![[Wolverine] Just a plain Wolverine. Everyone has to have one. I didnt like the articulation on the MS Wolverine so I went to upgrade him. I rubbed out the black circle/red lightning bolt logo and then went to work swapping the parts. Thank you for the tutorial regarding the claws. A little repainting and he is done. Thanks for looking and I hope you like.
Simple recipe
Toroso is DCU Prof Zoom
Head/Lower Legs MS Wolverine
Lower arms DCU Omac
Claws=bobby pins
Shoulder pads-Iron Man figure
Belt -rubber band
X logo-fodder](userimages/customs/39000/38876-1.jpg) Wolverine DC Universeby 3mountainsJust a plain Wolverine. Everyone has to have one. I didnt like the articulation on the MS Wolverine so I went to upgrade him. I rubbed out the black...3 comments | ![[Agent 47] A repaint of Prof X.
Sanded the vest lines to make the white shirt seamless
Scuplted tie
Swapped hands with ML Legendary Rider Logan figure.
Modified the head by sculpting the brow a little bit more predominate and painted to get a more paler complexion.
Since there were already great figures done on this character I wanted to take a stab at him.
Hope you like.](userimages/customs/38500/38156-1.jpg) Agent 47 Marvel Legendsby 3mountainsA repaint of Prof X.
Sanded the vest lines to make the white shirt seamless
Scuplted tie
Swapped hands with ML Legendary Rider Logan figure.
Modified ...2 comments |
![[Sandman II] This Sandman is the Sandy Hawkins version. He was the original JSA Sandman's sidekick Sandy.
Before the Alex Ross update with the trench coat and fedora hat he wore this costume in the JSA.
Base figure is a repaint of the Black Lantern Hal Jordan
Goggles came from dc universe Starman's head
Gas Mask is from a GIJoe figure
Straps from Movie Masters B. Wayne
Belt from an Xmen figure,buffed out the X symbol
Leg and arm bands are from a ML Mr. Sinister cape
Gun is a ML Dr.Doom gun modified.
Hope you like.
Happy Good Friday and Happy Easter everyone.](userimages/customs/38500/38154-1.jpg) Sandman II DC Universeby 3mountainsThis Sandman is the Sandy Hawkins version. He was the original JSA Sandman's sidekick Sandy.
Before the Alex Ross update with the trench coat and fed...2 comments | ![[Bluejay] This character comes from the DEEP archives of the JLA team. He recently found some face time in the issues that came out just before the 52 universe turnover. Gotta complete the team, so...
Base is ML Sentry.
Wings are XMC BoP Angel
Hands are ML B. Panther
Head is DCD Midnighter & BD Hawkman.
Drilled holes in the back to attach wings. They can move up and down for whatever position you would like.
Sculpted the talons on his fingers.
The legs are some floss/pick devices I cut and added on.
Paint and done.
Hope you like.](userimages/customs/38000/37909-1.jpg) Bluejay Marvel Legendsby 3mountainsThis character comes from the DEEP archives of the JLA team. He recently found some face time in the issues that came out just before the 52 universe...3 comments |
![[The Old Soldier] This character comes from the Astro City universe. I was reading the GN Life in the Big City, and this obscure character stood out for me. So I made him. My 3rd pic has a reference of the character I was aiming for.
Recipe is as follows:
Head DCD KC Superman
Body ML Bishop
Sculpted the head bandages and added a towel from a McFar. football player.
Sculpted armour on the shoulders. Technique used, added green putty and the rolled a wadded ball of tinfoil to try to get the chainmail look.
The boots I added shoulder pads from a ML Mr. Sinister to get the rounded tops.
Belt is a ML Omega Red. The canteen is from MS Cap/Bucky and grenade from DC Bats reborn. They have magnets I attached so they can come off and on.
Sword is Wralls from Conan 2pack.
Gun/pistol/flag/sash came from fodder bin.
Hope you like.](userimages/customs/37500/37242-1.jpg) The Old Soldier Marvel Legendsby 3mountainsThis character comes from the Astro City universe. I was reading the GN Life in the Big City, and this obscure character stood out for me. So I made ...4 comments | ![[Magneto] This version of Magneto is from his costume in the 80s, early 90s. It came to me when I saw the new X-Men vs Avengers coming out and it stirred up my memory of this costume Mags wore in the 1st X-men vs avengers mini-series.
Recipe is as follow.......
Base figure- ML Bullseye
Head-LOTR
Cape-taskmaster with hood removed
Collar-dcuc Star Saph. WW
Boots/glove details-sculpted.
