![[Brian Douglas - Copycat Batman - Batman - the Dark] This is my attempt to make one of the copycat Batmen from The Dark Knight. Brian is the unfortunate Fake Batman who is caught by The original at the start of the film - later the Joker kills him and strings him up outside of the city hall as an example of things to come.
This is real mash up of a custom here. The main body is a Character Option Primeval Tom Ryan figure, which if anyone sees one they should pick it up because it makes great SWAT fodder. I extended the legs and arms so he went from 5 inches to 6 inches, I switched hands for better gripping ones and made a cape out of some back fabric, stitching the edge so that it doesn't fray. The head is a Dark Knight suit Batman, (which is slightly larger than the Begins figure sculpt from the movie masters toy line) I placed the eyes of a Marcus Wright figure over the eyes on the cowl to show the skin. The neck joint is from the original Scarecrow figure from the Movie Masters and the gun is from a Buffy accessory pack. The Body arm](userimages/customs/24500/24376-1.jpg) Brian Douglas - Copycat Batman - Batman - the Dark Movie Mastersby DaxceonThis is my attempt to make one of the copycat Batmen from The Dark Knight. Brian is the unfortunate Fake Batman who is caught by The original at the s...2 comments | ![[The Joker - Batman - the Dark Knight] An simple but pleasing custom, The body stays the same, I switched the right hand so that it could grip. I added a real metal chain at the waist and I swapped heads with the Jail Cell Joker figure.
Head - Jail Cell Joker Movie Masters
Body - The Joker Movie Masters
Hand - Rorschach DC direct
Knife - Giles Buffy
Rocket Launcher - (Missile) Terminator 3 figure Neca, (Launcher) Card
Machine gun - Card
Stay tuned for more information on my custom thugs, Batmen, Batpod/battle-damaged tumbler as well as my custom Joker van pictured below and much more.](userimages/customs/24500/24375-1.jpg) The Joker - Batman - the Dark Knight Movie Mastersby DaxceonAn simple but pleasing custom, The body stays the same, I switched the right hand so that it could grip. I added a real metal chain at the waist and I...2 comments |
![[Lucius Fox Batman Begins the Dark Knight] The head ball joint and back half is from a Gladiators Predator action figure. The front of the head is from a WWE wrestling figure, though I can't remember the name of that one. The face was resculpt and molded on the back of the head, colour matched and then the hair was sculpted. The tie was then sculpted and added. The hands are also from the Gladiator figure. Morgan Freeman should have been turned into a decent toy by some company by now but alas, only Kenner's Robin Hood line, which is rubbish. This custom is pictured with my Bruce Wayne custom. Check out my other Batman Begins and The Dark Knight customs by clicking on my profile.](userimages/customs/23000/22812-1.jpg) Lucius Fox Batman Begins the Dark Knight Movie Mastersby DaxceonThe head ball joint and back half is from a Gladiators Predator action figure. The front of the head is from a WWE wrestling figure, though I can't re...2 comments | ![[Batman Begins Bat Cave Diorama] A Diorama made from wood card, paint and various items taken from a number of toylines. Batsuit cupboard is made from a Movie Masters Batman and an Angel Toyline cupboard, heavily altered and paintd with Batman's many tools created and added to the doors. This custom diorama is based on the higher level area of the Bat Cave seen in Batma Begins, the arches are representative of the foundations of Wayne Manor with the rest of the cave depicted beyond them by a flat image. Pictured with my custom Bruce Wayne and Alfred figures.](userimages/customs/23000/22779-1.jpg) Batman Begins Bat Cave Diorama Movie Mastersby DaxceonA Diorama made from wood card, paint and various items taken from a number of toylines. Batsuit cupboard is made from a Movie Masters Batman and an An...4 comments |
![[Bat Signal, Batman Begins, the Dark Knight Diorama] A Bat Signal made out of card, plastic, paper, superglue and paints. It was designed to fit with the Mattel Movie Masters line and can be fitted with a LED Tea light for actual projection. I built it to fit with other dioramas I have built for the Movie Masters line. It is pictured here with my custom Gordon figure also viewable on here.](userimages/customs/23000/22778-1.jpg) Bat Signal, Batman Begins, the Dark Knight Diorama Movie Mastersby DaxceonA Bat Signal made out of card, plastic, paper, superglue and paints. It was designed to fit with the Mattel Movie Masters line and can be fitted with ...4 comments | ![[James "Jim" Gordon - Batman Begins - the] The head is a heavily resculpted Sheriff of Nottingham figure from the BBC Robin Hood Character Options Toyline. Beard sanded away and hair sculpted on top of the balding hairline of the figure. The glasses were added from a Buffy toyline, cut to fit the style used in the film.
