![[The Batman] I didn't have any fodder left, so I used parts from my old customs here on Figure Realm to make my own version of the Dark Knight!
Not a very sophisticated version...no bells and whistles (or should I say 'Bat'-bells or 'Bat-whistles')...just a very simple recipe:
Upper body: All ML Taskmaster. Removed chest plate, filled the holes and re-sculpted chest. Sculpted bat symbol kind of old school design. Trimmed down gloves. I was in the process of adding the blade things to his gloves but ran out of time
Upper Legs: ML FaceOff Daredevil
Lower Legs: Tasky
Boots and belt buckle: Ml Ult Cap
Cape: Modded Arkham City Batman
Head: Sculpted cowl over Young Justice Red Arrow
After this posts, going back to mold and cast the hip, elbow and shoulder joints to avoid paint rub. Also working on a wire cape idea that I've seen used by other customizers here.
Thanks for looking!
If you like what you see, please check out my other customs.](userimages/customs/49000/48975-1.jpg) The Batman Marvel Legendsby infamous22I didn't have any fodder left, so I used parts from my old customs here on Figure Realm to make my own version of the Dark Knight!
Not a very sophist...26 comments | ![[Batman] I was very excited for this batman when it came out. Until I received the figure I realized it had some problems. The first major part are the legs. They were way too long so I cut the down. I also like my batman figures to be blue so I gave him a blue wash. I like this version much more than the actual one, hope somebody comments on this. -cole](userimages/customs/49000/48972-1.jpg) Batman |
![[Batman New 52 (beyond Variant)] This is the New 52 Batman in the Future. The new Batman suit already looks very futuristic and it only is likely that Bruce would use this as his base when upgrading to th beyond suit. So in some ways this is the prototype to the future suit.](userimages/customs/49000/48955-1.jpg) Batman New 52 (beyond Variant) DC Directby To be revealed. . . This is the New 52 Batman in the Future. The new Batman suit already looks very futuristic and it only is likely that Bruce would use this as his base...0 comments | ![[Arkham Mad Hatter Batman] I thought the Mad Hatter Batman was a cool concept so I decided to try to make one myself. I think it turned out pretty good. Let me know what you think. I started with a Series 3 Arkham Batman and used a lot of Apoxy Sculpt around the face. The face is the only place I did any molding. The rest of the figure is stock. I then painted the necessary places eyes, teeth (thats about it) then let it dry.
Thanks for looking.](userimages/customs/49000/48900-1.jpg) Arkham Mad Hatter Batman DC Directby AFCustomI thought the Mad Hatter Batman was a cool concept so I decided to try to make one myself. I think it turned out pretty good. Let me know what you thi...15 comments |
![[Arkham Asylum Armored Batman] 2 years ago, I found a CG Armored Batman. I really like the design, and popped up an idea in mind, I must make a custom-made 7" figure that looked exactly like the one in the CG image.
It took me more than 2 years to complete this task. Actually, I only worked on it if I was in free time and with good mood.
Whenever I found new information from the web, I would destroy the original built part and sculpt again. This was the reason that makes whole progress totally behind the schedules.
Back to my custom figure, I used a ML12 Iron Fist as the base, gloves and boots were from ML FF Movie Mr. Fantastic. The cape was from DCD Arkham City 1 Batman Infected.
Other than mentioned above, head to toe body was sculpted with Magic Sculpt.
I knew in the market already got other 2 Armored Batman. The Play Arts Kai: Batman Armored was too large in size. DCD AA Armored Batman's details were not that looked like the one in the CG image.
Anyway, I really feel happy enjoy the whole custom pro](userimages/customs/49000/48898-1.jpg) Arkham Asylum Armored Batman Batmanby Hunter R2 years ago, I found a CG Armored Batman. I really like the design, and popped up an idea in mind, I must make a custom-made 7" figure that looke...38 comments | ![[Batman] This is my custom Batman. I used a DC Universe batman body and 95% completely sculpted over the base. I wanted to give as much detail, wrinkles, texture muscle as I can, I also sculpted the cape to his shoulders so it would looks like it dripping down his shoulder but still maintain the shoulder articulation.I gave him ton of accessories and a custom base.
