![[Sandman] lcbh clown face base, lcbh marv head, ungloved goon hands, ground off clownface detail and re-sculpted, smoothed out marvs face, trimmed bridge of nose and re-sculpted hair, texture sculpted on hands and forearms then painted in textured citadel paints. mace hand made from thunderball's weapon on end of fodder stick, hammer made from thor's hammer on top of fodder stick, all re-sculpted and textured.](userimages/customs/39000/38693-1.jpg) Sandman | ![[Sandman II] This Sandman is the Sandy Hawkins version. He was the original JSA Sandman's sidekick Sandy.
Before the Alex Ross update with the trench coat and fedora hat he wore this costume in the JSA.
Base figure is a repaint of the Black Lantern Hal Jordan
Goggles came from dc universe Starman's head
Gas Mask is from a GIJoe figure
Straps from Movie Masters B. Wayne
Belt from an Xmen figure,buffed out the X symbol
Leg and arm bands are from a ML Mr. Sinister cape
Gun is a ML Dr.Doom gun modified.
Hope you like.
Happy Good Friday and Happy Easter everyone.](userimages/customs/38500/38154-1.jpg) Sandman II DC Universeby 3mountainsThis Sandman is the Sandy Hawkins version. He was the original JSA Sandman's sidekick Sandy.
Before the Alex Ross update with the trench coat and fed...2 comments |
![[Sandman] Sanded the head and added 2 part epoxy for hair. Glued sand to the arm to create texture. Total repaint. I also hollowed out an MU hulk hand to create the over-sized attachable sand-hand.](userimages/customs/38000/37905-1.jpg) Sandman | ![[Sandman] I took a break from customizing action figure sometime ago. This Sandman was done more than a year ago, I only had time to take a photo last night.
I'm starting to do a little bit of customizing, hopefully I can be back on track soon.
I hope no one missed me lol...](userimages/customs/37000/36975-1.jpg) Sandman Marvel Legendsby LokoboyI took a break from customizing action figure sometime ago. This Sandman was done more than a year ago, I only had time to take a photo last night.
I...15 comments |
![[Sand] I had down this custom a year ago, but didnt finish it as i needed a head. So when Sandman was released i bought a second for the head for this customs and used the body for my Ra's Al Ghul custom.
Upper head is Hal Jordan, lower head is Sandman on a Starman body. Straps are from 2 Jonah Hexs.
Thanks for looking.](userimages/customs/37000/36626-1.jpg) Sand DC Universeby steve2477I had down this custom a year ago, but didnt finish it as i needed a head. So when Sandman was released i bought a second for the head for this custom...1 comments | ![[Madame Web (Cassandra Web)] Madame Web is a supporting character in the Spider-Man comics, first appearing in Amazing Spider-Man #210 (November 1980). Madame Web is a mutant with psychic sensory powers of telepathy and precognition. Yet these powers came at a price as Madame Web is also blind and paralyzed. As such her chair and it's tubes shaped like a spider's web act as her life support system taking care of her bodily functions. Madame Web uses her powers to advise Spider-Man albeit often in cryptic ways.
Top half of ML Psylocke combined with the lower half of the 90s animated series Madame Web. Widened out and upscaled to 6 inch scale with Apoxie Clay. Painted with Citadel paints.](userimages/customs/36500/36457-1.jpg) Madame Web (Cassandra Web) Marvel Legendsby glennwebman69Madame Web is a supporting character in the Spider-Man comics, first appearing in Amazing Spider-Man #210 (November 1980). Madame Web is a mutant with...6 comments |
![[Sandboy] Okay, here comes the second figure in my series of conjectural characters based upon the premise that what if another Golden Age hero other than Superman was given a teenage superhero career? So, using that idea as my basis, I came up with Sandboy.
To do this figure, I took the Movie Masters Dark Knight Harvey Dent figure (since the Movie Masters figures are in fact shorter than the DC Universe classics figures, and are also the exact same height as the DC Direct Crisis on Infinite Earths Series 3 Earth-Prime Superboy figure) and combined it with the head, hands, jacket, tie, cape, and gun from the DC Universe Classics Sandman figure. I did some minor repainting of the Harvey Dent arms and legs in a shade of green that closely matched the green of the Sandman jacket, as well as a light shade of brown for the Harvey Dent shoes and Sandman gloves, and then trimmed the jacket to fit the slimmer Harvey Dent figure. Lastly, I used some Testors Model Cement to affix the tie and cape in p](userimages/customs/36500/36313-1.jpg) Sandboy DC Universeby manomight1974Okay, here comes the second figure in my series of conjectural characters based upon the premise that what if another Golden Age hero other than Super...14 comments | ![[Cassandra Nova] Cassandra Nova is one of my favourite X-villains. I've always wanted a figure of her and making my Fallen Genosha diorama seemed like the perfect opportunity.
