![[Naked Snake/Big Boss] Simple custom i wasnt happy with the manga style recoltech head so i took the head off UDF Snake hollowed out added a hole for the revoltech joint and swapped pretty simple and a whole lot better, thanks for looking](userimages/customs/49500/49478-1.jpg) Naked Snake/Big Boss Metal Gear Solidby RicktatorshipSimple custom i wasnt happy with the manga style recoltech head so i took the head off UDF Snake hollowed out added a hole for the revoltech joint and...2 comments | ![[Bigtocinet´S Raiden Gijoe Scale V2.0] just some details added.
enjoy it](userimages/customs/49000/48511-1.jpg) Bigtocinet´S Raiden Gijoe Scale V2.0 |
![[Bigtocinet´S GRAY FOX Gijoe Scale] hi everyone! im here with the lastest custom from the metal gear solid 3-pack.
GRAY FOX!
base body- marvel universe modular armor iron man
right hand- clone wars captain rex
head- poc beach head heavyly sculpted
sword- fodder
i hope you like it! enjoy and please comment](userimages/customs/48500/48476-1.jpg) Bigtocinet´S GRAY FOX Gijoe Scale Metal Gear Solidby bigtocinethi everyone! im here with the lastest custom from the metal gear solid 3-pack.
GRAY FOX!
base body- marvel universe modular armor iron man
right han...16 comments | ![[Bigtocinet´S MGS4 RAIDEN Gijoe Scale] hi everyone! im here with a new figure to a customer located in Barcelona.
I hope he likes it!!
There is a lot of parts here and sculpt work.
head: luke skywalker modded
body: marvel universe iron man
arms: clone wars clone trooper
legs: roc deep six
sword: roc paris pursuit snake eyes
mixed weapons: fodder
enjoy it and please comment. thank you!!](userimages/customs/48500/48397-1.jpg) Bigtocinet´S MGS4 RAIDEN Gijoe Scale Metal Gear Solidby bigtocinethi everyone! im here with a new figure to a customer located in Barcelona.
I hope he likes it!!
There is a lot of parts here and sculpt work.
head:...11 comments |
![[Cyborg Ninja] this is my first attempt at a custom action figure. i sculpted over an iron man figure using plumbers putty. sculpted all the armor pieces, gauntlets and abs onto the body. for the head i used a resin cast from angelforge but i didnt like it very much so i cut it up with an exacto knife and sanded it down to look more like the play arts kai version. for the back i sculpted over it completely then sculpted some of the vertebrae and used a cut up for sale sign for some of the smaller pieces. the hands are from a gi joe accelerator suit duke with sculpted pieces on em. the feet are from a snake eyes version 53 i think. it took a massive amount of painting, which is not my strong suit. anyhow, i hope you guys like it.](userimages/customs/48000/47955-1.jpg) Cyborg Ninja Metal Gear Solidby sithtim71this is my first attempt at a custom action figure. i sculpted over an iron man figure using plumbers putty. sculpted all the armor pieces, gauntlets ...5 comments | ![[Bigtocinet´S SOLID SNAKE] Well, another custom here!This time, my favourite character of all time in videogames! SOLID SNAKE!!
I have done some previus versions, but i think this is the final one!
I have spent a lot of time mixing parts, sculpting and painting (what a pain with paints!!)
Enjoy it! and please comment!! thanks for watching
recipe
head: indiana jones german motorbike soldier
arms: saesse tinn clone wars armored version
hands: some bbi figure
upper body: roc mars troopers
lower body: roc deep six
belt: valor vs venom cross hair (modded)
upper legs: roc duke figure
knees: roc breaker
lower legs: resolute beachhead](userimages/customs/47500/47370-1.jpg) Bigtocinet´S SOLID SNAKE Metal Gear Solidby bigtocinetWell, another custom here!This time, my favourite character of all time in videogames! SOLID SNAKE!!