The design is loosely based on Play Arts Dark Knight Return Batman.](userimages/customs/49000/48891-1.jpg) Batman D.C. Universeby To be revealed. . . This is my custom Batman. I used a DC Universe batman body and 95% completely sculpted over the base. I wanted to give as much detail, wrinkles, textu...6 comments |
![[Batman of Zur-En-Arrh] I recently read Batman: R.I.P. and I loved Bruce Wayne having a backup personality, and I loved the concept of Batman of Zur-En-Arrh, so it was like my best friend as a customizer. I'm aware that R.I.P. wasn't the first appearance of this particular design but I loved it more in this one because it was so much more grittier. The base is Ricky Steamboat with kinda dry sculpted stitching on his right arm, sculpted on torn sleeves and gloves, and a Kano head with a fully sculpted cowl. I used a Hope Summers cape along with a second Hope cape and a Batman: Arkham City cape. (modified to look worn of course)The belt is fodder, except for the Bat-Radia, which is sculpted. The bat/club is from fodder, wrapped with plumbing tape and painted. Hope you like it!](userimages/customs/49000/48841-1.jpg) Batman of Zur-En-Arrh Batmanby To be revealed. . . I recently read Batman: R.I.P. and I loved Bruce Wayne having a backup personality, and I loved the concept of Batman of Zur-En-Arrh, so it was like m...2 comments | ![[Batman beyond Mega Bloks] Sculpt head, Iron man parts and paint.](userimages/customs/49000/48823-1.jpg) Batman beyond Mega Bloks |
![[Batman beyond] This is the look of the "older" beyond suit Terry wears in Batman Beyond Unlimited #10. I wanted to make this llok ever since I saw it in the book, and I just needed the right parts. I had an extra Unmasked Batman Beyond I got for $2 loose at my LCS. I took the head and cape from a Young Justice Batman. Painted the interior red and the red all black. The symbol came out really orange in the photos but the reds are much closer in person. I like how the YJ head makes it look like it could be a Bruce version of the suit.](userimages/customs/49000/48791-1.jpg) Batman beyond DC Universeby To be revealed. . . This is the look of the "older" beyond suit Terry wears in Batman Beyond Unlimited #10. I wanted to make this llok ever since I saw it in t...1 comments | ![[Batman the Dark Knight Rises in the Dark Knight Re] This figure is pretty basic. Just took an old Marvel Legends Bishop and chopped off the hair, the face, and the yellow lines that run down his leg. Then proceeded to sculpt over his arms, forearms, abs, chest, face and cowl and added a cloth cape for good measure. This is basically my take on what Batman might look like if the Nolanverse and The Dark Knight Returns universe were to ever collide. He's a piece that accompanies my Bane custom in that regard.](userimages/customs/49000/48781-1.jpg) Batman the Dark Knight Rises in the Dark Knight Re DC Universeby JinzinThis figure is pretty basic. Just took an old Marvel Legends Bishop and chopped off the hair, the face, and the yellow lines that run down his leg. Th...12 comments |
![[Batman] Used a ROML Piledriver as the base fig. I sculpted the boots and the bat symbol on his chest. I sculpted the buckle and added LCBH Super Patriot's belt pouches to Pikedrivers belt. I used LCBH Marv's head and sculoted the mask and erased some of the texture on his face. Used DCU Catman's cape. Dry brushed the gray onto black underpaint and airbrushed highlighs of light blue pnto the black.](userimages/customs/49000/48714-1.jpg) Batman DC Universeby masterpieceUsed a ROML Piledriver as the base fig. I sculpted the boots and the bat symbol on his chest. I sculpted the buckle and added LCBH Super Patriot's bel...4 comments | ![[Steampunk Batman] "I saw him gliding across the tops of zeppelins that night, an iron shadow with gnashing gears and scalloped wings of copper." ---Gothaven City Resident
As promised I'm expanding my DC Steampunk line with more characters and the Brass Knight himself, Batman is up next. Batman's story is set in an alternate timeline within the city of Gothaven with the Joker leading the clockwork soldiers from Clownstein Castle.
