![[Vision (White)] Always one of those figures I wanted to do. Had the base parts, had the paint, but just always got sorta nudged away since he's a plain white custom and it's really easy for those to look plain and be incredibly difficult to shade. I thought he came out pretty well though now that I finally got around to it, and it really is my favorite look for the Vision. When he was wearing this he'd been rebuilt without human brain patterns so he was a cold, emotionless shell so the look fit him really well.](userimages/customs/36000/35828-1.jpg) Vision (White) Marvel Legendsby raybotAlways one of those figures I wanted to do. Had the base parts, had the paint, but just always got sorta nudged away since he's a plain white custom a...13 comments | ![[Vision (Mid-Phase)] One of my greatest collector regrets was leaving a Marvel Universe Vision on the shelves, because back then I wasn't that into Marvel Universe. Once I got into it, the secondary market value of Vision wnet through the roof, so I was stuck without a Vision. When the variant came out, I knew instantly what I wanted to do; not just settle for a "plain" Vision, but one where he was in the middle of going intangible. A few hours and a few coats of paint, viola!](userimages/customs/36000/35506-1.jpg) Vision (Mid-Phase) Marvel Universeby GDXOne of my greatest collector regrets was leaving a Marvel Universe Vision on the shelves, because back then I wasn't that into Marvel Universe. Once ...4 comments |
![[Previsionary] Starting the week with another original character. This dude is called "Previsionary". He's a Stephen Strange type character. Only, he doesn't require amulets, books and magic items. He was made from a Bullseye body with a Longshot head + Cap boots & DCUC cape. Hope you like him guys! God bless.](userimages/customs/35500/35235-1.jpg) Previsionary Originalby loosecollectorStarting the week with another original character. This dude is called "Previsionary". He's a Stephen Strange type character. Only, he doesn...11 comments | ![[Vision] I found a variant vision at retail the other day so I decided I don't love the transparent plastic](userimages/customs/33500/33249-1.jpg) Vision |
![[Vision] After seeing they made a Dr. Manhattan figure in which he is displayed levitating.what I really saw was Vision, I wanted him to have an Android effect so I went with a metallic paint job. This custom really wasn't that difficult to achieve, started by connecting the levitating legs rather than the standing legs, game him a silver base coat then used clear yellow and green paint accordingly to accomplish the metallic paint job, red face and white eyes (all paint was Tamiya colors) as far as the cape, it was from a ML vision and was not painted metallic because I did not want it to blend with the figure, and also I figured vision is the Android not his cape lol. Comments welcomed](userimages/customs/33000/32980-1.jpg) Vision Marvel Legendsby TommyGunn79After seeing they made a Dr. Manhattan figure in which he is displayed levitating.what I really saw was Vision, I wanted him to have an Android effect...2 comments | ![[Vision] Here's Vision in his less older costume. He was made from the following parts: AbinSur head, Yellowjacket upper half, DCUC fists, Black Spidey lower half, Havok feet, Warlock cape. Rest is sculpted detail. We gave him an extra-shiny finish as we "think", Vision is a dude with sleek metal skin, finished like a supercar instead of a guy in spandex. Hope you like him guys. God bless!](userimages/customs/32000/31976-1.jpg) Vision Marvel Legendsby loosecollectorHere's Vision in his less older costume. He was made from the following parts: AbinSur head, Yellowjacket upper half, DCUC fists, Black Spidey lower h...25 comments |
![[Vision] Vision is one of my favorite marvel characters growing up and reading comics. I wanted to make one a little bigger and muscular than the 2 versions we got from the manufactures.
Recipe
FO Punisher
Warlock Cape
DCU Red Toronado head (sculpted)
feet only from Bullseye
Hope you like him
Steve](userimages/customs/31500/31360-1.jpg) Vision Marvel Legendsby StevidVision is one of my favorite marvel characters growing up and reading comics. I wanted to make one a little bigger and muscular than the 2 versions we...22 comments | ![[Batman Fabric Cape: Early Revisionist Toymaker] This is another early early figure from about 5 years ago. This was one of the coolest I had done to a point. I was mainly heavy into my early efforts to create the ultimate Christopher Reeve (just click on my Creator name to see #1) but after working with the fabric capes for a minute I kept wanting to do something with the awesome batman figures that were coming out. Up to then there was only DCSH Batman 1 and DCSH Batmans Blue and Black II. so I took Blue II, cut off the cape to a "V" on the backand took a plate and layed it down on a sheet of blue polyester (really heavy) and started to rotary cut these scallops til I had a huge perfectly round "starburst". Then I took a 1/12 slice out of it for the break in the front. Popped it back onto Bats' body and then popped the head/cowl assembly back on and hot-glued it back together and gave a little spatter treatment with black spray-paint. These were the results.
