![[Beastman] Thanks to all you who helped to inspire this set and now I bring you Beastman another of his main evil henchmen. I have seen this receipe before, but tried to do something different by making my own color for his fur, so it wasn't the same as the sasquatch fur. Lets just say to get that color it took 5 different colors and endless mixing and studying, hope it turned out ok. I also sculpted the braclets and shin pads and used rawhide/jewelry cord as his straps for his guards. As ususal comments, criticism and views appreciated and hope you look forward to more when I finish some more. I have more motu, marvel and dc coming after a short break. Thanks to all of you on the realm for being great and inspiring.](userimages/customs/31000/30846-1.jpg) Beastman | ![[Tri-Klops] Still wanted to thank everyone on the realm that created a motu custom that helps to inspire my collection. I saw this receipe when I first started and it was one of my originals and hope it pays homage to madtinker, cerebus, windblock and arez, who helped to originate this. I used a Conan body and added the Tri-Klops 200X parts. I thought the head would be more complicated but after you take it off it seperates and I made the bottom attach to the neck joint and glued the top to the mid-section which is stationary and kept the visor movement. I mixed my own orange for the armor and will use it for a few of my future motu customs. Had to sculpt the back part of his harness since it was attached to the 200X fig. I will be doing a dc version of him, because I do not like the knife/dagger. Kept it anyway, since I had nothing I could think of to replace it with. As usual comments, criticism and views appreciated and thanks to all you on the realm you rock.](userimages/customs/31000/30845-1.jpg) Tri-Klops |
![[Skeletor] I just want to say that these were inspired by many different customizers on the realm MadTinker, Cerebus, Windblock, AREZ, crisco, speedlee, jin saotome (of course), darththomas, zombieforhire, crimsonvampyre, hunterknightcustoms, issiam98, customs130, argenta2008, bobtheodd, e-freeze, pulpy fiction, custombase and there are probably more I am forgetting but wanted to say thanks to everyone for the inspiration. Well I finally started to finish some of my first customs ever and the start of the series is He-Man. I used a Wrarrl as the base and added the feet of a face off sabertooth, with the finishing touches of a 200X Skeletor. I gave him a Keldor head by using a Ripclaw head I had. I used a mix of citadel and games workshop paints on the fig, but had to make my own blue for the skin. I call it enchanted ice it is a mixture of enchanted and ice blue, it makes me think of his color in the 200X comic. I have plans of making multiple version of skeletor, so I will definitely have o](userimages/customs/31000/30818-1.jpg) Skeletor | ![[He-Man] I just want to say that these were inspired by many different customizers on the realm MadTinker, Cerebus, Windblock, AREZ, crisco, speedlee, jin saotome (of course), darththomas, zombieforhire, crimsonvampyre, hunterknightcustoms, issiam98, customs130, argenta2008, bobtheodd, e-freeze, pulpy fiction, custombase and there are probably more I am forgetting but wanted to say thanks to everyone for the inspiration. Well I finally started to finish some of my first customs ever and the start of the series is He-Man. I used a Savaged Dragon upper and elongated the torso, used the Wrarrl lower half till the calves and boots which were supplied by Conan. To finish the receipe I used the He-Man parts from a 200X figure and sculpted the gauntlets. I repainted the sword, harness and loincloth. I used citadel dwarf flesh after making the mistake of using games workshop version, which would never adhere properly and gave me fits. I used a mix of citadel and games workshop browns, silvers and](userimages/customs/31000/30817-1.jpg) He-Man |
![[The Incredible Hulk BAF] This is another Hulk to go along with my Hulk collection and this ones BAF size. Thanks to Stevid for some help with getting new parts to help and make the others that will go along with this line of Hulks, that are BAF size. I am currently still working on these projects so I completed this to make room. I used a Pitt BAF for the base and added a Juggernaut Marvel Select Unmasked head, the head did not fit, so I added apoxie to the head to secure it, and it still stays tight not loose. Resculpted the forearms, sanded down the fingernails and toenails and rescultped them also. I started with a base coat of Model Masters Flat Black and painted Citadel Snot Green overtop, then a wash of Games Workshop Dark Angelus Green and finally a dry brushing of snot green again. I used Games Workshop Liche Purple for the pants.
