![[Bucky Cap] -Here's captain skyflakes... I mean bucky cap (sorry, he just reminds me of the skyflakes crackers whenever I look at him... Haha!)
-This started off as a dcuc body which I picked because of the smooth body that it has, perfect for this particular project. The head has this generic looking face and a bald head (which is color green and have some eye like things on his scalp.. Yeesh! What an ugly looking character, don't know who that character was though.)
-I sculpted the mask (also the wings and the "a" on his forehead), the utility belt was also sculpted using waterstop/plumber's putty (including the gun holster and pouches). The trimmings of the boots were also sculpted.
-I was originally aiming for a blue metallic chrome for his body but it just turned into a really really reaaaaaaaaaally smooth and shiny blue... Well, I think it still looks good though.
-The hardest part was painting the eyes... Arrrrgh... Well, I'm proud about how the eyes turned out. :)
-Oh! Btw,](userimages/customs/21500/21020-1.jpg) Bucky Cap Marvelby getsa-Here's captain skyflakes... I mean bucky cap (sorry, he just reminds me of the skyflakes crackers whenever I look at him... Haha!)
-This started off...10 comments | ![[Jean Grey] -Here's classic jean grey (w/ pony tail), sculpted pouches, shoulder pads, head gear, hair, "x" on the belt...](userimages/customs/21000/20835-1.jpg) Jean Grey X-Menby getsa-Here's classic jean grey (w/ pony tail), sculpted pouches, shoulder pads, head gear, hair, "x" on the belt......0 comments |
![[Devil Jin] -Re-sculpted sota fei long head, (eye-brows, hair, horns), re-sculpted lower body (waist down) of evil ryu, removed the feet, replaced with shoes of an unknown figure (lotr I think) and then re-sculpted lower pants.
-Re-sculpted forearms/gauntlets and hands. The silver studs on the back of the gloves are pin heads
-Wings came from kingdom come hawkman, cut down and re-sized to fit (made it smaller), made a wing joint from scratch. (Pieces of plastic and waterstop) wings still have its articulation and is removable.
-The wings are attached by strong magnets. Magnets are drilled and buried at the back of the fig's body and on the wing joint.
-The hardest part was painting the details / tattoos on the body and the face. How I wish I have steady hands...](userimages/customs/21000/20833-1.jpg) Devil Jin Tekken 5by getsa-Re-sculpted sota fei long head, (eye-brows, hair, horns), re-sculpted lower body (waist down) of evil ryu, removed the feet, replaced with shoes of a...15 comments | ![[Ultimate Thor] I'm joining the band wagon! :) Here's an ultimate thor as requested by the client.
-I really had fun making this one as I've always wanted to make my own ultimate thor coz I think he's one of the coolest looking characters there is. I mean a hammer for bashing foes and some lightning powers to go with it... Oh how cool it is to be a god.... Haha!
-Used buttons for those circles on thor's body, sculpted over the upper torso, eye brows and beard. The hammer is built from scratch (betadine bottle cap, pre-paid card, sign pen, leather strips, twisties, and then sculpted on)
Maraming salamat po! :)](userimages/customs/21000/20618-1.jpg) Ultimate Thor Marvelby getsaI'm joining the band wagon! :) Here's an ultimate thor as requested by the client.
-I really had fun making this one as I've always wanted to make my...11 comments |
![[Yusuke Urameshi] Version 2... As I was not satisfied how my 1st yusuke looked like. I know this is not a character as famous as other comic book heroes, but he's one of my favorite characters! :)
This should have been a veeeery easy custom if I have found a sota fei long blue variant. But I didn't, so I just settled for the yellow variant and repainted the pants blue. Sculpted the belt, used the trimmings on the back of naruto gashapon head as trimmings on the belt of yusuke, and re-sculpted the gashapon head to look like yusuke and attached it to the fei long body.
Much of the work went on re-sculpting the head, chopped off the hair, added chin, sculpted the hair and there you go! Yusuke urameshi dark tournament version, sans the yellow shirt...
Reiiiiiiiiii guuuuuuuuunnnnnnnnnn!!!](userimages/customs/20500/20466-1.jpg) Yusuke Urameshi Yu Yu Hakushoby getsaVersion 2... As I was not satisfied how my 1st yusuke looked like. I know this is not a character as famous as other comic book heroes, but he's one o...2 comments | ![[King Leonidas] -Here's an easy one... I have made a base body from a wrestling figure, sculpted the feet, boots, arm bands, shoulder strap and repainted the trunks... Had it lying around until I finally had the chance of buying a cheap neca leonidas. I used its cape, head, accessories and there he is! Another articulated leonidas for my own collection! Well, its one of my favorite movies so forgive me for doing another leonidas custom... I just feel like I really have to do it... Haha!](userimages/customs/20500/20441-1.jpg) King Leonidas 300by getsa-Here's an easy one... I have made a base body from a wrestling figure, sculpted the feet, boots, arm bands, shoulder strap and repainted the trunks.....7 comments |
![[Juggernaut] I chopped off hulk's head, replaced it with an unknown wrestler's head, sculpted the neck (yes, the head still has its articulation)... Cut off his arms right in the biceps and the forearm area so I could put pieces of lego to extend it and make the arms a little longer, then I re-sculpted the extended parts in the arms and covered it with those metal thingies on juggy's arms (used plumbers putty). I also cut off some of his toes (ouch!) So that the feet won't look too wide when the boots are sculpted on.
