![[Jason Voorhees] This is just the 12" Sideshow Jason goes to hell figure,..which i was not too happy with for a while cos of the overall look,..it had the basic look of the film so i just added that few extra touches to it,..re-sculpted the head and mask cos i thought the original was to small, and gave it a bit more mass,..ripped the clothes a bit more accurate to the film,..put a bit of padding underneath the clothes to bulk him out a bit more then painted over the parts that were showing through the clothes with acrylics,..hated the green shirt and grey trousers for this one cos they were not the colors for that particular film so i dyed the clothes a grayish blue, weathered them ,.cos that's the way they seemed in the movie also i used the MEZCO CINEMA OF FEAR Jason for reference. The boots i took off the Jason X Sideshow cos they were more bulkier than the ones on the JGTH figure which i thought were too small.
The broken split mask that i got as an accessory with the 12" MEZCO Jason p](userimages/customs/48000/47525-1.jpg) Jason Voorhees Friday the 13thby j-xThis is just the 12" Sideshow Jason goes to hell figure,..which i was not too happy with for a while cos of the overall look,..it had the basic l...1 comments | ![[Jason Lives] This was a pretty simple custom. I picked up a Logan figure from the Wolverine film that came out a few years ago and got to work Dremelling and re-sculpting his head and neck with Milliput. Since his sleeves were rolled up, I Dremeled 'em down and re-sculpted them as well as the tops of his gloves. I also sculpted a hockey mask and added real leather straps. His fence post spear was made out of a wire coat hanger with the tip and melted back end sculpted as well. I repainted the entire figure and presto! Jason Lives! Haha.](userimages/customs/46000/45733-1.jpg) Jason Lives Friday the 13thby SirMWKThis was a pretty simple custom. I picked up a Logan figure from the Wolverine film that came out a few years ago and got to work Dremelling and re-sc...4 comments |
![[Jason Takes Manhattan] The 1999 Jason Goes to Hell figure from McFarlane reminded me more of the Jason Takes Manhattan look so I re-sculpted the head (and also a new hockey mask) to look more movie-accurate and painted his skin grey and his clothes black. I repainted the original mask to look like the melted mask from the end of the film. Finished him up with a few coats of gloss sealer to give him the wet look he has in the film and voila!](userimages/customs/46000/45721-1.jpg) Jason Takes Manhattan Friday the 13thby SirMWKThe 1999 Jason Goes to Hell figure from McFarlane reminded me more of the Jason Takes Manhattan look so I re-sculpted the head (and also a new hockey ...8 comments | ![[Jason Voorhees] The seventh Friday the 13th is probably my favorite out of the bunch and I made a custom that resembled Jason from that movie. It's a wrestler completely sculpted from head to toe.](userimages/customs/44500/44091-1.jpg) Jason Voorhees Friday the 13thby BalisconThe seventh Friday the 13th is probably my favorite out of the bunch and I made a custom that resembled Jason from that movie. It's a wrestler comple...5 comments |
![[Jason Voorhees] I've always been a fan of the friday the 13th movies as cheesy as they are they are all classics and i'm sad they havent come out with any more even though the 2009 remake was still really good its been 3 years. my favorite design for jason was in the 3rd where he first gets the hockey mask and he was always the most menacing feeling. but ive always also loved zombie jason. it just drove me nuts that they always changed his clothing through out films. if they are all continuations he wouldnt care about his clthing only killing everything. so being a fan of his 3rd movie design green shirt and blue pants i wanted to zombify that design so i used the mcfarlane jason and did a full repaint. I then removed the feet from the figure and used those from a NECA friday remake jason and added the gloved hands from a friday part 7 jason. even though jason goes to hell was pretty awful i liked the design of him with the damaged mask having his skin grown over it. so i used a mezco jason g](userimages/customs/43000/42751-1.jpg) Jason Voorhees Friday the 13thby pyramidhead22I've always been a fan of the friday the 13th movies as cheesy as they are they are all classics and i'm sad they havent come out with any more even t...4 comments | ![[Imposter Jason Voorhees] This is my very first custom release. This is a 1:6 scale figure. This figure consists of a 1:6 nude body, custom sculpted resin head & tailored coveralls. I included 4 weapons which are made of metal & wood. It took me about 4 head sculpts to get to this one where I was pleased with the outcome. I used the movie Friday The 13th: A New Beginning for references, every wound & detail was passed onto this figure. This is the battle damaged version where Roy Burns is about to meet his match.](userimages/customs/39500/39223-1.jpg) Imposter Jason Voorhees |