Cassandra is made from a ML X3 Jean Grey figure with parts from ML 2-pack Elektra, coat tails from ML Dracula, hands from a Matrix thug figure and the helmet from ML 2-pack Captain America. Her head is from ML Wasp.](userimages/customs/35500/35447-1.jpg) Cassandra Nova Marvel Legendsby warrackCassandra Nova is one of my favourite X-villains. I've always wanted a figure of her and making my Fallen Genosha diorama seemed like the perfect oppo...4 comments |
![[Sand Trooper] This has been on my desk for over a year. Finaly finished him. These are the droids we're looking for!? This is one of Tatooine's most battle hardened troopers, made from a LCBH Madman, complete sculpt on the armor and the head is from an Epic Force Storm Trooper. Finally he's done...Thanks for looking
CAboose
*UPDATED PICS*](userimages/customs/35000/34985-1.jpg) Sand Trooper Marvel Legendsby CAb00seThis has been on my desk for over a year. Finaly finished him. These are the droids we're looking for!? This is one of Tatooine's most battle hardened...10 comments | ![[Tatooine Buling and Sandtroopers] Hi All
The following pics are of a tutorial I did on how to make and weather Tatooine buildings and Sandtroopers. If you would like to see the WIP just head of to www hemblecreations com and go to the tutorial section.
Ron](userimages/customs/35000/34581-1.jpg) Tatooine Buling and Sandtroopers Star Warsby HembleHi All
The following pics are of a tutorial I did on how to make and weather Tatooine buildings and Sandtroopers. If you would like to see the WIP ju...10 comments |
![[Sandtrooper and Dewback] Hi All
Did this a while ago andhavent had a chance to post yet so enjoy and as always comments welcomed.
Ron
Recipe
Dewback and Sandtrooper - Are from the new set, the Sandy has just had a repaint and I left the articulation so he and be used off and on the Dewback.
The Dewback has had it's joints superglued and sealed using polymer clay. The harness has been removed and replaced with a leather one the only parts I used was the saddle, large rolls and the plastic mouth grips.
The reins have had metal O-rings added and leather used, I used 1/6 buckles to complete the harness. The extra gear is parts from some WW2 German and American equipement.
I decided to give the blaster it's own holster like I did with my 1/6 version and also added a holster for the prode stick as well.
Base - Was one I used for a 1/6 WW2 German dio I did a while ago, I dropped it while I was cleaning a decided to use it for this. The Dewback can come off so it can be moved around.](userimages/customs/35000/34580-1.jpg) Sandtrooper and Dewback Star Warsby HembleHi All
Did this a while ago andhavent had a chance to post yet so enjoy and as always comments welcomed.
Ron
Recipe
Dewback and Sandtrooper - Are...6 comments | ![[Spartacus: Blood and Sand] I did this one a few months back as well. Now that the actor Andy Whitfield has passed on i feel kinda weird posting this one. But i always wanted to make a Spartacus figure so i did.I used a Mattel WWE Ted Dibiase as the base and used Aves for everything else. Armor, beard,belt etc. Still wanna do the helmet as well as a few more characters from this series.Thanks for looking and let me know what ya think.](userimages/customs/34500/34384-1.jpg) Spartacus: Blood and Sand Wrestlingby Sinestro's MightI did this one a few months back as well. Now that the actor Andy Whitfield has passed on i feel kinda weird posting this one. But i always wanted to ...3 comments |
![[Sandman W/ Real Sand] Hey guys, meet Sandman.
He is a heavily sculpted Absorbing man with a custom cast head.
Half of his body is encased in real, sealed sand.
Thanks for checking him out.](userimages/customs/34000/33963-1.jpg) Sandman W/ Real Sand Marvel Universeby bzcustomsHey guys, meet Sandman.
He is a heavily sculpted Absorbing man with a custom cast head.
Half of his body is encased in real, sealed sand.