The polyester was very weighty and didn cowlick like](userimages/customs/31500/31084-1.jpg) Batman Fabric Cape: Early Revisionist Toymaker DC Superheroesby GeekSummitThis is another early early figure from about 5 years ago. This was one of the coolest I had done to a point. I was mainly heavy into my early efforts...17 comments |
![[Vision] I used a ML Icon Cyclops and removed visor. Sculpted eyes and brow below forehead. Sculpted head as well. Used foamies for shoulder pad looking thing and attached gold cape. Sculpted gold pendant on chest and belt. Painted and done. Just my own twist on vision. Made him before but wasn't thrilled about my first version, not sure im completely happy with this one... ah whatever! Let me know what you think.](userimages/customs/30500/30198-1.jpg) Vision Marvel Iconby ChazzoI used a ML Icon Cyclops and removed visor. Sculpted eyes and brow below forehead. Sculpted head as well. Used foamies for shoulder pad looking thing ...1 comments | ![[Vision] Always searching for more power to my Avengers team, I decided to do the Classic Vision. I once again used Dr. Manhattan figure as my base( need to sell him in a multipack...really good as a base figure). Painted the body Green with red face, kept the Awesome eyes the wat they were. Painted the belt,shorts & boots gold(many different renditions of his belt cut in the comics). Painted the chest diamond design & forehead gem Testors Shimmer gold, then made his cape. I like to set him with my Wonderman for the Duality of it. Comments welcomed.](userimages/customs/29500/29206-1.jpg) Vision Avengersby CapSoldierAlways searching for more power to my Avengers team, I decided to do the Classic Vision. I once again used Dr. Manhattan figure as my base( need to se...1 comments |
![[Vision] When hasbro released Vision I was just getting back into collecting figures again. I was at ToyRUs and actually held the Vision figure in my hand, and I actually put him back on the wall. I was disapointed in the figure of how short it was and didn't see the need to buy it at the time. Though if I known better considering how pricey it is to get one online, I quess I should have grabbed it. Oh, well you live and you learn. Googled a few photos of Vision, picked out the one I like the best and went to work. Johnny Storm body with Multiple Man head not a bad combo. So hope ya'll like this one, comments are welcomed!](userimages/customs/27500/27362-1.jpg) Vision | ![[The Vision] I Just Dry Brushed Some Lighter Greens And A Lighter Red On the Body. (Red Is On Face)](userimages/customs/26000/25633-1.jpg) The Vision |
![[DC Universe Vision] Hello. I used Steels head from the Metal Men, Iron Fist body, cape from Marvel Legends Vision. Some minur sculpting around forehead and filled the Iron elemental symbol. Sanded the paitn rub areas and lightly primered and airbrushed. Thanks for looking.](userimages/customs/25500/25281-1.jpg) DC Universe Vision Marvel Legendsby Comicustoms!Hello. I used Steels head from the Metal Men, Iron Fist body, cape from Marvel Legends Vision. Some minur sculpting around forehead and filled the Iro...6 comments | ![[Vision] Vision was made fron a black panther base...the head was from an astral professor X and was not painted...the yellow dot is plastic...the chest diamond was painted on and the belt is a styrene strip cut to shape...the cape is from the last ML Vision figure and fits this figure much better...the left knee joint was cut so he stands differently from the way he was manufactured.](userimages/customs/24500/24379-1.jpg) Vision Avengersby nmhs custom figuresVision was made fron a black panther base...the head was from an astral professor X and was not painted...the yellow dot is plastic...the chest diamon...0 comments |
![[Icons Vision] This is a repaint of the Surfer with a cape made from silk and a foam cowel. The Ant-Man was a DD Heroclix. Thanks for looking!](userimages/customs/23500/23220-1.jpg) Icons Vision Marvel Iconby HMcCoyThis is a repaint of the Surfer with a cape made from silk and a foam cowel. The Ant-Man was a DD Heroclix. Thanks for looking!...1 comments | ![[Vision] Used a JLA Dr. Impossible as the base which worked well I think started off by cutting the circles off the cape where it attached on the chest then filled and sculpted new cape ended also sculpted the diamond on his chest and filled any figure gaps that I didn't want with aves then a little sanding on the gloves because they where large cuff ends and I wanted them to be more like fore arms all the sems around the gloves and face where done with a hot knive and then sanded.Paints are a mix of model master insignia yellow and blue for the green and then just insignia yellow and red where needed after that I gloss coated everything but the cape for that android look.He's a bit taller that my other marvel legend figures but I kind of like that I think it fits with the character it was a simple custom to do but I like it let me know what you think,thanks for looking!](userimages/customs/23500/23063-1.jpg) Vision Avengersby mbosky99Used a JLA Dr. Impossible as the base which worked well I think started off by cutting the circles off the cape where it attached on the chest then fi...1 comments |
![[Lou Ferrigno Television's Incredible Hulk Version ] Same recipe as version 1, but I really wasn't happy with the sculpted hair. It just didn't make me think of the mop that Ferrigno wore...I wished I had a wig for him, then I thought, WHY DON'T I MAKE ONE?!!!
