![[Lil' Bratz Wonder Woman] As if bratz aren't annoyingly cute enough I got a full case of Lil' bratz which are half the size of the regular bratz. This was one I thought would make a good Wonder Woman since I had made the full size one. First I restyled the hair then painted the little outfit on her. The bottom white stars were hand painted on with a needle. Then I made her accessories out of metallic paper, and used some gold thread off of a christmas decoration for her lasso. The pictures shows her size in comparison to a heroclix.](userimages/customs/43500/43017-1.jpg) Lil' Bratz Wonder Woman DC Superheroesby RogueAs if bratz aren't annoyingly cute enough I got a full case of Lil' bratz which are half the size of the regular bratz. This was one I thought would m...16 comments | ![[Halo Nightwing] I was inspired by all the Marvel Halo customs, and wanted to make a version myself. When I got this figure I decided to make him into Nightwing since had the colors on his armor already. The first thing I did was repaint his head then added a mask and re-did the hair. After that I had to add sculpt to his right arm that was a robotic one. Then I repainted the armor and made the sticks. Today my dad helped me complete it by drilling holes in the back for his sticks.](userimages/customs/43000/42904-1.jpg) Halo Nightwing Haloby RogueI was inspired by all the Marvel Halo customs, and wanted to make a version myself. When I got this figure I decided to make him into Nightwing since ...26 comments |
![[Batgirl Bratz Mach III] I just had to repaint her eyes blue then repainted her body black. The boot tops are sewn and painted vinyl. Then I painted the design, boots/shoes, & gloves on with added vinyl pieces. Tge cqpe is sewn with velcro close and the mask is made from two seperate kinds of vinyl with ribbon ties.](userimages/customs/43000/42832-1.jpg) Batgirl Bratz Mach III | ![[Wonder Woman Bratz] I had to cut a good deal of her hair and restyled it. I painted her lips red and added glitter to her eyelids. I then painted the outfit on her and used a clay tool to paint the stars on the bathing suit. The belt it painted cardboard the tiara is gold foil with a confetti red star added and smaller red stars added as her earrings recently. The lasso is cut gold craft cord. The boots were painted red with a white line and sealed.](userimages/customs/43000/42831-1.jpg) Wonder Woman Bratz D.C. Universeby RogueI had to cut a good deal of her hair and restyled it. I painted her lips red and added glitter to her eyelids. I then painted the outfit on her and us...19 comments |
![[Wolverine Origins Bike] So I got this bike which was blue and realized it actually lights and makes noise when you push the button so I get some batteries and found out it works! So I just repainted it black in both shiny and matte paints and left the silver decor around the button. That was it and it looks so great with Wolvy!](userimages/customs/42500/42473-1.jpg) Wolverine Origins Bike X-Men - Moviesby RogueSo I got this bike which was blue and realized it actually lights and makes noise when you push the button so I get some batteries and found out it wo...19 comments | ![[Wolverine Origin Bratz] I saw this figure with a bike and got him right away. My brother suggested that I make him into the movie version of Wolvy. ^^
The first thing was to restyle the hair(still needs work) and painted on the facial hair and glued on some felt for the mustache.
Then I used some bratz clothes and peices for his jeans, belt, and tank top. The dog tag was made with metallic paper and sequence with a cut dog tag chain.
