![[Wonder Boy] Okay, here comes the fourth figure in my series of conjectural characters based upon the premise that what if another Golden Age hero other than Superman was given a teenage superhero career? So, using that idea as my basis, I came up with Wonder Boy. This one isn't so much a what if another Golden Age hero had a teen superhero career, so much as it is a what if DC had never sued Fox Publications over Wonder Man. Hypothetically, Victor Fox and Will Eisner would have continued publishing Wonder Man adventures, giving him parallels to everything that Superman had or would eventually have...he would probably have had parallels to Luthor, Ultra-Humanite, the Prankster, Mister Mxyztplk/Mxyzptlk, and Superboy, etc.
To do this figure, I first took a Silver Age Superboy/Supergirl Boxset Superboy figure and, using the boil and pop method, completely disassembled the figure. Next, I used my Dremel to remove the figure’s cape, belt, and boot tops. Next, while the figure was disassemble](userimages/customs/50000/49554-1.jpg) Wonder Boy DC Directby manomight1974Okay, here comes the fourth figure in my series of conjectural characters based upon the premise that what if another Golden Age hero other than Super...0 comments | ![[Bruce Lee] For the recipe I used GI Jo quick kick, sculpted hair. Upper torso mu Spider-Man, and full legs are mu ghost rider. Sculpt is applied to full leg for his Kung fu look. So hope you all enjoy and have a good one!](userimages/customs/50000/49928-1.jpg) Bruce Lee Bruce Leeby FrozenBlackCustomzFor the recipe I used GI Jo quick kick, sculpted hair. Upper torso mu Spider-Man, and full legs are mu ghost rider. Sculpt is applied to full leg for ...6 comments |
![[Horde Trooper Commander V4 (Concept Armor Series)] Concept armor series continues with another re-design: The Horde Trooper!
The figure is made out of the torso, arms, and feet of the newly released Iron Monger from Hasbro, (which make it much more unique) with resculpted head,added Horde Symbol, and heavily influenced by the comic book come the symbols on his forearms and the gold circles on top of the shoulder pads.
The paint job had to be unique since these guys see a lot of combat, hence I gave it a combat worn look on the armor detailed with oil drips, mud on his feet and rusty panels from the many worlds conquered!
I think this to me is the perfect Horde Trooper. The vents on his back, the feet, the build, make it the perfect intergalactic bully. Unfortunately making several of these would cost a fortune since most of the Iron Man figures have to be bought.
Thanks for checking it out!](userimages/customs/50000/49927-1.jpg) Horde Trooper Commander V4 (Concept Armor Series) | ![[The 10th Doctor (Anime)] Decided i wanted to make anime versions of all the Doctors so i started with my favourite, the 10th! Took a figma emiya kiritsugu and completely repainted him.
The figure has spare lower arms (so his hands can pose into the pocket), Several spare hands and two spare faces (Smiling, glaring)](userimages/customs/50000/49899-1.jpg) The 10th Doctor (Anime) Doctor Whoby TomCareBearDecided i wanted to make anime versions of all the Doctors so i started with my favourite, the 10th! Took a figma emiya kiritsugu and completely repai...5 comments |
![[Wonder Man] I've been pretty busy lately, and haven't had a chance to work on any of my customs. So last night I took the time to finish my Wonder Man. I've seen similar recipes used before. The body is a Mattel WWE Brian Pillman, with a DCUC Aquaman head, the wrist bands are small rubber o-rings, and the belt is a rubber band. Then a little paint, and I have a nice Wonder Man for my collection.
