![[Grayfox] Third figure for today is Grayfox. The ninja dude from Metal Gear! He was made from the following parts:
Body - LCBH Star
Fist - Hand ninja
Trigger hand - Fury
Feet - Yellowjaket
Head - original LC sculpt
This one had a bit more work due to the armour plates on him. The head took a while to get looking "right" too. His paintjob is a more shiny smooth finish instead of our usual matte.
Hope you like him guys! God bless. -LC](userimages/customs/44500/44374-1.jpg) Grayfox | ![[Red Lantern Kyle Rayner] This was a pretty fun custom. It is based on the appearance of Kyle Rayner in Green Lantern New Guardians issue #13. I think it's cool how Kyle is attempting to master each color in the emotional spectrum and I'm very interested to see where the story line will take us.
The base for this figure is a DC classics black lantern Hal Jordan. I cut off the hair and then molded the mask/helmet onto him. Gave the body a few coats of paint to match the comic appearance. The belt and...skirt, i guess? is from an indigo atom figure. I just sliced those off of him, gave them a repaint, and added them to this figure. The pieces near his shoulders are also from the indigo atom figure. The symbol on the chest is from the Dc Classics Nite-Lik figure.](userimages/customs/44500/44158-1.jpg) Red Lantern Kyle Rayner Green Lanternby FutaenokiwamiThis was a pretty fun custom. It is based on the appearance of Kyle Rayner in Green Lantern New Guardians issue #13. I think it's cool how Kyle is att...4 comments |
![[Gray Zombie Hulk] just in time! fellow realm user Satanaz (who is a Chilean compatriot) is running a contest about making Marvel or DC zombies for Halloween, there's even prizes! I'm really happy about the initiative because i think is one of the best ways to start making this hobby more popular here in Chile, so I'm participating too!
i had this hulk lying around for ages (since he was released probably) and never really liked him so much, mostly because of those green zones on the skin and partly for the head sculpt, but when i was deciding which zombie i would make i saw one of the covers for the marvel zombies reprints and thought this would be the perfect choice.
i would like to point out that even when he has some blood my intention here was to make him look rotten and not very fresh, since usually zombie customs are just figures with red blood all over the place and i wanted to make something more complex.
so, what i did here was:
Head: kept the head head as a base, dremeled everything except](userimages/customs/44000/43945-1.jpg) Gray Zombie Hulk Marvel Legendsby Mr.?just in time! fellow realm user Satanaz (who is a Chilean compatriot) is running a contest about making Marvel or DC zombies for Halloween, there's ev...6 comments | ![[Starcraft Ii Jim Raynor] Jim Raynor
StarCraft fan since its inception in the year 89, now try to get close to reality and if there really is such a warrior as a character, Work more accurate colors, more destruction and spent on the suit itself, hope you like](userimages/customs/44000/43932-1.jpg) Starcraft Ii Jim Raynor Starcraftby chief34Jim Raynor
StarCraft fan since its inception in the year 89, now try to get close to reality and if there really is such a warrior as a character, Wo...3 comments |
![[Gray Hulk] sanded the head,a little sculpt on the hair,spary with dull black and dry brush with gray,hope you guys like it](userimages/customs/44000/43719-1.jpg) Gray Hulk | ![[Snake Armor He-Man (Power of Grayskull Contest Pri] First of all I want to thank Shinobitron. My very first contest I entered here on the Realm he offered a prize for the Rock'em Sock'em Robot contest. I ended up winning and I received an awesome custom SteelJaw transformer. That experience left an indelible mark on me. I vowed to myself that if my skills ever got to the point that my customs were desirable (I don't know if I got there yet but I figure what the hey) I wanted to follow in his footsteps and give someone else the great experience I got. So in essence this is me paying it forward.
So with no further adieu, it is my pleasure to present Snake Armor He-man!!!!
I wanted this prize to be desirable, so I cheated and used a figure that is pretty rare (well it is here in the United States). That way I knew there was a good chance that the winner will be happy with the prize despite my skill limitation.
The first thing I did was give He-man some new legs so he can stand up straight. I used DCU Cyborg right leg and a DCU buck's l](userimages/customs/43500/43237-1.jpg) Snake Armor He-Man (Power of Grayskull Contest Pri |
![[Power of Grayskull Orko] The Trollan mostly used for comic relief in the original Masters of the Universe deserves a chance to kick some serious butt.
