![[Mcfarlane Spiderman] Spiderman comes with two heads, two lengths of bendable webbing, a Camera, And Magnetic feet! Spiderman comes with switchable heads! A sculpted Todd Mcfarlane Head and a modern Paola Rivera esc head!
Spiderman was made from an existing spiderman figure fully repainted and shaded, crotch has been modified to give him better crouching poses. the Mcfarlane headsculpt was sculpted on top of another spiderman head. Bendable webbing was made from wire.](userimages/customs/46500/46354-1.jpg) Mcfarlane Spiderman Marvel Legendsby PackRatStudiosSpiderman comes with two heads, two lengths of bendable webbing, a Camera, And Magnetic feet! Spiderman comes with switchable heads! A sculpted Todd ...5 comments | ![[AX/RX Torture Droid (Republic)] Medic Droid put on a lower half of a Mas Amedda figure. Distressed the head and chest, added hoses and a belt (jango fett), and other kibble n' bits from the fodder bin.
Through a cool base together for him as well.](userimages/customs/46500/46177-1.jpg) AX/RX Torture Droid (Republic) Star Warsby PackRatStudiosMedic Droid put on a lower half of a Mas Amedda figure. Distressed the head and chest, added hoses and a belt (jango fett), and other kibble n' bits ...3 comments |
![[Metalhead] After getting the new Metalhead figure I was quite disappointed with the shoulder articulation, just cut joints! BOoooo I took a Iron Man figure and swapped in his shoulder joints and hollowed out Metalhead's shoulder pad doohickys and attached them. Full repaint!
Figure comes with an array of Magnetic attachments as well:
His Hand
Flame Burst (from McQuarrie Concept Boba Fett)
Saw Blade
Gripper Claw
Blaster
Also, extra add on kit for your TMNT Donny including a headset and remote for Metalhead!](userimages/customs/46500/46138-1.jpg) Metalhead | ![[Super Mecha Shredder] Mecha Super Shredder Stands 7.5 inches tall, Super Posable, and comes with a plethora of Accessories! Ready to Battle those Turtles!!! Shredder comes with Two Sets of hands, One clawed and one un-clawed to use with his MECHA SUPER CLAWS(everything about this Shredder is MEGA annnnd SUPER)! Shredder comes with a Pair of Super Claws that attach to his forearms via Magnets! Also, Shredder's cape is removable via Magnets as well. Also, Shredder comes with 2 Super Mecha Blades, which he can use to battle those Turtles into the ground! Lastly, Shredder comes with a custom base!
Super MECHA Shredder Recipe:
Head: Marvel Legends Namor, Playmates Super Shredder and Sculpt
Body: Neca Crysis Nano Suit
Armor: Playmates Super Shredder
Cyber Claws: Bionicle
Cyber Swords: Power Rangers (I think)
Belt: Playmates Super Shredder and Fodder
Base: Mcfarlane's Matrix Morpheus and Bricks from Creech Base](userimages/customs/46500/46136-1.jpg) Super Mecha Shredder |
![[Classic Jack O' Lantern or MAD JACK] Another figure that needed to be done! A CLASSIC Jack O' Lantern! You have your Classic Hob Goblin, your classic green Goblin, even a great DEMO- GOBLIN, but WHERE is a Classic Jack O' Lantern?@?@??@
Jack O' Lantern Features MAGNETIC Feet so he can stick to his Flight Disc! His Flight Disc has a Metal Top! Jack O' Lantern's Flight Disc attaches via Ball joint to a Flame Flight Stand as well (great for Displaying!) Figure Also Comes with a Pumpkin Bomb!