Update: Added gray highlights to Wonder Man hair and touched up his eyes then sprayed him with Testors Dull Coat.](userimages/customs/39000/38585-1.jpg) Wonder Man Marvel Legendsby 1987olds442I've been pretty busy lately, and haven't had a chance to work on any of my customs. So last night I took the time to finish my Wonder Man. I've seen ...13 comments | ![[Angel] This was a fun project. I started it around the same time as my Cyclops, but Angel took a little longer to complete due to grafting ML Angel's wings onto the DCUC body. The Recipe is shoulders, mid and upper torso, and feet from DCUC wave 7 Blue Beetle, waist and legs DCUC Black Hand, hands DCUC blue camo suit Aquaman, biceps and forearms DCUC Eclipso, and finally head and wings from ML Angel.](userimages/customs/38000/37761-1.jpg) Angel Marvel Legendsby 1987olds442This was a fun project. I started it around the same time as my Cyclops, but Angel took a little longer to complete due to grafting ML Angel's wings o...7 comments |
![[Darkseid Omega] For the recipe I used mu thanos head, altered the head with sculpt applied for the Darkseid look. Upper torso and arms are from mu hulk. Sculpt is applied to neck, back, chest, shoulders, forearms, hands and belt. Upper legs are also mu hulk and lower are wwe Brock Lesnar with sculpt applied to the lower legs for boot look and extension of height. In Young Justice I noticed that they put an apokolips symbol on his belt and I thought that was unique so I decided to add that similar design to his belt. So hope you all like and have a good one!](userimages/customs/50000/49892-1.jpg) Darkseid Omega | ![[Krang] Well guys I bring to you my KRANG,this guy was fun to put togather.
I think it came out OK,Lots of fodder parts I used on this big fella.
I also want to give a shot out to Green Skin,Toyguru and Loosecollector their Krang's are off the chain....Thanks WB!](userimages/customs/50000/49907-1.jpg) Krang |
![[Granok] Hi guys,I bring to you Granok from the 80's cartoon and figures Inhumanoids...
Just trying to use some of those fodder parts....want to start army building?
I hope you guys like him,WB!](userimages/customs/50000/49906-1.jpg) Granok Inhumanoidsby windblock2007Hi guys,I bring to you Granok from the 80's cartoon and figures Inhumanoids...
Just trying to use some of those fodder parts....want to start army bui...3 comments | ![[New 52 Starfire] For the recipe I used dc infinite heroes Starfire head, repainted her face and hair. Used mu medusa body applying sculpt to neck and shoulders, applying sculpt to breast for enhancement, and sculpted her arm guards. Sculpted her new signature panties and applied sculpt to upper and lower legs for her boot look. So hope you all enjoy and have a good one.](userimages/customs/50000/49867-1.jpg) New 52 Starfire |
![[She-Ra She-Man Kitty] That one is for a female friend, she wanted an action figure so kitty may be a good idea. Its barely flocked, handmade clothes, original motuc accs, and very articulated. Its a monster.](userimages/customs/50000/49878-1.jpg) She-Ra She-Man Kitty | ![[Green Goblin (Variant)] Got tired of Eclipso, he surprisingly mimics green goblin's look with the right paint job.](userimages/customs/46500/46499-1.jpg) Green Goblin (Variant) |
![[Supergenius] Not much to say, a future Superman Squad Hero
He was created from:
DC Direct Hawkman Fodder
DC Direct DC Comics Present Super Evolved Superman Head
Followed by a full repaint.
Thanks for looking!](userimages/customs/36000/35652-1.jpg) Supergenius DC Directby KryptonianMDNot much to say, a future Superman Squad Hero
He was created from:
DC Direct Hawkman Fodder
DC Direct DC Comics Present Super Evolved Superman Head
...1 comments | ![[Razer] Hello evreybody,custom razer's made from abin zur(black lantern)and timber wolf arms,starting with the head,scraped the hair,reshaped 2 semi hard plastic for that horn like design on the headgear glued it first then sculpted over the entire head gear in turns it became support for them when completely dried,i trimmed down the square jaw line of the head ,razer's chin looks more slim in the cartoons and very much young
for the body i sculpted some details on it,and put the red lantern emblem using a hobby pen,for the gloves just like i did with the head gear, but the difference is that it is rubber(reshaped) so it wont get removed or tangled when hes undergoing poses it just retains itself back..for the flames it belonged to a human torch repainted with clear red, so it wont appear flame but more like power/rage energy..thank you and good day](userimages/customs/50000/49869-1.jpg) Razer DC Universeby rexticonHello evreybody,custom razer's made from abin zur(black lantern)and timber wolf arms,starting with the head,scraped the hair,reshaped 2 semi hard plas...8 comments |
![[Quake 1 Player] I have made the Quake 1 marine character (player), in honor to the hundreds hours spent more than 15 years ago on this mighty game.