Thanks...9 comments | ![[Black Bat (Cassandra Cain-Batgirl)] Continuing with the Bat-themed characters, next in line is my personal favorite Cassandra Cain as Black Bat! Cassie is one of my favorite heroines, and was sad when she stopped being Batgirl, but hey now she kicks arse as the Black Bat! This figure was made using the new Legacy Batgirl, and a sculpted head. The cape is made of Faux Leather and can spread wide open or closed. Now if I only had the time to make her in her old Batgirl costume....](userimages/customs/33500/33101-1.jpg) Black Bat (Cassandra Cain-Batgirl) |
![[Marvel Legends Spider-Man Sandman Series Movie VEN] I had received this guy in a bulk lot of figures. His paint was worn, the silver on the eyes was almost non visible. I actually like the original sculpt of the Spider-Man movie Venom, however, I really dislike the gray scale faded colors they went with. One of the many side effects to the way they crammed him into the third movie. In my opinion, Venom is a popular enough character to carry a trilogy of movies on his own without the presence of Spider-Man, but let's leave that debate for another website. What bothered me the most was the awful pale pinkish-rouge that they colored his mouth and tongue with. Well, pulling from suggestions from movie critics, and my own senses, I repainted him with Model Master Paint. I used enamel (because I bought enamel by mistake instead of acryl) Guard red on his mouth and tongue. I used Model Master Acryl Gloss White on his teeth, eyes, and Venom chest symbol. I then applied Model Master Gloss Lacquer Overcoat to him, and I am really happy with how i](userimages/customs/32500/32376-1.jpg) Marvel Legends Spider-Man Sandman Series Movie VEN Marvel Legendsby 1kobocopI had received this guy in a bulk lot of figures. His paint was worn, the silver on the eyes was almost non visible. I actually like the original scul...3 comments | ![[SANDMAN (DC Vertigo)] I always wanted to have a Sandman in my collection, on a scale of 6 or 7 inches. However, the version of DC Direct has never pleased me. So, ever thought of creating a custom, but one could not imagine a good base to stay. With that, time passed, I was perfecting my techniques, until not long ago, I saw this recipe with a custom in FigureRealm. Hence the basis for being able to find and make my own Sandman was a leap.
I tried to include some of the elements present in the stories as the basis, which represents the Fiddlers Green, Matthew the Raven, accessories (mask, Ruby and Sandbag), and give the figure two pairs of hands in different positions.
I used Remy Sota SF, changing little with epoxy and painted with vinyl matt paints. The eyes, specifically, painted with glossy paint. The hair was modeled on the Powergirl DCU. The cloak is woven with glue droplets on different strategic locations, to trim to the ideal. The Fiddlers Green is the basis of Ripclaw McFarlane. The crow and Sandb](userimages/customs/31500/31469-1.jpg) SANDMAN (DC Vertigo) D.C. Universeby Leo CustomsI always wanted to have a Sandman in my collection, on a scale of 6 or 7 inches. However, the version of DC Direct has never pleased me. So, ever thou...12 comments |
![[Sandman] Presenting the 4th figure for my Series 5 Marvel Universe Avengers Riverspoons Custom Series!
SANDMAN
I used Luke Cage figure for this custom, the upper body and arms were sculpted with a sand like texture. As for the head sculpt, I used a German Nazi Soldier I got from unknown toyline, The bighands came from DCU Metamorpho part. I sculpted the arm part so it can fit the figures base arm.](userimages/customs/31500/31282-1.jpg) Sandman Marvel Universeby riverspoonsPresenting the 4th figure for my Series 5 Marvel Universe Avengers Riverspoons Custom Series!
SANDMAN
I used Luke Cage figure for this custom, the up...6 comments | ![[Sandstorm] Thank you so much for you positive comments. Thor was a labor of love and I'm glad to see him positively received.
Here is another Transformer that was released with the DoTM line but they got his colors completely wrong. heres Sandstorm:
Finally got around to reworking the HA Sandstorm into a G1y version of himself. Not much modding here besides a new faceplate. Gave him a repaint job and spattered with dirt to make him look like hes been thru the elements!](userimages/customs/31500/31237-1.jpg) Sandstorm Transformersby ShinobitronThank you so much for you positive comments. Thor was a labor of love and I'm glad to see him positively received.
Here is another Transformer that ...9 comments |
![[Sandman] Spider-man classics Juggernaut, sculpted headgear, boots and body suit. vinyl for shoulder pads, belt and neck band. button for buckle. removeable left arm, with BAF movie Sandman and the Juggy arm. Right arm is from ML Mr. Fantastic. G2G GLORY to GOD! Talk about it!