I have done some previus versions, but i think t...12 comments |
![[PSYCHO MANTIS Boss 1:12th Scale] I did this custom awhile back but never uploaded it. Made using parts from spiderman forearms and hands and bullseye I think as I did it a long time ago so I am trying to remember. All the straps,etc were sculpted on. Psycho mantis from the Metal Gear Solid video game. I like the sculpt of the original action figure but not the articulation so I did this one to have full articulation.](userimages/customs/47000/46899-1.jpg) PSYCHO MANTIS Boss 1:12th Scale Metal Gear Solidby D&DCUSTOMSI did this custom awhile back but never uploaded it. Made using parts from spiderman forearms and hands and bullseye I think as I did it a long time a...14 comments | ![[Psycho Mantis (Repaint & Repair)] (i had this creepy guy made a long time ago, the only reason why i didn't upload him was that i had not made the base yet c: )
i saw mantis on sale for a good price (a price that could be considered "cheap" only here) even though he wasn't on the best condition, he had both wrists articulations broken (so both were glued)the straps from the front and the back broken and the mask missing, i didn't know that there were clear variants of some MGS figures by Mcfarlane so when i got him the next question came to my mind:
do i paint him completely? (that was the only way to make an epoxy mask without him looking bad)
or do i leave him like that?
the problem was that he looked really cool being "clear" but on the other hand without his mask the head sculpt looks really bad because the straps from the mask are sculpted on his head!
so in a metal gear induced hallucination, i realized that the best option was to paint half of him, to make him look like he was vanishing](userimages/customs/45500/45359-1.jpg) Psycho Mantis (Repaint & Repair) Metal Gear Solidby Mr.?(i had this creepy guy made a long time ago, the only reason why i didn't upload him was that i had not made the base yet c: )
i saw mantis on sale f...8 comments |
![[Snake Aka Big Boss] Head - MU Cable
Body - MU Steve Rogers](userimages/customs/45000/44950-1.jpg) Snake Aka Big Boss | ![[Solid Snake] Hello everyone, this is my version of Metal Gear Solid, Solid Snake. The hardest part about customizing is painting the figure, not only to this figure but to all my custom figures. I sculpted pretty much everything over MU punishers body to transform him into Solid Snake. Hope you'll like it.](userimages/customs/45000/44935-1.jpg) Solid Snake |
![[Grayfox] Third figure for today is Grayfox. The ninja dude from Metal Gear! He was made from the following parts:
Body - LCBH Star
Fist - Hand ninja
Trigger hand - Fury
Feet - Yellowjaket
Head - original LC sculpt
This one had a bit more work due to the armour plates on him. The head took a while to get looking "right" too. His paintjob is a more shiny smooth finish instead of our usual matte.
Hope you like him guys! God bless. -LC](userimages/customs/44500/44374-1.jpg) Grayfox | ![[Solid Snake] I took a solid snake and decided to change the articulation. When you play the game, Snake moves and ducks and crawls and does things, and I wanted to depict this in the figure. I took an X men movie character, I think it was a Cyclops and used the arms and legs. The hands are WWE mattel, and the boots are from a different cyclops figure. Took a head with some modification from a Lord of the Rings figure, and that's a wrap! Hope you like it.](userimages/customs/44500/44030-1.jpg) Solid Snake Metal Gear Solidby LuvNidlenessI took a solid snake and decided to change the articulation. When you play the game, Snake moves and ducks and crawls and does things, and I wanted to...2 comments |
![[Metal Gear Solid Rex] One of my favorite game of all times is metal gear solid from from playstation 1. back then it was only a dream to have a metal gear rex figure , until I saw this figure from threeA . inspired by the figure we created this huge ( 2 ft) metal gear rex figure from versa board and acrylic plastic adding LED lights. hoe you like it guys!!!!](userimages/customs/44000/43691-1.jpg) Metal Gear Solid Rex Metal Gear Solidby toymancustomsOne of my favorite game of all times is metal gear solid from from playstation 1. back then it was only a dream to have a metal gear rex figure , unti...9 comments | ![[Special Ops Avengers Vision] As the saying goes, if it ain't broke. Anyway, this is basically a metal gear solid figure which was repainted. I think the figure was enough to pull off the whole special ops look so i just added the goggles and coat.](userimages/customs/42500/42247-1.jpg) Special Ops Avengers Vision Metal Gear Solidby TattooAs the saying goes, if it ain't broke. Anyway, this is basically a metal gear solid figure which was repainted. I think the figure was enough to pull ...10 comments |
![[Raiden - 4 Guns of the Partriots 1:12th Scale] One of my favorite games of all time Metal Gear SOLID MGS 4 GUNS of the PATRIOTS inspired me to make a NINJA RAIDEN in Cybernetic Exoskeleton NANO TECH SUIT. The figure is fully poseable with more than 40 points of articulation so he can adopt almost any pose. Built full shoulder joints from scratch for full range of motion. Decided to make an enhanced muscular suit in dark charcoal gray. Shoulder pads are flexible. He measures approximately 6.5 to 7 inches tall 1:12th SCALE to work with all DC Universe and Marvel Legends Select figures
This Character always seemed to show up when Solid Snake needed him most in the hit PS3 video Game. He appeared in other installments of the game in different ninja suits helping mercenary Solid Snake.
