![[NECA Street Fighter Chun Li (Alternate Costume)] Hey realm warriors, its StreetFighterFan79 here with awesome piece. Its NECA Chun Li in her alternate costume. This custome was all NECA Chun Li except the upper arms. Those were from an Anne O'Brien figure sanded down & modded. What i did 1st was pulled the figure completely apart. Removed her buns & sculpted her hair. The ribbons are elastic bands. The torso was completely repainted in 2 different tones of blue. Now the real tricky part was the crotch area. I had 2 sand down the mid area between the legs sculpt the crotch into a "V" shaped crotch like a G.I. Joe action figure. In the back i added sculpt to her buttocks. I also sanded down the boots & resculpt the shoes. The laces were made of very small rubber pieces found in elastic bands. The spiked braclets were removed & replaced w/ again elastic band w/ sculpt. This piece was very tough but I was willing 2 get it dine just to show u all it was actually possible 2 create this custom. I had loads of fun m](userimages/customs/44000/43654-1.jpg) NECA Street Fighter Chun Li (Alternate Costume) | ![[Street Fighter Ryu] Hey guys StreetFighterFan79 here w/ simple custom. Its NECA Ryu w/ an interchangeable head. All I did was r-esculpt a NECA Ken head & modded the head so it can pop off & switch it to the NECA Street Fighter 4 Ryu head. Since this figure was a Survival Mode Ryu, the gi had to be repainted from black to white which was a pain but it was done. Also the lower part of the pants were cut to give the figure the ripped pants look. A very simple custom. Thank for looking & God bless.](userimages/customs/43500/43499-1.jpg) Street Fighter Ryu |
![[Assassin's Creed - Female Black Master] I am really tired right now, so I'll just submit these and fall into a coma.
C.Viper body again, this time for a female master assassin inspired by the Assassin's Creed series.
Comes with two swords, two hidden daggers, two capes, and a display stand.
I forgot to mention, the white version also comes with a crossbow.
The hidden dagger holds on with magnets and I've sewn the entire outfit from scratch.
With the hair I was going for some comic style Selina Kyle look.](userimages/customs/43500/43477-1.jpg) Assassin's Creed - Female Black Master Street Fighterby VincentShawI am really tired right now, so I'll just submit these and fall into a coma.
C.Viper body again, this time for a female master assassin inspired by t...13 comments | ![[El Fuerte] "Super Dynamic Cooking Time!!!", Introducing El Fuerte, an avid fan of the Rainbow Mika, He is The Rey Mysterio of the Street Fighter Universe. He made his first appearance in SF IV. I made him from a TNA Eric Young figure, shortened the lower part of the arms a bit, then modify a black vulcan head from DCUC, and voila!!!Hope you guys enjoy this one, your comments will be appreciated, thanks for visiting.
edited : I put some new pics, because I change the belt color and the buttons on el fuerte to bright yellow instead of orange.
thanks fellow realmers Kobe24 for the photos.](userimages/customs/43500/43452-1.jpg) El Fuerte Street Fighterby ToysChopShop"Super Dynamic Cooking Time!!!", Introducing El Fuerte, an avid fan of the Rainbow Mika, He is The Rey Mysterio of the Street Fighter Univer...2 comments |
![[Urien] Urien, Gill's twin brother from SF3, made him from a jakks wwe randy orton, with omega red's hands, and jazwares' guile head, the rest is sculpted. they had a prototype made 3 years ago, but i'm not confident enough to put him in the contest, so here he is. Any input will be appreciated, thanks for visiting, and don't forget to comment!!!
