![[Vlad Vol. II] Me again! Accompanying Cassie this time around is, of course... Vlad.
A resculpted video game Hulk head on a modified Clownface chassis. Belt is foam and styrene. Added LBCH Marv's hands and repainted. I try to experiment and try new stuff so I made an interchangable hood. Also HAD to make the steel cleaver and butcher knife. What do ya think?
Keep on Blastin
T](userimages/customs/33500/33467-1.jpg) Vlad Vol. II Hack / Slashby ole jade jawMe again! Accompanying Cassie this time around is, of course... Vlad.
A resculpted video game Hulk head on a modified Clownface chassis. Belt is foa...11 comments | ![[Cassie Hack Vol.II] Hey all, I present my second take on one of the most hard azzed chicks in comics...Cassie Hack. I wanted to do another version that was much less cartoony and conveyed her edginess.
Base was some older wwe lady. I cut her legs about 3/8" shorter and added swivels at her ankles and thighs. Crow boots with sculpted socks. Big barda head with sculpy hair that I then casted. Legacy Joker coat and arms. Stocking for the mesh top, some styrene, a bit of sculpt, some odds and ends for detail and a whole new paint scheme. In OJJ tradition, she also swings a real ash bat. What do you think? Comments, critiques?
Thanks for checking her out and Keep on Blastin!
T](userimages/customs/33500/33466-1.jpg) Cassie Hack Vol.II Hack / Slashby ole jade jawHey all, I present my second take on one of the most hard azzed chicks in comics...Cassie Hack. I wanted to do another version that was much less ca...8 comments |
![[Wolverine: the Best There Is] I present to you... Wolverine, the best there is. This is from the comic series of the same name, and the only Wolvie title I currently read. If you haven't been reading it, it's darker, more gritty and geared towards mature readers. After being tortured so badly that his healing factor could barely repair him, Dazzler came up with this outfit until he felt like himself again.
DCU jack night lower body, stock DDCU upper body, (I think it was Wildcat) and an old DCD Ras al ghul altered head. The steel claws are as short as I could go before they looked too stumpy to me. Besides, nobody draws them realistically anyway. I had fun with this one. It gave me a chance to do a Wolverine, but a totally different one than anyone has done.](userimages/customs/33000/32578-1.jpg) Wolverine: the Best There Is Marvel Legendsby ole jade jawI present to you... Wolverine, the best there is. This is from the comic series of the same name, and the only Wolvie title I currently read. If you...14 comments | ![[Commando's Captain Bennett] I'M NOT GONNA SHOOT YOU BETWEEN THE EYES JOHN. I'M GONNA SHOOT YOU BETWEEN THE So I present to you, Ex-captain Bennett. With Commando in the display case, I realized I was missing what every good hero needs. Theme music, no, the villian. Duke Nuke em base with a John Cena head modded to slightly resemble Vernon Wells. (maybe, just a little?) Cargo net kinda shirt thing is a knee high stocking, (thanks wifey for that idea, and for coming with me to buy it) I plumped up the mid section of the base fig and made the holster, sheath and yes, another knife.
What I learned: not being very artistic, I quickly realized how hard it is to sculpt a real human face from a photo. I think I got a few key features on there though.
Thanks for checking it out. How'd I do? Keep on blastin' T](userimages/customs/33000/32577-1.jpg) Commando's Captain Bennett Commandoby ole jade jawI'M NOT GONNA SHOOT YOU BETWEEN THE EYES JOHN. I'M GONNA SHOOT YOU BETWEEN THE So I present to you, Ex-captain Bennett. With Commando in the display ...22 comments |
![[J.L.I . Files: Halloween '87' (a Tribute to Blue ] O.K. Nothing serious here. (nor should there be with these two) I had this Thing figure sitting in the bin for a while and I always thought it looked like a rubber mask. Remember those wonderfully crafted costumes that accompanied the Marvel movies? Well, inside all day during a hurricane and I thought this might bring a chuckle to those that remember these guys. For those that missed the 80's JLI books, that was some fun stuff. As this is not exactly a contender, nothing was done to the figures because they went back on the shelf after the pictures. Kinda hope I'm not the only one that thinks this is humorous....](userimages/customs/32500/32290-1.jpg) J.L.I . Files: Halloween '87' (a Tribute to Blue DC Universeby ole jade jawO.K. Nothing serious here. (nor should there be with these two) I had this Thing figure sitting in the bin for a while and I always thought it looke...13 comments | ![[John Matrix Commando] Hey all. I am very proud to present ... John Matrix. Let me start by saying , I may have gotten a little too into this one. The base is a neca guile bottom half, a wwe deluxe aggression top half with a casted T-800 head. He has a second right hand for versitility of holding stuff. All three hands were from different figures. I had to alter 2 of them to resemble each other. The vest is Sam fischer's vest cut down the middle, with Duke Nukem's straps added to it. M-16 is DCUC Vigilante's with the scope cut off. The steel knife, shotgun, granades, rocket launcher, sheath, holster and duffel bag are all hand made from a lot of different materials. I had a blast delving into the different modeling aspect with all the gear. The body is base painted solid with a wash of brown pastel to add the realistic effect.
