel. Some details in the clothes I gave glossy with permanent marker.](userimages/customs/44500/44323-1.jpg) Alejandra Jones - Ghost Rider Marvel Legendsby Leo CustomsHead cast of Ghost Rider Movie, Torso (all resculpted with epoxy) of a Buffy figure. arms of Hasbro X3 Jean Grey, neckline of Longshot, the hands of a...10 comments | ![[Aurora and Northstar] The bases were a Multiple Man and Psylocke. Painting with matte vinylic paints. Above the matte black, I used permanent marker, to better define the rays of white clothes and give a glow in uniforms.](userimages/customs/44500/44288-1.jpg) Aurora and Northstar Marvel Universeby Leo CustomsThe bases were a Multiple Man and Psylocke. Painting with matte vinylic paints. Above the matte black, I used permanent marker, to better define the r...3 comments |
|