I always wondered what would happen if He-Man pointed his sword to another being in Eternia besides Cringer. What would happen if he gave the Power of Grayskull to Orko, instead?
This was one fun custom to create as it allowed me to go wild with Orko's design, post-Power of Grayskull.
Since we never got to see his face, I also took some artistic freedom and created one using a Nite-lik head...one of the scariest alien heads ever! I figured Trollans only show their faces to one another because maybe they find themselves to be too horrific to other races. I did try to give him a more kind/friendly twist to his exposed head.
It's fun to be able to display him 3 different ways:
-Head w/ hat + scarf
-Exposed head + cape
-Head w/ hat + cape
~Body - The Faceless One w/ Man-E-Faces lower legs.
~Cape - Count Marzo's cape
~Scarf - Modified scarf from Spawn Issue 131](userimages/customs/43500/43177-1.jpg) Power of Grayskull Orko | ![[Richard Grayson Batman Reborn] I have been wanting to do a Richard Grayson Batman Reborn figure since I first saw that cover of Batman and Robin #1 by Frank Quitely. This was a job for Tyler, sup dude! I searched for a head sculpt that resembled Richard Grayson, ie, a younger Batman, he’s also a bit thinner. I love how he turned out with the muted colors offset by the gold belt.
He was a DC Direct Batman, Sinestro Corps Batman, and a First Appearance Det. Batman, DD batons, and sculpted boots.
Enjoy!
AC](userimages/customs/43500/43056-1.jpg) Richard Grayson Batman Reborn D.C. Universeby ACCustomFiguresI have been wanting to do a Richard Grayson Batman Reborn figure since I first saw that cover of Batman and Robin #1 by Frank Quitely. This was a job ...5 comments |
![[Flashpoint Grayson] This was a requested figure. Flashpoint was DC's big event last year. Their lead-in to the New 52. I like alternate reality stories, so I checked it out. I really enjoyed Batman. Thomas Wayne as the Bat, Martha as Joker, and their son was dead. I couldn't help but wonder about Nightwing in all this. He was featured in Deadman and the Flying Graysons. Well, when this request came through I finally picked up the comics and checked out his story. His parents still die, but this time by an attack from the Amazons. A later explosion kills Boston Brand, who ends up becoming the Deadman we all know and love. What I didn't expect, though, was that in the end Grayson put on the helmet and became the new Dr Fate. Interesting turn of events really. But it was requested that I make this uniform, so I gave it a shot.](userimages/customs/43000/42969-1.jpg) Flashpoint Grayson DC Infinite Heroesby DravenheartThis was a requested figure. Flashpoint was DC's big event last year. Their lead-in to the New 52. I like alternate reality stories, so I checked it o...3 comments | ![[Beta Ray Binks] took a jar jar binks and thought he would make an awesome cosplay beta ray bill so we get beta ray binks. clay, jar jar, craft foam, random cape.
enjoy
FT](userimages/customs/43000/42704-1.jpg) Beta Ray Binks Star Warsby future_trunkstook a jar jar binks and thought he would make an awesome cosplay beta ray bill so we get beta ray binks. clay, jar jar, craft foam, random cape.
enj...12 comments |
![[Castle Grayskullman (Vintage Style)] My first motu vintage custom! (I have done she-ra vintage, but never motu) Castle Grayskullman here was a gift to my friend Daniel Benedict as a way of thanking him for creating such an awesome character. (Daniel won the official Mattel create a character contest fro the 30th anniversary line) This figure was sculpted from scratch. Certain areas of the stones were sculpted one by one. And no, I don't plan on getting into customizing vintage any time soon....or maybe I will?](userimages/customs/42500/42290-1.jpg) Castle Grayskullman (Vintage Style) | ![[Richard Grayson Batman] ive always wanted a Grayson batman for my collection. i used first appearance batman legacy as the base and removed the ears and sculpted them to look straighter. also sculpted the belt and gloves and used felt for the cape them painted and sprayed with a gloss sealant.](userimages/customs/42500/42012-1.jpg) Richard Grayson Batman Batmanby nightwing27ive always wanted a Grayson batman for my collection. i used first appearance batman legacy as the base and removed the ears and sculpted them to look...1 comments |
![[MOTUC CUSTOM FILMATION TEELA W/ Freeze RAY & ] Here we Have a custom Teela done for me by Hunter Knight Customs , I then repainted the entire figure , especially the face. Detailed the costume & added her arm Pop out Freeze ray to have my own spin on it. Thanks guys and Hunter Knight Customs for my Cartoon Accurate Masters of the universe Classics figure](userimages/customs/42000/41823-1.jpg) MOTUC CUSTOM FILMATION TEELA W/ Freeze RAY & | ![[X-Ray] and the u-foes continue.....