edit : Credit for Bee@Fuman, I copy this Urien recipe from his custom Gill figure.](userimages/customs/43500/43450-1.jpg) Urien Street Fighterby ToysChopShopUrien, Gill's twin brother from SF3, made him from a jakks wwe randy orton, with omega red's hands, and jazwares' guile head, the rest is sculpted. th...4 comments | ![[NECA Street Fighter Evil Ryu V3] Yo guys & gals. StreetFighterFan79 is back & I'm consumed by the Dark Hadou!!!!!! Its my 3rd vdrsion of Evil Ryu. This custom was inspired off a video i googled frm Capcom VS SNK 2. So i decided 2 create another Evil Ryu. Here's the breakdown:
Head: NECA Ken (hair sculpt)
Bandana: Elastic band (painted)
Gei: Capcom VS SNK Akuma
Belt: Elastic band
Legs & Feet: NECA Ken (lower pants modified)
His skin was first painted in brown, then dry brushed w/ 2 different flesh tones which gives him the gritty look. The gi was painted in black, and dry brushed in 2 tones of blue. The kanji was painted in. Thanks for looking. Comments r always welcome. God bless.](userimages/customs/43500/43286-1.jpg) NECA Street Fighter Evil Ryu V3 |
![[Guile Custom Statue] Custom Guile Statue
Based on the inspiration of Guile from Street Fighter 4, agrecividad detail and realism, to create a toy in a real collector's item](userimages/customs/43500/43158-1.jpg) Guile Custom Statue Street Fighterby chief34Custom Guile Statue
Based on the inspiration of Guile from Street Fighter 4, agrecividad detail and realism, to create a toy in a real collector's i...4 comments | ![[Street Fighter 4 NECA Version Fei Long] Wassup Realmers. StreetFighterFan79 is back w/ a simple but fun custom. NECA version of Super Street Fighter 4 Fei Long. Much bulkier version than his SOTA counterpart. He was very easy 2 do. Heres the break down:
Head: NECA Ken w/ sculpt (hair & mouth)
Arms: NECA Guile
Torso: NECA Ken
Legs: NECA Guile
Shoes: WWE Wrestler w/ alterations
Fei Long comes w/ 4 sets of interchangeable hands & a pair of nunchuckus just like his SOTA counterpart. Hope u guys like this custom. I have many more on the way. Thanks, God bless & comments r always welcome.](userimages/customs/43500/43076-1.jpg) Street Fighter 4 NECA Version Fei Long |
![[Sagat] From the original 1987 Street Fighter arcade game comes Sagat. Sagat served as the game's final boss, and was a wee bit different from the incarnation many know him best for today - most noticeably, he doesn't have that gnarly chest scar, as it is given to him by Ryu at the conclusion of the match seen in the game.
First thing I did was shave the scar off. Then, since he's a fair amount paler in SF1 than his later appearances, I repainted him all over, also giving him the gray wraps and purple trunks with white stripe he wears in the sprite.](userimages/customs/43500/43043-1.jpg) Sagat Street Fighterby ninjinisterFrom the original 1987 Street Fighter arcade game comes Sagat. Sagat served as the game's final boss, and was a wee bit different from the incarnation...1 comments | ![[Guy] For this figure, I decided to take two Fei Long figures, cut the shoulders/arms off of each and reassemble them to make one whole figure to have broader shoulders than the original (since Guy is much bigger than Fei Long). Next, I re-sculpted the entire torso to make it actually look like Guy instead of Fei Long wearing Guy's clothes. I cut off Fei Long's ankles and feet and replaced them with Anne O'Brien's. I then sculpted the ankle wraps, waist wraps, and the forearm wraps and gloves. I also took Fei long's hair off and sculpted Guy's from scratch. In order to give Guy his iconic hand pose, I cut off one of Fei Long's middle fingers and connected it to the Fei Long hand with just the index finger. He maintains all of Fei Long's original articulation except for the ankle swivel. After a fresh paint job, Guy was done. This isn't the best constructed description, but hopefully all the information comes across well enough. Thanks for looking!](userimages/customs/43000/42905-1.jpg) Guy |