This custom Steampunk Batman was created from a Marvel legends Steve Rogers upper body, DC Direct Batman head, and Marvel Legends Punisher lower legs. All the armor/goggle/detail was hand-sculpted with Aves Studio's Apoxie Sculpt and real leather straps were used. The clockwork wingpack was created from fodder parts including two dark blue wing sections from some other Batman toy and cabled throttle controls. His grappling gun was made from a Gears of War Locust gun. Real metal gears and brass fixings were also used to bring this Steampunk Batman figure to life. I h](userimages/customs/49000/48693-1.jpg) Steampunk Batman D.C. Universeby Jin Saotome"I saw him gliding across the tops of zeppelins that night, an iron shadow with gnashing gears and scalloped wings of copper." ---Gothaven C...46 comments |
![[Steampunk Batman] I have always wanted to try my hand at a “Steampunk” style figure, so I figure why not start with the Dark Knight himself?! This is Batman all decked out in his alternate universe Steampunk duds. Batman comes with a set of removable goggles, a detachable jet pack, and a custom painted steampunk grapple/floodlight gun! And check out his bad @$$ utility belts with enough pockets to house anyone who has ever been a Robin!!!
I do believe this is the most fun I have had on a figure yet! He was a blast, and I love how he turned out.
He was a Dr. Midnight base, DCD Batman head, Atom arms, Bane legs, YJ Batman hands, a lot of ML and DCUC fodder, and a custom paint job.
See you in the future!](userimages/customs/49000/48691-1.jpg) Steampunk Batman | ![[Batman: Arkham City Diorama] Here's my new and improved Arkham City diorama. I felt my old diorama looked a little too bland so I decided to make this new one much more detailed.
It's basically the same recipe as the old one, lots and lots of strong card and printed out textures. The only non-custom pieces are the fencing and girders on the right. Everything else is card. I made sure to leave plenty of space on the right hand side for the upcoming 13" Grundy figure who should fit nicely behind Croc there.](userimages/customs/49000/48680-1.jpg) Batman: Arkham City Diorama Batman: Arkham Cityby SFAHere's my new and improved Arkham City diorama. I felt my old diorama looked a little too bland so I decided to make this new one much more detailed.
...39 comments |
![[Nightmare Batman] this is my version of Nightmare Batman a.k.a the Vampire batman from the Batman: Red Rain
I didn't like the comic version of batman red rain, so i decided instead using the comic version, I choose to make him more demonic-like version. Enjoy guys.
P.S. I'm sorry if the picture little bit blurry.. my bad.. :)](userimages/customs/49000/48675-1.jpg) Nightmare Batman | ![[Dark Knight | Batman W/ Wired Fabric Cape] I have revisited this new application with Bats to let you in on a tutorial on my Tube Channel: GeekSummit.
This figure features the standard pull through cape now with wiring. This time I did accentuate some of the scallops by folding tape into the cape to give some of the points more definition when standing. Figure was also completely painted over with a mix of flat black and oily steel. It gave it a nice matte graphite tone.
Thanks again Fitz for the inspiration. Hopefully well see a revolution in our craft after sharing my process.](userimages/customs/49000/48634-1.jpg) Dark Knight | Batman W/ Wired Fabric Cape Movie Mastersby GeekSummitI have revisited this new application with Bats to let you in on a tutorial on my Tube Channel: GeekSummit.
This figure features the standard pull t...5 comments |
![[Batman] Returning from a hiatus, I gave my Batman figure a few new modifications.
The cape is from the series 4 Arkham City Batman and I repainted the head to match.
Best of all, I've been practicing adding articulation to DC Direct figures, so he get new swivel-hinge arms (much preferred over separate swivels and hinges).
Enjoy!](userimages/customs/49000/48579-1.jpg) Batman DC Directby Redshift4Returning from a hiatus, I gave my Batman figure a few new modifications.