A thanks goes out to Cosmic. After a sneek peak, he pointed out that Matrix needed his watch. (He didn't have one at the time) Please note that the last pic should read](userimages/customs/32500/32063-1.jpg) John Matrix Commando Commandoby ole jade jawHey all. I am very proud to present ... John Matrix. Let me start by saying , I may have gotten a little too into this one. The base is a neca gui...17 comments |
![[Tyrannus] I proudly present... Lord Tyrannus. Blue Devil base, removed the boot and glove cuffs, reduced the suspender/strappy things and added cord the make the termination of shirt. skirt and belt are foam, buckle/emblem is hand made from styrene and sculpt and wristbands are sculpt and rubber o rings. Brian Pillman head's heavily altered, and Dr. Impossible cape. I went all the way to photographing with the head the way it was in the small, inserted picture and realized "angry" was not what I had. So I added a bit in the corners of the mouth and some to the cheeks and completely changed the dynamic of the face. Talk about an eleventh hour improvement. A thanks goes out to Cosmic for the kick in the pants I needed to start planning this guy. All in all, I'm psyched with the way this came out. How'd I do? comments?
Keep on blastin!
T](userimages/customs/31500/31457-1.jpg) Tyrannus Incredible Hulkby ole jade jawI proudly present... Lord Tyrannus. Blue Devil base, removed the boot and glove cuffs, reduced the suspender/strappy things and added cord the make t...9 comments | ![[Father Wrath] Presenting...Father Wrath, undead slasher from Hack/Slash. Serial killer of sinners and forna...teens entertaining each other. Sculpted mask and hair. Shaved off the regular collar and added the priest collar. weapon comes from some Buffy guy and special thanks to Ozzy for donating the chain and cross.
Not a crazy amount of work here, but believe it or not, I hade to repaint the face a few times to get "empty, dead mask". I kept ending up with "clown with pink eyes". I did heat, open up and cool the jacket to get a less buttoned, more casual look.](userimages/customs/31500/31456-1.jpg) Father Wrath Hack / Slashby ole jade jawPresenting...Father Wrath, undead slasher from Hack/Slash. Serial killer of sinners and forna...teens entertaining each other. Sculpted mask and hai...7 comments |
![[Red Hulk] Hey Guys, I present... Red Hulk. Don't have big love for the character, but when I first saw the Neca Akuma head, I new it had potential. Top half is video game grey hulk and bottom half and head are Akuma.(Head cast actually) Added a bit of sculpt to widen the jaw line and thicked the legs. base painted german grey, and drybrushed a bunch of coats of red. Dull coated to finish. It would have been nice to do a legends scale one, but the size of the head limited me to this smaller scale. I'm satisfied with it. How'd I do? comments?
Keep on blastin!
T](userimages/customs/31500/31441-1.jpg) Red Hulk Incredible Hulkby ole jade jawHey Guys, I present... Red Hulk. Don't have big love for the character, but when I first saw the Neca Akuma head, I new it had potential. Top half ...3 comments | ![[Armageddon] I proudly present to you...Armageddon, Warlord of the Trojan and vengeful father of the late Trauma.
It is awesome but entirely coincidental that as I finish this custom, he makes his return to comics after almost 20 years. I think the Arkillo base makes for a nice hulky sized villian. (sorry Pulpy?) This guy took a while. Casted a Hulk "the End" head and modified it, sculpted all the armor and used styrene for all the steel pieces. The cannon came from some cheesey Terminator fig. It is the closest I could get the an accurate looking one. The cloak/sash was a vinyl sign, a heat gun and 10 very burnt fingers. Finished with a bunch of assorted paints. It took like 6 coats of that purple to look solid. Well, I like it. How'd I do?
