![[Young Conan the Cimmerian] Conan has not left Cimmeria yet. He is young and his body is not as bulky as it will become years later. Now is having a rest after the Venarium battle where he killed many Gunderians and Aquilonians.
He is maybe thinking about leaving the land where he was born and seeking adventures as his grandfather did. The legend begins, but that's another story...
I used Hot Toys Perseus as a base for this custom. I made scabbards, boots, belts and cloths from several leather pieces. Used Barbie's hair.
-Sword: Enterbay
-Dagger: Ignite
-Axe: Marto
Custom made plinth too.
Hope you like it!!!](userimages/customs/26500/26271-1.jpg) Young Conan the Cimmerian Conanby AnesesConan has not left Cimmeria yet. He is young and his body is not as bulky as it will become years later. Now is having a rest after the Venarium battl...0 comments | ![[Conan] Took guile upper body, head, arms and used an ml thor v3 lower body, hand painted entire figure (not as good as I would like). Thank you](userimages/customs/26500/26061-1.jpg) Conan Conanby venom01Took guile upper body, head, arms and used an ml thor v3 lower body, hand painted entire figure (not as good as I would like). Thank you...2 comments |
![[Conan the Destroyer] I dismake an old custom Conan to make this one. I painted body and head with acrilycs and made belt, scabbard, etc, with leather pieces.
Hope you like it!!](userimages/customs/26000/25572-1.jpg) Conan the Destroyer Conanby AnesesI dismake an old custom Conan to make this one. I painted body and head with acrilycs and made belt, scabbard, etc, with leather pieces.
Hope you like...3 comments | ![[Conan] First of I started with shaving the hair and then I tan the body and face ,sculpted the skull ,then added hair .one of my fav movies. the sword is a letter opener but it fits spot on. enjoy](userimages/customs/25000/24640-1.jpg) Conan Conanby ALUCARDFirst of I started with shaving the hair and then I tan the body and face ,sculpted the skull ,then added hair .one of my fav movies. the sword is a l...1 comments |
![[Conan the Barberian] Hey guys this is a custom conan the barberian, he was made from several pieces. Torso, arms, legs are from omega red, lower legs, and hands are from a wwf action figure, head is a neca, lots of painting, the boots were made from vinyl, painted and glued to him making it a realistic effect of the boots.
Hope you guys like him. Let us know...](userimages/customs/25000/24507-1.jpg) Conan the Barberian | ![[Conan Classic V.2] Same as version 1/ changed head to lcbh conan,added helmet from mcfarlane king conan. Thanks](userimages/customs/24500/24264-1.jpg) Conan Classic V.2 Conanby venom01Same as version 1/ changed head to lcbh conan,added helmet from mcfarlane king conan. Thanks...1 comments |
![[Conan the Slayer - Animated Style] Used to be hooked on those early Saturday morning macho cartoons: Hercules, He-Man, Thundarr the Barbarian! And never understood why they didn't make a cartoon version of Conan. So they finally came out with Conan: The Adventurer in the early 90's which ran a few episodes and even spawned a toyline from Hasbro. The cartoon was just not "man enough", and it didn't seem like Conan at all. Conan is supposed to be a thief, a killer, a womanizer, and this cartoon portrayed him as a monogamous, kind and caring person who refused to strike an unarmed opponent. It totally went against the grain of a true blooded Barbarian! Well, times have changed and cartoons nowadays certainly show much more violence. If the producers ever pick-up the series again, they should remake it into something darker - with more serpents, sorcerers, and half-naked jungle women! So here's a concept Conan figure done animated:
base: Skaar, son of Hulk, replaced hands from WWE
head: Streetfighter Alex
gear/we](userimages/customs/24500/24191-1.jpg) Conan the Slayer - Animated Style Conanby N TTUsed to be hooked on those early Saturday morning macho cartoons: Hercules, He-Man, Thundarr the Barbarian! And never understood why they didn't make ...3 comments | ![[Conan the Destroyer] Took an Elite series Batista Figure and sculpted the fur and part of the boots with milliput. Same thing with the leather wrist band. The metal wrist band is done with some aluminum strip embossed with a small nail (not to sharp)
The head is obviously a Neca Pitt fighter Conan.
The paint is airbrushed along the skin and the clothing is done with the traditional dry brush effect.
Some hours of continuous listening to Basil Poleduris's Conan Score and tadaaaaa!!!
daaaagdhdaaadddaaghaaaa... get dauuut!!!, our gentle barbarian Governor.