Belt-rubber band
I painted the boots and glove armor grey instead of white just to provide a contrast. In the books it was white. I also added the strands of hair in the front of his head because that is what Magneto had in the books.
Hope you like.](userimages/customs/36500/36488-1.jpg) Magneto Marvel Legendsby 3mountainsThis version of Magneto is from his costume in the 80s, early 90s. It came to me when I saw the new X-Men vs Avengers coming out and it stirred up my ...6 comments |
![[Wonder Woman DC 52] This labour of love effort goes to my sister-in-law. My brother asked for a custom of WW for her Birthday,(she collects WW figures) and this is what I came up with. I had a challenging time selecting what costumed version from the new DC 52 universe. Some images she has pants, no pants, jacket no jacket, gold tiara vs silver tiara, white striped boots or strictly black pants all the way down.
This eventually came from picking and choosing the qualities I liked. Anyways.......
Base is BN Jade
Tiara and lasso from DCUC Star Sapphire WW
Jacket is ML Leg Rider Logan
Braclets are sculpted
Belt and collar is a Mr. Sinister cape
Lower legs from a DC Direct WW JLA.
Top of breast plate is a section of Anti-Monitor BAF head piece, I chopped off.
She loved it and that made me happy. It was a pleasure to do this for her because she is so great.
Family asks for a custom action figure = No $$$$$$$. lol :P](userimages/customs/36500/36414-1.jpg) Wonder Woman DC 52 DC Directby 3mountainsThis labour of love effort goes to my sister-in-law. My brother asked for a custom of WW for her Birthday,(she collects WW figures) and this is what ...5 comments | ![[Batman] I made this Batman for a friend of mine. The base is a ML BP with the head and hands swapped with a DCD Batman. Belt and chest bat is from the fodder bin.
The 3rd pic contains his alter ego Matches Malone. My friend asked for a custom Batman character so I did the Malone figure first, as a joke and presented it to him. It was funny when he got it and did not know what to say.
Matches is a Harvey Deny base with B. Wayne head. Sculpted stash and sunglasses from fodder bin. Painted the jacket as garish as the character wears in the comics.
Hope you like.](userimages/customs/36000/35858-1.jpg) Batman Marvel Legendsby 3mountainsI made this Batman for a friend of mine. The base is a ML BP with the head and hands swapped with a DCD Batman. Belt and chest bat is from the fodde...8 comments |
![[Matt Murdock (Daredevil)] A very simple custom. I wanted to see how a Cyclops head would turn out for a Matt Murdock custom.
The base is a Harvey Dent base with a XMC Ruby armor Cyclops head.
Repainted the shirt and tie. Filled in the middle part of the visor to tweak it to look like ultra cool glasses. The cane is a Q-tip with the cotton removed and a small rubber band for the strap.
Painted his hair orange to make him more Matt Murdock like.
The H. Dent base is very possible and if Matt needs to spring into action he can.
The 3rd picture is Matt defending his favourite client.](userimages/customs/36000/35796-1.jpg) Matt Murdock (Daredevil) | ![[Starfire] A very easy custom to do. I needed Starfire to complete my Red Hood & Outlaws trio.
Base figure Star Sapphire, swapped head and hands with DcU Cheetah figure.
Sculpted wrist guards and shoulder pads.
Paint and done.
I was really surprised how well the Cheetah head worked.
The Star Sapphire figure I bought came with two right hands, go figure.
Hope you like.
Happy New Year to all.](userimages/customs/36000/35537-1.jpg) Starfire DC Universeby 3mountainsA very easy custom to do. I needed Starfire to complete my Red Hood & Outlaws trio.
Base figure Star Sapphire, swapped head and hands with DcU ...5 comments |
![[Red Arrow] This is Red Arrow from the New DC 52. I liked the style and tried to capture it from the comic book pages. The recipe is as follows.
Baseball Cap is taken from a Nascar figure, I was looking for a Macfarlane Baseball player but could not get my hands on one.
Hair is from a movie FF Torch figure. The translucent orange figure's flames (from head) was removed, trimmed, turned upside down and glued to the cap.
Head is a ML Gambit. Sliced off the skull so that the cap would sit on it and sculpted the domino mask. I also sanded off more of the black portions of his mask that was more predominant on his cheeks. I think the the smirk compliments the Roy Harper attitude.
Torso/arms are XMC Angel
Legs-swapped them from a XMC Wolverine Ninja figure.