This is one of my favorites so far and like how it works in line with my Avengers and will base a lot of them off this fig (along with a few others), I am using a mix](userimages/customs/30500/30360-1.jpg) The Incredible Hulk BAF | ![[The Flash] Another one of my favorite characters of all time and seeing Loosecollector doing the TV series version made me remember what started it all. I did fill a bit intimidated since both Jin and Loosecollector recently made their own versions of Superman and Flash since I know I don't have their skill. I just hope I do the characters justice. I used my usual Sentry base with the DC Flash head, while removing and using the wings from the boots. I sculpted the chest emblem and all the lightning around the arms and waist, not forgetting to fill in the holes due to removing the cape and belt. I used my usual Model Masters Flat Black for a base coat and used the same brands Guards Red. I used GamesWorkshop Golden Yellow for the boots and lightning, finally Citadel Skull White for the emblem. Thanks for any comments and views, it was helps drive us all.](userimages/customs/30000/29959-1.jpg) The Flash |
![[Superman] This is a figure I wanted to finish as soon as I started my DC line, but had to re-sculpt the chest. I really love the bigger look of the Savage Dragon/Wrarrl and want to work on another version in the future, but I also wanted to make a Supes that fit in with the
same size of my other DC figs. Well to start I used a Sentry body with a DC Superman head along with another 2 pack version cape (it came with Lex Luthor Power Armor. I sculpted the chest symbol, fix the holes in the body and finally finished with the boot tops. I fought a long time over the colors and finally went with a base layer of Model Masters Flat Black, followed by GamesWorkshop Enchanted Blue, GamesWorkshop Golden Yellow and used Model Masters Guards Red. I started using GamesWorkshop paints in the beginning, but like the Citadel and Model Masters better, they tend to show and seal better. I would love to try and work with the P3 paints Jin talked about, but have not tried them yet. Would love to hear any comm](userimages/customs/30000/29958-1.jpg) Superman | ![[Hulk Dark Green Skin] I would like to start out and say that all of my Hulks come from my love of the character but also some of the best customizers on the net inspiring me with Hulk customs such as MadTinker76, Anthony, Jin, Stevid, Fast Freddy, Jade Jaw along with many others Loose collectors Pitt sized McFarlane was awesome, I hope I did not leave anyone off everyone here is inspiring so please help add to the awesomeness which is the realm. So thanks to all you who make this worth while and when I am done with my Marvel collection please be sure MOTU is coming. This is a Planet Hulk that I added a Face Off head to, while filling in all the peg holes. I sculpted the ripping of the pants at the top of the waist, bottom of pants then sculpted up the trap muscles, since I was impressed by anthony's customs looking so sweet and tried to give him more of a realistic than cartoon look with the paint. I started with dark angels green then finally snot green finishing, I thought this gave a nice interesting](userimages/customs/30000/29943-1.jpg) Hulk Dark Green Skin |
![[Hulk Light Green Skin] I would like to start out and say that all of my Hulks come from my love of the character but also some of the best customizers on the net inspiring me with Hulk customs such as MadTinker76, Anthony, Jin, Stevid, Fast Freddy, Jade Jaw along with many others Loose collectors Pitt sized McFarlane was awesome, I hope I did not leave anyone off everyone here is inspiring so please help add to the awesomeness which is the realm. So thanks to all you who make this worth while and when I am done with my Marvel collection please be sure MOTU is coming. This is a mix of the War Hulk upperbody and head mixed with the lower half of the House of M Hulk. I did not like the way the legs of the War Hulk bent over and did not allow him to stand as straight as I would like, so I replaced them with the more poseable HoM legs. Unfortunately I did not want to open the chest to take out the peg, so I ground it down until it no longer poked out too far. I sculpted the ripping of the pants at the top of](userimages/customs/30000/29942-1.jpg) Hulk Light Green Skin | ![[Incredible Hulk BAF] The Hulk Collection I am working on is based on many different customizers works and inspiration and I hope I did it justice. I used the Hulk 2 Pack figure with Valkyrie and used the Red Hulk head, I sanded it down and then sculpted the hair to make a mix of the comic, marvel vs capcom/mugen and the new avengers cartoon series. I like to make a mix of these styles to get the exact fig since hasbro nor toy biz ever got it exactly right. I mixed the paint for both the Hulk and Dr Doom I call it Scorpion Snot since it is a mix of Scorpion Green and Snot Green. Comments and Views welcome thanks for the support.](userimages/customs/30000/29909-1.jpg) Incredible Hulk BAF |
