![[Sauron] Finally I've done a custom sauron!! Here I totally resculpted the face getting rid of the teeth sculpting worry lines on head details on the mouth to blend in the sculpting to the head. I wanted to give it natural look, not a forced look, I also blended the sculpt on to the arms adding circles dots on the apoxie as a way to add some detail to the blending in the apoxie to wing. I also used minni zip ties to secure the wings on the arms. I also added night crawlers tail with some sculpting to blend in the tail to the body. Then finally just full repaint of body using 3 different greens to blend to give him a detailed look. I hope you like him, and as always comments are more than welcomed. Thanks for looking!!](userimages/customs/18500/18186-1.jpg) Sauron Marvel Legendsby GOLIATH_CUSTOMSFinally I've done a custom sauron!! Here I totally resculpted the face getting rid of the teeth sculpting worry lines on head details on the mouth to ...9 comments | ![[Goblin of the Evil-eye of Sauron] I sculpted his head,sheild & helmet from clay-stone. I sculpted his weapons & sheath with sculpey. I made his hair & jib from a black pom-pom. I painted all sculpted parts with accrylic paints. He wears a ctvt cochise shirt,ctvt fonz boots,& ctvt strech pants.](userimages/customs/16500/16113-1.jpg) Goblin of the Evil-eye of Sauron |
![[Uruk-hai of the Evil Eye of Sauron] I sculpted his helmet,helmet-mask,weapons,sheild & sheaths from clay-stone. For his head I sculpted over a ctvt little john head with sculpey. I painted all sculpted parts with accrylic paints. His outfit,armour boots(I dyed black with rit),& cape are from ctvt.](userimages/customs/16500/16040-1.jpg) Uruk-hai of the Evil Eye of Sauron Lord of the Ringsby YokaiJohnI sculpted his helmet,helmet-mask,weapons,sheild & sheaths from clay-stone. For his head I sculpted over a ctvt little john head with sculpey. I p...0 comments | ![[Sauron] This one has been finished for quite a long time....
Anyway, it is pretty much the same recipe everyone uses. SMC Ultimate Lizard cleaned up a little. Wings are from annihulus. They were trimmed quite a bit and attached wrist to elbow because I didn't like the look when they were just attached at the wrist. This makes it look a bit more like how Legends have don the wings (falcon, vulture). The head was sculpted with sculpey. Full paint](userimages/customs/16000/15919-1.jpg) Sauron Marvel Legendsby BurchCustomsThis one has been finished for quite a long time....
Anyway, it is pretty much the same recipe everyone uses. SMC Ultimate Lizard cleaned up a littl...2 comments |
![[Sauron] This was my first custom I ever completed only a few short months back. Recipe has been done before but I don't like the way the lizard head looks. So I sculpted my own over a fisher price dino head. Attached Annihulus wings and sculpted torn shorts. Paint was games masters on this one](userimages/customs/16000/15862-1.jpg) Sauron Marvel Legendsby NovafalconThis was my first custom I ever completed only a few short months back. Recipe has been done before but I don't like the way the lizard head looks. ...2 comments | ![[Sauron] Well i bought a man bat figure for a custom and the wings was left out the project, then i found a lizard figure and all the pieces fell together. The plastic of the wings is flexible so you can put it in any posse you want it. The head was sculpted, i atached the wings to the heands, arms and torso the way that sauron don´t loose any articulation, the skirt is from x-men classics magneto and the tail is from nightcrawler, and its complety poseable too. I gave him diferents shades of green but qith the picture you can't tell it. The wings was painted clear green so the color looks really great. Thanks for coming by.](userimages/customs/15000/14811-1.jpg) Sauron Marvel Legendsby thejoemxWell i bought a man bat figure for a custom and the wings was left out the project, then i found a lizard figure and all the pieces fell together. The...3 comments |
![[Sauron] You've seen him before, now here is my take on him! Even made a custom box for him... looks real, no?](userimages/customs/15000/14706-1.jpg) Sauron | ![[Sauron] -Sauron was made from an Ultimate Lizard figure from the Spider-Man Classics line. He retains all of his original articulation, even with those enormous wings that he's got.
-The wings come from the Annihilus BAF. They are modified to fit onto the arms. They are attached on the forearms (but not the wrists) so that he can retain all of his articulation that the figure originally had. I was never a fan of the small wings that Sauron is shown to have. So I wanted to beef it up a little, so I went with the Annihilus wings.
-The head was sculpted on in order to get the correct look. The pictures don't show it very well, but the sculpting on the head is textured a bit to help it look kind of scaley.
-Then of course there's a new paint job pretty much head to toe. A few different shades of Green along with some lighter green dry brushing.
