![[Sasquatch] sasquatch,repaint and small sculpting to mouth](userimages/customs/50500/50064-1.jpg) Sasquatch | ![[Superman beyond] omac figure,citadel paints](userimages/customs/50500/50063-1.jpg) Superman beyond |
![["Giganta"] For the recipe I used 12 invisible woman full body. Sculpt hair, collar, breast, zipper ring, details around the gloves and knuckles and her boots. I was a little disappointed that I was not the first to come up with this idea but I am proud of the ending execution of it. Hope you all enjoy and have a good one.](userimages/customs/50500/50062-1.jpg) "Giganta" | ![[Killer Frost] JLU version used a Star sapphire with a Sakura head for a carttony look. Bad choice for a base body since most details had to be smoothed out but the star looked like a snowflake and that part worked out.](userimages/customs/50500/50061-1.jpg) Killer Frost |
![[Pumpkinwolf] 1 Pumpkinhead figure and some creativity.This is my second Custom and im still very green!Im really into werewolves so i thought Pumpkinhead would serve as a perfect candidate for a transformation.No sketching this time just had an idea of what i wanted him to look like and began applying chunks of Aves Apoxie Sculpt to the figure.Started at the tail by clipping abit off then forming the apoxie around it.Stretched it and finger-formed it.Then i began to create its mane.Clumps of finger-formed pieces, sections at a time.Ran them down the center of its back,pressing and shaping as i went.Throughout the process,i used my fingers,a wooden shish-ka-bob stick and a dental pick.The tools were used to create fine lines in its fur.I applied pieces of sculpt to its wrists and ankles,crotch and elbows.The forming of the snout came last.The tip of the nose was one piece then the bridge came second all the while finger-forming it.The nostrils were pushed in with the the shish-ka-bob stick.A day and](userimages/customs/50500/50060-1.jpg) Pumpkinwolf | ![[Black Manta] For the recipe I used mu punisher head, sculpted the helmet around it. Attached 2 elastic wire to the back and helmet glueing them to back pack and helmet. Upper torso is mu punisher with sculpt supplied to full upper body, lower and arms. Upper legs are mu punisher with sculpt applied for dual sword holsters and lower legs are from dc infinite heroes hush action figure. So hope you all enjoy and have a good one.](userimages/customs/50500/50059-1.jpg) Black Manta |
![[Doc Ock] Had the bottom of this octopus laying around and at the girlfriend house I saw a snail shell....bing the light goes off. Added the snail shell to the bottom which left a little gap in the side. I thought that looks like a mouth so I sculptd some teeth in it. So I'm back to having a cartoon style octopus...bing the light goes on again and I make and old time doctor "head mirror". There you have it Doc Ock! Made it for a friend of mine Todd (he's in the NASA shirt) who works at Acme Superstore where I get 95% of my toys, they have got to be the largest now in the South East!Comments and suggestions welcomed.](userimages/customs/50500/50057-1.jpg) Doc Ock Marvelby spider-man59Had the bottom of this octopus laying around and at the girlfriend house I saw a snail shell....bing the light goes off. Added the snail shell to the ...4 comments | ![[Nico Okarr Ver. 2 (Repaint)] This is a repaint and modified version of the first Nico Okarr I did.
I never was happy with the colours of the first one so I took some brown and did a repaint to make him more accurate. Also I cut of the collar of his coat. I didn't like the first version of the coat and I also painted it with some brown, but a little more brighter than the body of Nico. After all, I just painted the front of his shirt a more accurate to the original smuggler out of the intro.
Now, the figure is ready](userimages/customs/50500/50056-1.jpg) Nico Okarr Ver. 2 (Repaint) Star Warsby GavinThis is a repaint and modified version of the first Nico Okarr I did.
I never was happy with the colours of the first one so I took some brown and d...0 comments |
![[Jet Pack 2.0 Custom] Repainted ML Falcon figure. Sculpted helmet around the head. Used Dc universe Adam Strange.](userimages/customs/50500/50055-1.jpg) Jet Pack 2.0 Custom | ![[Luke Skywalker (in Imperial Disguise)] Hi everybody. This is my third custom. I always liked the SHADOWS OF THE EMPIRE FIGURE Luke Skywalker (In Imperial Disguise). The original was very nice but to "static" for me. I wanted to articulate him more and so I decided to do my own Luke IID. But it wasn't that easy as it looks like (paintin a figure red, give him a luke head and ready)
The first try was a new clone with a removable helmet cause the ball-jointed neck at these troopers are so small that my Luke head would fit.. with a little help of the dremel ;)
When I was done, Luke looked like an anorexic trooper. Not the result I was lookin for. I wanted a strong body so I took the body of a 212th batallion Trooper of the vintage collection and started painting again. The legs were more thicker than the other ones and the whole trooper looks like a trooper not like a skinny guy.
