![[Gamora (Guardians of the Galaxy] Here is my take on Gamora as seen in the more recent Guardians of the Galaxy books. Specifically, I blended her look there with the one from The Thanos Imperative. I dremeled and sculpted the heck out of a DCUC Power Girl figure and gave her new hair, straps, boots, etc. etc. The straps, skulls, "chain", crown and holster are mostly done using a combination of apoxie sculpt, fix-it, and fodder.
I painted her using Citadel undercoats and then topcoat mixes of various Citadels coated, drybrushed, recoated, drybrushed, recoated, so-on for what seemed like a thousand hours until I had all the tones I wanted. Her eye makeup and the other finer details were done with a brush and also Gundam markers, both ultrafine.
Only the energy pistol is stock--every other piece of her gear was customized. I gave her a poseable hand and removable cape, which also features a slot for bladed weapons. Three blades are pictured here--her legendary shiv Godslayer is almost invisible, try](userimages/customs/37000/36950-1.jpg) Gamora (Guardians of the Galaxy Marvel Legendsby terryzomHere is my take on Gamora as seen in the more recent Guardians of the Galaxy books. Specifically, I blended her look there with the one from The Than...7 comments | ![[GL Guardian] hi everybody it been a while, heres my 1st custom of the year/along time.
im collecting the gl for my son and his corp is slowly growing. I was looking thru my fodder bin n had an idea.
Green Lantern Guardian, Guardian packs a hellova punch and is usually found in the frontlines ready to throw down w/any enemy - manhunter/sinestro corp member or anyone else.
recipe
head - dcu guardian (i think, cant remember his name - yellow head)
body - dcu gl sodom yat
construct hands - motu 200x
let me know wat u think, thanx](userimages/customs/37000/36735-1.jpg) GL Guardian DC Universeby king xornhi everybody it been a while, heres my 1st custom of the year/along time.
im collecting the gl for my son and his corp is slowly growing. I was looki...7 comments |
![[Guardian] This time I decided to do a guardian of alpha flight because here in mexico this figure is vry difficult to achieve.
I did it by using mu constrictor wich will only remove the wips used to sculpt the head of cap. marvel,the rest was only painting I hope you liked.](userimages/customs/35000/34547-1.jpg) Guardian Marvel Universeby escorpcustomsThis time I decided to do a guardian of alpha flight because here in mexico this figure is vry difficult to achieve.
I did it by using mu constrictor ...7 comments | ![[Red Guardian] Assembly was ML Cyclops, cut off the boots and added ML Cap legs a Star Man head, sanded, filled in peg holes and painted. I'm waiting on the shield to complete this one, but I couldn't wait to post him. Really enjoyed making this guy, I'm going to do a couple of different versions in the weeks to come. Comments welcome, thanks for looking.](userimages/customs/34500/34485-1.jpg) Red Guardian Marvelby G_RantulaAssembly was ML Cyclops, cut off the boots and added ML Cap legs a Star Man head, sanded, filled in peg holes and painted. I'm waiting on the shield t...13 comments |
![[Red Guardian] all i can say is that i hate Stars, hahaha. pretty easy figure to make, im sure u can all guess, lol. (1st ap cap? lol)](userimages/customs/34000/33790-1.jpg) Red Guardian | ![[Ultimate Guardian Zenki] this character is kinda big in our country when i was a kid. i just search some pics in Google and base my model using those pics. i used 3 figures to mix and match the body, limbs and the head. then i sculpt the rest of the accessories and the face. hope you guys like it.](userimages/customs/33000/32701-1.jpg) Ultimate Guardian Zenki Animeby boristhis character is kinda big in our country when i was a kid. i just search some pics in Google and base my model using those pics. i used 3 figures to...3 comments |
![[Lara Croft Guardians of the Light (V.2)] Tomb Raider LARA CROFT with the look of the game Guardians of the Light.
This is the second version I have with the same look. As in the earlier, used as the base of TRU Lara Neca, modifying the details of epoxy and repainting the whole figure with vinylic paints.](userimages/customs/33000/32583-1.jpg) Lara Croft Guardians of the Light (V.2) Tomb Raiderby Leo CustomsTomb Raider LARA CROFT with the look of the game Guardians of the Light.