Keep on blastin'
T
p.s. If I needed a name for them, I call the 2 consecutive pictures "anguish turns to anger." 90's Hulk fans should remember the scene I was referencing.](userimages/customs/31000/30874-1.jpg) Armageddon Incredible Hulkby ole jade jawI proudly present to you...Armageddon, Warlord of the Trojan and vengeful father of the late Trauma.
It is awesome but entirely coincidental that as I...11 comments |
![[Jen Walters She-Hulk] I present to you...Jennifer Walters, The Sensational She-Hulk. This is a project I started a while ago because i didn't have anything else on the chopping block. I only have the foom Shulkie and all the others seem to be generic one piece outfitted figures. I wanted to do something a bit more John Byrnes styled. The concept changed a few times along the way. At first, She was going to be in undies, but I was looking at the Sideshow statue and decided to go with something like that.
Wrestling chick base with a Kingdom Come Jade head and C. Viper shoes. I added the upper boots, bra, and shirt. The belt is foam, the buckle is wire and the skirt is a dollar store pool float. That worked well, you just have to sand it and coat in thin layers. I threw in the last pic to show the way the vinyl lays on her butt. I really think it looks great as a skirt.
How did I do? comments?
Keep on blastin!
T](userimages/customs/30000/29883-1.jpg) Jen Walters She-Hulk Incredible Hulkby ole jade jawI present to you...Jennifer Walters, The Sensational She-Hulk. This is a project I started a while ago because i didn't have anything else on the cho...8 comments | ![[The Weaponer of Qward] I present to you...The Grand Weaponer of Qward. I really like the current revamp of the character. This guy leveled Hannu and a lot of members of green and yellow all at once. HE IS BAD AZZ!! He towers over the other GL figures, but he is supposed to. He's enormous!!
The wrestler base has some sculpt, some foam, some oddball accessories and a bunch of paint. The hammer is sculpy and a dowel. The shield is apoxie over a figure stand that I shaped to clip on to the wrist. Admittedly, after I started this, I realized I was a bit over my head but I think I pulled it off pretty well. What do you guys think? Comments?
Keep on blastin
T
Update: replaced shield clip with a strap and blackened the eye holes.](userimages/customs/30000/29881-1.jpg) The Weaponer of Qward Green Lanternby ole jade jawI present to you...The Grand Weaponer of Qward. I really like the current revamp of the character. This guy leveled Hannu and a lot of members of gr...5 comments |
![[Trauma of the Trojan] I present another great character from the famed Peter David run... Trauma (deceased) is
an Arkillo base with an "End Hulk" head cast. This was my first head casting, so there's a milestone for me. The blades are hard plastic, cut and shaped, there's a bit of nylon cord, some foamies and the rest is sculpt. After I finished, I found this lotr monstery looking thing (hand prints all over it) and thought it would be perfect for a bare head. Turns out, I sculpted over pretty much the entire thing, added teeth to match the other head and clipped a bit of hair from my dog.(tee hee) I even threw in a referance pic for those not familiar. I really enjoyed making this one. Thanks for taking a look. How did it come out? Comments?
Keep on blastin
T](userimages/customs/29500/29325-1.jpg) Trauma of the Trojan | ![[Janis Jones] I present, From Future Imperfect fame, Rick Jones' grand daughter Janis. Psylocke base with a Black Canary head. I Balded, resculpted hair and added C. Viper's braid. The tunic is sculpy III and bracelets are rubber o rings. I Added sculpt for boot tops and arm band. I went with a dirty, dystopian look with the paint. Not terribly intricate but I think it represents well. Thanks for checkin it out. How'd I do? Comments?
Keep on blastin,
T](userimages/customs/29500/29324-1.jpg) Janis Jones Incredible Hulkby ole jade jawI present, From Future Imperfect fame, Rick Jones' grand daughter Janis. Psylocke base with a Black Canary head. I Balded, resculpted hair and added...8 comments |
![[Speedfreek] Heeeeere's Speedfreek. A short lived, two bit, twisted villian that actually put a cuttin' on the hulk and was integral in the last days of Jim Wilson. That said, I decided he needed to be immortalized as a figure. Body is an unknown wrestler, with Iron Man waist, arms and legs. Making the arms fit was a trick. You can see how much I had to cut out of the chest/shoulders. A Spidey classics Green Goblin provided the head, on which the helmet and goggles are sculpted. Hair was from DC Harbinger (I added some volume) and Torch donated his hands. Boot/thrusters and forearm pods are sculpted and the blades are real steel. I used some wire and cord to add some extra details. Totally Painted with several coats of Tamiya Titan silver. Each coat had a different amount of blue added. I was working on this when this contest came up and I figured I'd get involved. Enjoy!