The cape is from the series 4 Arkham City Batman and I repainted the head to...5 comments | ![[Batman beyond] I was never a major fan of Batman Beyond, but I did always like his look. Saw some great ones in the past on here, but never got around to making one of my own. I was looking this past week and realize I had a spare set of Spiderman 2099 arms, and those would be perfect for him. I used the Scarlet Spider body since his belt looked fairly accurate, then pulled out one of my Batman cast heads. Did some joint sanding, then sanded down the head so it would look like a full mask, then smoothed out some of the brooding wrinkles on his forehead. Took a few tries, but I finally got the emblem on his chest fairly evened out, as well. I like the build, and quite happy with how well he came out.](userimages/customs/49000/48537-1.jpg) Batman beyond DC Infinite Heroesby DravenheartI was never a major fan of Batman Beyond, but I did always like his look. Saw some great ones in the past on here, but never got around to making one ...4 comments |
![[Batman (Dark Knight Returns Frank Miller Style)] Just a repaint of the new Batman Unlimited DKR Batman. I also shaved some joints and neck to add articulation. Dry brushed his muscles and added the blue to be more a more accurate look of the series. Thanks for looking and enjoy.](userimages/customs/48500/48446-1.jpg) Batman (Dark Knight Returns Frank Miller Style) | ![[Batman Damian Wayne] I have to believe deep down that DC has a huge Lazarus Pit in store for Damian Wayne. Not only is he maybe the best Robin to date, but the future version of him as Batman is one of the coolest things ever. I have been wanting to do this version of Batman/Damian for a while, and it blows my mind that no one has attempted this figure yet. I love the trench coat design to the Bat costume, and the giant utility belt. I really hope we get to see more stories featuring Damian’s future as Batman.
He was a Toyman body, Bats New 52 head, Bats boots, gloves and belt, Jonah Hex arms, Nick Fury coat, sculpted parts and custom paint job.
See you in the future!
AC](userimages/customs/48500/48392-1.jpg) Batman Damian Wayne D.C. Universeby ACCustomFiguresI have to believe deep down that DC has a huge Lazarus Pit in store for Damian Wayne. Not only is he maybe the best Robin to date, but the future vers...14 comments |
![[BATMOBILE TUMBLER, BATPOD & BATMAN beyond John] I started by disassembling the Vehicles, and removing ALL the electronics from the Batmobile, I sculpted over the holes left by the red buttons. The next step was to sculpt the Batman Beyond symbols on the car and Bat-pod; I sanded down any imperfections followed by a coat of primer, meanwhile I remodeled the Batman Figure by trimming the excess accessories on his belt, and sanded down the mask, I paint him in flat black with the red Batman logo on his chest.
Once the primer was dried on the vehicles, I applied two coats of metallic black automotive paint, painted the details inside the Batmobile,(leather finish for the seat, and different colors for the instruments panel), the next step was the gold, chrome, and metallic red highlights on both the car, and the bike. I put them back together and finally a top coat of gloss clear to finish the job!!!](userimages/customs/48500/48362-1.jpg) BATMOBILE TUMBLER, BATPOD & BATMAN beyond John Batman Beyondby shakaI started by disassembling the Vehicles, and removing ALL the electronics from the Batmobile, I sculpted over the holes left by the red buttons. The n...3 comments | ![[Batman - the Dark Knight] Torso: ROC Impact Armour Duke
Head, Shoulder Pads, Belt, Cape & Gauntlets: DKR Batman
Lower Legs: ROC Crimson Viper
Fully articulated, minimal painting.](userimages/customs/48500/48346-1.jpg) Batman - the Dark Knight |
![[New 52 Batman beyond] Hey Realmers
So with all these great costume designs in the 52, thought I try it on a Batman Beyond concept. Its a 52 batman base with a re-sculpted TDKR Batman head, I also change the hand with a Justice league Bats then added some magnetic wings.