I used a big plastic egg for his helmet and some ring cap bullets to replicate the screws on juggy's helmet. The helmet is removable and some plumbers putty was used inside so that the helmet would have a snug fit on the head.
Then I painted it with acrylics and there you go! One big juggernaut! Grrrrrraaaaaaaaaaaah!!!
Hope you liked it, thanks for looking! :)](userimages/customs/20500/20440-1.jpg) Juggernaut Marvelby getsaI chopped off hulk's head, replaced it with an unknown wrestler's head, sculpted the neck (yes, the head still has its articulation)... Cut off his ar...4 comments | ![[King Leonidas] Yeah, yeah, I know, there're lots of leonidas custom here in the realm, but hey! I know there's still room for another one. I wanna join those guys who already made one! :)
Maybe each of us should make our own leonidas or 300 custom, meet up, build an army of 300 spartan (action figure) soldiers, take a group picture of the whole lot, and make those persians and immortals soil their own pants! Haha!
It's one of my favorite movies so I felt like I had to make a king leonidas action figure. And since the neca leonidas figure is a bit pricey and it has useless articulation, I just made one myself with fodder parts that were available at that time. (Right now, he stands courageously in my display cabinet fighting off hordes of zombies... Hehe!)
Base figure:
Head / cape: magneto
Body: wrarrl
Weapons/shield: built from scratch
-Sculpted the beard, moustache, hair. Used the lid of hair wax canister as base for the shield then sculpted the details on it, added matchsticks to replicate brok](userimages/customs/20500/20077-1.jpg) King Leonidas 300by getsaYeah, yeah, I know, there're lots of leonidas custom here in the realm, but hey! I know there's still room for another one. I wanna join those guys wh...1 comments |
![[Moonstone] This was requested by a fellow collector (as of now, this figure is part of his ever growing dark avengers line up)
-Used psylocke as base, wasp for the arms and lower legs, resculpted psylocke's hair, used psylocke's belt as a scarf, sculpted the mask and the star on her chest.
-Most of the work goes to sanding off the joints. Sheeesh! What a pain... Haha!
Painted it with tamiya acrylics and sealed it with a kiss... Err... Sealed it with clear paint to eliminate paint chipping especially in the joints.
So here you go, a fully poseable/playable dark avenger moonstone.
Comments (may it be positive or negative) are more than welcome. :)](userimages/customs/20500/20076-1.jpg) Moonstone Marvelby getsaThis was requested by a fellow collector (as of now, this figure is part of his ever growing dark avengers line up)
-Used psylocke as base, wasp for ...2 comments | ![[Combatron] Combatron is one of the most famous filipino comic book characters (funny komiks) and for me, he is the coolest character of his time! He could kick megaman's @** provided that he would be given a visa and a plane ticket! Hehe!
I still remember going to the public market with my mom when I was still a kid, I'll go with her just so that I would be the first one to read our weekly issue of funny komiks ( I have two siblings so being the kids that we are, we all wanted to get our hands on it first.
-Sculpted the visor and helmet. Used cut-out plastic on the "u" on his forehead. Sculpted the "bahag" (skirt like g-string), parts of the knuckles and knees. Sculpted the upper torso (made it thicker and wider). Used buttons on the circle on his chest, hip disc, and foot blades. Sculpted the electro magnetic sword (if I remember it right, that's what he calls his sword)](userimages/customs/19500/19392-1.jpg) Combatron Miscby getsaCombatron is one of the most famous filipino comic book characters (funny komiks) and for me, he is the coolest character of his time! He could kick m...0 comments |
![[Venom] Icons
-I just drilled holes on the back, arms, and legs of icons venom, inserted twisties, coated them with glue stick, painted them black. I didn't change anything else because i already like how the icons venom looks... So there, i just added those symbiotes.
Smc stealth
-I've used the stealth variant because... Ahhh.. Uhmm.. I can't afford to buy a regular one! Haha! 'Bought the stealth loose and at a very good price.