Raiden is a trained member of the FOXHOUND Special Forces. He and Solid Snake helped to preserve the freedom of the World from the terrorist group known as the SONS of LIBERTY.](userimages/customs/41500/41233-1.jpg) Raiden - 4 Guns of the Partriots 1:12th Scale Metal Gear Solidby D&DCUSTOMSOne of my favorite games of all time Metal Gear SOLID MGS 4 GUNS of the PATRIOTS inspired me to make a NINJA RAIDEN in Cybernetic Exoskeleton NANO TEC...8 comments | ![[The BIG BOSS] and here it is, the legendary soldier: The big boss
i bought a revolver ocelot figure (series 1 McFarlane) and i knew before hand that i just couldn't stand the face sculpt (probably because of the looks of ocelot in twin snakes) so i thought i could make another head for him trying to get the look from the twin snakes game, since i don't have too much experience in sculpting i thought that it was a little hard for me to do it, and then came the idea: use the figure as a base for the big boss.
is easily one of my favorite characters from all the metal gear/solid universe (probably because of all the prequels) and i have never seen a figure of him as and old man, so i based all of my work on the artwork for the 1998 game, Metal Gear Solid.
Ok so what i did with him was taking out ocelot's long hair, mustache, belt, the neck of his shirt, the tie, and the belt with bullets that goes on his chest, all of this with my dremel, then sculpted: the back of his hair, the beard, the eye patch](userimages/customs/41500/41140-1.jpg) The BIG BOSS Metal Gear Solidby Mr.?and here it is, the legendary soldier: The big boss
i bought a revolver ocelot figure (series 1 McFarlane) and i knew before hand that i just couldn'...10 comments |
![[Metal Gear Solid 1 - Solid Snake Repaint] I recieved an MGS1 Solid Snake through ebay the other day. It had a lot of shelf wear, and the paint application was a bit outdate (considering the figure came out in 1999!) So I took the honors of doing justice to this great sculpt. The figure was very shiny before, and I'm not a big fan on plastic-y figures. So I painted it with a nice matte finish. I repainted him from head to toe, including his guns (which were blue before??)A lot dry brushing lol hope you guys like it. And check out my other customs :)](userimages/customs/40500/40074-1.jpg) Metal Gear Solid 1 - Solid Snake Repaint Metal Gear Solidby EgrkaI recieved an MGS1 Solid Snake through ebay the other day. It had a lot of shelf wear, and the paint application was a bit outdate (considering the fi...4 comments | ![[Solid Snake Custom Repaint (MGS2)] I recently ordered an MGS2 Solid Snake figure from online, when I realized that the paint application was a little weak. He has a great sculpt, especially for the time period he was made in. So I decided to repaint him, mostly Snake's head. He had a weird ginger beard, which was something he DID NOT have in the game. lol His beard wasn't even that evident. So, I gave him a better skin tone and I tried my best to give him a better beard. In the game, his mustache wasn't as evident as his beard, so I tried to shoot for that. Anyway, I hope you guys like it!](userimages/customs/40000/39927-1.jpg) Solid Snake Custom Repaint (MGS2) Metal Gear Solidby EgrkaI recently ordered an MGS2 Solid Snake figure from online, when I realized that the paint application was a little weak. He has a great sculpt, especi...6 comments |
![[Solid Snake - Metal Gear Solid 2] How come there aren't any good 6/7" scale Snake figures?