Bow/Quiver are from a DCD GA Id Crisis figure. I had to shave down the quiver peg to fit into the back. The figure had the holes for the wings so it was a good match.
Sculpted the "A" on the buckle and a random fodder belt.
Thigh gu](userimages/customs/35500/35058-1.jpg) Red Arrow X-Menby 3mountainsThis is Red Arrow from the New DC 52. I liked the style and tried to capture it from the comic book pages. The recipe is as follows.
Baseball Cap is...4 comments | ![[Red Hood] 2 things you cannot get enough of, turkey and Red Hood Figures. A popular character deserves many renditions. This is to resemble him from the new series.
This Red Hood starts off with ...
ML Black Panther head, sculpted over
ML Xorn, torso and legs. Sanded down the "x"s on the calf and lower shins. Sanded/dremelled the chains off his torso and belt buckle. Bat logo on chest is a batarang from a misc DC Direct batman figure.
Right hand is substituted with a extra right hand from a ML Forge/Wolverine 2 pk.
Gun holsters are from DC Bat/Reborn figure as well as the guns. The right leg holster is from a Star Trek figure.
Staps on feet are from a ML Mr. Sinister cape.
Jacket colour is a mixture of about 4 paints and the shine on the mask and logo is from coating them with clear nail polish.
I wanted the mask and logo to be really slick and glossy. I am not sure of the ramifications of using the clear nail polish on the figure but I guess time will tell if I did something no](userimages/customs/35000/34561-1.jpg) Red Hood Marvel Legendsby 3mountains2 things you cannot get enough of, turkey and Red Hood Figures. A popular character deserves many renditions. This is to resemble him from the new s...4 comments |
![[Colossus] This was a very simple custom. The IM C.Dynamo is a perfect base for a Colossus figure.
Removed chest protector off of the original figure.
Swapped head to a ML Xorn (Magneto head)
Some sculpt on the chest and an X-man logo and voila.
The citadel paint was a perfect match.
Hope you like.](userimages/customs/34500/34205-1.jpg) Colossus Iron Manby 3mountainsThis was a very simple custom. The IM C.Dynamo is a perfect base for a Colossus figure.
Removed chest protector off of the original figure.
Swapped h...6 comments | ![[Thor] This angry Thor was made of spare parts I had from various other custom cannon fodder.
Head-ML Omega Red
Helmet-Sculpted middle/wings from DC Direct BD Hawkman
Body-Edge wrestling figure.
Chest armor-thumb tacks (points clipped off)
Belt-ML Omega Red
Boot tops-2 ML IronFist collars modified
Boots-straps are a ML Mr. Sinister cape.
Cape-Mysterio from SMC.
Hammer-sculpted, with the handle from a missle from an action figure gun.
Hope you like.](userimages/customs/34500/34180-1.jpg) Thor Wrestlingby 3mountainsThis angry Thor was made of spare parts I had from various other custom cannon fodder.
Head-ML Omega Red
Helmet-Sculpted middle/wings from DC Direct B...2 comments |
![[Nightwing-Identity Crisis] I am not sure if Nightwing was in the Identity Crisis mini series, but I wanted to see what he would look like as a M Turner figure. Took the Superman figure and sculpted some hair, removed cape and belt. Added some wrist and shin guards. Batons are Qtips with the cotton removed and painted silver. Sculpted mask and paint.
Hope you like.](userimages/customs/34500/34178-1.jpg) Nightwing-Identity Crisis DC Directby 3mountainsI am not sure if Nightwing was in the Identity Crisis mini series, but I wanted to see what he would look like as a M Turner figure. Took the Superma...1 comments | ![[Us Agent] Everyone including me wants an US Agent figure. This one I wanted a little grittier looking. John Walker was/is a bit of a meanie and I wanted to show a more aggressive tone and nature in his face.
Head is ML Bullseye, with wings from a MS Bucky Cap A.
Sculpted stripes on chest.
Hands are ML Cyclops, attached with magnets. Articulation has not been diminished.
Shield is a ML Taskmaster accessory.
Hope you like.](userimages/customs/34500/34071-1.jpg) Us Agent Marvel Legendsby 3mountainsEveryone including me wants an US Agent figure. This one I wanted a little grittier looking. John Walker was/is a bit of a meanie and I wanted to sh...4 comments |
![[Jack O' Lantern] A fairly simple custom. This character comes from the Ultra Marine Corps (DC Comics JLA Classified Series). The 2nd picture has included the refernce look of the character that I was trying to capture.