Recipe:
Head: Spiderman Jack o' Lantern Rescuplted
Torso: DC Universe Aquaman
Upper Arms: DC Universe
Gloves: Punisher
Legs: Ricky the Steamboat
Boots: Bucky Cap
Belt: vinyl & Airsoft BB's
Pumpkin: Marvel Super Heroes Green Goblin
Hover Disc: Robotix part and Canning Lid
Flame Stand: Movie Human torch
Ball Joint: Bionicle](userimages/customs/46500/46109-1.jpg) Classic Jack O' Lantern or MAD JACK Marvel Legendsby PackRatStudiosAnother figure that needed to be done! A CLASSIC Jack O' Lantern! You have your Classic Hob Goblin, your classic green Goblin, even a great DEMO- GO...8 comments | ![[Tombstone] I've been watching Spiderman the Animated series lately, and realized that there are a lot of Spiderman Villians that have yet to be made in the 6 inch Spiderman classics line and or Marvel Legends line, so I decided to give tombstone a good ol Re-hash! I didn't go for the Military Pants and Jack Boots version of him, but more with an updated version in Dark Jeans and Motorcycle boots. I think he looks pretty bad A and tough as nails.
Recipe:
Torso, Arms and Head - SOTA Blanka reworked and resculpted
Hands - Hulk (Norton Movie Hulk)
Legs down - Neca Duke Nukem
Collar: Vinyl
Gauntlets: Vinyl](userimages/customs/46500/46108-1.jpg) Tombstone Marvel Legendsby PackRatStudiosI've been watching Spiderman the Animated series lately, and realized that there are a lot of Spiderman Villians that have yet to be made in the 6 inc...9 comments |
![[Smaug from the Hobbit] I took a Mcfarlane dragon and did a new paint job, and also added gold, jewels and precious stones to his underbelly. I dont have any of the new Hobbit figures, but I think he is at a good scale for that line!](userimages/customs/45500/45135-1.jpg) Smaug from the Hobbit | ![[Chrome Dome] Chrome Dome is one of my favorite TMNT villains, so I decided to redo him to battle the new Nick Turtles!
I used the Neca Crysis Nano-suit figure and added lots of bits and fodder. I used a modified TMNT Chrome Dome head and Wings as well. Figure has a sheath on his back for his swords and has magnets in his hands for attachable blades or claws. Topped it off with a concrete display base (from Matrix' Morpheus)](userimages/customs/45000/44708-1.jpg) Chrome Dome |
![[Movie Heman MOTU Dolph Lundgren] I knew what I wanted to do once I saw the first pics of NECA's Ivan Drago. HE-MAN! This was one of my favorite movies as a child, I remember going to see this at the movies with my Brothers and my Grandfather twice in a week!
I added fodder and straps to create his armor,
Conan (LCBH)forarms and hands
scratch built a sword from various swords I had in my weapons fodder,
Modified existing hair from a Neca Quintin Turnbull (Jonah Hex)and sculpted the rest
sculpted over his addidas,
Gave him a cloth cape that can be removed,
and to finish him off added fodder and sculpting for the various accents
Figure is super articulated as well!!!
Love this Neca figures body, and was perfect for this custom! Plus, NO PAINT RUB on the JOINTS!!!](userimages/customs/44000/43742-1.jpg) Movie Heman MOTU Dolph Lundgren | ![[Movie Concept Winter Soldier Captain America BUCKY] Captain America, Plus a different head sculpt + sculpting, and Iron Man arm. Added fodder bits for details. Full Repaint.](userimages/customs/43500/43418-1.jpg) Movie Concept Winter Soldier Captain America BUCKY |
![[Classic Incredible Hulk BAF Scale] I tried to put together a classic version of the Hulk. And making him bigger than the hulks we have been given from the MU line.
Parts used various Hulk and Hulk figs.](userimages/customs/43500/43254-1.jpg) Classic Incredible Hulk BAF Scale | ![[Steampunk Ghost Rider] Ghost Rider was Built from:
Ghost Rider Head
elec. arcs: Flashback emperor
Superman Torso
Lex Luther Waist and legs, Arms and Hands
Sculpted Boots
The rest was a fodder explosion onto Glue.
Bike:
Sigma6 gi joe vehicle (rear section)
Model Train engine: (middle section)
Spokes: CASE Tractor/Backhoe
Elec arcs: Unleashed Darth Sidious
Then again, fodder explosion, various bits making up the details of this bike.
