![[Machiko Noguchi the She-Predator] Next in my series of figures from the Alien/Predator novels and comics is a custom figure of Machiko Noguchi alias Da-tou'di (Little Knife) from the original Aliens vs Predator novel and comic series and more recently Aliens vs Predator: Three World War. I made this figure using a McFarlane Spawn Tiffany figure, the head of the McFarlane Voodoo Queen and the bio mask came from the Kenner Renegade Predator. I took a little artistic freedom with her design and made her outfit somewhat of a mix of her appearance in AVP: War and AVP: Three World War. I also added a Xenomoph shield as an accessory since it was left over from the Dog Alien head I used to make Dachande's chest plate; could be considered a little homage to the Hot Toys figure of her I suppose. Painted using Citadel Paints.](userimages/customs/45500/45486-1.jpg) Machiko Noguchi the She-Predator Predatorby Drak CustomsNext in my series of figures from the Alien/Predator novels and comics is a custom figure of Machiko Noguchi alias Da-tou'di (Little Knife) from the o...10 comments | ![[Predator] Here Is My Custom Aliens vs Predator 1993 Figure
Custom Paint Job To Look Like 1987 Predator With Jungle Background From The Movie. Enjoy:)](userimages/customs/45500/45478-1.jpg) Predator Predatorby inuyasha82Here Is My Custom Aliens vs Predator 1993 Figure
Custom Paint Job To Look Like 1987 Predator With Jungle Background From The Movie. Enjoy:)...6 comments |
![[Broken Tusk Predator] A custom figure of Yeyinde, alias Dachande (Different Knife) or Broken Tusk from Alien vs Predator: Prey (eg the original AVP novel/comic). I felt this guy deserves a figure and the storyline he was featured in should have been the real AVP movie rather than the two Hollywood went with.
I used an extra NECA Masked Jungle Hunter I picked up on sale for the base of the figure. The Xenomorph skull on his chest armor was made from a broken McFarlane Dog Alien and the Burner (the gun) came from the Kenner Renegade Predator. All the rest of his gear was sculpted from Apoxie. I kept the backpack because Dachande did have one in the comic adaption, but I removed the plasmacaster as he never used one. Painted using Citadel Paints. I plan to make an optional unmasked head for this figure once I pick up another NECA Unmasked Classic Predator or Jungle Hunter.](userimages/customs/45500/45373-1.jpg) Broken Tusk Predator Predatorby Drak CustomsA custom figure of Yeyinde, alias Dachande (Different Knife) or Broken Tusk from Alien vs Predator: Prey (eg the original AVP novel/comic). I felt thi...14 comments | ![[Repainted Elder Predator] A custom repaint of Neca's Elder Predator from Predator 2. I also added a few modifications to make him more movie-accurate namely the targeting laser on his plasmacaster and the leather bands on his gauntlets. I also removed the wrist blades as he never actually had those in the film. Painted using Citadel Paints.](userimages/customs/45500/45333-1.jpg) Repainted Elder Predator Predatorby Drak CustomsA custom repaint of Neca's Elder Predator from Predator 2. I also added a few modifications to make him more movie-accurate namely the targeting laser...2 comments |
![[Zaf'el the Hybrid (UNSC Gear)] I've been wanting to make some G.I. Joe scale figures of some of my Predatorial Halo characters, so I thought I'd start with my Yautja/human hybrid, Zaf'el. This time I gave her a mixture of Yautja and Marine gear like she wore in when she worked with the UNSC.
I made this figure from a G.I. Joe Baroness and Scarlett both from the Rise of Cobra line. The other features such as her bio mask, mandibles and wrist gauntlet were sculpted from epoxy. Painted using Citadel Paints.](userimages/customs/45500/45302-1.jpg) Zaf'el the Hybrid (UNSC Gear) Predatorby Drak CustomsI've been wanting to make some G.I. Joe scale figures of some of my Predatorial Halo characters, so I thought I'd start with my Yautja/human hybrid, Z...6 comments | ![[Spearheart] A commission piece I did for my friend, Spearheart on deviantART. She wanted a custom figure of her Predator fan character, Spearheart. I really enjoyed making a custom of this character given her unique coloration and design. I made this figure from the McFarlane Classics Tiffany figure. I simply removed the head replaced it with the head of a Kenner Scavage Predator. I then cut off the original feet and added the feet of the Scavage Predator and added some extra details using Apoxie. Painted using Citadel Paints.](userimages/customs/45500/45300-1.jpg) Spearheart Predatorby Drak CustomsA commission piece I did for my friend, Spearheart on deviantART. She wanted a custom figure of her Predator fan character, Spearheart. I really enjoy...2 comments |
![[Hate Predator Custom Neca] Hi there. Here is my first custom, My Young Hate Predator. Based on one of my oc predators- nickname Hate-drawing works link-More on my Deviantart profile. If You like Predators go check it, I have more than 200 original predators.