The hardest part was the jacket! At first I was going to fix up a ken biker jacket but it began falling apart so I had to make his jacket from scratch using only the zipper from the ken jacket. It was sewn from scrap vinyl then repainted the whole thing. The yellow parts were painted then sewn and glued to the jacket. His claws are just cut metallic cardboard. Then repainted his shoes and that was it!](userimages/customs/42500/42470-1.jpg) Wolverine Origin Bratz X-Men - Moviesby RogueI saw this figure with a bike and got him right away. My brother suggested that I make him into the movie version of Wolvy. ^^
The first thing was to...12 comments |
![[Phoenix Bratz] This is my second Phoenix bratz but I wanted to make the green version of the costume. Sanded her then painted several layers of green and gold paint. The top phoenix symbol was drawn then painted and sealed. The sash is gold painted fabric glued into place. That was it. :-D](userimages/customs/42500/42439-1.jpg) Phoenix Bratz X-Menby RogueThis is my second Phoenix bratz but I wanted to make the green version of the costume. Sanded her then painted several layers of green and gold paint....10 comments | ![[Catwoman Bratz] This is one I wanted to make but wasn't sure how to do the head dress. After making Harley Quinn and batgirls masks I decided to try this one look based on the comics. The hair was cut and restyled the body suit is painted with the exception of the collar that is added vinyl material with a cut sequence for the zipper and silver metallic marker for the zipper. The belt was resized to fit her and boots I had already. The head peice is hand sewn with ribbon ties so you can remove it. The goggles are made of carboard and clear vinyl that has been colored then a painted elastic peice around her head. The whip is a gi joe metal detector I re-cut. She came out so cute shes now my new favorite!](userimages/customs/42500/42198-1.jpg) Catwoman Bratz Batmanby RogueThis is one I wanted to make but wasn't sure how to do the head dress. After making Harley Quinn and batgirls masks I decided to try this one look bas...12 comments |
![[Snow Bunny Padme Amidala Bratz] For this one I restyled the hair and repainted the body. the belt is made from vinyl, and the cape is handsewn in baby blue and white material with baby blue trim and some blue pom poms added. The cape is removable and for the the boots the tops are are sewn with added blue trim. This is actually one I wanted make for a while since I actually made this costume for myself I know the detail of it pretty well. :-)](userimages/customs/42500/42163-1.jpg) Snow Bunny Padme Amidala Bratz Star Wars Clone Warsby RogueFor this one I restyled the hair and repainted the body. the belt is made from vinyl, and the cape is handsewn in baby blue and white material with ba...8 comments | ![[Harley Quinn M3 Bratz] After being sick for a couple of weeks had a lot of bratz to catch up on. This is one of them and again decided to not do the headpiece instead I restyled the hair for ponytails and this time added red and black pom poms. I then repainted the face, & body. Then added material on the shoe tops and some pipe wire around the wrists. The gun I found recently and it seemed to work with this figure.](userimages/customs/42500/42113-1.jpg) Harley Quinn M3 Bratz Batman Animatedby RogueAfter being sick for a couple of weeks had a lot of bratz to catch up on. This is one of them and again decided to not do the headpiece instead I rest...24 comments |
![[Emma Frost Crystal Transformg Bratz] This is the third Emma I've made with the exception of the crystal trans look. Her bodice is painted on but the pants and bootlegs are hand sewn material. The cape is also sewn and has a painted gold sequence at the top. Then I added the chocker and then taking a que from flobbowobbo I added glitter for that diamond transformation look.](userimages/customs/42500/42064-1.jpg) Emma Frost Crystal Transformg Bratz X-Menby RogueThis is the third Emma I've made with the exception of the crystal trans look. Her bodice is painted on but the pants and bootlegs are hand sewn mater...17 comments | ![[Lara Croft Bratz] This was one of the figures I hadn't gotten a chance to make yet. First I had to restyle the hair then painted on the top and repainted the shorts. I created the belt and buckle with gun holsters. Then I added a re-sewn backpack that contains bottle water, dictionary, binoculars, and camera.In other words she was fairly easy to make and yeah i went with the original look, but the doll does look a little like Angelina, maybe I'll do a movie next. ^^](userimages/customs/42000/41784-1.jpg) Lara Croft Bratz Tomb Raiderby RogueThis was one of the figures I hadn't gotten a chance to make yet. First I had to restyle the hair then painted on the top and repainted the shorts. I ...20 comments |
![[Avengers Movie Black Widow Bratz] Now that my Captain ghost rider America is done its back to the bratz!
This is actually the second Widow I made but the first went so fast I didn't get some good pics of it not making that mistake again!