The receipe is SMC Hobgoblin base, SM Origins SM 2099 head and cape, ML IF flame effect. Some random pouches for the belt and paint. I was trying to get this done for Halloween but time was not on my side.
A pretty obscure version of the character but after reading the book I liked the visuals on him.
I think this is the 1st Jack O' Lantern on the realm. (maybe the last lol)
Hope you like.](userimages/customs/34500/34054-1.jpg) Jack O' Lantern Spider-Manby 3mountainsA fairly simple custom. This character comes from the Ultra Marine Corps (DC Comics JLA Classified Series). The 2nd picture has included the refernc...11 comments | ![[Magneto] I wanted to have a Magneto Figure in an armor type costume. Being the master of magnetism he should have more metal worn on his body. So here we go..
Base-R.Q.A. Cyclops
Helmet-Magneto
Head-ML Black Panther
Cape-ML Black Panther
Chain-ML Luke Cage Belt
Hands-Ironman Mark VI
Swapped the hands and they retained all their mobility. Repainted the figure with a gore red & burnished gold mixture. The lavender colour is a warlock purple & chainmail mixture.
I wanted to mute down the red that the figure already had to make it more closer to the colour Mags has in the comic books.
The big debate for me was to alter the cape's colour. I left it untouched and think it is alright.](userimages/customs/34000/33638-1.jpg) Magneto X-Menby 3mountainsI wanted to have a Magneto Figure in an armor type costume. Being the master of magnetism he should have more metal worn on his body. So here we go.....7 comments |
![[Highlander Lobo] There can be only one. And when you have killed off every member of your species, you are the only one. The immortal scottish bounty hunter Lobo MacLeod of the clan Macleod, comes ever so close to the ultimate bounty prize...The Fraggening. Beheading his bounty contracts is not required, He just prefers it that way.
DO NOT LOOK UNDER THE KILT!!!!
Lobo MacLeod consists of
ML Mr. Sinister Head, WWE Edge hair, Omega Red body, Plaid cloth for kilt and sash.
Sculpted the facial mustache on him. Hook was sculpted and all other accessories were from my fodder bin.
Enjoy and Happy Halloween.](userimages/customs/33500/33321-1.jpg) Highlander Lobo Marvel Legendsby 3mountainsThere can be only one. And when you have killed off every member of your species, you are the only one. The immortal scottish bounty hunter Lobo Ma...0 comments | ![[Nightwing] Nightwing is a blatant rip off of the one posted here before by Anthony's Customs. But that one was so good that it deserves some sort of copying. Here is what I did. Same recipe as Anthony's but I left the eyes normal with no white out. Added a little hair sculpting on the sides and front. Sculpted mask and thinner blue strip on the front and back.
Hope you like.](userimages/customs/33500/33320-1.jpg) Nightwing Marvel Legendsby 3mountainsNightwing is a blatant rip off of the one posted here before by Anthony's Customs. But that one was so good that it deserves some sort of copying. He...2 comments |
![[Slade] Slade comes from a ML Gambit with a head swap from a IronMan Mark VI head. Shoulder pads from a ML Loki and some random sculpting on the head, wrist and thigh guards, and chest protector. Random fodder parts for belt.
Hope you like.](userimages/customs/33000/32682-1.jpg) Slade Marvel Legendsby 3mountainsSlade comes from a ML Gambit with a head swap from a IronMan Mark VI head. Shoulder pads from a ML Loki and some random sculpting on the head, wrist ...4 comments | ![[Zoom] Just a repaint copied from Bob-A-Ferret. I did touch up the eyes to get the Flash issue #200 effect. But at least this will initiate me for the I hate painting the colour yellow club. What a chore.](userimages/customs/33000/32662-1.jpg) Zoom DC Directby 3mountainsJust a repaint copied from Bob-A-Ferret. I did touch up the eyes to get the Flash issue #200 effect. But at least this will initiate me for the I ha...3 comments |
![[Shang-Chi Spider Island] This custom was based on the recent Marvel depictions of Shang-Chi. The head was a Ogun from a ML Wolverine Brown Costume base, ML IronFist Torso, Waist sash a LOTR figure and ML IronFist, wrist bands from a DCD Aquaman. Legs are AOA Sabertooth and feet are ML IronFist. I cheated on the dragon design on the T-shirt, just embelished the Iron Fist dragon logo.