P.S. I added a ref. pic for those unfamiliar.](userimages/customs/29000/28790-1.jpg) Speedfreek Incredible Hulkby ole jade jawHeeeeere's Speedfreek. A short lived, two bit, twisted villian that actually put a cuttin' on the hulk and was integral in the last days of Jim Wilson...1 comments | ![[Valient's Archer & Armstrong] I present to you...Archer & Armstrong. MAN! These guys were a pain! Armstrong: Sculpted hair and the hat, replaced arms with Sin City Marv's and random hands (don't remember where from.) Most commonly, when I interchange parts, I use cut-down stainless steel ring nails as posts. These have worked well so far. The "skids" (balloon/ pajama style pants, for all you youngins) were sculpted with a piece of cord added. The undershirt has metal wire at the edges to define it. The Marv coat had to be altered. I cut 1/4 inch out of the width and 3/8 inch from the height just below the shoulders and apoxied it back together. Needed to add latex to the paint and it is still fragile because the rubber coat is so flexible. The prop wine bottle is just a quickie I made out of sculpy.
Archer is a Torch body legs and head, with Savage Dragon waist and some Avatar figure arms. The head was balded and added to for that giant forehead. I also sculpted laces onto the boots to t](userimages/customs/29000/28622-1.jpg) Valient's Archer & Armstrong Valiantby ole jade jawI present to you...Archer & Armstrong. MAN! These guys were a pain! Armstrong: Sculpted hair and the hat, replaced arms with Sin City Marv's a...3 comments |
![[Gilad the Eternal Warrior] I present to you...Gilad the Eternal Warrior. I was explaining this customizing thing to one of my closest buddies, and he said he wanted one. After a moments thought he came up with this 20 year old character. He had no idea I was already working on his brother Armstrong. How's that for coincidence? Great minds... huh? He is a Winter Soldier body with Mr. Terrific arms and gloved hand, jacket from a Terminator Salvation Marcus, one random left hand, Longshot (after loosecollector) head with Winter S's hair. I drilled in and burried brad nail tips in the glove for the spikes and the arm armor is 14 guage wire cut, filed and sanded. I didn't want to make a fig. with no sculpt, so I added another strap to each boot. I even gave up the shotgun from my personal Deathstroke. Besides that I really tried to give it a "top of my capability" paintjob. (I even painted and sealed the guns) So this guy's off to make his home in southern Florida.
How'd I do guys? comments?
Ke](userimages/customs/29000/28583-1.jpg) Gilad the Eternal Warrior Valiantby ole jade jawI present to you...Gilad the Eternal Warrior. I was explaining this customizing thing to one of my closest buddies, and he said he wanted one. After...6 comments | ![[Half-Life] Hey all. I present to you Half-Life, an old villian of the Hulk's. Started with a judge Death figure and added a modified Elongated man head. Truth to tell, this looked a bit cooler in my head. Still trying to improve my painting skills. But alas...I have another hulk character for the display case.
How did I do?
Keep on blastin
T](userimages/customs/28500/28184-1.jpg) Half-Life Incredible Hulkby ole jade jawHey all. I present to you Half-Life, an old villian of the Hulk's. Started with a judge Death figure and added a modified Elongated man head. Truth...0 comments |
![[Korg of the Warbound] I prestent to you...Korg of the Hulk's Warbound. This is nothing original but I wanted... no needed one for myself. In an effort to add something of my own, I moved the head up so it would sit above the shoulder pads. With Loose's Korg as inspiration, I made a head from scratch. I went with a Planet Hulk movie style (a lot less detail.) The pads themselves were tedious. I cut the shapes from clear acrlyic sheets, bent and shaped them, sculpted the collar the join them together and the padded additions are foamies with sanded corners so as not to be sharp edged. The 4 yellows over 5 or s 6 drybrushings. I really enjoyed this one.
How'd I do?
Thanks and Keep on blastin!
T](userimages/customs/28000/27948-1.jpg) Korg of the Warbound Incredible Hulkby ole jade jawI prestent to you...Korg of the Hulk's Warbound. This is nothing original but I wanted... no needed one for myself. In an effort to add something of...2 comments | ![[The Puffball Collective from Hulk's Visit to the C] Just sort of a goof....but kinda not... ya know? A quickie post between customs. This silly thought occurred to me, and as a Hulk completist I felt compelled.