![[Ares] I thought I would take a different approach at making an ares figure. I started out just messing around and ended up sanding some parts down, sculpting a lot of epoxy and making him some weapons from some old paint brush sticks and epoxy as well.. This was personally one of the funnest ones ive made so far and will be doing another one from a different recipe pretty soon as well.](userimages/customs/43000/42791-1.jpg) Ares Street Fighterby beeek0I thought I would take a different approach at making an ares figure. I started out just messing around and ended up sanding some parts down, sculptin...4 comments | ![[HUGO (Street Fighter)] Hey everyone! SO did this guy for a friend at my local Comic Store. Never heard of this guy before he told me about him, but after googleing him and reading everything and looking at all his pics I am pretty familiar with him now. My friend requested that this guy be HUGE!!!! So this is why I chose to go with the Marvel Select Hulk, re-sculpted a marvel legends Hulk head, Sculpted some pants on him, sculpted the wrist bands, the tank top, belt and shoes. Gave him a paint job which I had to go out and buy some pinks (never thought I would use that color) but after looking at different photos he had some Purples and pinks and there we have it. As always appreciate any comments or advice! Thanks everyone.](userimages/customs/42000/41943-1.jpg) HUGO (Street Fighter) |
![[NECA Street Fighter Akuma] What up Realm warriors. Im back w/ a remake of NECA Steet Fighters. Here we have our Master of the Fist, AKUMA!!!! The NECA version of Akuma was in my opinion was done all wrong. Paint job on tne gei, no "ten" symbol on his back....like the loom of the figure but it couldve been done better, so what I did was did sum modifications 2 one of my favorite fighters. Heres the run down:
Head: NECA Akuma (obviously)
Pony Tail: SOTA Revolutions Akuma
Prayer Beads: SOTA Akuma
Arms: NECA Guile
Fist (x4): Capcom vs SNK's Akuma (modified)
The forearms (gloves) were sculpted to give Akuma his ol skool Street Fighter 2/ 3rd Strike look. The custom pants were cut to give it the rugged ridge look. The sandals were attached together @ the front of the foot so that when you lift the front part of the foot, all the sandal doesn't move w/ the entire foot, just the front part. Kind of a nice feature I added, and he can stand perfectly even on his tip toes. I gave him a major repaint. Painting](userimages/customs/42000/41631-1.jpg) NECA Street Fighter Akuma | ![[Abel-Street Fighter IV] A fail creation that supposed to be M. Bison replacement body, found and train by Charlie, Abel choose to live his life to seek revenge and find a truth about himself . Made from Palisades SF Charlie's head and ML Hasbro Hercules body. Sculpt the details and then paint it with acrylic paint (brush and airbrush).
Fell free to add any comments.
Thanks](userimages/customs/42000/41549-1.jpg) Abel-Street Fighter IV Street Fighterby adi.bataraA fail creation that supposed to be M. Bison replacement body, found and train by Charlie, Abel choose to live his life to seek revenge and find a tru...12 comments |
![[Akuma] My custom Akuma using Sota figure for base. After seeing the Play Arts Akuma it inspired me to make a 6" Akuma with a same type of details.
Full body re-sculpted, the whole uniform are sculpted on, added wrinkles and texture. I made the shoulder joint wider, extended the leg to make him taller. I sculpted in the way that it wouldn't hinder any of the articulation. Full re-paint with dark purple and light grey dry brush, gave him a dark skin tone... I tried to make him look as much like the Play Arts Akuma as I can.
Tell me what you think.](userimages/customs/41000/40999-1.jpg) Akuma Street Fighterby customfigMy custom Akuma using Sota figure for base. After seeing the Play Arts Akuma it inspired me to make a 6" Akuma with a same type of details.
Fu...10 comments | ![[Guyle] GUYLE
head-guyle
torso-guyle(other version)
arms-wwe
legs-frankenstein
swapped guyle head for another bigger
paited the arms in flesh tone to fit
and swap the legs for frank s monster...simple!](userimages/customs/41000/40997-1.jpg) Guyle Street Fighterby megatrooperGUYLE
head-guyle
torso-guyle(other version)
arms-wwe
legs-frankenstein
swapped guyle head for another bigger
paited the arms in flesh tone to fit
an...3 comments |
![[SF4 Dan] Done for a friend a long time ago (yeah, i'm uploading all my old customs:) can't really take better pics right now, you'll have to be cool with those :) though, not much news here, it's been done already, my only addition would be the sleeves and the sculpting on the face
edit: Just found some pictures i didn't even know i had!](userimages/customs/41000/40619-1.jpg) SF4 Dan Street Fighterby grungethemovieDone for a friend a long time ago (yeah, i'm uploading all my old customs:) can't really take better pics right now, you'll have to be cool with those...10 comments | ![[NECA Chun-Li MOD] I actually did this one quite a while ago, just never posted it anywhere :)
well, i don't even remember everything i did XD but the face is noticeable, right?