Bike Features light up arc reactor effects
Tons more pics elsewhere (facebook), check em out](userimages/customs/43500/43203-1.jpg) Steampunk Ghost Rider |
![[Darth Malgus] I took Darth Malgus and made him how Hasbro Should have made him. The original figure looked rediculous, and needed a repaint, but also, something needed to be done with that crappy hip articulation Hasbro put on that figure.
I ripped his legs off and used some ROC Cobra Trooper legs as a base (for the articulation). I shaved them down and attached them to the Malgus legs, and completely re-sculpted them. Figure still regains swivel in the waist, but now has better hip articulation.
I also added articulation to the hands, by using the swivel hands in one of the recent Gi Joe Snake Eyes figures, gives Malgus the ability to now POINT his saber. Gives him much more mobility and awesome poses!
FULL REPAINT (he needed it) If you are not familiar with what the original figure looks like, please google image search for it, and see how terrible the figure looked.
I also included a double bladed lightsaber like what he uses in the Old Republic Trailer, and I also Added 3 extra P](userimages/customs/42500/42297-1.jpg) Darth Malgus Star Warsby PackRatStudiosI took Darth Malgus and made him how Hasbro Should have made him. The original figure looked rediculous, and needed a repaint, but also, something ne...6 comments | ![[Darth Bane] Found an image of this version of Darth Bane and wanted to do it!
Head: Darth Bane Evolutions
Torso: Jango Fett Evolutions
Left Arm: Winter Soldier
Right Arm: Weapons X
Waist and Upper Legs: Prince of Persia
Boots and feet: Darth Bane Evolutions
Colar was from?? dont know, some star wars figure I belive...I cut it down a bit too](userimages/customs/42500/42296-1.jpg) Darth Bane Star Warsby PackRatStudiosFound an image of this version of Darth Bane and wanted to do it!
Head: Darth Bane Evolutions
Torso: Jango Fett Evolutions
Left Arm: Winter Soldier...6 comments |
![[Concept Cyborg Darth Maul] I found some legs to a transformer...I believe it was the one guy who came out of Barricade in the first movie... I cut them down and then Added em to an evolutions maul...](userimages/customs/42500/42254-1.jpg) Concept Cyborg Darth Maul Star Warsby PackRatStudiosI found some legs to a transformer...I believe it was the one guy who came out of Barricade in the first movie... I cut them down and then Added em t...7 comments | ![[Darth Nihilus Super Articulated] Roc Trooper plus Nihilus Then repaint.](userimages/customs/42500/42253-1.jpg) Darth Nihilus Super Articulated |
![[Deadpool with 'the SITUATION'] Based off of the Gentle Giant Statue, I cobbled together this Deadpool!
Fully Loaded with Vespa, 'the SITUATION' Canon, Weapons weapons Weapons...AND BEVERAGES!
DeadPool was built from:
ML Cap
Shrunken Bowen Head
Boots from various figure??? (dont know)
I havent a freakin clue where the vespa came from, I've had it for a long time, waiting to do this custom. Decals I got from a buddy, so thanks Dude if your seeing this!
The Situation is all scraps, bits and parts from my fodder bin.
Cooler and beers ... non other than the Mckenzie brothers!!! Thanks eh!](userimages/customs/42000/41981-1.jpg) Deadpool with 'the SITUATION' | ![[24 Inches Tall Steampunk Iron Man] 2 Unicrons ripped apart and canabalized plus lots of plastic, aves, PVC pipe, wood and glue!
Wish I could post more photos. If you go to Facebook, and search for PackRatStudios I have a full album up as well as a Full video that goes into DETAIL on the build is on my facebook page, please go there to view that.](userimages/customs/42000/41819-1.jpg) 24 Inches Tall Steampunk Iron Man |
![[Steampunk the Wolverine] In 1915, after the start of World War One, Allied forces in North America were working on a special project, called Weapon X. The British and the French had a facility located in Northern Canada, working on creating a sort of super soldier, who would be expandable, and a superior weapon in this time of World War, where the weapons technology of the western empire were at a heightened pace.