THIS CUSTOM IS PART OF VOLUME 2 OF MY INCREDIBLE HULK'S GREATEST HITS SERIES
created Jan. 24, 2011](userimages/customs/30500/30227-1.jpg) Sandman Marvelby fastfreddieSpider-man classics Juggernaut, sculpted headgear, boots and body suit. vinyl for shoulder pads, belt and neck band. button for buckle. removeable lef...11 comments | ![[GL Alisand'r] Just a repaint of a Starfire to represent the Tamarian GL. I am planning on doing an update as I am pulling away from DCDirect in favor of DCUC But que cera](userimages/customs/30500/30180-1.jpg) GL Alisand'r DC Directby Bob-A-FerretJust a repaint of a Starfire to represent the Tamarian GL. I am planning on doing an update as I am pulling away from DCDirect in favor of DCUC But qu...0 comments |
![[Sandtrooper Squad Leader - Mos Espa Garrison] I have a number of Sandtroopers that I'm doing for a diorama and have a few left over which I have and will be doing small dio's for, this first one depicts a Sandtrooper Squad Leader in an area in MOS ESPA.
The building section depicts a typical structure that you would find on Tatooine. The only real difference is that I diceded that I would make the walls a little more of a yellowish colour due to the different texture and colour if sand that you would find in different parts of a planet.
As always once I got the look and feel I wanted for both the figure and diorama they were painted and weathered using Vallejo and GW paints and weathered using Vallejo paints and pastels.
RECIPE
Sandtrooper - The Sandtrooper is from the Hasbro Vintage 2010 line and was given a pauldron from a VOTC Sandtrooper, I left the articulation alone on this figure as I will be only supergluing and putting the joints up on figures on my larger dios.
I added thin leather straps to the pauldron](userimages/customs/30500/30098-1.jpg) Sandtrooper Squad Leader - Mos Espa Garrison Star Warsby HembleI have a number of Sandtroopers that I'm doing for a diorama and have a few left over which I have and will be doing small dio's for, this first one d...1 comments | ![[Spartacus (Spartacus Blood and Sand TV Series)] WWE wrestler used a base (I do not know the name). To make the cloth tied on the arms and legs I used pieces of cloth previously painted and tied with seam line. The shin guard was made with pieces of synthetic leather. I made the armor in the shoulder with pieces of the cape of Mr. Sinister and other pieces of plastic cut. Fully painted with vinylic paints.
Well, her face was not identical to the character, because the base was not very similar. But I think overall the figure resembles the character.
The feet are also not in sandals, as they should be, because I had no pair of bare feet to replace. So I painted the boots with an effect that disguised a little dirt.](userimages/customs/30000/29583-1.jpg) Spartacus (Spartacus Blood and Sand TV Series) Originalby Leo CustomsWWE wrestler used a base (I do not know the name). To make the cloth tied on the arms and legs I used pieces of cloth previously painted and tied with...5 comments |
![[Sandata] He's a local comic book hero here in the philippines made by gener pedrina.
Started off as an mu guardian figure, sculpted the three stars and a sun. Painted with acrylics and there you go!
He's my first mu custom. Working with figs at this small scale is very difficult for me. I salute all the customizers who specialize in this scale.
Thanks for looking guys!
Salamat!](userimages/customs/29000/28618-1.jpg) Sandata Miscby getsaHe's a local comic book hero here in the philippines made by gener pedrina.
Started off as an mu guardian figure, sculpted the three stars and a sun...7 comments | ![[Sandra M.] So for my 100th custom I wanted to make something special. The wife said "hey wouldn't I make a great figure?" with that being said it was off to work I went.
She is made of a mash up of different figs. She is a petite girl so I used the X-men movie storm and female ml parts and sculpted the head and hair and corset.
Hope you like it hun
Love u <3](userimages/customs/28500/28487-1.jpg) Sandra M. Marvel Legendsby nuffsaidSo for my 100th custom I wanted to make something special. The wife said "hey wouldn't I make a great figure?" with that being said it was o...4 comments |
![[Sandwraith] I always liked playing as the Sandwraith in the game and I always wanted the action figure. It was very easy to make. I only used a little bit of apoxie for his face, chest and tendrils. I also made the water sword to make him more real.](userimages/customs/28500/28392-1.jpg) Sandwraith Prince of Persiaby Pjb272I always liked playing as the Sandwraith in the game and I always wanted the action figure. It was very easy to make. I only used a little bit of apox...0 comments | ![[Bioshock's 9" Vinylmation Sander Cohen] Bioshock's 9" Vinylmation Sander Cohen
Another Sander Cohen custom, this time I made from a blank white 9" Vinylmation. I used only a pencil and acrylic paints, no stencils or shortcuts. He is by far my favorite villian from Bioshock, so I wanted to point out some of his features I gave him that are also seen in the game.