Her hair was cut and her body repainted in several layers. The belt, harness, and holsters were made with vinyl, the painted on the detail and repainted the boots. The cuffs are also vinyl detailed then glued on. Thats about ut the beauty mark and eye color didn't need to be changed which is good. :-)](userimages/customs/41500/41488-1.jpg) Avengers Movie Black Widow Bratz Avengersby RogueNow that my Captain ghost rider America is done its back to the bratz!
This is actually the second Widow I made but the first went so fast I didn't g...15 comments | ![[Poison Ivy] Basically this is my own interpretation of Poison Ivy drawing from the comics and the animated series. I repainted her eyes and body then added glitter and some artificial leaves to her corset. I added more glitter to her eye lids, and then glued some leaves to her hair. Also made a little daisy flower for her to hold.
Very simple recipe but she came out so cute. ^^](userimages/customs/41500/41424-1.jpg) Poison Ivy Batmanby RogueBasically this is my own interpretation of Poison Ivy drawing from the comics and the animated series. I repainted her eyes and body then added glitte...6 comments |
![[Captain Ghost Rider America] It's based on a drawing I did last year a sort of what if Capt became a GR. So I got this figure at the Disney store and popped off the head modifying it. Then I repainted his body to match the image, sculpted the head out of clay and painted it. I added crystals to both heads so they're eyes have a glowing effect and also added gel pieces to the skull, and the neck.
The studded cuffs are from some bratz boys figures and worked well with this. The chain I bought at hobby lobby then hand painted it to look like old chain, it's actually pretty light so I was able to place it on the shield and then the other strand around his torso and arm without weighing down the whole figure.
The spikes on the shield and his shoulders is actually puffy t-shirt paint which worked out pretty good.
The final part was to use a brush and some watered down paint to create blood splatters on the shield and chest. Then I repackaged the figure and modified the front of the box and included my artwork in the fo](userimages/customs/41500/41423-1.jpg) Captain Ghost Rider America Marvel Selectby RogueIt's based on a drawing I did last year a sort of what if Capt became a GR. So I got this figure at the Disney store and popped off the head modifying...34 comments | ![[Damian Wayne Robin II] I love sidekicks especially Robin!! So I wanted to make a Damian Wayne Robin.
This is the second attempt at this particular figure.
Repainted the hair, and painted on the mask.The cape is hand sewn with hood
added to it and can be removed so can his utility belt.](userimages/customs/41500/41210-1.jpg) Damian Wayne Robin II Batman & Robinby RogueI love sidekicks especially Robin!! So I wanted to make a Damian Wayne Robin.
This is the second attempt at this particular figure.
Repainted the ha...8 comments |
![[Deadpool Bratz] Deadpool is a cool fun character so it would make sense to make him into a bratz!
First I had to sand paper and repair his right hand before I repainted him. After that I made the tiny straps out of painted vinyl. The main belt from the Kumandi figure with a painted round vinyl piece added in front.
The hood was sewn then painted and can be removed, but no his face is not disfigured it's much worse it's a pretty boy face, eek! I also used clear tape and board backing to make the comic bubble that reads "Seriously?" :-)](userimages/customs/41500/41203-1.jpg) Deadpool Bratz Marvel Universeby RogueDeadpool is a cool fun character so it would make sense to make him into a bratz!