![[Tommy Jarvis (Thom Mathews)] Thought i'd try a Tommy Jarvis custom, one of Jason's main arch enemies in the Friday films, i suppose a "Mouth" action figure from "THE GOONIES" could be ideal for a Corey Feldman incarnation of the character but i like the Thom Mathews version the best (a cool actor of the 80's) from my personal best Friday films "JASON LIVES" although the gore factor is tame compared to previous Friday's, i like the Alice Cooper soundtrack, and the ending sequence with Jason and Tommy battling in the lake, but that's just me, anyway modified an action man by cutting the shins and using putty to lengthen the legs and sawed just under the shoulders and wrist taking away the middle section of the arms and replacing with different arms with a bit more articulation and joined together using putty, re-sculpted the head and feet then came the painful part of the process sewing all the clothes together especially the jacket as i had to add another piece of material to the inner](userimages/customs/37500/37427-1.jpg) Tommy Jarvis (Thom Mathews) Friday the 13thby j-xThought i'd try a Tommy Jarvis custom, one of Jason's main arch enemies in the Friday films, i suppose a "Mouth" action figure from "TH...6 comments | ![[Roy Burns] Repainted & retooled NECA Michael Myers body, repainted & retooled NECA Freddy vs. Jason Jason head and hockey mask, sculpted face, hair, and weapons with Apoxie Sculp. Packaging is a combination of NECA Michael Myers and Grindhouse "Planet Terror Rapist" figrues, as well as Photoshopped card, printed in color.](userimages/customs/37000/36990-1.jpg) Roy Burns Friday the 13thby apemanRepainted & retooled NECA Michael Myers body, repainted & retooled NECA Freddy vs. Jason Jason head and hockey mask, sculpted face, hair, and ...4 comments |
![[Jason Voorhees (Part VII: the New Blood)] Hi there! My Halloween custom is a day late. I meant to have him done yesterday, but I kind of forgot it was Halloween. New Blood Jason has always been jason's coolest look IMO, plus Kane Hodder's first time as Jason. In my tradition of standardizing my Jason Customs, I gave him a similar color scheme to Part 3 Jason through part 6 Jason, since he technically never changed clothes throughout those films. In Part 3 he put on a Green shirt and some grey pants, and left them on through Part 7. so I tried making them all the same color even though the Filmakers didn't give us the same courtesy. Obviously I haven't submitted parts 3 thru 6 Jasons, but I will. He must have changed his clothes in part 8, off-camera at the beginning of the film since his clothes were basically rags hanging off of him in Part 7. Yes, I realize it was just different directors changing Jason's look throughout the films, but don't ruin this for me. Lots of dremeling and blending parts went into this fell](userimages/customs/34500/34039-1.jpg) Jason Voorhees (Part VII: the New Blood) Friday the 13thby BDCdieselHi there! My Halloween custom is a day late. I meant to have him done yesterday, but I kind of forgot it was Halloween. New Blood Jason has always ...11 comments | ![[Jason Voorhees] I wanted to update Jason Voorhees's concept. I made him out of a wrestler and some tshirts.](userimages/customs/31000/30627-1.jpg) Jason Voorhees |
![[Jason Vorhees] a soldier figure w/head... attached it with a skull head, a bit of paint and sculpting. this is my first.. hope you like it](userimages/customs/29500/29174-1.jpg) Jason Vorhees | ![[Jason Voorhees] this guy was made with arms and torso of neca remake jason with neca fvj jasons jacket head hands and sweater. the legs are matt strikers and the pelvis is from mezco hellboy hope you enjoy and comment.](userimages/customs/29500/29112-1.jpg) Jason Voorhees Friday the 13thby kumajinno0this guy was made with arms and torso of neca remake jason with neca fvj jasons jacket head hands and sweater. the legs are matt strikers and the pelv...1 comments |
![[Horror Hombres: Jason Voorhees Symbiote] On a recent hiking trip, up in the woods, our group came upon a deserted small, run-down house in the middle of the trees. Upon entering, we saw this black tar-like gunk that was splattered on the inside of the walls, which resembled the symbiote substance belonging to Venom. As our group pressed on into the woods, and as the daylight diminished, the heart-stopping thought of being chased and hacked by some hockey mask wearing lunatic was on all our minds lol. But even more terrifying was the thought of this machete wielding killer being infected with the symbiote, fueling his rage and amplifying his murderous appetite.