Hope You will like this custom, It was my first :)
I am using acrylic paint, super glue and anything that will fit what I desire hehe.
Wristblades, disk blades, were made from old telephone card. Melted details on the mask with self hardening clay. All other accessories made by myself from various fodder pats and such.
Hope you like.
Comments are welcome.
Second picture(really big one) shows all aspects of this custom.](userimages/customs/45500/45298-1.jpg) Hate Predator Custom Neca Predatorby Bender1988DARTHi there. Here is my first custom, My Young Hate Predator. Based on one of my oc predators- nickname Hate-drawing works link-More on my Deviantart pro...9 comments | ![[Ancient Elder Predator] A long time ago, McFarlane released three Predator figures from the Alien Vs Predator film. These figures were very inaccurate and fragile, but have become very sought after by fans. I decided to take the liberty of updating my McFarlane Elder Predator. I repainted his armor by giving it a black wash, then dry brushing it in gunmetal. I also removed the 'chopper' blades. I painted the small bumps on his face a light grey color. That is basically it, a simple yet effective couple of mods. As with my Celtic and Scar, I didn't touch the skin or netting; McFarlane does a good job at those.](userimages/customs/45500/45170-1.jpg) Ancient Elder Predator Predatorby CYCLONE_06A long time ago, McFarlane released three Predator figures from the Alien Vs Predator film. These figures were very inaccurate and fragile, but have b...9 comments |
![[Scar Predator] A long time ago, McFarlane released three Predator figures from the Alien Vs Predator film. These figures were very inaccurate and fragile, but have become very sought after by fans. I decided to take the liberty of updating my McFarlane Scar Predator. I repainted his armor by giving it a black wash, then dry brushing it in gunmetal, followed by a dry brush with silver. I painted the eye lenses on the bio a light grey like in the film. I removed the 'chopper' blades, and shortened the length of the gun arm to be more movie accurate. I also etch the 'T' symbol on his bio with a linoleum cutting knife to give it that 3d feel and texture. I left the skin and netting alone, as McFarlane did a good job with them, as opposed to NECA. Not a lot of mods, but necessary to make the figure much more accurate and have a better overall appearance. The pose is taken after he notices the human sitting still on the ground after falling down the ice tunnel. He pops his claws and slashes the gu](userimages/customs/45500/45025-1.jpg) Scar Predator Predatorby CYCLONE_06A long time ago, McFarlane released three Predator figures from the Alien Vs Predator film. These figures were very inaccurate and fragile, but have ...9 comments | ![[Celtic Predator] A long time ago, McFarlane released three Predator figures from the Alien Vs Predator film. These figures were very inaccurate and fragile, but have become very sought after by fans. I decided to take the liberty of updating my McFarlane Celtic Predator. I repainted his armor by giving it a black wash, then dry brushing it in gunmetal, followed by a dry brush with silver. I painted the eye lenses on the bio a light grey like in the film. I added the scratch / claw marks made by the 'grid' alien across his bio over his eye by using a linoleum cutting knife. I actually cut the marks into the plastic to give it that 3d feel. I used a NECA hand in place of the original left hand, which, looks like its in some kind of weird 'chopping pose.' The new hand is much better and changed the characteristic of the figure. I also removed the horribly large 'chopper' blades, and gave him accurate screen wrist blades, which were much shorter. Finally, I removed the gun arm since Celtic never g](userimages/customs/45500/45024-1.jpg) Celtic Predator Predatorby CYCLONE_06A long time ago, McFarlane released three Predator figures from the Alien Vs Predator film. These figures were very inaccurate and fragile, but have ...3 comments |
