![[Dudley] This one was a challenge to make, however im glad I get it done. I used savage dragon torso and sholders. I used sota akuma arms. for the legs I used a WWE agression figure.The head is NECA guile w/ alittle sculp design for more character-like look. the rest is also scupted the straps were made from fubber bands.this figure Goes great with my other street fighters](userimages/customs/37500/37284-1.jpg) Dudley Street Fighterby crowmagnumThis one was a challenge to make, however im glad I get it done. I used savage dragon torso and sholders. I used sota akuma arms. for the legs I used ...3 comments | ![[Yang] this was a cool fig to make! first I used SF sota gen as the base. used sota remy for the fodder head. next it was important to get the hair just right. I then noticed sota sf: adons hair turned around was a perfest match so I combined it with a little bit of sculpt and it came out looking really accurate. sculted the muscles and traded the arms with WWE kevin von erich followed by a re-paint then he was done.](userimages/customs/37000/36649-1.jpg) Yang Street Fighterby crowmagnumthis was a cool fig to make! first I used SF sota gen as the base. used sota remy for the fodder head. next it was important to get the hair just righ...4 comments |
![[Killer Bee] Not much here just a basic re-apaint, and scupt, dremmeled hole in hand, as to grip assault rifle. Red coat from Xmen Vs street fighter killer bee.](userimages/customs/36500/36434-1.jpg) Killer Bee Street Fighterby crowmagnumNot much here just a basic re-apaint, and scupt, dremmeled hole in hand, as to grip assault rifle. Red coat from Xmen Vs street fighter killer bee....9 comments | ![[Guy V3] ALRIGHT! this is my last re-do of any of customs. I know ive done this before, However I couldnt bring myself to be totally convinced by V2. This time I have him completly new facial features along with his signature dew. a complete re-paint of the gee. To more of his original features. I didnt like my kenji nether so i changed it. Gave him a custom sword to go with him...No worries i got new customs characters coming, but a man gotta do what a man gotta do!...hope you enjoy!](userimages/customs/36500/36308-1.jpg) Guy V3 Street Fighterby crowmagnumALRIGHT! this is my last re-do of any of customs. I know ive done this before, However I couldnt bring myself to be totally convinced by V2. This time...3 comments |
![[Rolento V2] Added some extra details to my original design. i wanted to share just in case somebody would want to make one of their own. i used an extra hand i had left over from a neca ken. so that he can actually hold his baton in like as he appears in the game. Its not an exact design but i got it as close as i could. I also added some grenades id found from a tomb raider fig, an idea i had seen on another custom. Did a full re-paint, this time i have the good paint!..thanks for looking enjoy.](userimages/customs/36500/36268-1.jpg) Rolento V2 Street Fighterby crowmagnumAdded some extra details to my original design. i wanted to share just in case somebody would want to make one of their own. i used an extra hand i ha...9 comments | ![[Cody] My favorite character made once again, I used sota sf guile arms, adon torso. I used from spider man movie peter parker's head, then i finished the legs with LCBH savage dragon. the hair was sculpted. I originally made his hair blonde like in street fighter alpha, went back did some research and i noticed the original FF look had more brownish hair...i'm super proud of this figure. enjoy and thanks for looking!.](userimages/customs/36500/36169-1.jpg) Cody Final Fightby crowmagnumMy favorite character made once again, I used sota sf guile arms, adon torso. I used from spider man movie peter parker's head, then i finished the le...8 comments |
![[Yun] Glad i got this guy made finally!...it wasnt easy! First, for the base i used sota sf gen, the arms are from a wwe character. I used ML professor X head. the rest is just scult.I braided a rubber band for his pony tail. the shoulder and chest muscles were all scupted as well as the hat the re-paint after, re-paint, after re-paint.I then used a tech deck skate board and we have Yun.wasnt easy getting him to do tricks!..im proud of this guy, hope you enjoy. thanks for looking!.](userimages/customs/36500/36095-1.jpg) Yun Street Fighterby crowmagnumGlad i got this guy made finally!...it wasnt easy! First, for the base i used sota sf gen, the arms are from a wwe character. I used ML professor X he...1 comments | ![[Geki] This was not an easy peice. Used hand ninja upper body:, Sota guile legs, adon feet. lots of sculpts and re-paints . actually cut off the the hood he once had, as Geki doesn't have one. used a spare vega claw and he was done. thanks for looking and enjoy.](userimages/customs/36500/36021-1.jpg) Geki Street Fighterby crowmagnumThis was not an easy peice. Used hand ninja upper body:, Sota guile legs, adon feet. lots of sculpts and re-paints . actually cut off the the hood he ...11 comments |