This guy uses the always useful SHIELD Agent body, XMC Stealth Wolverine's boots and ML Black Panther feet. Head, pouches and guns come from Medicom Solid and Old Snakes.
Straps were made with styrene strips, some of them aren't attached at both sides (on the legs, ab crunch) to save the full range of movement.
Paints: Model Masters black, white; Citadel enchanted blue. He's covered in four or five different dry brushes of varying shades of blue. Finished with gloss and flat sealants.
Thanks for watching and be sure to comment on Sanjuro04's very awesome MGS1 Snake!
You can also find me on facebook at ShinigamiCustoms and YouTube at ShinigamiMasta.](userimages/customs/39500/39194-1.jpg) Solid Snake - Metal Gear Solid 2 Metal Gear Solidby ShinigamiHow come there aren't any good 6/7" scale Snake figures?
This guy uses the always useful SHIELD Agent body, XMC Stealth Wolverine's boots and M...14 comments | ![[Solid Snake] Made from DCUC Cpt. Boomerang (base body), Young Justice Sport Master (Lower legs), DCUC Aquaman (Head), leftovers from previous customs. The FAMAS Assault rifle came from a loose mystery figure I purchased a while ago.](userimages/customs/39500/39038-1.jpg) Solid Snake Metal Gear Solidby sanjuro04Made from DCUC Cpt. Boomerang (base body), Young Justice Sport Master (Lower legs), DCUC Aquaman (Head), leftovers from previous customs. The FAMAS As...26 comments |
![[Solid Snake] well finally solid snake is completed however i feel i'll end up making another with a better range of movement, the head is attached by magnet so down the line i might make an alternative head based upon the mask worn in mgs4
the parts are detailed in my wip thread, so check it out guys, i'll say however it was a long journey to find a sleek base
the pouches where all casts of the original pouches, the straps sculpted,](userimages/customs/38000/37976-1.jpg) Solid Snake Metal Gear Solidby joey1212well finally solid snake is completed however i feel i'll end up making another with a better range of movement, the head is attached by magnet so dow...13 comments | ![[Custom 6 Inch Metal Gear Cyborg Ninja] CUSTOMS CUSTOM MARVEL LEGENDS STYLE TACTICAL ESPIONAGE SONS OF LIBERTY METAL GEAR SOLID CYBORG NINJA 6 inch FULLY POSEABLE ACTION FIGURE. Figure is fully poseable with over to 32 points of articulation. We used a Moon Knight then repainted/color washed and dremeled and added heads. Removable sword & GUN, and Machine gun added with two variant heads. We wanted him to have a different look and make a simple silver custom. Thought of painting him to match colors used in the game but we already have a different version custom of him with accurate paints so we decided to leave him simple.](userimages/customs/36000/35609-1.jpg) Custom 6 Inch Metal Gear Cyborg Ninja Metal Gear Solidby D&DCUSTOMSCUSTOMS CUSTOM MARVEL LEGENDS STYLE TACTICAL ESPIONAGE SONS OF LIBERTY METAL GEAR SOLID CYBORG NINJA 6 inch FULLY POSEABLE ACTION FIGURE. Figure is fu...8 comments |
![[Custom 6 Inch Metal Gear Solid Cyborb Ninja] D&DCUSTOMS CUSTOM MARVEL LEGENDS STYLE TACTICAL ESPIONAGE SONS OF LIBERTY METAL GEAR SOLID CYBORG NINJA 6 inch to 6.5 inch FULLY POSEABLE ACTION FIGURE. Figure is fully poseable with close to 40 points of articulation. Removable sword & GUN, with two variant heads. We wanted him to have a different look. The Solid Snake has been fully customized with ball jointed shoulders and swivel arm, etc.](userimages/customs/36000/35606-1.jpg) Custom 6 Inch Metal Gear Solid Cyborb Ninja Metal Gear Solidby D&DCUSTOMSD&DCUSTOMS CUSTOM MARVEL LEGENDS STYLE TACTICAL ESPIONAGE SONS OF LIBERTY METAL GEAR SOLID CYBORG NINJA 6 inch to 6.5 inch FULLY POSEABLE ACTION F...17 comments | ![[Metal Gear Soolid Ninja] Figure from customized, figure original standard, with unique details of its kind, painting, structure and finish](userimages/customs/35000/34593-1.jpg) Metal Gear Soolid Ninja |