Filled the head and used magnets to attach for posing.](userimages/customs/33000/32660-1.jpg) Shang-Chi Spider Island Marvel Legendsby 3mountainsThis custom was based on the recent Marvel depictions of Shang-Chi. The head was a Ogun from a ML Wolverine Brown Costume base, ML IronFist Torso, Wa...2 comments | ![[Deathstroke] Always wanted a D.T.T. with the articulation of the ML lines. The figure comes from a ML Cyclops base, ML Iron Fist head, ML Taskmaster hands. The head was scuplted to over to get the 1/2 and 1/2 mask. Sword and sheath are from ML Taskmsaster, gun ML Bishop, holder DCD Batman Reborn. Boot knife and belt are from MS Cap A (Bucky).
Switched to Taskmaster hands so that Slade could hold on to his weapons.
Hope you like.](userimages/customs/32500/32450-1.jpg) Deathstroke Marvel Legendsby 3mountainsAlways wanted a D.T.T. with the articulation of the ML lines. The figure comes from a ML Cyclops base, ML Iron Fist head, ML Taskmaster hands. The h...5 comments |
![[Dr. Fate] Sculpted the helmet and belt. Added 2 buttons for cape clasps. Trimmed the collar of the cape and repainted the entire figure.](userimages/customs/32000/31869-1.jpg) Dr. Fate | ![[Blockbuster] This is an old custom of mine. It is a repaint with a vest I got off of a LOTR figure, the sandals are styrofoam and rubber bands and a piece of leather rope for the belt.
Hope you like.](userimages/customs/32000/31868-1.jpg) Blockbuster Marvel Legendsby 3mountainsThis is an old custom of mine. It is a repaint with a vest I got off of a LOTR figure, the sandals are styrofoam and rubber bands and a piece of leath...1 comments |
![[Unmasked Capt. America] When I 1st saw the solicitations for the BD Aquaman, I knew what he was meant to become. The process for this figure was to cut of the fins from the back of both legs. Sculpted the tops of the boots and the abs.
For the abs and white sleeves I first used a green fill to smooth the armour down, then green stuff for finishing. I wanted to make sure there was contrast between the armour and the red and white stripes. For some reason the more red and white stripes I painted the more odd it came out. I finally went with a thicker, block type stripes.
Sanded of the "A" from the buckle and just a piece of plastic for the new silver buckle.
Repainted the entire figure. The white star on the front is a foamy and I used the same foamy for the star on his back.
My inspiration for this Cap A was John Cassaday's Cap A. I wanted Cap's upper armout to be detailed and predominate like his artwork.
Happy up coming 4th of July to my U.S. neighbours to the south. This one is for you. I w](userimages/customs/31000/30572-1.jpg) Unmasked Capt. America DC Directby 3mountainsWhen I 1st saw the solicitations for the BD Aquaman, I knew what he was meant to become. The process for this figure was to cut of the fins from the ...4 comments | ![[Batman 1,000,000] I used a ML Black Panther as a base for this figure. Trimmed off the finger claws, ripped off the belt and modified the cape a la Batman. The new belt is from a DCD Batman Reborn J. Todd figure.
The chest straps are from 2 pen cap lids and the face mask was sculpting. (which I am trying to get a better grasp on). Any good tutorial sites for sculpting? Anyways I hope you like.](userimages/customs/30500/30119-1.jpg) Batman 1,000,000 Marvel Legendsby 3mountainsI used a ML Black Panther as a base for this figure. Trimmed off the finger claws, ripped off the belt and modified the cape a la Batman. The new be...2 comments |
![[Armor Lex Luthor] I took a IM The Armored Avenger HulkB. figure and repainted it green and such. Then I switched heads with a DCD Hugo Strange Secret Files sans goatee. Filled in the areas above his ears and painted. I wanted to keep the same colour scheme as the classic super powers Lex Luthor. Never had the opportunity for a DCU Armored Luthor so I made my own.
Hope you enjoy.](userimages/customs/30000/29882-1.jpg) Armor Lex Luthor Iron Manby 3mountainsI took a IM The Armored Avenger HulkB. figure and repainted it green and such. Then I switched heads with a DCD Hugo Strange Secret Files sans goatee....3 comments | ![[Havok] I took a ML Havok and switch it with an Angel head. The I took a socket set to give me the outline of plasma burst on his chest. Then I painted over the lies. The coils on his shoulders are from an Omega Red figure. The glove braces are from a W.O.Warcraft sister figure's armor.
Thank You for looking. I hope you like.](userimages/customs/29500/29212-1.jpg) Havok Marvel Legendsby 3mountainsI took a ML Havok and switch it with an Angel head. The I took a socket set to give me the outline of plasma burst on his chest. Then I painted over...1 comments |
|