hes made from a ml box set mr fantastic body with a smc hobgoblin head. resculpted face and total repaint.
special thanks to fast freddie & his u-foes team for the inspiration.](userimages/customs/42000/41525-1.jpg) X-Ray |
![[Richard John Grayson (D!Ck) | Flying Graysons] well i saw this before they were heroes contest and ive never before entered a contest on here so i thaght well i had ideas of either *****spoilers***** tom hardy's bane before he was bane aka when he saved joey kings talia or do a ra's al ghul about 400-600 years ago when he was with a nomad tribe and left them for science and fell inlove aka before he was evil...
but i did this.
base is a kid flash with sculpted robin lower legs and a robin head with parts liek chin etc taken form peter parker and rest is sculpt
for paintjob i thaght well i prefer the new jim lee and frank millers fully green with bit of yello as a pose to the robin costume so i went with fully green and his 84 first apearace nightwing effect on chest and on shoes.....
unknown to grayson his parents will so die at the hands of tony zucco and in a a year or so time he will become batmans sidekick robin (robin named after his dads favourite film)..](userimages/customs/41500/41399-1.jpg) Richard John Grayson (D!Ck) | Flying Graysons Batmanby Chester001well i saw this before they were heroes contest and ive never before entered a contest on here so i thaght well i had ideas of either *****spoilers***...0 comments | ![["Pray for Death" Sho Kosugi] Scratch-built helmet, modded sword, straps and buckles added to armour.](userimages/customs/41000/40770-1.jpg) "Pray for Death" Sho Kosugi |
![[Saturday Night Slam Masters Scorpion and El Stingr] CAPCOM'S "Saturday Night Slam Masters" is one of my favorite arcade wrestling titles, and on the SNES as well. My two favorite characters from this game are El Stingray and game boss, The Scorpion. I remember playing this with a friend, and having some of the most epic battles with these two. I've always wanted to do some wrestling figures, but since Mattel and Jakks do a great job of making classic and current figures for WWE and TNA, I knew I didn't want to make any real-life characters. My attention turned to videogame characters, and eventually I decided on Saturday Night Slam Masters.
El Stingray - First off, I know he's supposed to be short, but I could not find a wrestling figure I was satisfied with (no, Rey Misterio didn't work) , so I went with the body I had. He's comprised of a body of Super Nova from the "Lucha Libra, USA" line and a modded head of Lizmark, Jr. A note of interest; The El Stingray character, visually is based on real life wrest](userimages/customs/40500/40499-1.jpg) Saturday Night Slam Masters Scorpion and El Stingr Capcomby GDXCAPCOM'S "Saturday Night Slam Masters" is one of my favorite arcade wrestling titles, and on the SNES as well. My two favorite characters f...8 comments | ![[Snake Armor King Grayskull V2 (Cartoon Accurate)] Hello guys! After I received some suggestions on how to improve King Grayskull’s Snake armor, I decided to do a version 2 as featured in the episode “The Power of Grayskull”. The differences on this figure are mostly based in the naked shoulders which now sport straps and no armor in either leg or arm. It’s basically the “Mark I” of snake armors. Each armor panel was hand painted individually paying a ton of attention to detail, this time in a cleaner look instead of the usual “combat worn” one I regularly do on my pieces. The figure was then repackaged as usual. Thanks for checking it out!](userimages/customs/40500/40471-1.jpg) Snake Armor King Grayskull V2 (Cartoon Accurate) |
![[All Emotions Spectrum Power Corrupted Kyle Rayner] upper body: TJ GL Kyle Rayner
Lower body: Spiderman Toybiz](userimages/customs/40500/40122-1.jpg) All Emotions Spectrum Power Corrupted Kyle Rayner | ![[Beta Ray Bill] As you may know I'm doing a whole series of Avengers movie figures, characters you saw and didn't see. Here's Beta Ray Bill as I figure he may look in say, Avengers 2. He was made from a movie Thor, ML Beta Ray Bill head with various fodder armor/helmet sections added (probably LotR), Dr Doom feet, DCU Skallox hands, and a 3 3/4" Avengers Thunderstrike weapon fashioned into Stormbreaker. Some people love the character, some poke fun at his horse-ish looks, but I'm really liking how this figure turned out. Beta Ray Bill is ready to take on the universe, movie-style!](userimages/customs/40500/40081-1.jpg) Beta Ray Bill Avengersby Jin SaotomeAs you may know I'm doing a whole series of Avengers movie figures, characters you saw and didn't see. Here's Beta Ray Bill as I figure he may look in...13 comments |