not very satisfied with NECA's Chun-li, made some mods, mostly to her legs to get a better silhouette
she's got enough to have a full sculpted crotch, i don't know why they chose to leave it "mechanic"
so, after the mod she still moves right
and yeah, can't leave it with a re-paint ;)
PS:ladies, sorry for the last picture, needed to show the work done :)
edit: those last 2 pics for better comparison](userimages/customs/41000/40611-1.jpg) NECA Chun-Li MOD Street Fighterby grungethemovieI actually did this one quite a while ago, just never posted it anywhere :)
well, i don't even remember everything i did XD but the face is noticeable...10 comments |
![[Guile] Spectacular and unique figure of Guile, with details based on Zbrush 3d, a perfection](userimages/customs/41000/40584-1.jpg) Guile | ![[Makoto] I thought making alpha chun li wasn't easy, then i made this one..this recipe some of this recipe has been done once before that ive seen on here in the realm, i did some things differently...for the torso and head, i used sota ibuki (feet also). The arms and legs are sota gen. the waist joint is from sota chun li ( which i have plenty of broken ones) the arms are from ML electra. aswell as the dress thing. the black belt is from a sota ken. the neck band was made from a rubberband, and sota ryu head band. sculpted hair, re-paint and she was done. let me know what you guys think!](userimages/customs/40500/40307-1.jpg) Makoto Street Fighterby crowmagnumI thought making alpha chun li wasn't easy, then i made this one..this recipe some of this recipe has been done once before that ive seen on here in t...12 comments |
![[Skullmania] U used a Marvel legends fig, not really sure which one it was, but it was perfect for the scale of the character. i used DC the question head, also scupted it alittle to give it a bald look,an air brush and it was done, easy to make thanks for looking!!](userimages/customs/40500/40245-1.jpg) Skullmania Street Fighterby crowmagnumU used a Marvel legends fig, not really sure which one it was, but it was perfect for the scale of the character. i used DC the question head, also sc...12 comments | ![[Hugo V3] Basically a re-sculpt of the v2 face and a re-paint, i wasnt happy with the original design, so i decided to re-visit it. thanks for looking!](userimages/customs/40500/40244-1.jpg) Hugo V3 Street Fighterby crowmagnumBasically a re-sculpt of the v2 face and a re-paint, i wasnt happy with the original design, so i decided to re-visit it. thanks for looking!...10 comments |
![[Trish] I wanted to show you guys my latest version of Trish. I used the Donna Troy figure from DC Universe, and I took the cape from Black Panther to make her coat. The hair is from X-23 and I took the actual sword from the Devil May Cry Dante figure. It took a lot of patience and detail to create her but I hope you think it was well worth it. Thanks for looking my fellow realmers!](userimages/customs/40500/40209-1.jpg) Trish Street Fighterby TNT CUSTOMZI wanted to show you guys my latest version of Trish. I used the Donna Troy figure from DC Universe, and I took the cape from Black Panther to make h...10 comments | ![[Chun Li] This wasn't as easy as i thought it would be. OK! to whip this together, i had to use sota chun li. I had to remove the arm joints at the shoulders and replace them with ibuki's shoulder joints, then i had to remove ibuki's elbow joints and combine them with chun li's forearm joints. this teetious process took me weeks. then i did some resculpting and re-painting and i got this one done. I thought i would be different and give her a gat!..since chun li's always packing heat in sf alpha, i used ibuki hand joint and gave it a gun.I love it! however i dont ever want to make this one again. lol..enjoy! thanks you for looking.](userimages/customs/40500/40185-1.jpg) Chun Li Street Fighterby crowmagnumThis wasn't as easy as i thought it would be. OK! to whip this together, i had to use sota chun li. I had to remove the arm joints at the shoulders an...13 comments |