After painting I took the head of the Luke Skywalker Endor capture and the Shadows of the Empire Luke Skywalker was ready... almost...
Some](userimages/customs/50500/50054-1.jpg) Luke Skywalker (in Imperial Disguise) Star Warsby GavinHi everybody. This is my third custom. I always liked the SHADOWS OF THE EMPIRE FIGURE Luke Skywalker (In Imperial Disguise). The original was very ni...0 comments |
![[Iron Man Deep Sea Suit] Heroes Assembled Customs presents: Iron Man's Deep Sea armor! This suit is based on the Deep Sea armor that premiered in 1987 in Iron Man #218.
Made from an old Unreal Tournament figure, a Heroic Age IM head, and a Naut Ke Loi helmet, this figure was a TON of fun to make. The usual prep and prime work went on, then I painted the entire thing with 'mithril silver'. Tamiya 'clear red' went on next to give it that extra 'pop', as well as citadel 'burnished gold'.
The base was a ton of fun as well. It was made from a LOST figure base, two of the MS She Hulk smoke/pillar things used to hold up the car- which were then painted and hit with hot glue to make the 'bubbles'.
I had a ton of fun with the lighting in one of the pics. Hope you enjoy!](userimages/customs/50500/50053-1.jpg) Iron Man Deep Sea Suit | ![[Indiana Jones] Hi All,
I always wanted to make a Raiders Well of the Souls diorama but in 3-3/4" scale finding snakes that look good and finding a lot of them was my biggest problem so I decided to scale the dio down to a partial Well of Souls as you can see in the pics.
I have to thank inky_skin from the Raiders forum for sending me what snakes he had if he didn't I wouldn't have been able to build this partial dio THANKS BUDDY. Once the figures and dio where done they were painted and weatherd using Vallejo, GW paints and chalk pastels.
RECIPE
1: Figures - Indy and Sallah are both from Hasbro and Sallah is straight from the package, I filled the joints up using plastacine and then covered his main body with soaked tissue paper to hide the joints and to see how tissue paper would look as cloth at this scale and I was more then happy with the results.
Indy like Sallah is from Hasbro, I used KOTCS legs and torso the head is from TOD and the gloves are from the A-Teams Face figure. On](userimages/customs/50500/50052-1.jpg) Indiana Jones Indiana Jonesby HembleHi All,
I always wanted to make a Raiders Well of the Souls diorama but in 3-3/4" scale finding snakes that look good and finding a lot of them ...3 comments |
![[Man of Steel | General Zod with Ab Crunch Articula] I applied the same basic operation to this figure as I did with Superman. I didn't do all of the added articulation on this in since I wanted to get the Ab Crunch done correctly first. I can always swing back later to do that. He looks pretty good for a bad guy. All the ab crunch and lower torso is connected with a series of magnets built around a ball bearing. This allows for total added range of motion equal to the Batman Movie Masters figures.
Thanks!!!](userimages/customs/50500/50051-1.jpg) Man of Steel | General Zod with Ab Crunch Articula Movie Mastersby GeekSummitI applied the same basic operation to this figure as I did with Superman. I didn't do all of the added articulation on this in since I wanted to get ...2 comments | ![[Strider Hiryu] This figure was made from a Sota Fei Long with Ibuki legs, I sculpted the gi over the Fei Long torso, and also sculpted over the upper thighs of the Ibuki legs to smooth out the look.
Sculpted hair, sash & mask. Scarf is wired ribbon for posability, silver belt is cut from a Terrax BAF 'loin cloth'.
Hands are from a Jakks wrestler, with painted over ribbon bands on the arms. I'm particularly proud of the hand painted symbol on his chest, and the hair. I've never painted kanji or sculpted 'anime' style hair before, so this figure was a great experience for me!
