![[Dark Spider-Man (Ai Apaec)] I used a Big Time Spider-Man and added Constrictor arms and Angel arms. I drilled peg holes and all arms except one have full articulation. Feels good to do this custom cause it looks badass and is one of my favorite customs.](userimages/customs/43000/42722-1.jpg) Dark Spider-Man (Ai Apaec) Marvel Legendsby masterpieceI used a Big Time Spider-Man and added Constrictor arms and Angel arms. I drilled peg holes and all arms except one have full articulation. Feels goo...10 comments | ![[Composite Hulk] A repaint of Planet Hulk and sculpted head from Terrax baf. It was a reques for a friend.](userimages/customs/43000/42595-1.jpg) Composite Hulk |
![[Zombie Iron Man] I used Avengers Iron Man as the base figure. I carved out head and sculpted skull. Cracked it open and sculpted spine, ribs, and intestines in the lower abdomen then carved out a cavity to make it visible. Added wires to give it more detail. Carved out left hand to and left foot. Carved out all wounds and sculpted the detail. This is part of the Zombie Avengers series im doing for a local collectibles store owner.](userimages/customs/42500/42466-1.jpg) Zombie Iron Man Marvel Legendsby masterpieceI used Avengers Iron Man as the base figure. I carved out head and sculpted skull. Cracked it open and sculpted spine, ribs, and intestines in the low...5 comments | ![[Red Hulk] I used arms, torso, and legs from Avengers Hulk and the left over abfomen from Planet Hulk fig. I used an extra Red Hulk baf head and finished it off with the paint job. I want to trade this badboy or sell it anyone interested let me know.](userimages/customs/42500/42397-1.jpg) Red Hulk Marvel Legendsby masterpieceI used arms, torso, and legs from Avengers Hulk and the left over abfomen from Planet Hulk fig. I used an extra Red Hulk baf head and finished it off ...6 comments |
![[Dark Avengers Venom] I used Planet Hulk's Arms, torso, and legs. I craked it open and inserted Avengers movie Hulk's abdomen to add height to the fig. I used Mac Gargan Venom's head. Finished it off with a crisp paint job and added the three Venom swirls from a Venom base from one of the earlier Spiderman classic series.](userimages/customs/42500/42384-1.jpg) Dark Avengers Venom Marvel Legendsby masterpieceI used Planet Hulk's Arms, torso, and legs. I craked it open and inserted Avengers movie Hulk's abdomen to add height to the fig. I used Mac Gargan Ve...10 comments | ![[Giant Man] I got commissioned to do a repaint on the classic toybiz Goliath. He wanted a variety of Antman/Giant Man sizes.](userimages/customs/42500/42242-1.jpg) Giant Man |
![[Zombie Captain America] Used the movie Cap as the base. I carved out all the wounds on the body and sculpted the bones and guts. I cut off the top of the head and carved out the eye socket to have the exposed skull. For the jaw i carved out the mouth and sculpted the teeth and used hot glue to add detail for tendons and ligaments in place for the jaw being ripped off.](userimages/customs/42500/42140-1.jpg) Zombie Captain America Marvel Legendsby masterpieceUsed the movie Cap as the base. I carved out all the wounds on the body and sculpted the bones and guts. I cut off the top of the head and carved out ...1 comments | ![[Zombie Hulk] This is a commissioned figure i did for a local toy shop owner hell put it up on ebay later this week. Did a lot of carving some minor sculpting. And fodder for the bones.](userimages/customs/42000/41956-1.jpg) Zombie Hulk Marvel Legendsby masterpieceThis is a commissioned figure i did for a local toy shop owner hell put it up on ebay later this week. Did a lot of carving some minor sculpting. And ...3 comments |