![[Twelve] Hi again, this time, i made another SF3 character, Twelve, a shape shifting mutant inspired by the T-1000 from the terminator movie. He is made from an ML omega red, I lengthened the hands a bit, and re sculpt them, did some work on the face as well, and voila. Enjoy this custom, and thanks for visiting, guys. Your comments will be appreciated, cheers.](userimages/customs/40500/40109-1.jpg) Twelve Street Fighterby ToysChopShopHi again, this time, i made another SF3 character, Twelve, a shape shifting mutant inspired by the T-1000 from the terminator movie. He is made from a...11 comments | ![[Necro] Hi, fellow realmers, for my first submission, I made Necro. He is a mutant character from SF III, made from an ML omega red with heavy re sculpting here and there. The boots were a pain, but I manage to get em done, anyway, comments are welcome, thanks for visiting, guys!!!](userimages/customs/40500/40108-1.jpg) Necro Street Fighterby ToysChopShopHi, fellow realmers, for my first submission, I made Necro. He is a mutant character from SF III, made from an ML omega red with heavy re sculpting he...11 comments |
![[Kairi] Pretty much a simple design. Id like to first start out by saying this is only one of 3 street fighter EX3 character's ill be doing. I like the game, i like the characters, but they aren't apart of my misson. somebody gave me an idea about making this dude, so i went out and made it happen. I used sota ken, got one cheap!...was a hard decision but i made him my base. I also used sota adon arms, had a couple laying around. basically just repaint..beefed him up a bit on the shoulders and arms, used rubber bands for the wraps. thanks for looking!..](userimages/customs/40500/40058-1.jpg) Kairi Street Fighterby crowmagnumPretty much a simple design. Id like to first start out by saying this is only one of 3 street fighter EX3 character's ill be doing. I like the game, ...5 comments | ![[Gouken] Neca Akuma base. ML Hercules head, modified and sculpted on. The hair is ML Psylocke cut to fit at top and near the bottom so the bead could be place on. Neca Guile hands. Fairly quick custom. :)](userimages/customs/40500/40018-1.jpg) Gouken Street Fighterby DudePoolNeca Akuma base. ML Hercules head, modified and sculpted on. The hair is ML Psylocke cut to fit at top and near the bottom so the bead could be place ...3 comments |
![[El Fuerte] Lots of sculpting. Number 1 of the last 3 I believe to finish off SF 4 line. Breakdown:
Head: ML Mr. Fantastic 4 pack
Body: ML Doc Ock
Upper arms: ML Dock Ock
Lower arms: WWE Wrestler
Hands: Sota Gen alt. hands I think
Hair: Sota Akuma
Sash: ML Hand ninja
Sculpted mask (with stars). Sculpted sash around waist. Sculpted boot laces AND laces on back of mask.Stars on mask and butt were cut into existence with exacto knife. Also, sculpted extra muscle tone and bulk Doc just didn't have. Apoxy on shoulders, biceps, chest, traps, abs, lats, and back...I wanted him to have more of a buky wrestler's body. Honestly, about the thing I liked about Doc Ock as a base for him was the pants and boots. I suppose with amount of sculpting I did the base could have really been almost anyone *shruggs*
To do list: I have some WWE elbow pads I need to trim to size. For such a small detail, the hardest part on this guy was sculpting the boot laces. Thanks for looking.](userimages/customs/40000/40000-1.jpg) El Fuerte Street Fighterby humanoidLots of sculpting. Number 1 of the last 3 I believe to finish off SF 4 line. Breakdown:
Head: ML Mr. Fantastic 4 pack
Body: ML Doc Ock
Upper arms: ML...5 comments | ![[Go Hibiki] Not really a legitiment street fighter, Go Hibiki is kind of a pre-street fighter tall tale. He is Dan Hibiki's father, and the man who took sagat's eye out, which resulted in his own death. This character is also capcom's answer to Mr. karate. aimed at SNK's cold war on capcom, which ironically Dan, Go Hibiki's son, was also a victum of. But in my opinion I think he made after ole steve seagal.This verson of Go first appeared in pocket fighters. then again in mugen. I like this version, however there will be another regural version coming soon.
I made him from Sota's ryu. For the head I used sota adon, which i sculpted the mask over.The hair was sculpted and the pony tail is from Neca lara craft figure. the rest was a simple re-paint. hope you enjoyed looking. thanks!](userimages/customs/40000/39887-1.jpg) Go Hibiki Street Fighterby crowmagnumNot really a legitiment street fighter, Go Hibiki is kind of a pre-street fighter tall tale. He is Dan Hibiki's father, and the man who took sagat's e...15 comments |
|