I took some fun fur and sized it up, sewed it to fit, gave it a dye job and a trim, and then attached it to the head.
Now I have a mop on my Ferrigno Hulk's head just like in the show!
I also gave it a new series of dry brushed layers, to wash out the colour like Ferrigno's paint. I think it was too bright and vibrant a green before in comparison to the show. I also noticed something in several photos. On Ferrigno's feet, when he wasn't wearing green coloured sock booties (yeah weird eh?), the paint had wiped off. So I give it some skin tones on the bottom to simulate where the costume paint had worn off, and gave him a bit of dirtiness on the balls of his feet. I mean the guy is walking around set with his bare feet. They get dirty.
So these are the changes, I hope you li](userimages/customs/23000/22971-1.jpg) Lou Ferrigno Television's Incredible Hulk Version Incredible Hulkby pulpyfictionSame recipe as version 1, but I really wasn't happy with the sculpted hair. It just didn't make me think of the mop that Ferrigno wore...I wished I h...20 comments | ![[Vision] Head: Hasbro ML Vision
Cape: Hasbro ML Vision
Body: DCSH Superman](userimages/customs/23000/22641-1.jpg) Vision |
![[Lou Ferrigno Television's Incredible Hulk] As a kid, I would run home if I was out so I could watch Marvel's classic series, The Incredible Hulk. Playing the title role was the legendary body builder, Lou Ferrigno. In honour of this man-monster, I really wanted to make this figure. I know people have used similar recipes to make this guy, but I hope mine is different enough to stand on its own merit.
Recipe:
jakks pacific wwe wrestler body(unknown)
jakks pacific HHH head
jakks pacific ufc figure legs (from knees down)
I used this other figure from the Jakks line of wrestlers, I don't know who he is, but his frame is different from the HHH and Batista body type, his chest is bigger and I think it matches that of Ferrigno really well!
I carved and cleaned off the HHH head's beard and hair, sculpted bigger brow ridges, and eyebrows, and the mop of hair on his head. I didn't know exactly which era or style to model it after (as it did tend to change from time to time, between the show to the t.v. movies, and in different prom](userimages/customs/23000/22537-1.jpg) Lou Ferrigno Television's Incredible Hulk Incredible Hulkby pulpyfictionAs a kid, I would run home if I was out so I could watch Marvel's classic series, The Incredible Hulk. Playing the title role was the legendary body ...10 comments | ![[Vision] At first glance, it looks like the paint ran out, but the object was to illustrate the Android as though he were using his phasing ability. The MM base figure was transparent from head to toe, just needed to resculpt the head and chest, replace the boots from an Aquaman figure. Wanted to use feet that had ankle articulation, perfect for flying poses.
The material on the cape was very slippery (like gelatin), a real hand sore to paint the yellow with a fading effect. Airbrushing it just caused the paint to streak and run, making a godawful mess. Tried enamel paint, hoping that would adhere better - it did, but didn't like the results at all - too lumpy. Had to scrub off the enamel and re-start. Needed to prime the surface of the cape with a satin clear coat spray, allow time to dry. Using a combination of hand paint and airbrush to reapply the yellow for a smoother, more convincing fx.
thanks for checking this out!](userimages/customs/22500/22376-1.jpg) Vision DC Directby N TTAt first glance, it looks like the paint ran out, but the object was to illustrate the Android as though he were using his phasing ability. The MM bas...5 comments |
![[Sonar Vision Batman TDK Movie Master] Here's my take on the Sonar vision Batman figure.
All I did was take a regular TDK movie master and paint the eyes and add some gloss finish.
IMHO, mattel pretty much ruined the sonar vision batman ( not giving us what they pictured behind the card) and I don't see why they had to add battle damage to the figure, since the movie did not realy have any battle damage on the suit( the two face-gordon part) which was post the fight with joker.](userimages/customs/22000/21591-1.jpg) Sonar Vision Batman TDK Movie Master Batman: Movie Styleby ShanHere's my take on the Sonar vision Batman figure.
All I did was take a regular TDK movie master and paint the eyes and add some gloss finish.