![[Mr Fantastic Reed Richards] Mainly another repaint to fit in with the FF4 set I am trying to make, still working on the Thing and Human Torch. I saw many people working on this base fig to make other customs and have been very impressed, also surprised that I had no paint chipping/cracking with the paint or sealing of the fig. Comments and views are very appreciated.](userimages/customs/30000/29908-1.jpg) Mr Fantastic Reed Richards | ![[Captain America] This is a basic fix I have seen before, use the unmasked version with the ML series 1 head. I then repainted the blue and then went through and repainted the entire stripped waist the opposite (the red should start in the middle). I then repaint the boots and gloves and touched up the white. His basis was a mix of comic, marvel vs capcom and the new avengers cartoon. thanks for looking and comments.](userimages/customs/30000/29875-1.jpg) Captain America |
![[Dr Doom] This is a pretty basic figure mainly a repaint but you have to have a Doom in your collection. This is partly based on a mix of the comic with marvel vs capcom. when or if I get some energy accessories I will add to the fig for more evil posing. thanks for looking.](userimages/customs/30000/29874-1.jpg) Dr Doom | ![[Invisible Woman Sue Storm-Richards] For this fig I used the box set Sue Richards and the Powergirl head and gave the fig a repaint to correct the dark ugly blue that was on the fig to a more comic/cartoon representation. I am still looking for another head to add to be able to have a long haired version and maybe a medium if able. Thanks for the support.](userimages/customs/29500/29122-1.jpg) Invisible Woman Sue Storm-Richards |
![[The Crow] This fig was made for a present and was to represent both the movie and the comic version. I used a jigsaw base fig with resculpted the chest and neck, added a longshot head with added hair, angel marvel legend forearms and ghost rider/cannonball boots. the crow is made from a falcon from the marvel legend. Used apoxie clay, citadel, model masters paint for the details of the fig. I hope to one day make another that is more like the movie version with the jacket and better accessories if able to find some of the mcfarlane figs. thanks for the views and comments and the inspiration to do what I do, thanks.](userimages/customs/29500/29121-1.jpg) The Crow | ![[Commando Snake Eyes] HI and welcome to the real commando snake eyes, just my dumb mistake so sorry. well I used as usual a black panther for the base and sculpted all the details except his belt, I did sand down the feet this time to look more like boots (and along as my other snake eyes I cut off the black panther claws). I added a gun on one side, a knife on the other, added a magnet to allow either his sword alone to be held or his backpack. The backpack has a magnet on each side making weapons interchangable and future upgrades. Snake Eyes is equipped not only with his gun, knife and sword, but has an uzi, nunchucks and a few other (but was unable to locate them for the shoot, however I have been thinking of making a photobucket account so I will be able to show off more pics and upgrades. thanks for your time, comments and views. I will be taking some time to work on more figs in the future and will contine to look comment and can not wait to submit some more when I complete them.](userimages/customs/28500/28302-1.jpg) Commando Snake Eyes |
![[Storm Shadow] I used a sentry as a base fig and sculpted the face, chest strap, ninja suit seam, belt (added psylocke sash to belt) and finally lower legs with ninja toe. I did the same thing of adding a magnet to allow a removalbe weapon system. The backpack is a legolas quiver with his arrows and used swords from hand ninjas in the slot they happen to fit (however one does get a slight bend, but nothing that can't come out). His other weapons are some swords from a MK or GI Joe fig, sais from an Electra Select fig, I believe the staff is the same and the bow came from a mcfarlane fig do not remember name. I used citadel white and dwarf flesh to give a darker skin tone and painting the symbol is not 100% accurate I did the best I could, I was wondering though about using those sticker decal printing programs and their material, would that be able to print a 100% accurate one and would it fit on the fig well without looking just like a sticker on a fig, maybe using a hair dryer to contour better](userimages/customs/28500/28301-1.jpg) Storm Shadow | ![[Green Lantern] Started with a sentry body and added the dc universe hal jordan head and hand. Sculpted the emblem and filled in holes in sentry body and of course sanded down the joints and painted with games workshop and citadel paints. I have in the works other dc figs flash is the next one but most of the main jla I would like to complete. Comments views always appreciated. Thanks.](userimages/customs/28500/28273-1.jpg) Green Lantern |