![[Wyrm Hunter] He is a dragon slayer predator. original concept by me.I used sculpeys and milliput in sculpting the armors, mask, gauntlet, and shin. for the extra weapons i modified them to fit him. he has glowing cannon. the green pred is a custom too.](userimages/customs/45000/44942-1.jpg) Wyrm Hunter Predatorby botmanHe is a dragon slayer predator. original concept by me.I used sculpeys and milliput in sculpting the armors, mask, gauntlet, and shin. for the extra w...4 comments | ![[Zaf'el the Hybrid (1/6th Scale)] A custom figure of my Predator fan character, Zaf'el the human/Yautja hybrid. I owe a huge thanks to my friend, Rachelevans1013 for giving me a lot of helpful advice for painting this figure. The figure itself was made from a Triad Toys 1/6th scale Female Otaku base, the mesh netting shirt is from a Hot Toys Machiko Noguchi figure, the mesh leggings came from a Barbie Doll that my baby cousin was no longer playing with (I switch them out, but I personally prefer the leggings over the shirt), the mandibles (which were attached using epoxy), necklace and plasma came from the McFarlane 12" Predator, I sculpted her wrist bracer (the wrist blades were from a Neca Predator) using epoxy and made her top, and loincloth. The other pieces of her armor came from several different Neca Predators and all the other parts came from various G.I. Joe figure and random fodder I found in my "For Customs Bin". Painted using Citadel Paints.](userimages/customs/45000/44890-1.jpg) Zaf'el the Hybrid (1/6th Scale) Predatorby Drak CustomsA custom figure of my Predator fan character, Zaf'el the human/Yautja hybrid. I owe a huge thanks to my friend, Rachelevans1013 for giving me a lot of...2 comments |
![[S'loss (Casual)] A custom figure of my Predator fan character, S'loss in his "Casual Attire" which is an alternate version of my other S'loss figure. I made the clothes out of white and red cloth. The Glaive was just something I had in my fodder bin.](userimages/customs/45000/44758-1.jpg) S'loss (Casual) Predatorby Drak CustomsA custom figure of my Predator fan character, S'loss in his "Casual Attire" which is an alternate version of my other S'loss figure. I made ...2 comments | ![[The Commander] He is a custom from Dark Horse Comics. All of the armor part,the extending blade and giant shuriken is made by me using sculpey, the staff is from knex.](userimages/customs/45000/44738-1.jpg) The Commander Predatorby botmanHe is a custom from Dark Horse Comics. All of the armor part,the extending blade and giant shuriken is made by me using sculpey, the staff is from kne...13 comments |
![[Dragon Samurai Predator] Made this figure from leftover fodder parts I thought I'd never use. I didn't know what I was making exactly at first, but then I noticed I was getting a Dragon/Samurai theme. I've always liked the Hot Toys Samurai Predator, but never felt like paying $300+ dollars for it, so I'm guessing that had something to do with it.
I made this figure namely from the Neca Jungle Hunter and Wolf Predator. I sculpted the head from epoxy and added the dreads from the Neca Falconer Predator. Some of the armor came from a Knights of the Zodiac figure. The sword came from a SoulCalibur III Mitsurugi figure. All the other features were sculpted from epoxy. I sculpted it from epoxy and painted using Citadel Paints.](userimages/customs/45000/44724-1.jpg) Dragon Samurai Predator Predatorby Drak CustomsMade this figure from leftover fodder parts I thought I'd never use. I didn't know what I was making exactly at first, but then I noticed I was gettin...2 comments | ![[White Fang Clan] The main Yauta clan in my Predator fan fiction. The dark green male is Drak'ar. The small female in red armor is a Yautja/human hybrid, Zaf'el. The one in the Xenomorph mask with the red cape is S'loss The green female is Nan-de Than-gaun. The one in gold is the Dragon Samurai Predator. The female with a horn headdress and voodoo-like appearance is Thei-de Bhu'ja. I have added a few accessories to the figures since I posted some of them. These include some spare parts I had left over from some other customs, some trophy skulls from NECA figures and some Halloween decorations I modified into trophy skull decor.