![[Eagle] Basically just DC aquaman upper body, and DC the question lower body. re-paint and sculpt here and there and he is done! Im extremly proud of how he turned out!. thank you for looking!. please vote!!](userimages/customs/36500/36019-1.jpg) Eagle Street Fighterby crowmagnumBasically just DC aquaman upper body, and DC the question lower body. re-paint and sculpt here and there and he is done! Im extremly proud of how he t...3 comments | ![[Abigail] I feel like im the only one in the world who remembers this guy!...as a kid, everytime i turned on Final Fight this guy would kick my ass hard! over and over AND OVER, until id have to start the game over. They really should of named this guy "Game over" instead of a girly name but whatever, its water under bridge!....AAAnyway i used two figs: sota birdie and ML faceoff juggernaut head and hands, did a re-paint again and again, added a gold chain and face paint and we have Abigail!..ENJOY! THANKS FOR LOOKING!!](userimages/customs/36000/35760-1.jpg) Abigail Final Fightby crowmagnumI feel like im the only one in the world who remembers this guy!...as a kid, everytime i turned on Final Fight this guy would kick my ass hard! over a...8 comments |
![[Belger] pretty easy design folks! for his base I used ML/professor X +wheelchair, i used sota sf gen head, heavy sculpt on face and head. Re-paint and belger is done!...THe only thing i left out was the crossbow...i can't find one ML stle for the life of me!..thanks enjoy](userimages/customs/36000/35676-1.jpg) Belger Final Fightby crowmagnumpretty easy design folks! for his base I used ML/professor X +wheelchair, i used sota sf gen head, heavy sculpt on face and head. Re-paint and belger ...8 comments | ![[Urien] I really focused on doing this one right, one of my favorite SF's. I chose wwe kevin von erich for my base,the only wrestling figure i could find that didnt have shoes. sculpted the muscles to give more size to the chest and shoulders. I used arms from WWe randy orton. I had some trouble finding the perfect head, soo i had a spare Sota SF akuma head and it came out perfect. sculpted the hair and did a re-paint, Its an original design. and im proud of it!.thanks for looking..enjoy](userimages/customs/36000/35654-1.jpg) Urien Street Fighterby crowmagnumI really focused on doing this one right, one of my favorite SF's. I chose wwe kevin von erich for my base,the only wrestling figure i could find that...12 comments |
![[Gill] I went through three different heads before i decided which one came the closest to what gill really looks like. I finally settled for Sota SF: guile head and i used some left over parts(DC superman) from some other figures to make the rest, the hair I sculpted, the back of the hair is off of a wrestler figure.](userimages/customs/35500/35474-1.jpg) Gill Street Fighterby crowmagnumI went through three different heads before i decided which one came the closest to what gill really looks like. I finally settled for Sota SF: guile ...4 comments | ![[Rose] Well!I thought id throw my hat in the ring on this one too! for the sack of another customizer with the same idea i had, that i stole from another customizer!..I give you Rose. this base figure has been sitting in my closet for 3months waiting for me finish her. Its not original!...however its got it own originalities! The hair is different sculpt, was kinda going for the SF:4 look. craft store wire thinga jigs and custome jewelry belt buckle and belt-. I thought id also show off my collection in the mix lol.](userimages/customs/35500/35442-1.jpg) Rose Street Fighterby crowmagnumWell!I thought id throw my hat in the ring on this one too! for the sack of another customizer with the same idea i had, that i stole from another cus...6 comments |
![[Cody] Cody! Finally i have made my favorite street fighter. This recipe i have been saving for a solely for this character. First I used Sota: SF adon torso, for those big shoulders Sota SF: guile arms+ball joints, attached to DC classic samurai legs, with LCBH savage dragon shoes. Had trouble finding the right head because cody has almost a careless look on his face, so i dug around and found a spiderman the movie peter parker head which was perfect.Sculpted the hair and details and did a re-paint.Then I used a couple of round wires i found on a bracelet and attached Sota SF birdy chain, then just like that he was done.](userimages/customs/35500/35097-1.jpg) Cody Street Fighterby crowmagnumCody! Finally i have made my favorite street fighter. This recipe i have been saving for a solely for this character. First I used Sota: SF adon torso...4 comments | ![[Joe] I have created yet another original character from the 1st street fighter. I show you Joe! pretty basic design used adon from sota sf: head and DC classic's Samurai upper body+arms. Sculpted some extra muscles on the chest and sholders, Also used LCBH Savage dragon legs used sota sf adon feet to complete the design, Then re-painted.](userimages/customs/35500/35004-1.jpg) Joe Street Fighterby crowmagnumI have created yet another original character from the 1st street fighter. I show you Joe! pretty basic design used adon from sota sf: head and DC cla...3 comments |