Sculpted in green stuff and plasticard on an Indiana Jones range figure, trying to give to it that gothic appeal like the game had.
90% of figure surfaces were covered with green stuff, so base figure is only hardly recognizable.
Axe and double shotgun were scratch-built in plasticard and metal tubes.
Hope you like it!
Cheers](userimages/customs/46000/45516-1.jpg) Quake 1 Player | ![[Girder (Flash Rogues)] We need all units to loading bay! GIRDER IS OUT!!! "And I ain't goin back SO COME ON!"
Ex-steelworker Tony Woodward, A.K.A. Girder, is a super-villain and enemy of the Flash. Tony caused a riot at a steel plant after he assaulted a female employee. Angry coworkers threw Tony into a vat of molten steel. The liquid steel included recycled scraps from experiments performed by S.T.A.R. Labs. These scraps somehow turned Tony's body into living metal. Tony's new body looked like it had been put together in a scrapyard.
Girder was arrested for robbery and sent to Iron Heights until he escaped with a number of other prisoners during a viral outbreak at the prison.. After escaping Iron Heights, he joined up with Blacksmith and her Rogues to take over Keystone City and Central City.
He later appeared as one of the Rogues being mind controlled by the Top in Rogue War. Girder was also one of the villains sent to planet Salvation. He was among the villains recruited by Tapeworm to](userimages/customs/50000/49783-1.jpg) Girder (Flash Rogues) |
![[Weapon X Deadpool / Wade Wilson] Weapon X Deadpool
I wanted to make a Marvel Legends style Weapon X style Deadpool . It seems like everyone is making Deadpool customs but none are really unique. Everything looks similar with him in the red costume or him in X-Force gear. So to be different, I went back and made a pre-mercenary Deadpool. He appeared in the comics a few times in this suit, during flashback scenes.
I’ve seen other customs of this costume but wanted to keep him as different as possible. So the first thing was to give him an interchangeable head system. The heads are magnetic, using mini rare earth magnets, and he keeps his range of motion.
After I finished painting his unmasked head, I decided to make an unscarred version based on some of the comic book scenes crossed with Ryan Reynolds who played him in the horrific Wolverine Origins Movie. All three heads are interchangeable and he was given a removable plastic hood that can be attached to the neck when you have him posed with either un](userimages/customs/50000/49706-1.jpg) Weapon X Deadpool / Wade Wilson | ![[The Pink Crusader] Howdy! We, at the WGC have been hard at work trying to create and auction off customs to raise money for Samantha Scott, fiance of Toymaker B, Bill Doetter. Samantha is battling her second bout with cancer and the treatment costs, as many are aware, are astronomical. Many creators in the art community, including pros like the Shiflett brothers are donating, creating and auctioning items to help with these costs.
This is The Pink Crusader. She's a superhero that fights against and educates people about breast cancer. I thought she was a great choice for the benefit.
The figure is a Donna Troy base with Raven lower legs and restructured Harley Q. arms. A Black Widow head got a Mickie James hairdo and all the other details are sculpted. The cape was from Big Barda I believe.