Hope you guys like. Let me know what you think.](userimages/customs/14500/14056-1.jpg) Sauron Marvel Legendsby worldwar_hulk-Sauron was made from an Ultimate Lizard figure from the Spider-Man Classics line. He retains all of his original articulation, even with those enormo...1 comments |
![[Sauron] I found a Man Bat figure in a clearance bin at a comic convention and thought with a little work, I could finally have the Sauron figure Hasbro keeps denying all of us. He is the reason the Avengers got back together after "Disassembled".
First step was to get rid of Man Bat's head along with all the fur on his arms, legs, back, and chest. Then a re-sculpted Ultimate Lizard head was added along with a torn lab coat made from Doc Ock's lab coat. Then a full repaint from head to toe in Citadel paints. Even painted all the veins on his wings which really make this figure enormous in size.](userimages/customs/13500/13158-1.jpg) Sauron Marvel Legendsby StEvOtoysI found a Man Bat figure in a clearance bin at a comic convention and thought with a little work, I could finally have the Sauron figure Hasbro keeps ...5 comments | ![[Sauron] took a lizard figure cut off neck and head fin then dremmeld holes into back sculpted anhilus wings onto him as well as the beak thanx 4 looking](userimages/customs/13000/12990-1.jpg) Sauron Marvel Legendsby fallentook a lizard figure cut off neck and head fin then dremmeld holes into back sculpted anhilus wings onto him as well as the beak thanx 4 looking...0 comments |
![[Sauron] Friends I present sauron
is very, very real. . . Dinosaur and man ! ! !
body: man bat
head : theranodonte jurasicc park iii
wings : theranodonte jurasicc park iii (8 inches)
check! !](userimages/customs/12500/12006-1.jpg) Sauron Marvel Legendsby julinestrozaFriends I present sauron
is very, very real. . . Dinosaur and man ! ! !
body: man bat
head : theranodonte jurasicc park iii
wings : theranodonte jur...0 comments | ![[Sauron] An addition to my gallery of rouges. No toy release yet and not much customs done on this character.
Recipe
Base Figure: SMC Ultimate Lizard
Head: Sculpted beak and horn
Wings: ML Inhuman Torch
Tail: XMC Nightcrawler
Feet: XMC Nightcrawler](userimages/customs/11500/11343-1.jpg) Sauron |
![[Sauron] It's not a new recipe but I still wanted to do my interpretation of Dr Lykos especially after scoring me a Savage Land set! I sculpted the beak and head and shaved off the fin and lever. I removed the ball joints from a pair of Annihilus wings and after lots of experimentation fixed them directly to the arms themselves. He got an all over drybrush with snot green to match the wings and he supports his own weight standing up too!](userimages/customs/9500/9369-1.jpg) Sauron Marvel Legendsby WingsIt's not a new recipe but I still wanted to do my interpretation of Dr Lykos especially after scoring me a Savage Land set! I sculpted the beak and he...6 comments | ![[Sauron] Needed a sauron figure to go with the savage land box set,hoping to get one.sorry about bad pics will retake a little later when it is not so late.painted black then two shades of green,then blue on pants,then finishing touches.
head and wings-jurrasic park toy
body-tna kevin nash figure
feet-mtv lizard
tail-nightcrawler
arms-mojo
comments welcomed .thanks for looking](userimages/customs/9000/8959-1.jpg) Sauron X-Menby SkimanNeeded a sauron figure to go with the savage land box set,hoping to get one.sorry about bad pics will retake a little later when it is not so late.pai...2 comments |
![[Sauron] We used a BlackHeart body and Mojo arms legs from a Star Trek figure and the Head is from a Jonny Quest toy. I did a lot of different greens on him so he wasn't boring. Hope you like](userimages/customs/8000/7993-1.jpg) Sauron Marvel Legendsby boskoesWe used a BlackHeart body and Mojo arms legs from a Star Trek figure and the Head is from a Jonny Quest toy. I did a lot of different greens on him so...3 comments | ![[Sauron] Hi guys, also finished my Sauron custom. It took me quite a lot of time to finish this figure. I used DC Manbat as the base; extended the wings up to the upper arms, body was modified to make it look like form the savage land. The head is incidentally taken from the arms of a robot Crab’s pincher from Transformers Beast War found in our stock room. Hahaha. Fortunately, the pincher acted as the mouth and the arm was also ball jointed, I did a slight modification to fit it into the neck. The tail was also custom made. Thanks for looking. Hope you like it.](userimages/customs/6000/5604-1.jpg) Sauron Marvel Legendsby wilpacHi guys, also finished my Sauron custom. It took me quite a lot of time to finish this figure. I used DC Manbat as the base; extended the wings up to ...4 comments |
![[Sauron] base figure donated body and legs, but wings and head came from jurassic park dinos ...](userimages/customs/6000/5581-1.jpg) Sauron | ![[Sauron] Hi guys hear is a custom lizard made for a friend of mine, useing the same old method, lizard, wings are from mega blocks dragon, and paint and sculp on the mouth and nose.