![[Stingray] Here is Stingray, a character from the 80s series of Galaxy Rangers. Frankly, I'am not sure if I saw it when I was a kid, or if I confuse it with Bravestarr. Sometime ago I saw the episode 1 and more or less know what is the series. Recently I made this figure for a friend. He is Stingray, a figure that didn't have a toy, I suppose much like Shadow Weaver in MOTU. He has powers like Cyclops, when he removes his glasses he launches a optic ray.
As I've seen, I think I'am the first to post a custom of this collection in Figurealm, I have introduced in Galaxy Quest which sounds similar.
Base figure Deluxe Aggression](userimages/customs/40000/39861-1.jpg) Stingray Galaxy Rangersby argenta-2008Here is Stingray, a character from the 80s series of Galaxy Rangers. Frankly, I'am not sure if I saw it when I was a kid, or if I confuse it with Brav...8 comments | ![[Marvel Select Thor Movie Beta Ray Bill] I have always thought Beta Ray Bill was a cool looking character, and I saw a few customs on here and got inspired to do my own version of him. I got some inspiration form the izzyblack custom and just ran with it. I had a loose Marvel select Thor movie figure, with a broken foot, and a couple of dcuc Skallox heads. I did a gold dry brush on his arms, with a black wash to bring out the detail in the armor. I painted the red parts of the figure blue since Bills original colors were blue and gold. I then added gold bare metal foil to the disks, the center of his chest, and to the knee pad area. This really, really stands out and looks great! I painted some of the armor pieces, and the belt gold. I had a DCD Armory Aquaman figure and took the hands and shoulder pads from him. These were great because they were didn't need to be painted gold, and the hands were armored. I was going to sculpt a custom helmet for him, then I got to looking at the Aquaman helmet.....I cut off the horns from](userimages/customs/40000/39702-1.jpg) Marvel Select Thor Movie Beta Ray Bill Marvel Selectby category5customsI have always thought Beta Ray Bill was a cool looking character, and I saw a few customs on here and got inspired to do my own version of him. I got ...9 comments |
![[Stingray] Here is another Avenger that caught my eye back when i was collecting Avengers volume 1 comics. I never really knew much about him, i just like the look of his costume.
Head - MU Black Spider Man, sanded away eyes
Body - MU Human Torch
Wings - Cloth
Thanks for looking and comments are welcome.](userimages/customs/40000/39657-1.jpg) Stingray Marvel Universeby steve2477Here is another Avenger that caught my eye back when i was collecting Avengers volume 1 comics. I never really knew much about him, i just like the lo...1 comments | ![[Beta Ray Bill] repainted to look more modern and replaced cape with a dc direct circe cape](userimages/customs/40000/39574-1.jpg) Beta Ray Bill |
![[Beta Ray Bill] Hello again, this is my next custom Beta Ray Bill. I've never really known much about the character, but after watching the latest episode of the avengers cartoon, i decided that i kinda liked the him. after some time going through my odd's and sod's box, i decided that iron man could make a good base figure for Beta Ray Bill. So i set about making him, i know that he is an interpretation of Thor, but i thought that making them have similar costumes didnt really do Bill much justice, so i decided to make him in my own view, i also like the Beta Ray Bill in the planet Hulk movie, with the ripped cape so i decided to do that to mine. Most of this figure is iron man and miliput, with the exception of the lower arms and the lower legs, which came from the same Beast figure i used when i made Thor. The rest was sculpted with Miliput. Storm Breaker is also made from scratch.](userimages/customs/39500/39440-1.jpg) Beta Ray Bill Marvel Legendsby UNR3AL'S VAULTHello again, this is my next custom Beta Ray Bill. I've never really known much about the character, but after watching the latest episode of the aven...3 comments | ![[All Lantern Kyle Rayner] This figure is based on Kyle Rayner from the DC New 52 New Guardians Comic. In one of the issues, Kyle ends up wearing a ring from each of the 7 colored lantern corps. He transforms into what you see here. I thought he looked really cool so decided to make him in action figure form.