The body is from a Joker as a Gotham City thug figure from Mattel Movie Masters. The Shirt was painted white and a tie was added.
The figure fits with the Movie Master line.](userimages/customs/22500/22133-1.jpg) James "Jim" Gordon - Batman Begins - the Movie Mastersby DaxceonThe head is a heavily resculpted Sheriff of Nottingham figure from the BBC Robin Hood Character Options Toyline. Beard sanded away and hair sculpted o...2 comments |
![[Ra's Al Ghul - Liam Neeson - Batman Begins] A Gotham City Thug figure from the Mattel Movie Masters Line with its neck tie removed. The head is that of Christopher Eccleston as the 9th Doctor from the "Doctor Who" "Character Options" toyline. The head was scuplted with a new Hairline and beard, cut and hollowed out to fit the ball joint neck of the Movie Master body. The walking stick is also custom made by me and has a hidden blade as it does in Batman Begins.](userimages/customs/22500/22105-1.jpg) Ra's Al Ghul - Liam Neeson - Batman Begins Movie Mastersby DaxceonA Gotham City Thug figure from the Mattel Movie Masters Line with its neck tie removed. The head is that of Christopher Eccleston as the 9th Doctor fr...0 comments | ![[League of Shadows Member - Batman Begins] Using a spare Movie Masters Batman Begins Batman figure I rescuplted the torso and sculpted a new head based on the uniform worn by the League of Shadows Members during the third act of Batman Begins. I also built a custom scabbard for a sword I sourced from the "Serenity" "Mal Reynolds final battle" action figure. I added a dry brush paint job finish to differenciate it from the Begins Batman. The Shoulder pads are from the 4 inch Batman Begins Henri Ducard figure.
Side Note: As with my original Begins Batman Movie Master figure, Fear Toxin Batman and Survival Suit Bruce Wayne, I added half a cm in height to this figure at the waist to make it fit more uniformily with the rest of the Movie Master line. This was due to the Begins sculpt being a shade shorter overall.](userimages/customs/22500/22104-1.jpg) League of Shadows Member - Batman Begins Movie Mastersby DaxceonUsing a spare Movie Masters Batman Begins Batman figure I rescuplted the torso and sculpted a new head based on the uniform worn by the League of Shad...2 comments |
![[Alfred - Batman - the Dark Knight] A quick custom using a Gotham City Thug body with an unchanged head from a "John Anderson" figure from the "Character Options" "Gladiators" Toyline. Shirt retouched and tie added new hands replaced gloved thug hands. I found the Anderson by chance and noted that it looked remarkably like Michael Caine. This figure fits with the rest of The Dark Knight Mattel Movie Master toyline.](userimages/customs/22500/22085-1.jpg) Alfred - Batman - the Dark Knight Movie Mastersby DaxceonA quick custom using a Gotham City Thug body with an unchanged head from a "John Anderson" figure from the "Character Options" &qu...3 comments | ![[Nurse Joker - Batman - the Dark Knight] The torso and thighs of a 5 inch "Weevil" for the "Torchwood" "Character Options" toyline. The neck ball joint, head and shoes from a "Jail Cell Joker" from Movie Master. The arms of Nicole Sanders "Heroes" figure. Legs from "Altas" "Gladiators" "Character Options" toyline. Legs scuplted into a long gown worn by Joker in his meeting with Harvey Dent in the hospital scene from The Dark Knight. Figure includes silenced handgun and detonator and fits the Mattel Dark Knight Movie Masters scale.](userimages/customs/22500/22083-1.jpg) Nurse Joker - Batman - the Dark Knight Movie Mastersby DaxceonThe torso and thighs of a 5 inch "Weevil" for the "Torchwood" "Character Options" toyline. The neck ball joint, head and...2 comments |
|