I found it realy hard to put the wings and the arms together, so I just attached from the back .
thanks for looking](userimages/customs/5500/5399-1.jpg) Sauron X-Menby snobticHi guys hear is a custom lizard made for a friend of mine, useing the same old method, lizard, wings are from mega blocks dragon, and paint and sculp ...0 comments |
![[Sauron] this figure took a long time to get complete,and also long time to post it here( it was finish like 6 moths ago). the body was really simple but my problem was in the wings.... I try diferent things but I was never happy, until a saw annihilus. the wings were the rigth size, now I needed to figure out how to attach it to my figure... and then a saw another figure with wings... FALCON!!!! I change the biceps on both figures ( they were actually the same size) and then I dremel the wings until they fit in the annihilus' wings. I hope you like it.](userimages/customs/5000/4750-1.jpg) Sauron Marvel Legendsby maromasthis figure took a long time to get complete,and also long time to post it here( it was finish like 6 moths ago). the body was really simple but my pr...5 comments | ![[Sauron] A toy dinosaur, bought from a garage sale, was used for the main body. The arms/wings were from a Dark Knight Manbat fig. and the legs/tail were from a Mcfarlane Horrid figure. Some vinyl was attached and sculpted over the arms to lengthen the wings and allow them to bend. Sauron measures 9 inches tall and has a 12 inch wingspan with articulation in the elbows as well as swivel forearms - allows for great range of movement. Wolvie is included in this picture to show a sense of scale and also deal with some unfinished business.](userimages/customs/4000/3661-1.jpg) Sauron Marvel Legendsby N TTA toy dinosaur, bought from a garage sale, was used for the main body. The arms/wings were from a Dark Knight Manbat fig. and the legs/tail were from ...6 comments |
![[Sauron] Karl Lykos was the son of an explorer's guide. As a teenager, he accompanied his father to Tierra del Fuego as the elder Lykos guided a weathy client named Mr. Anderssen and Anderssen's young daughter Tanya. While defending Tanya from mutant pterodactyls, Karl was bitten by one of the creatures. During his recovery, he discovered that he could now drain the life-force of other organisms. He found himself repeatedly tempted to use his new power.
When Karl's father died, Mr. Anderssen took Karl into his home in thanks for rescuing Tanya. As the years passed, Karl and Tanya fell in love. But Tanya's wealthy father would not allow her to date Karl because of his lack of wealth. In an effort to win Mr. Anderssen's support, Karl went to medical school and became a physician. He treated patients through hypnosis, but secretly robbed them of energy at the same time.
Dr. Lykos was a colleague of Professor Charles Xavier, and first encountered the X-Men when they sought treatment for Havok. Wh](userimages/customs/3000/2842-1.jpg) Sauron Marvel Legendsby knightmare69Karl Lykos was the son of an explorer's guide. As a teenager, he accompanied his father to Tierra del Fuego as the elder Lykos guided a weathy client ...2 comments | ![[Sauron] I wanted sauron and saw a few ways to create him
I bought an extra herc and banshee (lucky I can use them) for the wings of anny
then I sculpted the head fin and sculpted the arms to the wings and then
dremeled some out of place things
then repainted him - not a+ but it is sauron](userimages/customs/3000/2636-1.jpg) Sauron Marvel Legendsby BYGTOPPI wanted sauron and saw a few ways to create him
I bought an extra herc and banshee (lucky I can use them) for the wings of anny
then I sculpted the ...4 comments |
![[Sauron] Kyle's Sauron, D.O.B. 12/17/06. ANOTHER custom for.. you guessed it... Good ol' Chad Lee. My customs are getting too complicated to give full description of how I made them so if I leave something out you wanna know just ask. His wings are jointed and have full range of motion. enjoy
Recipe:
~ SMC Ultimate lizard base.
~ shortened tail and scored with epoxie sculpt.
~ sculpted head parts
~ Full repaint.
~ Sculpted club.](userimages/customs/1500/1375-1.jpg) Sauron Marvel Legendsby Kyle RobinsonKyle's Sauron, D.O.B. 12/17/06. ANOTHER custom for.. you guessed it... Good ol' Chad Lee. My customs are getting too complicated to give full descript...2 comments | |
|