Made from a Hulk base, arms from StreetFighter Alex and legs from a SinCity Marv, here's a concept Jason equipped with an arm which could morph into a hacking tool of monstrous proportions. The chainsaw is just so choice!
Thanks for checking him out.](userimages/customs/29000/28966-1.jpg) Horror Hombres: Jason Voorhees Symbiote Friday the 13thby N TTOn a recent hiking trip, up in the woods, our group came upon a deserted small, run-down house in the middle of the trees. Upon entering, we saw this ...8 comments | ![[Camp Crystal Lake Councillor #2 Brunette] Same recipe as the first, just with a different female figure. I also created rolled up sleeping bags, which I forgot to take pictures of! Ill post a link once I do. Thanks for stopping by!!](userimages/customs/29000/28748-1.jpg) Camp Crystal Lake Councillor #2 Brunette Friday the 13thby PAINTcustomsSame recipe as the first, just with a different female figure. I also created rolled up sleeping bags, which I forgot to take pictures of! Ill post a ...2 comments |
![[Camp Crystal Lake Councillor #1 Blonde] Okay, so I can't really believe that no one has submitted/made one of these yet. But anyways, why have all these fcking jason toys with no one to hunt down. This is just the first in a series of many camp crystal lake survivors, councillors, and victims of jason and pamela voorhees. I removed major figure details, sanded down, sculpted t shirts, and shorts details, w/ stitched look. The t shirt logos were hand painted to match actual camp crystal lake t shirts. Originally I wanted to have alternate heads, with a terrified/dead look on their faces. I still may do this before I am "finished" let me know what u guys think of this idea.](userimages/customs/29000/28747-1.jpg) Camp Crystal Lake Councillor #1 Blonde Friday the 13thby PAINTcustomsOkay, so I can't really believe that no one has submitted/made one of these yet. But anyways, why have all these fcking jason toys with no one to hunt...6 comments | ![[Jason Voorhees: the Final Chapter Repaint] This is just a simple repaint of the 12" sideshow Jason.the shirt I took off and used on my custom part 3 Jason, then I made a completely new shirt for part 4 using darker material cos in the film its mostly raining which gives the light green shirt a darker look, and the trousers I just dirted them up a little. I repainted the mask also, and given it a worn look. As with all my 12" Jasons I've give the masks a new paint job to make them look more screen accurate as when I got mine they were white hockey masks,as any Jason fan would know that his mask has that slight Ochre/yellow tinge to it.](userimages/customs/28000/27945-1.jpg) Jason Voorhees: the Final Chapter Repaint Friday the 13thby j-xThis is just a simple repaint of the 12" sideshow Jason.the shirt I took off and used on my custom part 3 Jason, then I made a completely new shi...0 comments |
![[Jason Voorhees] I had all the other Jason's including the Roy Burns and part 8 Jason which I had to customize, but the only one I did not have was the original part 3 which I missed out on, years went by so I decided to do my own. I took the shirt off the TCM figure, kept the trousers, and painted them a lighter grey. the boots were bulky, so I swapped them for the boots on my Jason goes to hell which suits him better. the rings I had to sand down, I took the hair off and re-sculpted the face using putty. I got the shirt off my part 4 Jason and made a completely new one for that which I'd darkened to make it look more like it did in part 4. Now with the light green shirt, I put on my new figure and padded it out a little on the upper back part to give it that slight hunch-back like in the film. the mask I made out of putty but it seemed a little too big so I swapped it for the mask on the MEZCO 9" exaggerated Jason and put mine on which suited that better too. The mezco mask had a crack at the s](userimages/customs/28000/27801-1.jpg) Jason Voorhees Friday the 13thby j-xI had all the other Jason's including the Roy Burns and part 8 Jason which I had to customize, but the only one I did not have was the original part 3...1 comments | ![[Roy Burns] Although not the best film in the series, I still had to make my own which was basic really so I took a new nightmare freddy took the clothes off and put michael myers overalls on and dyed them a dark blue, took the freddy claw hand off and replaced it with another hand off another figure. The mask I used was out of the 12" freddy vs jason demon freddy. There was a jason mask accessory inside so I carved all the straps out which were inside, however there were claw marks on the mask so I sanded and smoothed them out as much as I could,same with the freddy head, I sanded down the head to get rid of the burn marks, re-painted the mask and I decided to glue the mask on.](userimages/customs/27500/27330-1.jpg) Roy Burns Friday the 13thby j-xAlthough not the best film in the series, I still had to make my own which was basic really so I took a new nightmare freddy took the clothes off and ...1 comments |