The "Pink Power" base is included in the auction. If interested, ALL of the profit from the sale is going directly to Sam's Youcaring account. That link happens to be at the top of the main page here](userimages/customs/50000/49832-1.jpg) The Pink Crusader |
![[Mortal Kombat Jax (Special Force )] i used metalic grey paint and apoxie and male barbie pants and a gun from marvel hope summers and for the belt i used a hair elastic and for the name tags its foam craft and flexible metal.hope you like it.](userimages/customs/48500/48302-1.jpg) Mortal Kombat Jax (Special Force ) Mortal Kombatby mistic*Mistyi used metalic grey paint and apoxie and male barbie pants and a gun from marvel hope summers and for the belt i used a hair elastic and for the name ...9 comments | ![[Mortal Kombat Johnny Cage ( MK1)] i used paint and foam craft and apoxie and tisue similation and just gave him a repaint job on wwe John Cena to give Johnny Cage with is first outfit ever been invented in Mortal Kombat 1.hope you like it.](userimages/customs/48500/48366-1.jpg) Mortal Kombat Johnny Cage ( MK1) Mortal Kombatby mistic*Mistyi used paint and foam craft and apoxie and tisue similation and just gave him a repaint job on wwe John Cena to give Johnny Cage with is first outfit ...2 comments |
![[Ro-Jaws] This is my custom six inch schale Ro-Jaws figure with turning wheels and an opening chest door equipped with a magnetic latch. This guy was a tone of work so I hope you all like him :)
Head: sculpt with a ground down and dulled pin for the antenna,
Body: contact case bottle+fodder and lots of sculpt,
Arms:G.I. Joe arms with fodder pieces for hands and a little sculpt,
Big wheel: a plastic container filled with casting plastic and drilled with some sculpt,
Small wheel: part of a dowel sanded smooth and drilled
Large wheel covering: some gundom parts, sculpt, foeme in the front, and part of two large Popsicle sticks drilled with a toothpick through them for the wheels spoke,
Small wheel covering: Small Popsicle sticks cut and glued into place with part of a toothpick for the spoke and a tone of sculpting,
Door hinge+interior: I used gorilla tape(which is permanent and will never EVER come off) for the hinge, and I gave the door a magnetic latch, and I also filled part of the inter](userimages/customs/49500/49273-1.jpg) Ro-Jaws 2000 ADby pock63This is my custom six inch schale Ro-Jaws figure with turning wheels and an opening chest door equipped with a magnetic latch. This guy was a tone of ...5 comments | ![[Queen Bee] Hello everyone,first of the head i removed the hair,sculpted a new one,sculpted the bee like eyes,and looks to me an antanae on his ears..
For the body i sculpted some on the details on the legs,for the arms i sculpted which appears a bee hive gun idk...as for the gun found a scaled gun and sculpted over for a more accurate look, thanks and happiness everyday..](userimages/customs/50000/49850-1.jpg) Queen Bee DC Universeby rexticonHello everyone,first of the head i removed the hair,sculpted a new one,sculpted the bee like eyes,and looks to me an antanae on his ears..
For the bo...5 comments |
![[SUPERMAN - George Reeves] Hey all...I'm guessing FitzJedi is gonna LOVE this one! Made him using a DCUC First Appearance Batman to avoid any paint rub and modified a DCUC Lightray head since it had the smiley face. Basically sculpted all the costume details over the existinig body and added the folds and designs. He's still fully articulated and the paint is good and sealed. Oh yeah, the cape actually came from a Movie Masters Batman. I chose it because George didn't have a big flowing cape, just a straight down cape and this one worked perfectly. thanks for looking. He'll be on eBay later in the day](userimages/customs/50000/49825-1.jpg) SUPERMAN - George Reeves Movie Mastersby matthancockHey all...I'm guessing FitzJedi is gonna LOVE this one! Made him using a DCUC First Appearance Batman to avoid any paint rub and modified a DCUC Light...17 comments | ![[Dr. Strange] This was a fun learning experience. First off I didn't like how short the Marvel Legends Doctor Strange was, so I had make him taller. For his new waist and legs I used parts from a DCUC wave 7 Blue Beetle. To make them fit under Dr. Strange's shirt I had to use my dremel tool to grind down the DCUC waist. I also dremeled down the inside of his biceps to make his arms sit more flush against his torso.