Thanks to kaneda186 for the help and Invincible-Toys for the Idea.](userimages/customs/24500/24036-1.jpg) Conan the Destroyer Conanby MetalAlchemistTook an Elite series Batista Figure and sculpted the fur and part of the boots with milliput. Same thing with the leather wrist band. The metal wris...12 comments |
![[King Conan V.2] Batista wwe base figure, neca conan pit fighter head, macfarlane king conan armor. King conan version 2. Thanks.](userimages/customs/24000/23622-1.jpg) King Conan V.2 Conanby venom01Batista wwe base figure, neca conan pit fighter head, macfarlane king conan armor. King conan version 2. Thanks....3 comments | ![[Conan Classic] Used a sota street fighter guile and castlevania simon belmont to bring this classic conan to life painted the figure with tamiya acrylic paint custom skin tone. Added fur & knife from scratch, macfarlane conan sword.](userimages/customs/24000/23546-1.jpg) Conan Classic Conanby venom01Used a sota street fighter guile and castlevania simon belmont to bring this classic conan to life painted the figure with tamiya acrylic paint custom...6 comments |
![[Sonja Red "Conan the Barbarian"] Hey guys, well this custom took me many hours to accomplish, at least 72 hrs. Lots of sculpting went into her from her boots, her gloves, shoulder pads, thigh armor, jewelery, etc. The straps on her boots are made from vinyl fabric. Her armor was all and made, I personally choose piece by piece and put it together like a puzzle, that was the difficult part, because it needed a lot or patience and to fit them all together; but I believe the time payed off very well. Like always she has been painted worth high quality materials and sealed for more protection. She has 2 weapons a sword and a small knife. This was a very fun custom to make. Hope you guys like her. Please comment and tell me what you think :)](userimages/customs/24000/23513-1.jpg) Sonja Red "Conan the Barbarian" | ![[Conan] Conan Frazetta version, figure base; Mr. Kennedy, the head was molded with epoxy and painted with acrylics](userimages/customs/23500/23494-1.jpg) Conan Conanby SatanazConan Frazetta version, figure base; Mr. Kennedy, the head was molded with epoxy and painted with acrylics...7 comments |
![[Savage Sword of Conan] This is a Conan based on John Buscema's artwork from the 1970's featured in the "Savage Sword of Conan" magazine. He is made from a Warpath body and a Punisher noggin.](userimages/customs/23500/23381-1.jpg) Savage Sword of Conan Marvel Universeby mikedThis is a Conan based on John Buscema's artwork from the 1970's featured in the "Savage Sword of Conan" magazine. He is made from a Warpath ...8 comments | ![[Conan] Sota sagat base fig...Ml morbius hair... Motu he man shield.... Lotr armor.... Viking spawn battle axe... Tamiya paint etc...](userimages/customs/23500/23228-1.jpg) Conan Conanby venom01Sota sagat base fig...Ml morbius hair... Motu he man shield.... Lotr armor.... Viking spawn battle axe... Tamiya paint etc......3 comments |
![[Conan the Barbarian] This figure is based on the new Sideshow Toys statue called Conan: The Prize. For the most part I really like Conan's look in the statue. There are a few aspects to it that I don't care for, so I did a few things differently. This figure was made using the LCBH Conan and parts from NECA's Conan, ML Loki, Realm of the Claw, McFarlane's Prince of Persia, and Mattel's Triklops. The armor on the forearms was made with Apoxie and doesn't hinder articulation, and the pauldron is attached with real leather. Thanks for looking.](userimages/customs/23500/23205-1.jpg) Conan the Barbarian Conanby kaneda186This figure is based on the new Sideshow Toys statue called Conan: The Prize. For the most part I really like Conan's look in the statue. There are ...3 comments | ![[Conan] Ka zar base fig, mccfarlane zeus loin cloth/sword, lcbh conan boots, chaos figure helmet.](userimages/customs/23500/23118-1.jpg) Conan Conanby venom01Ka zar base fig, mccfarlane zeus loin cloth/sword, lcbh conan boots, chaos figure helmet....0 comments |
![[Comic Book Conan] This is another one that's been sitting on the shelf, out of laziness, and should have been posted eons ago!
I wanted a big, hard@$$ Conan. The LCBH line just didn't cut it for me.
I found this wrestling figure loose on sale, and saw the Conan inside wanting to come out!
I started by altering the head. The nose was a little more bulbous than I wanted so I sanded it down. Then I shaved off the hair and sculpted it anew.
I swapped the right hand for DCUC Bizarro's. On the right arm, I made a leather band with straps, and for the left arm I stole a leather bracer taken from a McFarlane Conan that I Dremeled out to fit over his wrist.