![[Jason Takes Manhattan] I saw this recipe on the internet sometime back and when I saw it I just had to make my own as I am a huge jason fan. Basically I took a sideshow 12" jason part 6 figure,took the army utility belt off and dyed the clothes black and ripped them a bit according to the film, painted the gloves black using acrylic paint. I re-sculpted the head and I painted the arms and head a light browny grey color. I took the straps off the original mask and put my own on and I painted the mask according to the film. I used a gloss varnish and put dabs of it on the clothes to make him look all slimey like he is in the film and I made my own weapons for him which is the harpoon gun, the axe and a piece of broken mirror (not actual broken mirror but a plastic shard)](userimages/customs/27500/27328-1.jpg) Jason Takes Manhattan Friday the 13thby j-xI saw this recipe on the internet sometime back and when I saw it I just had to make my own as I am a huge jason fan. Basically I took a sideshow 12&q...3 comments | ![[Nightmare Size Jason Voorhees] This is my first attempt at a custom figure,
Iv always loved Jason Voorhees, And wanted to own a cool super sized version of him ...So I made my own !
Lots of work went into this custom figure, Big time cutting away from the original figure was required, re-sculpting was achieved with a hobby tool and Milliput. (Air-drying putty)
Mask is removable, as you can see in the photos,(Not the best pic, looks better in reality) most of the re-sculpt was the head,
I also added the laces and detail to the boots (I'm considering a very light wash of yellow on the mask to dirty it a little more)
Hockey mask and machete were scratch made with Milliput, mask straps made from left over rubber from original figures tunic.
Chain was found (Perfect) large neck restraint is a clip apart key ring loop !
Thanks for looking and reading my description looking forward to your comments :)
Knightboy2000](userimages/customs/27500/27172-1.jpg) Nightmare Size Jason Voorhees Friday the 13thby Knightboy2000This is my first attempt at a custom figure,
Iv always loved Jason Voorhees, And wanted to own a cool super sized version of him ...So I made my own...4 comments |
![[Jason Voorhees (Part VIII)] Friday the 13th Part: VIII – Jason Takes Manhattan
A lot of people thought this film was stupid, but I rather enjoyed it. It was cool to see Jason out of his element, in the big city. The only thing I didn’t like was unmasked Jason, so I took a bit of artistic liberty with his head. In the movie he looked like a deformed Jack-o-lantern. I basically just kind of switched it up and took a few features from past Jason heads and kind of mixed them with his Part VIII design. I am happy with how it turned out.
Of course, I also added as much articulation as possible so he wasn’t a statue. I drenched him in gloss because he is wet the entire movie and it looks awesome in person but barely showed up in any photos, and for that, I apologize.
Head and mask: Mezco Part 3 Jason (heavily modified)
Torso: Mezco Part IV Jason (modified)
Arms: Mezco Part VI Jason w/random forearms and added elbow articulation
Hands: NECA Freddy vs. Jason with added articulation
Pelvis and](userimages/customs/26000/25782-1.jpg) Jason Voorhees (Part VIII) Friday the 13thby BDCdieselFriday the 13th Part: VIII – Jason Takes Manhattan
A lot of people thought this film was stupid, but I rather enjoyed it. It was cool to see ...5 comments | ![[Jason Voorhees (Part IX)] Here’s Jason Voorhees, from Friday the 13th Part IX: Jason Goes to Hell. Not one of my favorite Friday the 13ths (I loved the first and last 10 minutes where you actually get to see Jason), but one of my favorite looks for Jason. Before I fell in love with the Resident Evil game series, I was taken with anything and everything horror, so I figured I should show some love to where my obsession with anything gory started.