![[The Wizard] I used an XMC Magneto as the base and an extra Forge head. I sculpted the helmut using a random helmut as the base. Just added another villain to my Masters of Evil group.](userimages/customs/42000/41845-1.jpg) The Wizard Marvel Legendsby masterpieceI used an XMC Magneto as the base and an extra Forge head. I sculpted the helmut using a random helmut as the base. Just added another villain to my ...6 comments | ![[The Guardsman] I used a ML Magneto body and random boots from the fodder bin. I sculpted the head. I gave it the classic paint job and went over the green with a silver wash to give the color a metallic effect.](userimages/customs/42000/41837-1.jpg) The Guardsman Marvel Legendsby masterpieceI used a ML Magneto body and random boots from the fodder bin. I sculpted the head. I gave it the classic paint job and went over the green with a sil...2 comments |
![[Skaar] This is my second Skaar custom as the first was for a friend this is for my collection. The original Skaar is too small in scale compared to my FO Hulk. I used an Avengers Hulk my friend had givien to me after he received it all sharpied up I sculpted a new chin, cheeck bones, brows and cut up two random hair pieces to make his hair. I used a cape for his drapery around his waist and used a thin rubber for the straps all over the body. Used the armor of a Halo brute figure. Made the sword using a thin plastic and fodder. I kind of used my own design using different references to capture Skaars esscence.](userimages/customs/42000/41754-1.jpg) Skaar Marvel Legendsby masterpieceThis is my second Skaar custom as the first was for a friend this is for my collection. The original Skaar is too small in scale compared to my FO Hul...5 comments | ![[Skaar Son of Hulk] Did this custom for a friend he wanted it to resemble HML Skaar fig. Used War Hulk for base. I sculpted the boots and metal plates around the body. Used somr rubber for the straps around the waist and arms. Used a Terrax baf head modified it and sculpted on the face and hair.](userimages/customs/41500/41388-1.jpg) Skaar Son of Hulk Marvel Legendsby masterpieceDid this custom for a friend he wanted it to resemble HML Skaar fig. Used War Hulk for base. I sculpted the boots and metal plates around the body. Us...11 comments |
![[MS Thing] Did an easy repaint for a friend to match the Ronan baf Fantastic Four.](userimages/customs/41500/41325-1.jpg) MS Thing | ![[Red Hulk] I was looking for a Hulk figure for the base for so long. I could never get an Avengers studio Hulk cause of all these greedy ppl and scalpers. We all know what that Hulk fig cost at WalMart yet traders here still want an arm and a leg while complaining about scalpers them selfs. I didnt want to use a WW Hulk fig cause its too small compared to my f/o Hulk. My ideal fig was another f/o Hulk to use for this custom and I almost got a chance to get one but somebody wanted to trade it for my Crossbones, hell naw. Because I waited patiently I ended up with one thanx to my friend. I modified the head by trimming down the hair then I sculpted the brow and forehead and sculpted his spikey hair. I finished it off with Rulks paint job and went in with a black wash to enhance the detail.](userimages/customs/41500/41317-1.jpg) Red Hulk Marvel Legendsby masterpieceI was looking for a Hulk figure for the base for so long. I could never get an Avengers studio Hulk cause of all these greedy ppl and scalpers. We all...3 comments |
![[Luke Cage] Had a second Drax w/o the head which I used for my Warpath custom. I used a ML Cage head which I modified and sculpted a bit and added Blade's sunglasses. I did a quick repaint on the body and used Cage's chain belt.](userimages/customs/41500/41263-1.jpg) Luke Cage Marvel Legendsby masterpieceHad a second Drax w/o the head which I used for my Warpath custom. I used a ML Cage head which I modified and sculpted a bit and added Blade's sunglas...1 comments | ![[Kang] I don't own a Kang figure so I just work with what I got and usually make one. I had an extra Drax lying around so I just went for it. I sculpted a lot of the drapery and helmet over Drax's head. I layed down the paint and gave the fig a silver wash to give the paint a metallic finish.](userimages/customs/41500/41237-1.jpg) Kang Marvel Legendsby masterpieceI don't own a Kang figure so I just work with what I got and usually make one. I had an extra Drax lying around so I just went for it. I sculpted a lo...7 comments |