The boots of the wrestler were cut off. Then I took the bottom of AoA Sabretooth's boots from the swivel peg down, and sculpted the rest of the boots onto Conan to match Sabretooth's fitting a peg hole for the bottom of boots. Then I painted the boots several coats, a base brown to start, a dark brown wash to get caught in the grooves, then a lighter](userimages/customs/23500/23007-1.jpg) Comic Book Conan Conanby pulpyfictionThis is another one that's been sitting on the shelf, out of laziness, and should have been posted eons ago!
I wanted a big, hard@$$ Conan. The LCBH...12 comments | ![[Conan the Rave-Arian] Mattel Triple H with parts from all 3 NECA Conan figs, NECA Simon Belmont boots, and painted to match skin tones. Oh yeah handmade cloth pants. And handmade glow sticks;) Check this out on Youtube if you don't already know what it is!
BORN TO BE ALIVE!!!!!!](userimages/customs/23000/22775-1.jpg) Conan the Rave-Arian Conanby kaneda186Mattel Triple H with parts from all 3 NECA Conan figs, NECA Simon Belmont boots, and painted to match skin tones. Oh yeah handmade cloth pants. And h...8 comments |
![[General Conan] Conan body with NECA Assassin's Creed hands, NECA Perseus lower legs and armor, Mattel Hawkman sword and shield, handmade leather sheath. Conan as a general in an army, perhaps Aquilonia or Khauran.](userimages/customs/23000/22770-1.jpg) General Conan Conanby kaneda186Conan body with NECA Assassin's Creed hands, NECA Perseus lower legs and armor, Mattel Hawkman sword and shield, handmade leather sheath. Conan as a ...5 comments | ![[Conan the Conqueror] He-Man With new hair, belt and cod piece. Battle scars, blood, new sword etc.](userimages/customs/23000/22643-1.jpg) Conan the Conqueror |
![[Conan the Barbarian] This figure was made using parts from NECA Conan, McFarlane Prince of Persia, and Mattel TriKlops figs. I wanted to make a fig of Conan that looked like he had just left some kind of military service and was embarking on a new adventure. The story Red Nails was an inspiration for this figure. It's really amazing how imposing it becomes when you get rid of those ridiculous hands and feet that the base figure has. Thanks for looking.](userimages/customs/22000/21589-1.jpg) Conan the Barbarian Conanby kaneda186This figure was made using parts from NECA Conan, McFarlane Prince of Persia, and Mattel TriKlops figs. I wanted to make a fig of Conan that looked l...0 comments | ![[Conan] Started this custom yesterday afternoon and just finished him up,I really like the way he came out, using a WWE deluxe aggression base figure and a NECA Conan, sculpted the boots and dry brushed several shades of skin tones, hope you like him.
Steve](userimages/customs/22000/21548-1.jpg) Conan Marvel Legendsby StevidStarted this custom yesterday afternoon and just finished him up,I really like the way he came out, using a WWE deluxe aggression base figure and a NE...16 comments |
![[War Paint Conan] This was originaly a WCW Sting figure. I stripped the paint off his face, painted on the black camoflauge, re-painted his hair, sculpted the wheel of pain necklace, and hand sewed the pants and sword sheath.](userimages/customs/22000/21514-1.jpg) War Paint Conan Conanby RosedaleThis was originaly a WCW Sting figure. I stripped the paint off his face, painted on the black camoflauge, re-painted his hair, sculpted the wheel of...2 comments | ![[Conan the Barbarian] Conan was made from the crotch/upper legs of a Viking Spawn, the upper body/upper arms of an Earth A.D. Slaine, and the head/lower arms/lower legs from a ML Thor. Tons of various other items were kit bashed onto the figure along with a full re-paint. His horse was made from a Thunderhoof box set, and was completely re-painted with over 20 different shades of paint, and has a refitted saddle with fur saddle blanket and pack.](userimages/customs/22000/21513-1.jpg) Conan the Barbarian Conanby RosedaleConan was made from the crotch/upper legs of a Viking Spawn, the upper body/upper arms of an Earth A.D. Slaine, and the head/lower arms/lower legs fro...2 comments |
![[Conan] John Buscema Conan version, thighs molded with epoxy, epoxy modeling hair, Loki boots, loincloth Kazar, modeled face cutter.
Conan version John Buscema, muslos modelados con epoxy, cabello modelado con epoxy, botas de Loki, taparabo de Kazar, la cara modelada con cutter.](userimages/customs/21000/20537-1.jpg) Conan Conanby SatanazJohn Buscema Conan version, thighs molded with epoxy, epoxy modeling hair, Loki boots, loincloth Kazar, modeled face cutter.
