![[Caretaker & Ghost Rider Horse] this is my version of the original GR from movie version.
caretaker is from the ML caretaker figure, I only to make him smaller in size in order to fit my collection. the horse is from a resin horse figure that I got from ebay. enjoy. :)](userimages/customs/49500/49007-1.jpg) Caretaker & Ghost Rider Horse Ghost Riderby psychokillah1777this is my version of the original GR from movie version.
caretaker is from the ML caretaker figure, I only to make him smaller in size in order to fi...2 comments | ![[Ghostrider V2] after i finished this ghostrider figure there was only one thing missing...THE HELL CYCLE! i put this bike together using two different 1/12 scale maisto models.basically i combined the wheels and tires from a ninja with the main body and frame from a benelli.i did the usual hot glue/clear orange for the flames and painted the engine orange as well.i made the front shield from an old dvd case painted black and glued into place with some gorilla glue epoxy.the head lights are made from some stickers stuck to some styrene and glued into place.i did a little tweaking to the rider as well.first i redid his skull flames,then replaced his arms for a mgs2 ocelot figure,painted to match,then added the spikes.i am much happier with this version of him as he felt very naked without his iconic ride.hope u all enjoy this much needed update.](userimages/customs/48500/48186-1.jpg) Ghostrider V2 Ghost Riderby scorpio13after i finished this ghostrider figure there was only one thing missing...THE HELL CYCLE! i put this bike together using two different 1/12 scale mai...10 comments |
![[Decapitation Ghost Rider] Hey this is my second custom. I made this guy smaller than Biker Spidey because I didn't have much. I made him using another Big Time Spidey upper body, titanium man for the hand and for the lower body I used Bucky Captain America 's shield. Not that good but enjoy!](userimages/customs/48500/48118-1.jpg) Decapitation Ghost Rider Ghost Riderby CybroidHey this is my second custom. I made this guy smaller than Biker Spidey because I didn't have much. I made him using another Big Time Spidey upper bod...0 comments | ![[Ghostrider] head:headless horseman
body;steve rogers
basically after seeing all the awesome ghostriders on the realm i just had to create one of my own.he is not meant to be comic book,or even movie accurate by any means,just my take on him with my skillset and the resources i have to work with.pretty much hot glue flames finished with tamaya clear orange.i painted both the bike and figure flat black,then drilled a bunch of holes,inserted some nickel colored nails,then finished off with jump rings.we all know ghostrider has to have a chain so i gave him a chrome craft chain with jewelry wire threaded thru for posability.i am happy with the result and might try to make an improved version of him some day? hope u all enjoy checkin this guy out.](userimages/customs/46500/46142-1.jpg) Ghostrider Ghost Riderby scorpio13head:headless horseman
body;steve rogers
basically after seeing all the awesome ghostriders on the realm i just had to create one of my own.he is not ...8 comments |
![[Predator Ghost Rider Concept] hey fellow members of nerd nation,today i present a custom absolutley no one asked for lol, a ghost rider predator concept!what would cause a pred to sell his soul?probably not much more than another shot at killin well,anything that he hasnt killed,or danny glover cause lets be honest that was a cool movie but d glover stands about as much of a chance defeating one of the predators that matthew broderick stands a chance of defeating godzilla...oh..never mind.anyways i have been workin on this duder for aloooooong time in between waitin fro giustis customs to dry,i thought it ws a cool concept that no one has dont so i gave it a shot.the head is a heavily modified predator skull that came in a 2 pack and the body is some random pred with different pred fodder thrown in,he has a removeable smart disk,removeable oversized blade,a space gun for blastin fools ,a flaming spear thing and an interchangeable flaming hand for when he is havin trouble gettin his pilot light on in his furnace lit](userimages/customs/44000/43564-1.jpg) Predator Ghost Rider Concept Ghost Riderby dbocustomshey fellow members of nerd nation,today i present a custom absolutley no one asked for lol, a ghost rider predator concept!what would cause a pred to ...40 comments | ![[Ghost Rider] Here is my 4th and DEFINITLY BEST custom, GHOST RIDER!!! I used a Dollar Tree Skullhawk figure, which had the PERFECT