![[Nemesis (Holocaust)] My plan was if I couldn't make one then id probably would of bought one. I used a Buzzing Beetle I opened it up and removed all the electrical parts out including the head and neck. I then shaved off plastic around the neck hole to insert a plastic head dome that came with a Toybiz Space Suit Cable. I used a ROHML Ghost Rider head. I removed the flame and inserted into the dome which fits perfectly inside. I then sculpted the shoulder pads, left arm blaster, and details on the chest. I base coated the entire figure with a satin black. Then I added yellow and red in the entire body. Finished it off with gold and added a black wash to enhance the details.](userimages/customs/41500/41143-1.jpg) Nemesis (Holocaust) Marvel Legendsby masterpieceMy plan was if I couldn't make one then id probably would of bought one. I used a Buzzing Beetle I opened it up and removed all the electrical parts o...7 comments | ![[Baron Helmut Zemo] Used Cyclops as base fig. I sculpted the head, fur, and belt. Painted tje body black and have the his chest and head a dark purple. Gave the fogure a silver dry brush.](userimages/customs/41500/41068-1.jpg) Baron Helmut Zemo Marvel Legendsby masterpieceUsed Cyclops as base fig. I sculpted the head, fur, and belt. Painted tje body black and have the his chest and head a dark purple. Gave the fogure a ...4 comments |
![[Absorbing Man] Been wanting to buy thw FFF Absorbing Man and I finallly saw one in person but it was too small. I had an extra Maestro and I decided to use it as the base fig. I trimmed the the hair and beard down from the head, then I sculpted it to resemble A.M. I sculpted detail to the left arm and then finished it off with the paint job. I went for the orange pants with Hulk right arm and metal on the left.](userimages/customs/41000/40937-1.jpg) Absorbing Man Marvel Legendsby masterpieceBeen wanting to buy thw FFF Absorbing Man and I finallly saw one in person but it was too small. I had an extra Maestro and I decided to use it as the...5 comments | ![[Maria Hill and Sharon Carter] Had two extra Madame Hydra figs so did an easy repaint. Homeboy hooked it up with an extra Maria Hill and Sharon Carter head. Saved a lot of cash on not having to buy both TRU two packs.](userimages/customs/41000/40870-1.jpg) Maria Hill and Sharon Carter Marvel Legendsby masterpieceHad two extra Madame Hydra figs so did an easy repaint. Homeboy hooked it up with an extra Maria Hill and Sharon Carter head. Saved a lot of cash on n...4 comments |
![[Bloodaxe] I was inspired by Loosecollectors design of Bloodaxe so I gave it a shot. I didnt know his recipe I just used what I had. I had an extra Thing that I used as the base. I sculpted the clothing on the whole body. I sculpted the head, and every other details on the fig. I used Planet Hulks armor and a random axe from the fodder bin. Added a real chain from some random cheap pocket watch. Im satisfied with the way it came out. It always awesome to at a villain to my collection, especially when its this huge.](userimages/customs/41000/40588-1.jpg) Bloodaxe Marvel Legendsby masterpieceI was inspired by Loosecollectors design of Bloodaxe so I gave it a shot. I didnt know his recipe I just used what I had. I had an extra Thing that I ...1 comments | ![[Mephisto] Been wanting to do this character for awhile. Used a MS Cyclops as the base fig. I used a SMC Green Goblin head and sculpted a bigger forehead and the hair. I used a thin rubber for the collar and loin cloth. Added Mystiques skulls to add more evil to the fig. For the cape I saw and bought these awesome looking wings at a local flea market. I symetricaly put the wings together and mounted them on the figure with clear rubber bands. My Mephisto has a more unique look and feel to it and has become one of my favorite customs.](userimages/customs/40500/40478-1.jpg) Mephisto Marvel Legendsby masterpieceBeen wanting to do this character for awhile. Used a MS Cyclops as the base fig. I used a SMC Green Goblin head and sculpted a bigger forehead and the...7 comments |