The third photo shows the custom trophy display I made for them. The Alien Warrior skull came from the NECA Alien vs Predator two-pack, the Berserker Predator head came from the Predator 2/Predators two-pack, I made the Alien Queen skull from a broken McFarlane Alien Queen figure's headsculpt, the T-X skull came from a McFarlane T-X figure, the Soul Edge sword came from a SoulCa](userimages/customs/45000/44721-1.jpg) White Fang Clan Predatorby Drak CustomsThe main Yauta clan in my Predator fan fiction. The dark green male is Drak'ar. The small female in red armor is a Yautja/human hybrid, Zaf'el. The on...0 comments |
![[Nulex] Zel'no'di's polar opposite in both personality and in color scheme, Nulex is one of the Antagonists of Predatorial Halo.
A simple repaint of a Battle Damaged Jungle Hunter, not much was done besides repainting although the teeth design was a doozy to paint on. I used a toothpick just to have them painted on the bio mask. XD Anyways, thanks to DrakCustoms, I'll soon be able to replace the mask with a non battle damaged bio mask. (His mask is never actually damaged like this)](userimages/customs/45000/44694-1.jpg) Nulex Predatorby Zel'no'diZel'no'di's polar opposite in both personality and in color scheme, Nulex is one of the Antagonists of Predatorial Halo.
A simple repaint of a Battle...3 comments | ![[Kree-Klii] A custom figure of My Predator fan character, Kree-Klii (also known as the Hellion Predator) in his Heavy Armor. I made this figure using parts from a NECA Berserker Predator (the head and left hand), the NECA Falconer Predator (body), the NECA Classic Predator (right arm, left shoulder armor and the wire in his mask) and the McFarlane Predator 2 figure (chest armor, smart disk and smart disc holster). The wrist blade came from the NECA Falconer Predator falcon and the sword was just a fodder part I had laying around. I sculpted some of the features on his mask such as the horns using epoxy. Painted using Citadel Paints.](userimages/customs/45000/44676-1.jpg) Kree-Klii Predatorby Drak CustomsA custom figure of My Predator fan character, Kree-Klii (also known as the Hellion Predator) in his Heavy Armor. I made this figure using parts from a...2 comments |
![[Zel'no'di] Zel'no'di, my main fan character/ Original character, is my most often updated Yautja (Predator) figure I have. As soon as I get something that would make a good decoration or accessory, I usually update it. So look forward to seeing more updates other than this version of him. Anywho, onto the description.
I used a NECA AVP: Requiem Wolf Predator as the Base figure. I started out by recoloring the armor a long time ago. Ever since it was just a recolor, I added on things such as the Beserker Predator's Plasma Caster and colored it red. I've also added a Halo Elite Skull to the back as a trophy, as seen in my AVP/Halo crossover, Predatorial Halo. I recently added a Elite's helmet and modified it to fit his shoulder as a piece of armor. Taking the Combi-stick, I simply repainted it to match Zel'no'di's red and black color scheme. I plan on adding a cape as he is the King Predator in my fanfics, so it symbolizes royalty. In the past, I had him wear a skull net with skulls of a human, G](userimages/customs/45000/44667-1.jpg) Zel'no'di Predatorby Zel'no'diZel'no'di, my main fan character/ Original character, is my most often updated Yautja (Predator) figure I have. As soon as I get something that would ...6 comments | ![[Thei-De Bhu'ja] A custom figure of my Predator fan character, Thei-de Bhu'ja (Death Specter) in her ritual gear. I made this figure using the McFarlane Voodoo Queen figure as the base. The head came from the Kenner Warrior Predator. I do wish the head wasn't so bulky though, but then again it reminds me of a Super Predator. The cybernetic hand came from a McFarlane Terminator 3 T-X figure. I sculpted the scythe myself using Epoxy (the shrunken head trophies on it came from the Voodoo Queen figure).