Cheers](userimages/customs/48500/48309-1.jpg) New 52 Batman beyond Dark Horseby nuffsaidHey Realmers
So with all these great costume designs in the 52, thought I try it on a Batman Beyond concept. Its a 52 batman base with a re-sculpted T...10 comments | ![[Batman Richard Grayson] This is my second go at Richard Grayson as Batman. I wanted a more heroic and action oriented version of the figure. After all, Richard is all about action! This was a great era of Batman, and I made sure to capture it as accurately as possible, including his double gauntlets, and gold sculpted belt. Along with Grayson’s trademark batons, I think this head sculpt really nails down the character.
Richard was about 4 different DCUC and DCD Batman parts, sculpted belt, and custom paints.
See you in the future!
AC](userimages/customs/48500/48125-1.jpg) Batman Richard Grayson D.C. Universeby ACCustomFiguresThis is my second go at Richard Grayson as Batman. I wanted a more heroic and action oriented version of the figure. After all, Richard is all about a...7 comments |
![[Batman] Here Is A Restoration On A Batman Figure That Was Found In My Backyard. He Is Not Finish He Need Paint And A Cape But I Wanted Every One To See Him Befor. Enjoy :)](userimages/customs/48500/48124-1.jpg) Batman Batman & Robinby inuyasha82Here Is A Restoration On A Batman Figure That Was Found In My Backyard. He Is Not Finish He Need Paint And A Cape But I Wanted Every One To See Him Be...6 comments | ![[ROBIN DAMIAN WAYNE Batman's Son Talia's Son] Love this character, sorry they killed him! Although my here have rendered different versions of him, the fact that he has being buffed up didn't make sense to me. A 11 years old brat with muscles like Batman never convinced me. I like the Batman Inc. version of him but its too expensive. So I decided to customize him...
Body" X-23 (shaved of her chest and sanded it down)
Head: MOTU 2000x Prince Adam (drilled the head to fit the neck of X-23 & sculped the hair)
Boots: DCUC Stargirl
Added a cloth cape](userimages/customs/48500/48084-1.jpg) ROBIN DAMIAN WAYNE Batman's Son Talia's Son Marvel Legendsby optimusleoLove this character, sorry they killed him! Although my here have rendered different versions of him, the fact that he has being buffed up didn't make...4 comments |
![[Batman] I wanted to make a proper Batman to display with my MU figures because DCIH was awful. I got this idea from another customizer and bought his cast head. Let's hope one day Mattel will come to their senses and produce a 4 inch line that rivals Hasbro's...but I'm not holding my breath on that one.
recipe: MU cyclops, Darth Vader cape, cast head.](userimages/customs/48500/48058-1.jpg) Batman DC Infinite Heroesby figcolexI wanted to make a proper Batman to display with my MU figures because DCIH was awful. I got this idea from another customizer and bought his cast hea...4 comments | ![[Batman] Head and cape from SDCC 2008 Batman, hands from the Batman Inc. figure. Used the black version of the DC Universe Arkham City Batman for the base.](userimages/customs/48500/48036-1.jpg) Batman |
![[Arkham City Batman | Easy Hip Articulation] Bought a couple over the last couple weeks as I saw them available. I didn't want to be without one if something bad happened. I first scored over the tops if the hips trying to trace the inner ball with my exacto. I made a notch as wide as my metal cylinder dremmel bit. I bored into the hips knocking the notch free to move. That released the ball from the socket. Then I cleaned up the joints with a trimming of the exacto and then repainted using "oily steel" in a mostly black mixture. I painted both upper thighs and the briefs. The color was a pretty dead on match.
I popped the legs back on it was good to go. It was a good attempt so I made 2 more while I still had paint mixed.](userimages/customs/48500/48013-1.jpg) Arkham City Batman | Easy Hip Articulation | ![[Bruce Wayne in Batman beyond Suit] A customer wanted a figure of Bruce Wayne in the Batman Beyond suit and this is what I came up with, alot of sanding on the face to get rid of the mask lines and a repaint.](userimages/customs/48000/47985-1.jpg) Bruce Wayne in Batman beyond Suit |
|