![[Snake Eyes] Used a black panther and sculpted the mask, chest strap and details, arm and leg bands, wrist gauntlet (added nail into it to function as arrow). Added gun on one side but never found that perfect piece to fit the other, then added magnet on chest strap to hold sword and scabbard. Painted with multiple shades of black and gray along with washes to get desired effect also boltgun metal for the metallic parts. I also have another version of snake eyes the commando version and a storm shadow which I will post later. I have a few other gi joe customs but know of one definitely I am still working on and deciding if I have the parts or they are able to be made to really represent the character. Views and comments always appreciated. Thanks for the support.](userimages/customs/28500/28272-1.jpg) Snake Eyes | ![[Backlash His Daughter from the Future] I started off with Psylocke and sculpted the face, chest strap, leg strap and arm gauntlets (which allowed her to have tentacles similar to her father, her ability was super speed). The backstory on this character was a brief part in the future reflecting on the past where someone betrays her father and kills him. She is an mercenary and goes through an entire complex of coda warriors and kicks their you know what and then escapes. I really liked the concept of this character and had to make her. I am working on the rest of the Backlash crew including a young Crimson (Backlash's daughter) and Taboo. I have enclosed a reference pic to show the comic she first appeared. I was hoping to be able to make the tentacles but have not found suitable pieces to represent the piece for I need blue and yellow tentacles since he had both. I failed to mention on all my customs before that I sand down the joints for paint rub, paint all my figs with games workshop, citadel and model masters pain](userimages/customs/28500/28252-1.jpg) Backlash His Daughter from the Future |
![[Backlash] This is one of my all time favorite characters mix spiderman, wolverine with omega red like tentacles along with the ability to turn to mist and you have the alien warrior backlash. I used the bullseye body then sculpted with apoxie the face, hair, chest straps, belt (added fodder strap for extra belt piece) and leg strap & pouch. I was hoping to be able to make the tentacles but have not found suitable pieces to represent the piece for I need blue and yellow tentacles since he had both. I failed to mention on all my customs before that I sand down the joints for paint rub, paint all my figs with games workshop, citadel and model masters paints and seal with testors dullcote.
Well thanks to MercuryArtStudios and other customizers to get me to the point where I could make these tentacles and they are interchangable, with either color by drilling a small hole in the hand to secure it. The tentacles are figure twisty ties painted with clear or inks, and I had no problem with pai](userimages/customs/28500/28251-1.jpg) Backlash | ![[Deadpool] I know everyone has to make a deadpool, but I enjoy seeing them (personally you also see a lot of snake eyes but both are like ice cream just enjoy them). I used the Moon Knight body and sculpted the details on him and added the scabbard set with guns from the Deadpool legend. The set is removable with a magnet added to the chest strap. I am planning on making another deadpool with an arsenal but have not gotten all the pieces but wait to work on the project. thanks for the support.](userimages/customs/28500/28232-1.jpg) Deadpool |
![[Morg Herald of Galactus] This is another of Galactus's Heralds Morg. He is one of my favs cause he was just totally insane and caused some great battles, however he did kill Nova and I did like her. Like I mentioned before I am working on a line, may not get to do all the Heralds, but as many as I can. I used apoxie to sculpt the hair, armor and bumps on the body. I used the axe from conan and poster putty to help them hold the weapon. Thanks for the views and comments.](userimages/customs/28500/28231-1.jpg) Morg Herald of Galactus | ![[Terrax Herald of Galactus] This is my line of heralds for galactus, I am currently working on some and some are still just visions. I used apoxie for the sculpt and a bbq pick for the staff and sculpted the bladed parts. When I have all my heralds complete I will post a pic of the collection. Thanks for the views.](userimages/customs/28500/28226-1.jpg) Terrax Herald of Galactus |
![[The Incredible Hulk] This figure was made to replace my hulk in the marvel universe line. I did not like the color or the slumped look he had, so I built him up. I used apoxie on the chest and neck to build up the muscles and base for his head. I attached the head using a magnet so later I can add new heads to the fig (I saved that for a later date). This is one of my first customs and have been working on more and hope to post when I can. Thanks to all of the fellow cusotmizers on the realm who inspired me which are to numerous to name but everyone has inspired me to work on what I can.](userimages/customs/28500/28224-1.jpg) The Incredible Hulk | |
|