Their Methods were not of a respectable nature, and would have been fround upon by the medical and scientific minds at that time. This facility and its work were of a top secret nature. Working from Victor Frankenstein’s previous work, this lab was taking the dead, and reanimating them, bringing them back to life, but also giving them the added strength and abilities to turn them into the weapons they were created to be.
One of the super soldiers who was created in this facility, was code named the Wolverine, due to his ferocity and aggression. He was trained as an assassin and let loos](userimages/customs/42000/41722-1.jpg) Steampunk the Wolverine | ![[Batman the Dark Knight Returns & Strikes Again] I wanted to create Batman in his Armor that you see him wear when he fights Superman in the Dark Knight Returns and ...ultimately in the Dark Knight Strikes Again (with Kryptonite fists!) Batman also features a Back Brace (you will have to go to the bay or facebook to see a pic of that!)
Figure is made from:
Movie Masters Batman Base
Legs: Halo Figure
Arms: Scorpionock
Hands: Optimus Prime
Head: Batman + Unleashed Emperor lower face! lol, works awesome I think!
Other Bits and fodder for armor his back and sides
This is a SDCC PackRatStudios exclusive! Check out more pics on my blog or on facebook!](userimages/customs/41000/40941-1.jpg) Batman the Dark Knight Returns & Strikes Again |
![[IRON CROSS - Agent of Hydra] This is a BAF figure of Iron Cross! I was going through some Alex Ross art, specifically his Invaders art, and saw this guy, and he is Massive. Im going with the Captain America Movie Verse version of Iron Cross, making him a Hydra pawn, not a Nazi Pawn as he is in the Comic Books. Powered By Cube Energy, This Iron Cross is Massive Standing at 10 inches tall!
Made from:
Head: Sculpt and fodder
Torso: Iron Man (12 inch)
Waist and legs: Fox Cleatus
Feet: Iron Man (12 inch)
Arms: Iron Monger Legs (modded)
HANDS: CREEEEECH!!! Awesome hands!!
More pics on my blog and Facebook
This is a SDCC PackRatStudios Exclusive...to commemorate all that was SDCC this past weekend! Check out my other SDCC Exclusive that is up on the bay as well!](userimages/customs/41000/40940-1.jpg) IRON CROSS - Agent of Hydra | ![[Ares Movie Concept Avengers 2] I’ve been wanting to do an Ares ever since I picked up Mcfarlanes Palantides Conan figure. Loved his helmet. I figured that I would create a real world/movie concept version of Ares, the god of war, as he might appear in an avengers movie!
Built from:
Base fig: LCBH
Head: LCBH Conan
Armor, Lower Arms, and Hands: Palantides
Helmet: Palantides
Belt Pouches: Batman
Belt Buckle: Dr Doom
Knife: LCBH Conan
Holster: Dr Doom
Hand Gun: fodder bin
Machine gun: Crysis Nano Suit fig
Sword: Fodder
Ax: LCBH Conan](userimages/customs/40500/40487-1.jpg) Ares Movie Concept Avengers 2 |
![[Omega Red Movie Concept] Totally wish "The Wolverine" would bring this guy into the picture...Send Wolverine into the East...and then North, to RUSSIA... This is what I came up with for a Omega Red Movie Concept!
Head: Omega red
Body: Crysis Suit
Armor: Halo Figure
Tendrils (bendable): Creech
Hands: IM2 Iron Monger (3 3/4 version)](userimages/customs/40500/40237-1.jpg) Omega Red Movie Concept | ![[Alien Cthulhu Breed] IF, HP Lovecraft and HR Giegers minds came together, and made a baby... this is what it might have possibly looked like!
PLUS, Alien 3 showed us that the alien emulates the being it was implanted in(Dog Alien), so I made an alien that was implanted into the Cthulhu!