face. He also had a black spikey leather jacket and spikey boots. Perfect for Ghost Rider. I painted a little bit of the tan skin all black, and clipped the gun off of his right hand. I painted the face completely white. I tried adding a black shadow effect, but all the color was too dark, so I kept it white. The HARDEST part, was the fire. I spent over a half hour with my new Low temp glue gun trying to make the flames. I was going to make his Hellcycle, but the smooth sports bike toy I had wasn't right at all, and I didn't want to spend 10 hours sculpting nothing but crap. But, I got the idea of something. His blue sports bike, is what turns into the Hellcycle. So, I could just make the blue motorcycle, which was a perfect fit of my toy. So, I painted the bike blue, and painted some yellow flames. I just updated the figure, with a nice steel Hellcycle I bought at the](userimages/customs/42000/41637-1.jpg) Ghost Rider Ghost Riderby Carnage99Here is my 4th and DEFINITLY BEST custom, GHOST RIDER!!! I used a Dollar Tree Skullhawk figure, which had the PERFECT face. He also had a black spikey...8 comments |
![[Ghost Rider(Danny Ketch)] Recipe:
Ghost Rider Movie figure
Jacket from 6 inch Spiderman 2 Doctor Octopus
Carpet tacks
Chain
Not so much a custom but an improvement. I wanted to make a Danny Ketch Ghost Rider as he looks in the comic Ghost Rider: Heavens On Fire. I first took an extra Ghost Rider figure from the movie line and used old pieces of black leather to cover up the terrible leg hip joints. I thought about using Aves Apoxie but wanted to keep all of his articulation. I took the trench coat from Dr. Octopus and used carpet tacks to create the shoulder spikes. I then painted the whole thing flat black using black model paint. When it was dry I put it on the figure and painted the arms of the figure to match the coat. I used an old necklace for his chain and added a random piece from my parts drawer for the tow hook. I then painted the tow hook chrome.](userimages/customs/41500/41113-1.jpg) Ghost Rider(Danny Ketch) Ghost Riderby BrammarleyRecipe:
Ghost Rider Movie figure
Jacket from 6 inch Spiderman 2 Doctor Octopus
Carpet tacks
Chain
Not so much a custom but an improvement. I wanted t...1 comments | ![[Mephisto] I wanted to make the Marvel Select Mephisto look a little more demonic. To do so, I removed his nose, resculpted his face, added horns, and sculpted his feet into hooves. After adding some different clothes, he was finished.](userimages/customs/41000/40686-1.jpg) Mephisto Ghost Riderby BalisconI wanted to make the Marvel Select Mephisto look a little more demonic. To do so, I removed his nose, resculpted his face, added horns, and sculpted ...16 comments |
![[Vengeance] This Vengeance was done in the same style as my previous two Ghost Riders. I made his flames green to reflect his modern look and let him adopt Johnny Blaze's bike from the film. The figure is a combination of Marvel Legends and Ghost Rider movie line Vengeances.](userimages/customs/41000/40685-1.jpg) Vengeance Ghost Riderby BalisconThis Vengeance was done in the same style as my previous two Ghost Riders. I made his flames green to reflect his modern look and let him adopt Johnn...4 comments | ![[Ghost Rider Johnny Blaze] This is an update of a Ghost Rider I made a while back. The skull wasn't too realistic, so I resculpted it and remade the flames. Boothooligan's take on the character was really impressive, especially with the flames covering the face. I attempted to do the same with my version.](userimages/customs/41000/40596-1.jpg) Ghost Rider Johnny Blaze Ghost Riderby BalisconThis is an update of a Ghost Rider I made a while back. The skull wasn't too realistic, so I resculpted it and remade the flames. Boothooligan's tak...6 comments |
![[Ghost Rider Danny Ketch] I made this one a while back after picking up a couple graphic novels involving the return of Ketch. I attempted to make him look more like a casual motorcyclist with blue flames to reflect his newer look. I took the old ML3 cycle and replaced the wheels in order to make it look more realistic. Well, as realistic as it could look considering that it's on fire.](userimages/customs/41000/40595-1.jpg) Ghost Rider Danny Ketch Ghost Riderby BalisconI made this one a while back after picking up a couple graphic novels involving the return of Ketch. I attempted to make him look more like a casual ...1 comments | ![[Spirit of Vengance: Undead G-Man (Ghost Rider 1930] Based on the retconed history of The Spirits of Vengence (Ghost Rider #33), this is my rendition of the "Undead G-man"*.