This is the second version I have with the same look. As in the earlier, used...2 comments | ![[Ganthet Blue Lantern Guardian] The base is a guardian of DC Direct and only modified the hair. Painted with vinylic paints. The symbol I did in corel, print and pasted.](userimages/customs/32500/32096-1.jpg) Ganthet Blue Lantern Guardian DC Directby Leo CustomsThe base is a guardian of DC Direct and only modified the hair. Painted with vinylic paints. The symbol I did in corel, print and pasted....3 comments |
![[Rainbow Cavalery: the Lanterns Guardian] Custom:
Hal Jordan: Movie master hal jordan
Sinestro: DCD Sinestro and MM sinestro head
Star Sapphire and Indigo-1: X-men Jean grey
Larfleeze: marvel vs capcom dhalsim
Saint walker: silver surfer movie
Swamp thing: vintage swamp thing with lots of plastic plant
Original: Nekron, Manhunter, and atrocitus
Enjoy guys..](userimages/customs/31500/31450-1.jpg) Rainbow Cavalery: the Lanterns Guardian DC Universeby psychokillah1777Custom:
Hal Jordan: Movie master hal jordan
Sinestro: DCD Sinestro and MM sinestro head
Star Sapphire and Indigo-1: X-men Jean grey
Larfleeze: marvel ...7 comments | ![[Ursak the Guardian] Greetings from the crypt ! Hope all is unwell?
Just another one for my boneyard , I present Uncle Ursak the Guardian from
Skeleton Warriors , really he was the man at arms of the show ,
a few problems with this one but nothing major .
I like the way he looks and his helmet is removable and he fits in well
with the rest of my kinda motu guys , hope you all like him .
Comments always welcome
Many thanks and bodybags of hearts
Zombieforhire](userimages/customs/31000/30733-1.jpg) Ursak the Guardian |
![[Red Guardian] Made with a StarMan head, Todd Rice body and random DCU hands. Exploring different characters that could be oriented with the Captain America universe. "From Russia with love." Modern Red Guardian.](userimages/customs/29500/29419-1.jpg) Red Guardian Marvel Legendsby G_RantulaMade with a StarMan head, Todd Rice body and random DCU hands. Exploring different characters that could be oriented with the Captain America universe...2 comments | ![[Guardian Predator] Ok, I'm just re-listing this one because I think he deserves his own post. I've used him on the "you've been slimed" contest where he's holding a dismembered alien covered in green slime/blood.
Here goes the description for this guardian predator:
Started out as an open mouth ser.1 classic predator from neca, I sculpted the removable gort mask completely from epoxy.
A re-breather mask was also made from scratch (epoxy and some electrical wire for the hose)
The open mouth/mandible can still be re-attached on the figure.
Armor pieces were sculpted from epoxy especially the left and right hip/thigh armors, leg armor including the net shooter on the left leg.
The belt and the front and back skirts were sculpted and attached with a thick string so it'd still be movable and won't hampre the leg articulation.
Left arm armor is also sculpted, the same with the bone sash and necklace (made from epoxy and strings)
Human skull was from cheap skeleton ornaments that were re-sculpted so](userimages/customs/29000/28606-1.jpg) Guardian Predator Predatorby getsaOk, I'm just re-listing this one because I think he deserves his own post. I've used him on the "you've been slimed" contest where he's hold...3 comments |
![[DC Universe Guardian Young Justice] This custom was inspired by the Guardian on Young Justice.. not 100% accurate but definitely around there.. hope you guys like it..](userimages/customs/28500/28409-1.jpg) DC Universe Guardian Young Justice DC Universeby wyLunThis custom was inspired by the Guardian on Young Justice.. not 100% accurate but definitely around there.. hope you guys like it.....6 comments | ![[Lara Croft Guardians of the Light] Several modifications with epoxy and paint, to stay with the new look of the heroine of the game.](userimages/customs/28500/28059-1.jpg) Lara Croft Guardians of the Light |
![[Guardian Predator VS Grid Alien] The hunter becomes the hunted.
The alien warrior succumbs to a more skilled creature... The guardian predator.
-Recipe
The alien blood / slime is just some green hair gel. I have a green slime that I bought months ago, stored it in my room, and now it's just some murky green watery liquid. Hence, I just settled for the green hair gel. It's a little light in color and translucent, but it still works as an alien slime/blood. I just smeared it on the alien figure and on the retractable blade of the predator.
The alien figure is a dismantled mcfarlane grid alien figure which I got for free from another fellow customizer.
The predator figure started out as a classic open mouth predator, repainted the whole body and head, changed his body armor, and re-sculpted all the armor pieces. He was also given a removable re-breather mask so he can swap it to the regular bare open mouth.
A lot of work went into this predator figure, he has tons of accessories too. I'll post him on an individual](userimages/customs/28000/27835-1.jpg) Guardian Predator VS Grid Alien Alien vs Predatorby getsaThe hunter becomes the hunted.
The alien warrior succumbs to a more skilled creature... The guardian predator.