IMHO, ...0 comments | ![[Avengers United We Stand Vision] Based loosely on his appearance in Avengers:United We Stand,the Vision is made from a Marvel Universe Iron Man with a Modified Star Wars Clone Wars Kit Fisto head.](userimages/customs/21500/21127-1.jpg) Avengers United We Stand Vision |
![[Vision] Hi long time no see but this is my second figure the vision its really hard to get 1 so I made one. I had 2 supermans and a broken iceman. But icemans head didn't fit right so I had to saw sups neck off a little and hot glue icemans head on I do know about joints but I didn't at the time.](userimages/customs/19500/19010-1.jpg) Vision Marvel Legendsby hulksmashHi long time no see but this is my second figure the vision its really hard to get 1 so I made one. I had 2 supermans and a broken iceman. But icemans...5 comments | ![[Vision] Hey guys.
Finishing up some customs I started awhile ago.. I have more coming through the week. Check out my myspace page for sneak peeks.
anyhow,
This my version of the Vision. Taking the andriod look a bit further. I saw the movie Ironman figures and was disappointed at the thinness of them but it worked well in making this custom.
Recipe is ML Vision Head and Cape with a Movie Ironman body.
Thanks for looking and comments and feedback appreciated.](userimages/customs/18500/18221-1.jpg) Vision Marvel Legendsby Madtinker76Hey guys.
Finishing up some customs I started awhile ago.. I have more coming through the week. Check out my myspace page for sneak peeks.
anyhow,
Th...6 comments |
![[Vision (Young Avengers)] Needed to make me a Young Avengers Vision for my Young Avengers collection. A simple paint job of green gold and the red diamond on his chest. Fin~](userimages/customs/18000/17855-1.jpg) Vision (Young Avengers) Marvel Legendsby Eniam_RejNeeded to make me a Young Avengers Vision for my Young Avengers collection. A simple paint job of green gold and the red diamond on his chest. Fin~...2 comments | ![[Vision] Esta figura esta realizada casi toda de Nighthawk (Esquadrom Supremo) , exceptuando el brazo izquierdo que es de Electro . La capa fue esculpida y rellenada con milliput .
No fue una figura dificil de hacer , pero espero que os guste .
Base :
- Cuerpo ( Nighthawk )
- Brazo izq ( Electro )
This figure realized almost everything of Nighthawk (Esquadrom Supremo), exempting the left arm that is of Electro. The cape was esculped and refilled with milliput.
It was not a figure difficult to do, but I hope that you like.
Base:
- Body (Nighthawk)
- Arm left (Electro)](userimages/customs/18000/17702-1.jpg) Vision Heroclixby HULK13Esta figura esta realizada casi toda de Nighthawk (Esquadrom Supremo) , exceptuando el brazo izquierdo que es de Electro . La capa fue esculpida y rel...1 comments |
![[DCUC Vision] For this custom I used the head off of the Toy Biz Vision, the body of a DCUC Aquaman(Camo0, and a DCUC Series 1 Batman's boots. These specific parts were requested by one of my regulars and I think the figure came out fantastic. It was just a basic limb swap/repaint, with a sculpting of the diamond.](userimages/customs/17000/16712-1.jpg) DCUC Vision D.C. Universeby cbrocustomsFor this custom I used the head off of the Toy Biz Vision, the body of a DCUC Aquaman(Camo0, and a DCUC Series 1 Batman's boots. These specific parts ...3 comments | ![[Superman Heat Vision] Was at a bowling alley and they had the coolest stir-sticks for their drinks, all neon green and halloween orange. Swiped a pair of these clear red sticks, whittled the tips to fit into Supes eyesockets. Decided to resculpt the mouth with more emotion, replaced the hands for a bigger pair of mits, and exchanged the boots from a Superfriends Supes. Wanted to find a big cape, but not dragging down on the ground, and also have lots of flowing action to it - bingo, the Ozzy Osborne fig by Mcfarlane had such a cape! Repainted the cape and figure, and added a handsome head.
Thanks for having a look!](userimages/customs/17000/16657-1.jpg) Superman Heat Vision Supermanby N TTWas at a bowling alley and they had the coolest stir-sticks for their drinks, all neon green and halloween orange. Swiped a pair of these clear red st...2 comments |
![[Vision Cape Mod] We were tired of the big cape throwing off the balance of Vision, so we cut it down a notch.](userimages/customs/14000/13982-1.jpg) Vision Cape Mod | ![[Vision #1] This a reworked and repainted Red Tornado figure.
Added a sculpted belt](userimages/customs/13500/13344-1.jpg) Vision #1 |
|