I just took a Mezco part 9 Jason and used the upper body, and various bits for the lower body. I took whatever details I could from the Jason Lower body and transplanted them on and blended them in with Apoxie-Sculpt. Then I went through and sanded and smoothed everything and added the appropriate gashes and nicks with the Dremel and re-painted everything from head to toe and called him good. I will eventually give him better articulation in the arms and feet, but for now, I just called him done. I still have 9 more Jason customs to do so I’ll both](userimages/customs/26000/25781-1.jpg) Jason Voorhees (Part IX) Friday the 13thby BDCdieselHere’s Jason Voorhees, from Friday the 13th Part IX: Jason Goes to Hell. Not one of my favorite Friday the 13ths (I loved the first and last 10...2 comments |
![[Jason Voorhees] Just some better pics for those wo wanted to see it clearly](userimages/customs/25000/24608-1.jpg) Jason Voorhees | ![[Jason Voorhees] Very simple just grabbed the neca jason and as always I hate statue legs so I grabbed a jakks matt striker I had lying and took his lower painted it with many different applications of greys and browns and there you have it. Oh and I almost forgot to mention I cut the hair that was attached to the mask and through tedious dremel magic and super glue attached it to his head to align it with the strands that were sculpted to his head and blam let me know what you guys think.](userimages/customs/25000/24574-1.jpg) Jason Voorhees Friday the 13thby kumajinno0Very simple just grabbed the neca jason and as always I hate statue legs so I grabbed a jakks matt striker I had lying and took his lower painted it w...2 comments |
![[Jason X - Rebooted] Cyborgs are always interesting, especially if they're used to create one of the most legendary Slashers around.
Sculpted the mask directly over the head with tinfoil separating the apoxie from the face. Once dried, this allowed the mask to be removable, not only to show his gruesome mug, but also be able to replace the battery when the light goes dim in the head lol. 2 LED lights are in his eye sockets, and gives it that extra dimension of creepiness when they light up behind the mask. Added real leather for pieces of torn clothing, and sculpted a new machete for him. The left arm came from a 12" Icons Punisher, for a bit of that "human" touch.
Can't hardly find the Mcfarlane JasonX figure without breaking the piggy these days. But who needs that when you've got a 12" version with hell hound eyes that light up, and a big chomping machete to play with!
thanks for stopping by all you gorehounds!](userimages/customs/23000/22536-1.jpg) Jason X - Rebooted Friday the 13thby N TTCyborgs are always interesting, especially if they're used to create one of the most legendary Slashers around.
Sculpted the mask directly over the he...2 comments | ![[Jason Voorhees] 1/6 Jason Voorhees part 8, sculpt a 1/6 soldier with apoxie, add clothes....
thanks for stopping by!!!!](userimages/customs/22500/22404-1.jpg) Jason Voorhees |
![[Jason Voorhees] Jason Voorhees 4" Figure
Recipe
Body-Hasbro G.I. Joe 25th Anniversary Serpentor
Coat-Unknown
Head-Hasbro G.I. Joe 25th Anniversary Zartan
Pants-Custom (obviously)
Mask-Unknown helmet painted white with a red mark
Not one of my better customs...
Comments and suggestions greatly appreciated.](userimages/customs/20500/20133-1.jpg) Jason Voorhees Friday the 13thby DrWhereJason Voorhees 4" Figure
Recipe
Body-Hasbro G.I. Joe 25th Anniversary Serpentor
Coat-Unknown
Head-Hasbro G.I. Joe 25th Anniversary Zartan
Pants...0 comments | ![[Friday the 13th Part VI - Jason Lives - Jason Voor] Same ol, same ol. I sculpted the head and mask with Aves Fixit sculpt and threw on clothing from various figures.](userimages/customs/20500/20070-1.jpg) Friday the 13th Part VI - Jason Lives - Jason Voor |
![[Jason Voorhees New Blood] I completely sculpted over a wwe kane figure wit aves apoxie sculpt //// everything you see is hand made except the machete wich I took from another jason fig///// I scultped his body from head to toe and painted it with model masters paint//// I made tha base from scratch //// the figure comes off his base and u can display him any way you want](userimages/customs/18500/18432-1.jpg) Jason Voorhees New Blood | ![[Jason Voorhees] Here is jason voorhees, I took a snow snake eyes and re worked it. Made the mask by hand using premo and I added the same stuff to his sword to make it look just right. Tell me what you think!](userimages/customs/18500/18397-1.jpg) Jason Voorhees Friday the 13thby themaster81Here is jason voorhees, I took a snow snake eyes and re worked it. Made the mask by hand using premo and I added the same stuff to his sword to make i...0 comments |
|