Keep on blastin!
T](userimages/customs/28000/27792-1.jpg) The Puffball Collective from Hulk's Visit to the C Incredible Hulkby ole jade jawJust sort of a goof....but kinda not... ya know? A quickie post between customs. This silly thought occurred to me, and as a Hulk completist I felt ...2 comments |
![[The Cast of Hack/Slash] I present, for your amusement...the cast of Hack/Slash the series. Together based on the cover of the new series issue #1
Keep on blastin!
T](userimages/customs/28000/27752-1.jpg) The Cast of Hack/Slash Hack / Slashby ole jade jawI present, for your amusement...the cast of Hack/Slash the series. Together based on the cover of the new series issue #1
Keep on blastin!
T...1 comments | ![[Cassie Hack (Hack/Slash)] I present to you, Cassie the slasher slayer from the Hack/Slash series. This was by far my most complicated custom thus far. The Return of Supergirl figure had static hands and feet so I cut them off and added articulating hands from Barda and combat boots from a 5" Avatar figure. The additions to the boots are sculpted. The thigh highs are from Black Canary with rubber bands and fishing tackle added. The hair was removed and re-sculpted. I also added a choker out of craft twine. In keeping with my tradition of authenticity, (actually, only her partner Vlad's steel cleaver so far,) I fashioned a real oak bat with real nails through the end of it. "Kiss It" is carved and painted into it and then it was sealed. A special thanks goes to loose C. I was working on Cassie's head when he posted his Black Widow. It really made me concentrate on the face and the make-up effect. I hope the extra effort shows.
How'd I do?
Keep on Blastin!](userimages/customs/28000/27751-1.jpg) Cassie Hack (Hack/Slash) Hack / Slashby ole jade jawI present to you, Cassie the slasher slayer from the Hack/Slash series. This was by far my most complicated custom thus far. The Return of Supergirl...0 comments |
![[Pooch (Hack/Slash)] I present to you Pooch, the ever loyal nef demon from the Hack/Slash series. This little guy started as a 4" farm horse from Michael's. Let me tell you, this thing was more work than some of the big figures.
I: cut the legs down over an inch, cut off the ears, trimmed them and replaced at the sides of the head, sanded off the eyes, drilled holes and sculpted new eyes on the top of the head, cut the snout? down by half and sculpted the gums and teeth into a recess so they look more natural, sculpted a widdle nose, cut off the horse tail and sculpted the dog tail. (yeesh, if eyesight is finite, this little guy cost me a few months of vision) Tamiya paints with a wash on the body and dry brushing on the feet/legs. I like him, how bout you?
Keep on Blastin!
T](userimages/customs/28000/27622-1.jpg) Pooch (Hack/Slash) Hack / Slashby ole jade jawI present to you Pooch, the ever loyal nef demon from the Hack/Slash series. This little guy started as a 4" farm horse from Michael's. Let me ...3 comments | ![[Samhain (Hack/Slash)] I present to you Hamhain, the anti-hero? villian? from the Hack/Slash series. This series has some really cool characters that I think would (will) make neat figures. For this one I figured the first step was trying the coat alteration. If I could turn Spirit's coat into a duster with a hood, I would go through with this. The additions were made using a rubberized fabric. I think it used to be a chemical apron. Those crackles in the hood weren't even planned, they just happened as I shaped it. The head was a sculpted DCU head. I am planning more stuff from this series, so if you are a fan, there will be more characters coming in the future. I like it. How did I do?
Keep on Blastin!
T](userimages/customs/28000/27621-1.jpg) Samhain (Hack/Slash) Hack / Slashby ole jade jawI present to you Hamhain, the anti-hero? villian? from the Hack/Slash series. This series has some really cool characters that I think would (will) m...2 comments |
![[X-O Manowar] Aric here started out as the new Crysis figure. I sculpted the vest, boots, cannons and cod piece thingie. Head is a Guile with the helmet sculpted around it. I have had X-O on my list to do for a bit and when this fig. hit stores, I was given the perfect opportunity. I had fun makin' this one. How'd I do?