![[Ares] If you cant buy one just make one, thats my motto. I just had to figure out a way to make one. I used Omega-Red as the base figure and swaped out the boots for those of an XMC Juggernaut which I had dremeled the foot smooth. I used thin strips of rubber for the straps around the arms and abdomen. I sculpted a helmet onto the head which I dont mind that its not removable. I also sculpted the spikes on the boots, the belt buckle and his sword. I added rubber and extra fodder for the armor and belt. Finally I made an Ares for my ever expanding collection.](userimages/customs/40500/40436-1.jpg) Ares Marvel Legendsby masterpieceIf you cant buy one just make one, thats my motto. I just had to figure out a way to make one. I used Omega-Red as the base figure and swaped out the ...2 comments | ![[Toad] Seen ppl use Banshee for Toad customs, so why not. I dont have a Toad and the Legends one isnt articulated and is kind of big. So I just gave him a dirty paint job. I used a thin rubber for the cloth around his neck. Draxs belt and random fodder for the shoes.](userimages/customs/40500/40394-1.jpg) Toad Marvel Legendsby masterpieceSeen ppl use Banshee for Toad customs, so why not. I dont have a Toad and the Legends one isnt articulated and is kind of big. So I just gave him a di...3 comments |
![[Tiger Shark] Why not make one. I used a Catman as the base. I made the Shark fin on his head out of a thin plastic. The fins on his gloves are fodder from a Spider Man fig and the hands are from a stealth Venom. Just expanding my collection one figure at a time.](userimages/customs/40500/40392-1.jpg) Tiger Shark Marvel Legendsby masterpieceWhy not make one. I used a Catman as the base. I made the Shark fin on his head out of a thin plastic. The fins on his gloves are fodder from a Spider...4 comments | ![[The Prowler] I had an extra Black Panther and I always saw ppl use him as The Prowler. So why not make one for my collection.](userimages/customs/40500/40347-1.jpg) The Prowler |
![[Havok] I used DCU Captain Boomerang as the base figure. I cut the benie off his head and sculpted the hair. Trimmed the jacket added the collar with a thin ribber and used Mr. Sinisters straps for the extra details on his suit. I swapped out its original boots for a pair of extra Fantomex boots.](userimages/customs/40500/40272-1.jpg) Havok Marvel Legendsby masterpieceI used DCU Captain Boomerang as the base figure. I cut the benie off his head and sculpted the hair. Trimmed the jacket added the collar with a thin r...1 comments | ![[Bastion] I used Mr. Sinisters body but I swaped the legs with a WWE legends figure. Added a little fodder detailing to his suit and finishef it off with his classsic paint job.](userimages/customs/40500/40269-1.jpg) Bastion Marvel Legendsby masterpieceI used Mr. Sinisters body but I swaped the legs with a WWE legends figure. Added a little fodder detailing to his suit and finishef it off with his cl...6 comments |
![[Shatterstar] I used an XMC House of M Wolverine. I used a spare Angel head and Omega-Red's pony tail. XMC Juggernauts shoulder pads. I made the knee pads from a thin plastic and the drapery around the neck was made from a thin rubber. Made his swords out of thin plastic and random fodder. My X-Force team is coming along.](userimages/customs/40500/40152-1.jpg) Shatterstar Marvel Legendsby masterpieceI used an XMC House of M Wolverine. I used a spare Angel head and Omega-Red's pony tail. XMC Juggernauts shoulder pads. I made the knee pads from a th...9 comments | ![[Warpath] I know ill never get a Warpath fig so I made myself a classic looking one. As the base I used a WWE fig Jimmy Snuka. Swaped the legs with WWE fig Ruck Rude. I used an extra Drax the Destroyer head and I added a chopped up DCU Apache baf head's hair. I cut up a thin rubber for the straps on his shoulders and boots. Added random fodder and here is my Warpath.](userimages/customs/40500/40125-1.jpg) Warpath Marvel Legendsby masterpieceI know ill never get a Warpath fig so I made myself a classic looking one. As the base I used a WWE fig Jimmy Snuka. Swaped the legs with WWE fig Ruc...8 comments |
|