Made from a Mcfarlane Alien, Wings, and Octopus parts...+ sculpt](userimages/customs/40000/39857-1.jpg) Alien Cthulhu Breed Aliensby PackRatStudiosIF, HP Lovecraft and HR Giegers minds came together, and made a baby... this is what it might have possibly looked like!
PLUS, Alien 3 showed us that...7 comments |
![[Magneto with Magnetic Orb Base] Acrylic Ball, Plus Acrylic Rod, Plus Light up Base+ clear purple paint= ultimate Magneto Flight Stand!
Figure comes with stand, and two portraits!](userimages/customs/40000/39856-1.jpg) Magneto with Magnetic Orb Base | ![[Retaliation Croc Master] Since Hasbro is holding off on the rest of the Retaliation figures, I thought I would make some of my own versions of some of my favorite cobra baddies, in Retaliation/Movie Form!
This Croc Master comes with 2 (TWO!) Massive Crocs, and he features a Croc Handling Harness, so they don't rip his arms off!
I give you Croc Master:
Head: 25th Croc Master
Torso: Wolverine Origins Logan
Arms: Vanko from Iron Man
Upper Legs: Wolverine Origins Logan
Lower Legs: 25th Croc Master
Chest Belt with Buckle: 25th Firefly
Waist Belt and Holster: 25th Croc Master
Crocs: Dont know...various crocs with new paintjob.](userimages/customs/40000/39640-1.jpg) Retaliation Croc Master |
![[Retaliation Big Boa] Since Hasbro is holding off on the rest of the Retaliation figures, I thought I would make some of my own versions of some of my favorite cobra baddies, in Retaliation/Movie Form!
I give you Big Boa:
Head: Vintage Cast + Fodder for hoses, spikes and control unit
Torso and Arms: SuperHero Showdown Magneto
Gloves: Sculpt
Upper Legs: ROC Heavy Duty
Lower Legs: 25th Gung Ho
Lower Lower legs and feet: Iron Man figure
Belt and Cup: MU Apocalypse](userimages/customs/40000/39639-1.jpg) Retaliation Big Boa | ![[Magneto] Simple custom. Head swap with Toybiz Marvel Showdown Magneto(like the expression on his face better), cape from Marvel Showdown Magneto and then a full repaint. Helmet has been given a metallic high gloss paint job.
Figure comes with custom built flight stand.](userimages/customs/39500/39303-1.jpg) Magneto |
![[Apocalypse BAF Scale] Apocalypse is built from a Mcfarlane Metal Gear Solid figure...dont know who... And Apocalypse!
Figure comes with 14 different attachments that connect via magnets. The add on accessories all attach to Apocalypse's arms via strong magnets, and the accessories can work on either arm. The accessories are as follows:
* 2 Hands
* 2 Blasters
* 1 Claw Hand
* 1 Blade
* Clubbed Smasher
* Shield
* Plasma Shield Generator
* Plasma Shield (clear green doo hicky) ;)
* 1 adapter (used to attach the following: Fork, Grasping Claw, Chainsaw and the blade)](userimages/customs/39500/39302-1.jpg) Apocalypse BAF Scale | ![[BERSERKER Wolverine] I used a select sculpt batman from DC Universe Series 3 for the bulkiness. I sculpted his chest and shoulder/neck area (batman's was made to hold a rubber cape in place). Figure comes with 2 heads one from an original marvel legends Wolverine Figure, the other a brand new sculpt from PackRatStudios, a BERSERKER RAGE Wolverine! STEEL CLAWS using needles Jin Recomended! If your out there looking, Thanks Man!!!
Figure also comes with base and flight stand...errr...getting thrown stand and or jumping stand. The base is sorta got that Danger Room Fell and I like it. The base can be used with or with out the flight stand.
The stripes on the custom are all cut from vinyl and glued in place, gives the figure a real cool vibe.
Tons more pics on my blog, GOOGLE ME and Follow...as well as on my Facebook, FACEBOOK ME and like me!
Let me know what you think!](userimages/customs/39500/39122-1.jpg) BERSERKER Wolverine |
|