Conan version John Busce...3 comments | ![[Conan the Barbarian (the Movie: Legends Scale Fig] I have to say I absolutely love this film, and it is one where you can buy Arnie in his role. Did you know Oliver Stone co-wrote the screenplay?
Anyways, in honour of one of my favourite films, and the 'Govinator' in one of his greatest roles, I give you my Legends Scale, Arnold Conan.
Head: Neca Warpaint Movie Conan (Repainted in dry-brushed skin tones)
Torso, Arms, and Hands: Random TNA Wrestler fodder (With heavily resculpted arms and torso)
Hips and Legs (to calves): ML A.O.A. Sabretooth
Boots: Neca Warpaint Movie Conan
When I got to this guy I wanted him to be huge, but a lot of the part choices I wanted to make just didn't work out proportionally. So by happy accident, I had this torso leftover from, funnily enough, from my Arnold Terminator custom from a couple of months back. Karmic coincidence?
Anyways, the torso fit, but I was surprised to see how small the muscles were, and the abs were actually missing. I mean it was just flat plastic. So I built up the should](userimages/customs/20500/20191-1.jpg) Conan the Barbarian (the Movie: Legends Scale Fig Conanby pulpyfictionI have to say I absolutely love this film, and it is one where you can buy Arnie in his role. Did you know Oliver Stone co-wrote the screenplay?
Any...12 comments |
![[Conan] The coming of Conan, the first comic of Conan (1970), drawn by Barry W. Smith and script by Roy Thomas, for this custom Kazar use of hasbro figure, and hair of legendary comic book Conan, helmet, sandals, collar and wrist guards are molded with epoxy and painted with Testor and acrylics, I very pleased with the outcome of this figure, but need to improve your hair, most likely it is modeled with epoxy to give better results.
La llegada de Conan, el primer comic de Conan (1970), dibujado por Barry W. Smith y guion de Roy Thomas, para este custom utilice la figura de Kazar de hasbro, y el pelo del Conan legendary comic book, el casco, las sandalias, el collar y las muñequeras estan modeladas con epoxy y pintadas con Testor y acrilicos, estoy muy conforme con el resultado de esta figura, aunque falta mejorar el pelo, lo mas probable es que lo modele con epoxy para darle un mejor resultados .](userimages/customs/20500/20038-1.jpg) Conan Conanby SatanazThe coming of Conan, the first comic of Conan (1970), drawn by Barry W. Smith and script by Roy Thomas, for this custom Kazar use of hasbro figure, an...2 comments | ![[Conan the Warrior] A version of Conan with the comic book look & feel but using the movie base. I called it: CONAN THE WARRIOR
I used parts from many figures (Realm of the Claw, LOTR, McFarlane etc).
The shield was casted in resin and I used real dirt for the base floor.](userimages/customs/20000/19975-1.jpg) Conan the Warrior Conanby Leo CustomsA version of Conan with the comic book look & feel but using the movie base. I called it: CONAN THE WARRIOR
I used parts from many figures (Realm ...3 comments |
![[Conan] Conan made a wrestling figure, Mr Kennedy, modeling with epoxy and the face worked with cutter
Conan realizado con una figura de la lucha libre, Mr Kennedy, modelado con epoxy y la cara trabajada con cutter](userimages/customs/18500/18396-1.jpg) Conan Conanby SatanazConan made a wrestling figure, Mr Kennedy, modeling with epoxy and the face worked with cutter
Conan realizado con una figura de la lucha libre, Mr Ke...1 comments | ![[Speedo Conan] I know there've been a lot of Conan's based off this guy but my intent was to experiment with trying my own blend of skin tone (usually I just use a store-bought color) ... this time I went with part skin tone as a base, added red, buttermilk, and golden brown, to give him a bit of a tan. Also decided to remove his leg sidearm short sword and covered it with sculpted muscle.
Lastly, I never liked Conan in a skirt, and felt that fur was kinda restricting... once I removed the skirt I kinda liked it as-is. My wife asked "Why is Conan wearing Speedo's?" and hence "Speedo Conan" was born!
Oh yeah, forgot that I modified his sword. His scabbard is attached via a rubber band and I glued strips from his original straps onto it.
"Crush your enemies!"
"See them driven before you!"
"Hear the lamentation of de wimmen!"](userimages/customs/17000/16964-1.jpg) Speedo Conan Conanby vidmouseI know there've been a lot of Conan's based off this guy but my intent was to experiment with trying my own blend of skin tone (usually I just use a s...0 comments |
|