First I had to sand paper and repair his right hand before I repaint...20 comments | ![[Nightwing] This is a Ken yes as in barbie but a special collector series with limited articulation but with statue-like detail so I wanted to make him into a great character and finally decided on Nightwing. First had to repaint his eyes then restyled his hair to resemble Ryan Sooks version of him. Then repainted the top and hand sewed the bottoms. The boots are hard plastic with sewn vinyl boot tops and at the top of his gloves. His mask is removable and also his metallic weapons.](userimages/customs/41000/40988-1.jpg) Nightwing Batmanby RogueThis is a Ken yes as in barbie but a special collector series with limited articulation but with statue-like detail so I wanted to make him into a gre...14 comments |
![[Harley Quinn Bratz Mach 2] This is the second attempt at making a Harley bit this time I didn't make the head piece instead just gave her pontytails. The body was sanded painted and sealed. She also comes with small deck of cards that include the Joker of course. ;-)](userimages/customs/41000/40786-1.jpg) Harley Quinn Bratz Mach 2 DC Universeby RogueThis is the second attempt at making a Harley bit this time I didn't make the head piece instead just gave her pontytails. The body was sanded painted...10 comments | ![[Superman Bratz] This is one of those ideas that are like duh why haven't I made him yet? This is actually from the masquerade bratz so he was a vampire with Edward hair bleh. So I sanded and painted over his lips then tried to style his hair and painted over the extra eyeliner. Then I painted the costume and and added a decal to his chest and made the belt out of vinyl. The cape is red velveteen with matchind decal on back. His boots are painted and sealed. Then I was done and Im happy to have a Superman with my Wonder Woman & Batman. ^^](userimages/customs/41000/40785-1.jpg) Superman Bratz Supermanby RogueThis is one of those ideas that are like duh why haven't I made him yet? This is actually from the masquerade bratz so he was a vampire with Edward ha...17 comments |
![[Supergirl Bratz Mach 2] The skirt was repainted then the belt painted and then made from vinyl pieces. The cape is red velveteen with printed emblem glued to it. The top was painted on and the emblem again printed and glued then sealed. The boots were repainted and hair restyled with blue earrings added.](userimages/customs/41000/40540-1.jpg) Supergirl Bratz Mach 2 Supermanby RogueThe skirt was repainted then the belt painted and then made from vinyl pieces. The cape is red velveteen with printed emblem glued to it. The top was ...10 comments | ![[Aayla Secura Mach 2] This is my second attempt at this figure. First I sandpapered and repainted her body then modified her top by adding an extra sleeve and repainting it. The next thing I did was paint the vinyl pieces then cut and glued it as her belt. The boots I had and repainted along with her legs in several browns. The last part was her headdress which is made out of black vinyl pieces then sewed and glued onto her head. after that I painted over it again, and then sewed the straps on her lekki and painted some more details then I was done. Not an easy figure to work on but love the end result.](userimages/customs/41000/40539-1.jpg) Aayla Secura Mach 2 Star Wars Clone Warsby RogueThis is my second attempt at this figure. First I sandpapered and repainted her body then modified her top by adding an extra sleeve and repainting it...8 comments |
![[Black Canary Bratz] This bratz has more articulation in her waist and wrists, plus she has rooted eyelashes. I painted gloves on her sealed them then I made her black bathing suit out of black vinyl and did some minor adjustments to her jacket which is separate and can be removed. The last part was painting on the grey stockings, and repainting the boots black and I was done!](userimages/customs/40500/40465-1.jpg) Black Canary Bratz D.C. Universeby RogueThis bratz has more articulation in her waist and wrists, plus she has rooted eyelashes. I painted gloves on her sealed them then I made her black bat...3 comments | ![[Disney's John Carter] I bought this figure on sale for $3 with the intention of making him into my comic character Jackket Knightmare, but once I made the 12" version of him I wasn't sure what to do with the DC character, that was until I saw John Carter. :-)
First I sandpapered his hug eyebrows and his blue shorts so they wouldn't show. Next I recolored his eyes lips, brows then painted his hair in several shades of brown and finally I used a sharpened brown watercolor pencil to create his facial hair. Once his face and legs were done I cut and painted several pieces of maroon colored cloth, and the off white vinyl pieces for his clothing and gear. His arm bands are strips of suede fabric also painted then tied and sewn around his biceps. The bottom was also painted and then sewn around his lower half then another piece painted in a darker shade of brown was placed over that for a layered look. The top piece was cut from the vinyl and painted with detail for his breastplate. The sheath was also made](userimages/customs/40500/40097-1.jpg) Disney's John Carter D.C. Universeby RogueI bought this figure on sale for $3 with the intention of making him into my comic character Jackket Knightmare, but once I made the 12" version ...13 comments |