-Painted the whole figure with black acrylic, painted the details on his face (the eyes, gums, teeth, tongue, etc), sculpted the white spider emblem (front and back) with water stop because i'm not sure if i can paint it decently (those long and thin spider arms on venom's emblem needs someone with a steady hand to paint it. Definitely not a job suited for me... Haha!) So i just decided to sculpt it. (Would have made my job sooooo much easier if i just bought a regular venom and not the stealth one. Haha!) I also removed the button at the back of the 6 inch venom](userimages/customs/19500/19391-1.jpg) Venom Spider-Manby getsaIcons
-I just drilled holes on the back, arms, and legs of icons venom, inserted twisties, coated them with glue stick, painted them black. I didn't ...3 comments | ![[Violent Ken] I just based this custom on the artworks that I've found on the web. Sculpted the hair, gave him a darker skin tone, added some blood stains and splashes on his arms and body. One of the quickest customs that I've made. =)](userimages/customs/19500/19215-1.jpg) Violent Ken Street Fighterby getsaI just based this custom on the artworks that I've found on the web. Sculpted the hair, gave him a darker skin tone, added some blood stains and splas...2 comments |
![[Cyber Akuma] Sculpted the right forearm, face plate, shoulder spikes, used plastic boards for the wings, sculpted it's base that connect the wings from the body and removed the shirt / gi
(I opted to do a shirtless cyber akuma so that the cybernetic parts of him will be more noticeable, and yes, I'm planning to make a normal cyber akuma one of this days... But hey! Another filipino customizer already made a great looking cyber akuma. I'm just a second rate, trying hard, copy cat! *Slap!* Haha!) This one just goes to my sf and akuma collection. Thanks for looking! =)](userimages/customs/19500/19214-1.jpg) Cyber Akuma Street Fighterby getsaSculpted the right forearm, face plate, shoulder spikes, used plastic boards for the wings, sculpted it's base that connect the wings from the body an...2 comments | ![[Mech Zangief] Just a repaint of the original sota zangief... Based coated him with black and then dry brushed him with silver. Just an addition to my street fighter collection... :)](userimages/customs/19500/19070-1.jpg) Mech Zangief Street Fighterby getsaJust a repaint of the original sota zangief... Based coated him with black and then dry brushed him with silver. Just an addition to my street fighter...2 comments |
![[Toguro Maximum Power] Maximum power toguro!
On their final battle, toguro crossed the boundaries of his own power. Going more than a hundred percent, he crushed yusuke's giant rei gun with his own two hands!
Sadly, (yes! I was sad that time! I wanted toguro to win! Haha!) Exceeding the limit of 100%, his giant hulking body whithered...
I chopped off the head of roto-cast hulk, replaced it with the modified head of an unknown 8" doll figure, cut off the ears, upper part of the hair blah blah... (Ended up using the face only, just sculpted the remaining parts of the head), put a cut out plastic dome in the shoulders before sculpting the extra muscles so that articulation won't be hampered. sculpted muscles and veins, sanded off the trimmings of the pants and sculpted new torn trimmmings (I made the pants shorter). Used a base coat of black and then dry brushed it with two shades of gray...](userimages/customs/19500/19068-1.jpg) Toguro Maximum Power Yu Yu Hakushoby getsaMaximum power toguro!
On their final battle, toguro crossed the boundaries of his own power. Going more than a hundred percent, he crushed yusuke's g...5 comments | ![[Yusuke Urameshi] Yuyu hakusho ("ghost fighter" as it was known in the philippines) was one of my favorite animes when I was still a kid. Didn't get a chance to buy a yusuke action figure when I was still in gradeschool coz I don't have enough money and my mom won't buy me one. So here you go, I've made one myself!
Tamiya for paint, waterstop sealant for all the sculpts.
Took off iron fist's collar, sculpted the shirt, replaced the head with a naruto gashapon head. Sanded off the whiskers off naruto's face and cut off the hair, sculpted the new hair, used the trimmings on the back of naruto's head and used it as the trimmings on yusuke's belt. Sliced off the open palm hand of iron fist and folded down the three fingers so that he would have a pointing gesture. Rei gun!!!](userimages/customs/19500/19040-1.jpg) Yusuke Urameshi Yu Yu Hakushoby getsaYuyu hakusho ("ghost fighter" as it was known in the philippines) was one of my favorite animes when I was still a kid. Didn't get a chance ...3 comments |
![[Toguro] Toguro is the opponent of yusuke urameshi in the dark tournament saga of yuyu hakusho.
he's one of my favorite villains and I've made him because I really wanted a toguro action figure but no figures of him have ever been made.
please be nice to me as this was one of my first tries on customizing.. haha! =)
I used a spiderman 3 venom unleashed 360 as a base figure for the body, savage dragon for the head, cut off the ears and the mohawk fin on his head, sculpted the hair, the veins that goes on his entire face and body, sculpted all the muscles, the huge shoulders, (I've put a small cut out plastic dome above the shoulders so that the joints would still be movable even if I sculpted the huge shoulders that covers part of the upper arm). sculpted the pants. I used water stop sealant as the sculpting material and tamiya acrylic for the paint.
the hardest part is that I've manually sanded (yes, I don't have a dremel, just plain sand papers) the whole figure to remove the embossed webbin](userimages/customs/19500/19039-1.jpg) Toguro Yu Yu Hakushoby getsaToguro is the opponent of yusuke urameshi in the dark tournament saga of yuyu hakusho.
he's one of my favorite villains and I've made him because I re...9 comments | |
|