Keep On Blastin'
T](userimages/customs/27500/27445-1.jpg) X-O Manowar Valiantby ole jade jawAric here started out as the new Crysis figure. I sculpted the vest, boots, cannons and cod piece thingie. Head is a Guile with the helmet sculpted ...18 comments | ![[Killpower] Hey, Anybody remember this guy? Marvel U.K's Killpower. The 12 year old killing machine with no sense of right or wrong. Truth is, I am trying to come up with some off beat characters that match up in some way to my pathetic supply of fodder base figures.
Sanded Herc's beard, mustache and leg straps off, sculpted on hair and some other details and painted. The backpack was a piece of fodder from the bin with some sculpey added. Suspenders are foamies. How'd I do? Keep on Blastin! T](userimages/customs/27500/27308-1.jpg) Killpower Marvelby ole jade jawHey, Anybody remember this guy? Marvel U.K's Killpower. The 12 year old killing machine with no sense of right or wrong. Truth is, I am trying to c...1 comments |
![[Vlad the Slasher Slayer ( Hack Slash)] For those of you not familiar with the series Hack/Slash; Vlad – The enigmatic partner of Cassie, Vlad is a big, muscular, disfigured man, who wears a gas mask and brandishes two big meat cleavers. Met by Cassie when they were both stalking the "Meatman Killer", Cassie soon befriended him. There's not much known about Vlad, not even his full name, but he seems very aware of his unconventional looks, which prompts him to wear the gas mask (which, he says, protects him from the thin outside air he has been deprived of for 20 years – though he can be seen breathing without his mask too). According to Vlad, he was raised by a butcher who rescued him from a garbage can. The butcher served as his only human contact. He used comic books to teach Vlad to read; he also taught Vlad how to use knives to help him adjust to his deformities. When the butcher died, Vlad was forced to go outside where rumors of the Meat Man started and he eventually met Cassie. Vlad's relationshi](userimages/customs/27000/26698-1.jpg) Vlad the Slasher Slayer ( Hack Slash) Hack / Slashby ole jade jawFor those of you not familiar with the series Hack/Slash; Vlad – The enigmatic partner of Cassie, Vlad is a big, muscular, disfigured man, who w...3 comments | ![[Caiera the Oldstrong] What's up all? Got another Hulkiverse custom here. Caiera, Wife of the Hulk (yeah, dead, I know)
Started with an Electra base with a Black Canary (the one with the pony tail)head. All the armor is sculpted and the spots that cross joints are freed up to retain articulation. I used a craftsmen tool box drawer liner for the shoulder armor. That stuff is neat, it's thin and textured. I'll probably use it again for something else later. Painted with Tamiya paints. Her skin is a perfect (I think) medium grey.
I'm gonna say that I am very happy with her. What do you think?
Keep on blastin!!
T](userimages/customs/27000/26659-1.jpg) Caiera the Oldstrong Incredible Hulkby ole jade jawWhat's up all? Got another Hulkiverse custom here. Caiera, Wife of the Hulk (yeah, dead, I know)
Started with an Electra base with a Black Canary (t...2 comments |
![[AJAX & Prof. Hulk] Alas...The Pantheon reunion rolls around again. This year Doc Banner/ Hulk and Ajax were the only ones to attend. (at least Ajax found the place this time!!)
Little (LITTLE!?!?) Ajax started out as a Marvel Select Thing, lost his head, and gained about a half pound of sculpt. New head is a Perseus noggin, breastplate and skirty thing are foam. Paint is clear yellow over flat aluminum.
I truly believe that this Ajax is the most dangerous figure in the Marvel Universe..... This guy, if thrown would definitely split the skull of any mugger or assailant.
The Hulk is jut an old project that I may actually repaint someday. (not totally happy with finish.)
What do ya think?](userimages/customs/27000/26580-1.jpg) AJAX & Prof. Hulk Incredible Hulkby ole jade jawAlas...The Pantheon reunion rolls around again. This year Doc Banner/ Hulk and Ajax were the only ones to attend. (at least Ajax found the place this...7 comments | ![[Almost Hulk] It's just about time to RUUUN!! The idea was to be 2/3 or so through the change. I wanted to do something and I am still waiting to find some affordable base figures. I kind of used this as a painting practice exercise. I added some sculpt for pants on the lower legs and a couple of busting shoes. Other than that, I just tried to paint it well.
Thanks, what do you think??](userimages/customs/27000/26574-1.jpg) Almost Hulk Hulk - Movieby ole jade jawIt's just about time to RUUUN!! The idea was to be 2/3 or so through the change. I wanted to do something and I am still waiting to find some afford...3 comments |
|