Recipe:
Head, arms, torso, and cape ML Series 9 Doctor Strange,
Waist, legs, and feet DCUC wave 7 Blue Beetle.
I had to dremeled down/mod the DCUC waist to fit under his shirt.](userimages/customs/39000/38691-1.jpg) Dr. Strange Marvel Legendsby 1987olds442This was a fun learning experience. First off I didn't like how short the Marvel Legends Doctor Strange was, so I had make him taller. For his new wai...6 comments |
![[Judge Dredd] This was a quick little project. I'm not a huge Judge Dredd fan but I did want my Judge Dredd to be taller, so I swapped upper legs with LCBH Savage Dragon then added a little paint. Pretty simple mod, but it makes Dredd as tall as a DCUC figure.](userimages/customs/39000/38690-1.jpg) Judge Dredd | ![[Batman] This started out as a simple repair for my DCSH Batman. His right hip was stuck and snapped off, so I replaced both upper legs with a set of DCUC Superman thighs painted to match. I also repainted his face and painted all the blue parts of his costume black.](userimages/customs/39000/38652-1.jpg) Batman D.C. Universeby 1987olds442This started out as a simple repair for my DCSH Batman. His right hip was stuck and snapped off, so I replaced both upper legs with a set of DCUC Supe...6 comments |
![[New 52 Darkseid] For the recipe I used mu thanos head, applied sculpt around it. Upper body is mu thanos with wwe Brock Lesnar lower arms with sculpt also applied. Upper legs are mu thanos with attached wwe Brock Lesnar lower legs with sculpt applied to the lower boot. The boots are fully sculpted and extended to add height. His shoulder pads are sculpted and also removeable for playability purposes. So hope you enjoy, and have a good one.](userimages/customs/50000/49842-1.jpg) New 52 Darkseid | ![[Beastman] Flocking was just to give some fur sculpt to an human body, not to be perfect, just to make volume on a flat muscular figure. After all, 4 days of work, less than 20 us$, a tiny experience gain, and look at it, its even bigger than mossman!!! I like it a lot and is very poseable too. Im happy with it.](userimages/customs/50000/49729-1.jpg) Beastman |
![[War Machine Mark 2] This is a repaint of the movie iron patriot figure into the classic war machine colors! I based the color scheme off of the kotobukiya statue colors, which are a slightly more contrasty to the recent photos of the hot toys one. I dont have any added texts because I don't have the decals to make them, but I kind of prefer no text on the armors anyways. Thanks for looking!](userimages/customs/50000/49836-1.jpg) War Machine Mark 2 Marvel Legendsby spideycustomsThis is a repaint of the movie iron patriot figure into the classic war machine colors! I based the color scheme off of the kotobukiya statue colors, ...3 comments | ![[Cassios] I started by shaving off the hair, and boots with my Dremel, and cutting of his left ear.
The next step was to modify the eyes, nose, and mouth, and re-sculpting them; A new mouth with sharp teeth, a new nose and eyes/eyebrows.
After that, I sculpted the shoulder pads and made them movable , straps, belt, knee pads, leg laces, and other details with Apoxy.
The ring on the center of the chest is made out of real metal painted in aluminum.
The hair was made with hard plastic incrusted in his head covered with a layer of Apoxy, and painted in white.
The final step was to paint the eyes and mouth, the skin tone with a mix of Formula P3 paints, white for the pants, dark brown leather for the armor, and aluminum for the details.](userimages/customs/50000/49806-1.jpg) Cassios Saint Seiyaby shakaI started by shaving off the hair, and boots with my Dremel, and cutting of his left ear.
The next step was to modify the eyes, nose, and mouth, and r...3 comments on eBay Now! |
|