Since the Voodoo Queen already had some human blood splatter on her, I decided to add some Yautjan blood which made have a glow-in-the-dark effect using some glow-in-the-dark paint. Painted using Citadel Paints.](userimages/customs/45000/44665-1.jpg) Thei-De Bhu'ja Predatorby Drak CustomsA custom figure of my Predator fan character, Thei-de Bhu'ja (Death Specter) in her ritual gear. I made this figure using the McFarlane Voodoo Queen f...4 comments |
![[Samurai Predator] This is my first custom and i am pretty proud of it...I was inspired by a few custom Samurai predators made on this
site and my predators back story is basically he was a soldier but then he worked his rank up to the high council...
He was made with a few things i found laying around basically.
Thanks](userimages/customs/45000/44638-1.jpg) Samurai Predator Predatorby NinjaPred1This is my first custom and i am pretty proud of it...I was inspired by a few custom Samurai predators made on this
site and my predators back story ...7 comments | ![[Zaf'el the Hybrid] A custom figure of Predator fan character, Zaf'el the human/Yautja hybrid in her full Yautja gear. I made this figure using the body of the NECA Falconer Predator and some parts from the NECA Jungle Hunter for the most part. Her wrist blades came from the McFarlane Celtic Predator, her bio mask wires were made from some earphone wires and a sword and sheath from a SoulCalibur III Mitsurugi figure. The ponytail came from some leftover fodder parts. I decided to give most of her armor a damaged/worn look since it has seen quite a lot of use in combat. Painted using Citadel Paints.](userimages/customs/45000/44603-1.jpg) Zaf'el the Hybrid Predatorby Drak CustomsA custom figure of Predator fan character, Zaf'el the human/Yautja hybrid in her full Yautja gear. I made this figure using the body of the NECA Falco...6 comments |
![[Drak'ar] A custom figure of my Predator fan character, Drak'ar. I made this figure using a mix of parts from the Neca Wolf Predator and the Neca Classic Predator figures. Also made some modifications to the head sculpt. The skeleton trophies were made from some Halloween decorations and the bio mask on his belt (which is only for show, sadly) is a repainted mask from a Kenner Predator figure. The combi stick came from the Neca Predator 2 City Hunter and the sword was just a random fodder part I found. Painted using Citadel Paints.](userimages/customs/45000/44602-1.jpg) Drak'ar Predatorby Drak CustomsA custom figure of my Predator fan character, Drak'ar. I made this figure using a mix of parts from the Neca Wolf Predator and the Neca Classic Predat...4 comments | ![[Nan-De than-Gaun] A custom figure of a female Predator character my sister and I came up with by the name of Nan-de Than-gaun (The Kiss of Midnight). I made this using a McFarlane Belit figure (from Conan) for the body and a Kenner Savage Predator for the head. The glaive came from the Warrior Predator which was also from Kenner. Some of her features such as her neckband (which is barely visible) and the claws on her ankles were sculpted from epoxy. Painted using Citadel Paints.](userimages/customs/45000/44558-1.jpg) Nan-De than-Gaun Predatorby Drak CustomsA custom figure of a female Predator character my sister and I came up with by the name of Nan-de Than-gaun (The Kiss of Midnight). I made this using ...9 comments |
![[Predator] predator. this figure is a curious mixture of ingenuity and creativity. I had a friend a gift neca predator parts, after thinking like me figure it occurred to me that:
body: the spectacular spiderman lizard
hands and legs: neca predator
Armor: pieces of various shapes
head. fully sculpted
Paint: enamel and acrylic paint](userimages/customs/45000/44552-1.jpg) Predator Predatorby jheovannypredator. this figure is a curious mixture of ingenuity and creativity. I had a friend a gift neca predator parts, after thinking like me figure it oc...2 comments | ![[Custom NECA Mandarin 'CYCLONUS' Predator] This Predator was created to represent my name... CYCLONE... but in Predator form. The idea behind him was that he would be an Ancient, one of the original Predators that developed the honor system, and rules of the hunt.
He did most of his hunting in ancient china mostly using bladed weapons in favor of the shoulder cannon, due to it being more challenging and fair to the less technological prey.
During one of his hunts, he came about a demon (Mandarin Spawn) that was killing all of his formidable prey using powers that were unknown to him, as well as his prey. He stalked the demon, observing it's moves, techniques, and powers. He finally decided to challenge the Demon one on one, hand to hand...
After claiming his trophy, he kept some of the demon's armor and weapons as a sign of respect and honor.