![[Naked Snake] Head: POC Duke
Body and upper arms: ROC G.I. Joe Pit Commando
Lower arms, Hands and Legs: ROC Snow Job](userimages/customs/32500/32240-1.jpg) Naked Snake | ![[Grey Fox Cyborg Ninja Optic Camouflage] This was just a quick repaint I did just for fun, didn't really liked his head being all clear so I thought at least his face should be skin colored, that and the red dot.
Cheers!](userimages/customs/30500/30428-1.jpg) Grey Fox Cyborg Ninja Optic Camouflage Metal Gear Solidby sambertoThis was just a quick repaint I did just for fun, didn't really liked his head being all clear so I thought at least his face should be skin colored, ...1 comments |
![[Major Roy Campbell] Tom Jane's head resembled young Roy, so I through him in a suit, painted it up like a dress uniform, and now you've got your man on the inside. Your logistics guy, you've got your Roy Campbell. Also he states the obvious a lot...](userimages/customs/27500/27409-1.jpg) Major Roy Campbell Metal Gear Solidby MangaJoeTom Jane's head resembled young Roy, so I through him in a suit, painted it up like a dress uniform, and now you've got your man on the inside. Your l...0 comments | ![[Frank Jaeger "Null"] Ok, so I was highly dissapointed that Frank wasn't in Peace Walker, so I took it upon myself to try and design what he would look like during the game or at least at the era it took place. It was really all Miles with some sculpt and a new knife. :D He was the simplest custom yet... but I'm extremely happy.](userimages/customs/27500/27408-1.jpg) Frank Jaeger "Null" Metal Gear Solidby MangaJoeOk, so I was highly dissapointed that Frank wasn't in Peace Walker, so I took it upon myself to try and design what he would look like during the game...0 comments |
![[Big Boss] Big Boss, the baddest bearded eye patch wearing soldier around. I made this up pretty quickly, he resides as part of a set and stands as a test of my ability to improve over time. I put a huge deal of effort into making his paint job look nice and the head was really a pain to alter to fit onto the neck. The vest got tweaked to seal like a modern tac vest, added some pouches, gave him a nice tiger stripe and od finish... oh, and a removable beret. This is supposed to be like just after Peace Walker in terms of how he is supposed to look.](userimages/customs/27500/27403-1.jpg) Big Boss Metal Gear Solidby MangaJoeBig Boss, the baddest bearded eye patch wearing soldier around. I made this up pretty quickly, he resides as part of a set and stands as a test of my ...1 comments | ![[Predators Royce] Metal Gear Solid "Solid Snake" figure base, full repaint with airbrush and by hand for details, sculpted drum clip to the rifle for movie accuracy, as well as paint scheme. Did some desert camoflouge paint scheme on the rifle with different shades of tan and brown not sure how well it can be seen in the pics though. Leave comments, good or bad please!](userimages/customs/27500/27373-1.jpg) Predators Royce Metal Gear Solidby VaderThorMetal Gear Solid "Solid Snake" figure base, full repaint with airbrush and by hand for details, sculpted drum clip to the rifle for movie ac...2 comments |
|