Starting with his ears, his right ear is the symbol for the "Incinerate" plasmid. Basically gives him fire at his fingertips to defeat foes. His left ear represents the "Houdini" plasmid, which helps him to teleport short distances. As for his head, I wanted to give Sander his face paint he wears in the game. I painted his face in a skin tone, then went over it many times with mostly subtle shades of white and grey. I wanted to give him really creepy eyes that stood out, so they were my focus for his face. Long eye lashes, runny makeup, and bloodshot eyes give this artist / showman that slightly disturbed look. Added a few b](userimages/customs/28500/28218-1.jpg) Bioshock's 9" Vinylmation Sander Cohen Bioshockby joe_of_warBioshock's 9" Vinylmation Sander Cohen
Another Sander Cohen custom, this time I made from a blank white 9" Vinylmation. I used only a pen...1 comments |
![[Spartacus - Blood and Sand.] Iron Fist is a horror of a base fig to work with because of his unique shape and collars tht are roted very deep. Took a lot of contruction to get a basic shape and more grinding than most to get posable.
Feet are from leonidas, wraps from putty, head from WCW's DDP, hair from sculpy, sword is a 300 recast, sheild is made from recasts of 2 different shields I had from Gladiator figurines, with a wood and leather handle.](userimages/customs/27000/26887-1.jpg) Spartacus - Blood and Sand. 300by jumbokaggraIron Fist is a horror of a base fig to work with because of his unique shape and collars tht are roted very deep. Took a lot of contruction to get a b...3 comments | ![[Bake-Zouri(Haunted Straw Sandal)] Tsukumogami (付喪神, "artifact spirit") are a type of Yokai (Japanese monsters and or spirits). According to the Tsukumogami-emaki, tsukumogami originate from items or artifacts that have reached their 100th birthday and thus become alive and aware. Any object of this age, from swords to toys, can become a tsukumogami. Tsukumogami are considered spirits and supernatural beings, as opposed to enchanted items.The most well known Tsukumogami are the Obake-Kasa(Haunted umbrella,my first tsukumogami action figure),the Bake-zouri(haunted straw sandal),the Chochin-obake(haunted Paper llantern),and the Biwa-yanagi(Haunted Asian lute).
Here is my Bake-Zouri action figure submitted for your approval.
Bake-Zori(haunted straw sandal) ingredients:I sculpted the zouri from clay over an empty Rit Fabric dye box I had(I made the thong part from some twine-rope).I used some Doc mego arms(I had in one of my parts bags)for his arms.and I used some CTVT legs(from th](userimages/customs/27000/26814-1.jpg) Bake-Zouri(Haunted Straw Sandal) Megoby YokaiJohnTsukumogami (付喪神, "artifact spirit") are a type of Yokai (Japanese monsters and or spirits). According to t...0 comments |
![[Bioshock's Sander Cohen (Version 2) with Mannequin] Bioshock's Sander Cohen (version 2) with Mannequin
MORE PICS ON MY BLOG...
joeofwarcustomactionfigures.blogspot(dot com)
This is my second attempt at Sander Cohen, Bioshock's resident disturbed artist. I used a different base figure for him and I also wanted to add one of his creepy mannequins that appear, and reappear many, many times in Fort Frolic. I'm not sure what the base figure for Cohen was, but it's dated 2000 and was all white and easy to paint over. Cohen's mannequin was made to look like he used plaster over a human body. I used a plant for the mannequin's rabbit ears, which fans of the game will understand. (Note he no longer has any arms even if he wanted to take them off). And on the plaster Sander seems to have painted little moths...creepy.
Cohen is holding a splicer mask that he repainted to his liking. He also includes a flower and paintbrush that I used Aves Apoxie and a toothpick to make. Check out those classic two-tone kicks! I think Sander would def](userimages/customs/26500/26484-1.jpg) Bioshock's Sander Cohen (Version 2) with Mannequin Bioshockby joe_of_warBioshock's Sander Cohen (version 2) with Mannequin
MORE PICS ON MY BLOG...
joeofwarcustomactionfigures.blogspot(dot com)
This is my second attempt a...2 comments | ![[Sand Man] For the Sand Man I used a MU Cage with a WWE head. Used part of the ML Sand Man hand then added it to the MU figure.Used apoxie sculpt to add all the sand texture on his right arm. Thanks for looking and as always comments are welcome.](userimages/customs/26500/26058-1.jpg) Sand Man Marvel Universeby issaim98For the Sand Man I used a MU Cage with a WWE head. Used part of the ML Sand Man hand then added it to the MU figure.Used apoxie sculpt to add all the ...4 comments |
|