![[Amazing Spiderman Bratz/Moxie] This is not a bratz but a Moxie figure, made by the same company. So what's teh difference? Moxie's are taller than bratz and have smaller eyes um yeah that's about it. For this one I removed the hair which was easier than my Maul bratz and repainted his body black, then added the red, and dark blue over it. The eyes were painted in with gold paint then I added more gold paint, and metallic foil paper so they shine in the light.After several coats I drew in lines all over his body and added the spider symbol on the front and back of his chest. The final touch was gluing on the tiny buttons on his wrists for webshooter then painting them and I'm done with move Amazing Spiderman! I hope I can find some webs for him, and then update with better pics later on. :)](userimages/customs/40500/40010-1.jpg) Amazing Spiderman Bratz/Moxie Spider-Man - Movieby RogueThis is not a bratz but a Moxie figure, made by the same company. So what's teh difference? Moxie's are taller than bratz and have smaller eyes um yea...13 comments | ![[60's Catwoman Bratz II] Here's my second version of the 60's Catwoman as a commissioned bratz! I made the mask, and ears both our of black painted felt, and elastic. The mask is removable but the ears aren't I had to sew it into her hair. The outfit was painted on with a black with silver glitter mix so it shimmers. Then I added some sculpted claws, and painted them gold. Finally, the necklace was made from costume gold jewelry pieces.](userimages/customs/40000/39723-1.jpg) 60's Catwoman Bratz II Batmanby RogueHere's my second version of the 60's Catwoman as a commissioned bratz! I made the mask, and ears both our of black painted felt, and elastic. The mask...10 comments |
![[Captian America Movie - Bratz] Restyled the hair then sandpapered him before coloring him dark blue. Then I added some puffy paint and then added another coat of maroon, blue, & white. Then I added some maroon vinyl pieces and a little gold cord with metallic silver star and shoulder pieces. The shield is silver cardboard with the printed shield on top and a clear strap on the inside to loop around his hand. The base is the Toybiz X men base. :-)](userimages/customs/40000/39576-1.jpg) Captian America Movie - Bratz Avengersby RogueRestyled the hair then sandpapered him before coloring him dark blue. Then I added some puffy paint and then added another coat of maroon, blue, &...4 comments | ![[Dread Pirate Roberts] His mustache was already painted on when I bought him so I just had to change the eye color and then add a small blonde pony tail. For his outfit I used some extra bratz clothes which needed to be painted a little. I had the boots already and the head piece I cut from some black material and the sword was from another figure. I hope to make a more accurate sword and make a Buttercup by the time I meet Cary Elwes next month. :)](userimages/customs/39500/39320-1.jpg) Dread Pirate Roberts Princess Brideby RogueHis mustache was already painted on when I bought him so I just had to change the eye color and then add a small blonde pony tail. For his outfit I us...8 comments |
![[Steampunk Belle Mach 2] This was another attempt at making a Steampunk Belle but in the yellow version dress. First I repainted her face and added eyelashes then redid her hair. went for more of a western steampunk circus style this time. I basically took the dress apart and then added the smaller skirt with bloomers. The hat and the vest were made from scratch, and the boots I had already. Just made the rose out of wire sequence and a rose button and had a silver teapot I painted bronze with little white fingerless gloves hand sewn. Updates with added lace half-petticoat, charm, and sunglasses. :)](userimages/customs/39500/39239-1.jpg) Steampunk Belle Mach 2 Beauty and the Beastby RogueThis was another attempt at making a Steampunk Belle but in the yellow version dress. First I repainted her face and added eyelashes then redid her ha...8 comments | ![[Ariel Designer] Disney came out with a Designer series last year featuring 10 Disney Princesses. Ariel became the most popular of the set and even now goes for $400 and up. What I did was buy the regular disney store doll repaint her face added lashes and re-created the dress from scratch as closely as possible to the original version. The hair was then restyled and the hair clip is made from clay. This took me a month to do and it was the hardest custom doll I ever made but I'm so happy with the result plus I saved a few hundred bucks. :)](userimages/customs/39500/39237-1.jpg) Ariel Designer Kingdom Heartsby RogueDisney came out with a Designer series last year featuring 10 Disney Princesses. Ariel became the most popular of the set and even now goes for $400 a...5 comments |
|