-Recipe
The alien blood / slime is j...1 comments | ![[Red Guardian] Here is the current version of the Russian hero Red Guardian. Not to be outdone by Bucky-Cap getting a new costume, he followed suit and added a new shield to boot! lol Simple custom, used Ronin for the base, made some modifications and painted added the kree soldier head and here he is!](userimages/customs/27000/26693-1.jpg) Red Guardian Marvel Legendsby Mini-meRulesHere is the current version of the Russian hero Red Guardian. Not to be outdone by Bucky-Cap getting a new costume, he followed suit and added a new s...1 comments |
![[Red Guardian] Here's a custom Red Guardian I made awhile ago, I decided to make him after seeing him show up in the recent Hulk series ( I beleive it's issue 2 ) I personaly don't like pirate boots so I thought keeping it simple would give him somewhat of a modern look, he is a repainted Commander Steel with various shades of red and a little mucsle detail, his sheild is a Taskmaster sheild, sculpted over the "T" and hand painted the star as well as the star on the chest....any feedback would be nice
Mr.T](userimages/customs/26500/26069-1.jpg) Red Guardian Marvel Legendsby 3bcustomsHere's a custom Red Guardian I made awhile ago, I decided to make him after seeing him show up in the recent Hulk series ( I beleive it's issue 2 ) I ...2 comments | ![[Red Guardian] I Used a DCU Mr Miracle Body and commander steel head, a quick red and withe repaint, the star was cut off from a KIZZ figure, off cours a Capt America shield and Voila](userimages/customs/26000/25649-1.jpg) Red Guardian Marvel Legendsby Ares3177I Used a DCU Mr Miracle Body and commander steel head, a quick red and withe repaint, the star was cut off from a KIZZ figure, off cours a Capt Americ...1 comments |
![[Guardian] This was the guardian toy fare figure...he was repainted the dark red he was drawn in the 90's xmen cartoon...the 2 holes in his back were filled in and painted over...his wrist gauntlets were carved into wrists...as you can see the paint apps are sharp and the maple leaf is in the exact spot on each side of body...one of my first customs.](userimages/customs/24500/24339-1.jpg) Guardian | ![[Skeletal Tomb Guardian] Four-armed, undead warriors that can potentially be encountered in the pen-and-paper roleplaying game Dungeons & Dragons. Typically, an evil human or demihuman wizard or priest will animate these obscenities to serve them, but various creatures also associate with skeletons (usually other undead species, such as zombies, ghouls, liches, etc., but living monstrosities have been known to employ them as minions too). On rare occasions, skeletons can also rise "naturally", animated by energies from the Negative Material plane seeping through into the Prime Material plane--"rogue" skeletons born from this phenomena recognize no master and attack any living thing unlucky enough to cross their path.
Skeletal Tomb Guardians, as the moniker implies, are usually created to watch over the final resting places of important individuals and the fabulous treasures that are often buried with them. The four scimitars the creature wields competently, if a bit stiffly, allow it](userimages/customs/23500/23290-1.jpg) Skeletal Tomb Guardian Dungeons and Dragonsby PatrawFour-armed, undead warriors that can potentially be encountered in the pen-and-paper roleplaying game Dungeons & Dragons. Typically, an evil human...5 comments |
![[Guardians of the Galaxy's, Starhawk!] This was a fun one. So his head gear and star on his belt are sculptee from Aves. Wings are cut foam sheets with perojectile missile prongs cut and glued onto the wing tips for removable wings. Then I took a DC U Brainiac head and stripped it down and sanded off the top of his head. Primered, painted and done! Hope ya like.](userimages/customs/23500/23242-1.jpg) Guardians of the Galaxy's, Starhawk! Marvel Legendsby Comicustoms!This was a fun one. So his head gear and star on his belt are sculptee from Aves. Wings are cut foam sheets with perojectile missile prongs cut and gl...1 comments | ![[The Guardian] Recip
head: I casted a wonder man head and schulpted the hair and glasses
body: quicksilver with minor schulpt
feat: nick fury
arms: two pack nick fury
hands: I think there from Punisher
coet: Nick fur coet with fake leather fore the parts over the arms so there very flexible and lots of schulpt fore the back part and coller.