Hope you like!](userimages/customs/50500/50050-1.jpg) Strider Hiryu |
![[Phalanx] Hey Realmers! For this Phalanx, I used a DC Direct Hourman for the base, a Black Mask head, CNC Anti-monitor arm and lower leg of a McFarlane Angela figure. The rest is fodder bits and Sculpey. Hope ya like!](userimages/customs/50500/50049-1.jpg) Phalanx | ![[Adam Warlock] This was a ML Adam Warlock for another's collection. I used the ML Quicksilver body and made the left hand interchangeable with the regular hand, one regular gauntlet and a jeweled version. I also made a set of Captain Marvel heads with sculpted hair and one was regular and one with the soul gem. Another set was made using the Hasbro's Warlock head and one regular and one with the soul gem. I resculpted the skull on the cape and redid the staff with a DCU Beast Boy's bird head with DCU Hawkman wings attached to the staff. It did make it look much nicer, the other staff is for comparison.
As always thanks for your views, comments and support.](userimages/customs/50500/50048-1.jpg) Adam Warlock |
![[The Huntress] This custom was made with a DCU Powergirl body with sculpted accents, ML Wasp forearms and lower legs with sculpted accents, DCD Huntress head with fodder hair and sculpted enhancements. Used pieces of the DCD Huntress and sculpted details such as the kneepads and used ML Mr. Sinister straps on the lower legs. Then fixed the hands to hold accessories. Accessories were NECA Ninja Gaiden sword/sheath with magnetic attachment, fodder crossbow with tension line for ready to fire and loose bolt (arrow can be removed also), used domino guns and holsters, Face Off Punisher boot knife/sheath and finished off with the Huntress staff of the DCD figure.
This custom was made for another friend's collection to help complete his Batman Collection. Also sorry for the pics, most of the customs have been for others so I did not take as many and this one did not get a background. As always thanks for the views, comments and support.](userimages/customs/50500/50047-1.jpg) The Huntress | ![[The ATOM II ADAM CRAY Suicide Squad] Was reading my old Suicide Squad series (Ostrander years) and came across this cool concept of the Atam Adam Cray (we all first thought he was Ray Palmer).
Body: ML Ultimate Captain America
Head: ML Remy](userimages/customs/50500/50046-1.jpg) The ATOM II ADAM CRAY Suicide Squad |
![[SENTINEL Alan Scott JSA Justice Society of America] This is my third take on this 90's cool & classic character: Alan Scott as Sentinel!
Body: BL Kyle Rayner
Head: DCUC Alan Scott
Cape: DCUC Starman with added collar](userimages/customs/50500/50045-1.jpg) SENTINEL Alan Scott JSA Justice Society of America | ![[Abe Sapien Hellboy Movie] Greetings friends, "abe sapien" is my nickname here and is one of my favorite characters from the movie "hellboy 1 & 2", so I could not miss in my collection of "customs".
Recipe:
-one chinese bootleg spiderman action figure (that turn on the light in the chest, chose that figure because apart from being cheap and had good joints lent itself to body style "abe")
-sculpted and painted: face, hands, belt and accessories
(breathing apparatus and diving lenses)
Thanks for stopping by, cheers!](userimages/customs/50500/50044-1.jpg) Abe Sapien Hellboy Movie Hellboyby abesapiensGreetings friends, "abe sapien" is my nickname here and is one of my favorite characters from the movie "hellboy 1 & 2", so I ...1 comments |
![[Rhino] Here is The rhino from a select juggernaut. I was reluctant to make this character but i was just so sick of having a puny marvel legends rhino in the shadows hulking select figures.
I started making this figure before the announcement for the select rhino.
I was enjoying the work i was putting into it but got burned out on it. I managed to get the wrist the swivel which made a big difference. I ended up scraping him when i got the new select rhino and made the triceraton figure out of him.](userimages/customs/50500/50043-1.jpg) Rhino Marvel Selectby eagle's customsHere is The rhino from a select juggernaut. I was reluctant to make this character but i was just so sick of having a puny marvel legends rhino in the...7 comments | ![[Young Justice Invasion Superboy] Since Mattel cancelled the YJ 2pack miss martian & superboy with the new costume, I decided to make one. I recast the head,resculpt the body and paint it.and it's for sale on ebay.item number 261219872412](userimages/customs/50500/50042-1.jpg) Young Justice Invasion Superboy |
![[Hulk] This was a older custom from sometime last year. Wanted to make a more articulated hulk so used none other then juggernaut base. Everything but the feet are from the select juggernaut the lower legs/feet are ms hulk. The combination of the juggernaut legs and the hulk feet blend nicely. I actually molded and cast the hulk lower legs and feet.
I never got a helmet-less juggernaut which would have been great for the head alone. but i ended up just using the face under the helmet so the more os the head is sculpted. He does have a little chubby face but its sort of a work in progress.
This is actually my first attempt and plan on revisiting the character.