The base figure is a DC Classics Kyle Rayner figure. Painted up to match his comic appearance. I sculpted his mask, upper chest armor, and the collar around his neck. I also sculpted on his rings and tried to add a little detail to each ring. His belt is made out of a rubber band, painted and super glued on. I wanted to get the perfect detail for each of the corps symbols, so I printed them out on some address labels I had and stuck them on.
I'm very happy with the way he turned out. I hope all green lantern fans enjoy!](userimages/customs/39500/39204-1.jpg) All Lantern Kyle Rayner Green Lanternby FutaenokiwamiThis figure is based on Kyle Rayner from the DC New 52 New Guardians Comic. In one of the issues, Kyle ends up wearing a ring from each of the 7 color...6 comments |
![[Beta Ray Bill] Beta Ray Bill. The first and best of the Thor clones, created by the master, Walt Simonson. I’m generally against alt versions of heroes because it waters down the original but BRB is the exception because his intro and back story are handled so well. If I were the king of comics, I’d create a character who traveled throughout the universe/alt realities/timelines to reap all the “false” hammers and their owners, leaving only Bill and Thor (I’m looking at you Thunderstrike, Dargo, and Thor Girl).
Bill is a ML Piledriver with head, belt emblem and Storm Breaker (his hammer) from the old Legends BRB. The helmet wings are from a HML King Thor, chest discs from MS modern Thor and trimmed cape from a Elder Predator figure. Everything else is sculpted or rendered from craft foam coated with polyurethane.](userimages/customs/39500/39201-1.jpg) Beta Ray Bill | ![[Castle Gray Skull] I was not a big fan of MOTU back in the 80's. Even as a kid I hated when toy makers made toys that were out of scale. Any way last summer I picked up a vintage Castle Grayskull for my toy store. When I brought it into the house my 5 year old took ownership of it. I began to ponder the issues I had with MOTU as a kid and decided to make things right in the universe (well Eternia any way).
I started by getting 2 cardboard barrels and wrapped them with insulation foam. (i used hot glue and staples to attach the foam to the barrels. Once they were covered with the foam I used a soldering iron to etch the shape of the stones. cut out the window and added the casteling on the top of the towers.
Next step was crafting the big skull. I used more insulation foam for this. I cut out the base shape and then cup out layers and stacked them to give it the 3D shape. I then used painters caulk to blend in the the layers. Being that it was supposed to look like old stone work I did not try to make](userimages/customs/39500/39151-1.jpg) Castle Gray Skull |
![[The Ray] The Ray is one of my Favorite DC characters. The original Ray had great powers, but looked like he should have been called "Banana-Man"! The son is much more to my liking, & his most resent suit is his best...so that's what I chose.
First I took the Nightwing figure & yanked his head off. Then I replaced it with a JSA Starman masked head, cut out & attached a cardboard fin. Pleather for the high collar,...ready for painting.
I prefer his powered up form, with the all black look. Any thoughts?](userimages/customs/39000/38539-1.jpg) The Ray D.C. Universeby CapSoldierThe Ray is one of my Favorite DC characters. The original Ray had great powers, but looked like he should have been called "Banana-Man"! The...2 comments | ![[Invincible - Mark Grayson] I used a Captain Marvel body with the head of Gambit and some sculpt. Also instead of sanding down Marvel's forearms I just used Quicksilver's. Paint rub was a major pain for me and my blue isn't exactly the correct color but I still love the way he turned out. I'm proud. Thanks goes out to geki69er as I drew inspiration from his Invincible custom. P.S. Sorry for the sub-par pics my camera is being retarded.](userimages/customs/38500/38442-1.jpg) Invincible - Mark Grayson |
|