The base figure was a NECA Stalker Predator. The head is from a NECA Elder Predator. The armor is from a classic Predator, with parts from a Mandarin Spawn figure. A lot of dre](userimages/customs/44500/44197-1.jpg) Custom NECA Mandarin 'CYCLONUS' Predator Predatorby CYCLONE_06This Predator was created to represent my name... CYCLONE... but in Predator form. The idea behind him was that he would be an Ancient, one of the or...10 comments |
![[Dillon - PREDATOR] This is Dillon from PREDATOR, played by Carl Weathers. This was made to look NECA Authentic in order to fit in with other Predator figures. After creating 3 Dutch Figures, I figured I do another major character, DILLON! He played an awesome role, and he definitely deserves a figure.
So here's what went down.The whole body is from NECA's Apollo Creed figure, as well as the head. Obviously major modifications were made. I created pants, the vest, gloved-hands, the famous hat, and shoes. No other figure parts were made with this figure. The base was made from scratch using clay. Then I repainted the whole figure.
Hope you PREDATOR fans appreciate this guy! Please check out my other Dutch custom figures!!](userimages/customs/44000/43852-1.jpg) Dillon - PREDATOR Predatorby EgrkaThis is Dillon from PREDATOR, played by Carl Weathers. This was made to look NECA Authentic in order to fit in with other Predator figures. After crea...16 comments | ![[Agent Dillon (Predator)] Hi all!
Up here is my next Predator figure - Dillon
I have been wanting to make this after finishing my Dutch fig, and am planning to do the whole team eventually.
Similar recipe to my Dutch
Legs - Guile
Body - Random WWE figure
Head - Neca Apollo Creed
Gun - Al Simmons
I'm pretty pleased hoe he turned out.
Just for fun i made a severed arm that can be popped on for an alternative display mode!
Hope you like, thanks for looking and any comments are welcome.](userimages/customs/44000/43695-1.jpg) Agent Dillon (Predator) Predatorby dandareHi all!
Up here is my next Predator figure - Dillon
I have been wanting to make this after finishing my Dutch fig, and am planning to do the whole t...36 comments |
![[War Predator - the Red Horseman] Custom War Predator - The Red Horseman.
I feel like I need to step up my game, so I started customizing Hot Toys. This is my own concept design of the War Predator.
For more pictures, you already know where to look... Facebook just look up Customfig.
The War Predator Sixth Scale Figure features:
Detailed concept design of the Red Horseman Predator
Realistic and detail 1/6th scale of 14 inches / 35 cm tall
Over 22 points of articulations
Newly sculpted and painted head and body armor
Interchangeable open mandibles
Two (2) pairs of interchangeable palms including:
One (1) pair of fists
One (1) pair of relaxed palms
Each head sculpt is specially hand-painted
Custom design Bio Mask
Articulated shoulder cannon
One (1) custom unique metal chain design weapon
One (1) custom blade
Faux-leather kilt, straps and real custom cloth
One (1) pair of forearm armor, including one Predalien head
one (1) Custom made hammer with blood detail made out of real rock
One (1) bone trophy
One (1) Custom Spe](userimages/customs/43500/43438-1.jpg) War Predator - the Red Horseman Predatorby customfigCustom War Predator - The Red Horseman.
I feel like I need to step up my game, so I started customizing Hot Toys. This is my own concept design of th...8 comments | ![[Alien Queen Hunter Predator with Trophies Set] This was a labor of love, so i as thinking what a predator who hunted alien queens would look like and cam up with the basic looks of the predator figure, but after i made it i decided that it would need a trophy of its kill and i began on making the skull and base. the skull is sculpted out of sculpy then given multiple paint applications to give it an older aged look, like it had been on display for a while. the human skulls were given a similar treatment, but not as elaborate, the focus was on the queens skull predominately. i also tweaked the mask i had made earlier for the predator and gave him a large spear like weapon which i call the "queen killer". the stand was made to look like it would fit in with the predator trophy room.
i hope you all like it!](userimages/customs/43500/43303-1.jpg) Alien Queen Hunter Predator with Trophies Set Predatorby SabretoothThis was a labor of love, so i as thinking what a predator who hunted alien queens would look like and cam up with the basic looks of the predator fig...10 comments |
|