I painted this guy like he was collered in the cartoon with bright blue hair and a blue coet. I hated the figure playmatestoys made of this guy fore some reason they changed his collers. It toolk me a while to get his skin tone right but I eventually got it. I've been waiting a while to do this guy. He was one of my favorite carrecters from the new cartoon and I wanted to get him right. I think he came out pretty well despite a cuple mistakes allong the way that toolk some time to fix.](userimages/customs/22500/22414-1.jpg) The Guardian |
![[MANTIS (Guardians of the Galaxy)] For Mantis I used Psylocke's body plus a Supergirl head. The details on the costume were made with epoxy. The belt is a piece of Mr. Sinister's cape and the belt pockets are from a Marvel Legends I can't remember which. The lower part of the shirt and the skirt are made of blister plastic. The antennae are sewing pins. It was painted with matte vinylic paint.](userimages/customs/22500/22395-1.jpg) MANTIS (Guardians of the Galaxy) Marvel Legendsby Leo CustomsFor Mantis I used Psylocke's body plus a Supergirl head. The details on the costume were made with epoxy. The belt is a piece of Mr. Sinister's cape a...2 comments | ![[CAPTAIN UNIVERSE (Guardians of the Galaxy)] The used base was Xorn with a Face-Off Daredevil head (I added a pair of ears from some other Marvel Legends) and Wolverine 2-Pack Arms. I re-sculpted the whole chest, neck and part of the legs with epoxy. The belt is a piece of Mr. Sinister's cape and the belt pockets are from a Marvel Legends I can't remember which (lol). The lower part of the shirt (below the belt) is made of blister plastic and epoxy. The painting is mostly vinylic but the silver one, which is spray paint.](userimages/customs/22500/22394-1.jpg) CAPTAIN UNIVERSE (Guardians of the Galaxy) Marvel Legendsby Leo CustomsThe used base was Xorn with a Face-Off Daredevil head (I added a pair of ears from some other Marvel Legends) and Wolverine 2-Pack Arms. I re-sculpted...3 comments |
![[BUG (Modern Guardians of the Galaxy)] I used ML Nightcrawler body and a casted Wonderman head. Gloves, mask e the detailson the clothing were made with epoxy and the shirt portion below the belt was made with blister plastic and epoxy. The belt waqs done with a piece of rubber and the belt pockets came from some Marvel Legends which I cannot recall lol. The antenna are made out of wire and a little drop of puff glue on the tips. The harpoon is a piece of wire with the tip of a Revell plane missil.
The painting was done using vinylic paint.](userimages/customs/22000/21742-1.jpg) BUG (Modern Guardians of the Galaxy) Marvel Legendsby Leo CustomsI used ML Nightcrawler body and a casted Wonderman head. Gloves, mask e the detailson the clothing were made with epoxy and the shirt portion below th...0 comments | ![[Red Guardian] Aqui está mais um dos meus customs! Eu não coleciono mais actions da DC Comics e tinha um Red Tornado sobrando... daí pesquisei personagens que quase ninguém tem e cheguei no Red Guardian! (Daredevil é uma customização muito comum dele...). Aproveitem e dêem suas opiniões!
.
.
_________________________________________________________________________
.
.
Here one more Custom! I don't collect actions of DC Comics´s actions anymore and haved Red Tornado to spare ... then researched red characters and almost no one has maked the Red Guardian! (Daredevil is a very common customization of it ...). Enjoy and give your opinions!](userimages/customs/22000/21528-1.jpg) Red Guardian |
![[Classic Guardians of Thje Galaxy (Group Shot)] A picture of the whole classic Guardians of the Galaxy team.
See also the individual figures, which describe how they were made.](userimages/customs/21500/21449-1.jpg) Classic Guardians of Thje Galaxy (Group Shot) | ![[Guardian] Not to original here, just a Supes base with a retooled Batman head. I was never a fan of the one we got in Hasbro ML cause he was way to skinny, so I wanted to make one to go with the set that was nice and buff. enjoy and Gob Bless...](userimages/customs/21500/21216-1.jpg) Guardian Alpha Flightby da manNot to original here, just a Supes base with a retooled Batman head. I was never a fan of the one we got in Hasbro ML cause he was way to skinny, so ...3 comments |
![[CHARLIE 27 (Classic Guardians of the Galaxy)] The base figure is LCBH Clawnface. The head is a casted Kingpin Face-Off one and the legs came from 1st appearance Hulk.
I modified a lot of it, mostly feet and legs, with epoxy. The "C" on the belt buckle was made with blister plastic. The painting was done with matte vinylic paint.](userimages/customs/21500/21159-1.jpg) CHARLIE 27 (Classic Guardians of the Galaxy) Marvel Legendsby Leo CustomsThe base figure is LCBH Clawnface. The head is a casted Kingpin Face-Off one and the legs came from 1st appearance Hulk.
I modified a lot of it, mostl...2 comments | ![[ALETA (Guardians of the Galaxy)] For making this one I used Hasbro Elektra body plus a Ladydeamon head. The boots came from Donna Troy and the cape from Super Girl. The disks under her feet were done with blister packaging plastic.
The symbol was printed and then applied to the figure.
I painted it with black vinylic paint and gold spray paint. On the hair I used yellow vinylic paint with some superimposed orange. I also used skin tone for the face.](userimages/customs/21000/20887-1.jpg) ALETA (Guardians of the Galaxy) Marvel Legendsby Leo CustomsFor making this one I used Hasbro Elektra body plus a Ladydeamon head. The boots came from Donna Troy and the cape from Super Girl. The disks under he...0 comments |
|