![[Guy V2] After some time to think and a bothersome mind, I finally did a redo on my first custom Guy, I must say he looks a lot better then he did. just added a few more details around the waist, and some around wrists. did a re-paint.](userimages/customs/35000/34998-1.jpg) Guy V2 Street Fighterby crowmagnumAfter some time to think and a bothersome mind, I finally did a redo on my first custom Guy, I must say he looks a lot better then he did. just added ...2 comments | ![[Deejay] Okay! Okay! Yeah! i know its all been done before!..But today i made the last street fighter 2 character!..this is a landmark in my project! my mind!..lol I know the paint job isnt tip top,an the sculp may be a crappy in some areas in comparison to the other deejay customs. Im just so proud i actually have him finished. I was trying to get as cloe to the prototype by sota as possible, I used NECA ken. I tried to keep his skin kind of a dark cocoa but not to dark, I made the shoulders alittle bit bigger around the neck. i used sota cammy pony tail, sliced in half,( had to use other straned for lee).enjoy](userimages/customs/35000/34901-1.jpg) Deejay Street Fighterby crowmagnumOkay! Okay! Yeah! i know its all been done before!..But today i made the last street fighter 2 character!..this is a landmark in my project! my mind!....9 comments |
![[Sean] Taking a break from street fighter 1, this is a Pretty basic design. cant say its an original, but its really the only way to go if you want to make a custom of this dude. Basically the head comes from DC green lantern John Stewart, the hair was sculted, the base figure was from Sota evil ryu, (why on earth would i ruin a regular ryu). re-paint then its done. Idk, may try to figure out a different recipe and re-try it. enjoy](userimages/customs/35000/34900-1.jpg) Sean Street Fighterby crowmagnumTaking a break from street fighter 1, this is a Pretty basic design. cant say its an original, but its really the only way to go if you want to make a...6 comments | ![[Rolento] Also by request, Rolento. I Used Dc Classics Super Friends Legion OF Doom Lex Luthor. This Base figure was an ace in the hole. basically all i did was sculpt the beret and the grenade vest and took a wooden paint brush broke it in half/painted it and made his beating stick baton. the rest was just a re-apaint. he even came with the grenades.](userimages/customs/35000/34855-1.jpg) Rolento Street Fighterby crowmagnumAlso by request, Rolento. I Used Dc Classics Super Friends Legion OF Doom Lex Luthor. This Base figure was an ace in the hole. basically all i did was...5 comments |
![[Hugo Andore] By request, Hugo! This big guy is also not an original idea, stole the base design from koolcutta, Thanks
this base figure doesnt get any closer to Hugo's build. ML smart hulk is the base figure. re-sculpted the face to give him that freakish caveman look, the hair is from LCBH Ann O'brian. did a basic paint job. really was trying to go for the Final Fight look.](userimages/customs/35000/34854-1.jpg) Hugo Andore Street Fighterby crowmagnumBy request, Hugo! This big guy is also not an original idea, stole the base design from koolcutta, Thanks
this base figure doesnt get any closer to H...5 comments | ![[Charlie Nash] Not An original, actually got the idea from another brilliant customizer, the only thing original about this custom is the watch peice, i transplanted it from the resaurus charlie. Basically just a NECA guile body (comiccon exclusive) and resaurus charlie head.. a slight re-paint on the vest and body to give it that original charlie nash look and whammmooo.](userimages/customs/35000/34853-1.jpg) Charlie Nash Street Fighterby crowmagnumNot An original, actually got the idea from another brilliant customizer, the only thing original about this custom is the watch peice, i transplanted...6 comments |
![[Lee] Going once again, where no man has gone before, Ive created yet another original character from the first street fighter game, Lee. Lee was a simple custom, basically just a repaint of sota gen w/ a few mods here and there. I used the head of DC classics samuria.](userimages/customs/35000/34851-1.jpg) Lee Street Fighterby crowmagnumGoing once again, where no man has gone before, Ive created yet another original character from the first street fighter game, Lee. Lee was a simple c...9 comments | ![[Guy] This one isnt an original, basically like the others its fei long body w/ LCBH anne O'brian shoes, the only thing i did differently was re-sculpted the facial features.](userimages/customs/35000/34829-1.jpg) Guy Street Fighterby crowmagnumThis one isnt an original, basically like the others its fei long body w/ LCBH anne O'brian shoes, the only thing i did differently was re-sculpted th...7 comments |
![[Retsu] Well since nobody else has done him, I decided to customize a Retsu figure, one of the original OG's from the original Street Fighter. This one was used from a Sota SF: Akuma. the head was LCBH savage aswell as the arms. the karate gee was completly sculpted on the arms with epoxy.](userimages/customs/35000/34803-1.jpg) Retsu Street Fighterby crowmagnumWell since nobody else has done him, I decided to customize a Retsu figure, one of the original OG's from the original Street Fighter. This one was us...7 comments | ![[Alex] The recipe isn't all that original, however i think im the first on this website to actually pull this one off. I used (savage dragon upper and lower torso), next i used (Hulklings harms and legs). It was not an easy task had to uses lots of super glue and epoxy sculp. I used (Guile from jazwares head) An idea i burrowed from another brilliant customizer on here. I also used some spare parts such as: suspenders and some hair from (Resaurus Alex) worked perfect, used wire ribbon for the bandana. The rest was sculpted. Thanks](userimages/customs/35000/34802-1.jpg) Alex Street Fighterby crowmagnumThe recipe isn't all that original, however i think im the first on this website to actually pull this one off. I used (savage dragon upper and lower ...2 comments |
|