A reason why I do a lot of big customs is basically practice. Larger working areas for muscle
definition. I still have a long way to go in the sculpting department but again its a great
way to learn on the larger figures.](userimages/customs/50500/50041-1.jpg) Hulk Marvel Selectby eagle's customsThis was a older custom from sometime last year. Wanted to make a more articulated hulk so used none other then juggernaut base. Everything but the fe...5 comments | ![[Meggan V4] I wanted to do a Meghan using the new body sculpt. Swapped the head with the long haired variant X-Treme Rogue (cast by Face Customs) as I wanted the smile. Hair is storm, legs are Viper and feet are Savage She Hulk. Sculpted the arm and chest detail.](userimages/customs/50500/50040-1.jpg) Meggan V4 Marvel Legendsby WingsI wanted to do a Meghan using the new body sculpt. Swapped the head with the long haired variant X-Treme Rogue (cast by Face Customs) as I wanted the ...3 comments |
![[Ms Marvel Aka Warbird] I always thought Carol needed a curvier sexier figure than the Phoenix repaint we got during Toybiz's swan song. I swapped the feet for Viper and her right hand with a 2 Pack Wolverine fist. The head is the old Toybiz Mystique. Sculpted glove cuffs, boot tops, mask and smoothed the bikini out. Hair is 100% darice foam so articulation is retained. The symbol is also darice and the belt is a mash up from Warbird and Ryu.](userimages/customs/50500/50039-1.jpg) Ms Marvel Aka Warbird Marvel Legendsby WingsI always thought Carol needed a curvier sexier figure than the Phoenix repaint we got during Toybiz's swan song. I swapped the feet for Viper and her ...6 comments | ![[New Krypton Zod] Excited for the new movie next month I made a Zod from my favorite comic story that features him, the New Krypton saga.
Strait forward recipe, I took the uniform bits from Kal-el (gun, collar, and belt buckle). Green stuff for the 'sash' and beard. Then new paint with my own 'Zod' stylized Z. Sorry for the not so good pics phone camera is all I have to work with.](userimages/customs/50500/50038-1.jpg) New Krypton Zod Supermanby Zan-elExcited for the new movie next month I made a Zod from my favorite comic story that features him, the New Krypton saga.
Strait forward recipe, I took...0 comments |
![[Alien Politician from They Live] The aliens from "They Live" have always freaked me out, and during the making of Piper form the movie I knew I had to make one of those scary bastards. The body of X was perfect beacuse of the suit, the head is sculpted form scratch. I really like the outcome and hope you do as well!](userimages/customs/50500/50037-1.jpg) Alien Politician from They Live Horrorby toyguruThe aliens from "They Live" have always freaked me out, and during the making of Piper form the movie I knew I had to make one of those scar...11 comments | ![["Nada"(Piper) from They Live] Hey friends. So one of my fav movies of all time is "They Live". So while I was digging through the toy chest I found my Roddy Piper figure and the idea came to me. The figure of the nameless one must be made. So I "kicked ass and chewed bubble gum" til I was all out and took Piper's head, Duke Nuke em's body and sculpted the shirt and added a sweet paint job. Hope you guys like him!](userimages/customs/50500/50036-1.jpg) "Nada"(Piper) from They Live Horrorby toyguruHey friends. So one of my fav movies of all time is "They Live". So while I was digging through the toy chest I found my Roddy Piper figure ...20 comments |
![[Top Knot Predator 2.0 (Dark Horse Comics)] My Top Knot was done a while back but as I've gotten a little better at painting, I wanted to paint him more like a movie style version. I personally think fixing the skin was a must do after taking part in painting the lost tribe members.
Aside from fixing his skin, I also added a McFarlane classic Predator trophy necklace, repainted his dread rings, and added a second cannon power pack on his back instead of the medi kit.
Hope you guys like him.](userimages/customs/50500/50034-1.jpg) Top Knot Predator 2.0 (Dark Horse Comics) Predatorby CYCLONE_06My Top Knot was done a while back but as I've gotten a little better at painting, I wanted to paint him more like a movie style version. I personally...4 comments | ![[Classic Lobo] Savage Dragon upper boby, Undertaker figure lower body, jacket, hair, and Hook sculpted, Bishop's belt, gun, and lower legs. I used a custom decal paper to print out the Logo....](userimages/customs/50500/50033-1.jpg) Classic Lobo DC Directby TheAVEnewyorkSavage Dragon upper boby, Undertaker figure lower body, jacket, hair, and Hook sculpted, Bishop's belt, gun, and lower legs. I used a custom decal pap...3 comments |
|