Recipe:
-MM Joker Goon
-ML Professor X (Jacket)
-Megablocks Skeleton (Head/Neck)
-Misc. Flames, recut/assembled
-Mezco The Spirit (Tie)
-ML Pistols
For basic reference below, I've included the closest source image I could locate from that run - a shot of 'Undead Gman'.
* Before posting this, I could *swear* I had a saved scan from one of the Ghost Rider books of this exactly character (skull belt-buckle, black suit and all, done in a very digital 'painted' style - possibly an interior full page) - however, after looking for that .jpg - it's nowhere to be found. That's what happens when you make something, and don't photograph it for 2 years. Your reference art disappears. ;) If someone can find a shot of this actual ghost rider (or can tell me what issue he appears in) please let me know.](userimages/customs/38500/38075-1.jpg) Spirit of Vengance: Undead G-Man (Ghost Rider 1930 Ghost Riderby blaynescottBased on the retconed history of The Spirits of Vengence (Ghost Rider #33), this is my rendition of the "Undead G-man"*.
Recipe:
-MM Joker...14 comments |
![[Ghost Rider] The Ghost Rider was created using ML 9 bullseye for body, the head was from ML 7 Ghost Rider and the boot took from ML Face-Off Red Skull.....plus all sculpted details by Magic-Sculpt.
The repainted base came from ML boxset and those flame got from Dragon Ball capsule toy.
I repainted whole figure, dry brushed then finished with topcoat.
This figure has taken me few weeks to complete.](userimages/customs/38500/38043-1.jpg) Ghost Rider Ghost Riderby Hunter RThe Ghost Rider was created using ML 9 bullseye for body, the head was from ML 7 Ghost Rider and the boot took from ML Face-Off Red Skull.....plus all...25 comments | ![[Ghost Rider Dark Knight Warrior] This is my second Ghost Rider for my Ghost rider corps. I still have 2 WIPS. 3 hrs per day is really hard. Gotta work to pay my bills :).
Hope you like it Thanks.
recipe:
Head: Series 3 Ghosr Rider
Body: ML Black Panther
Lower Torse: LCBH Darkness
Skirt and sword: WRARRL
Right Shoulder Armor: Spawn](userimages/customs/38000/37515-1.jpg) Ghost Rider Dark Knight Warrior Ghost Riderby markdamalerioThis is my second Ghost Rider for my Ghost rider corps. I still have 2 WIPS. 3 hrs per day is really hard. Gotta work to pay my bills :).
Hope you l...5 comments |
![[Ghost Rider : Spirit of Vengeance] My custom "Ghost Rider: Spirit of Vengeance"... Not that I'm expecting the movie to be any good, but I really like the rather "fresh" and un-cheesy design of this version's rider...
I used a movie Caretaker with raging GR legs and movie Doctor Octopus lower arms. I made the "molten spots" by stabbing the fig with a pin heated over a candle. The rubber flames on the torso of the Caretaker were also removed in-order to accommodate the closing of the jacket. The foot was also replaced to that of a box-set Dracula for the foot pegs of the bike.
I tried my hardest to make the bike (Series 7 Ghost Rider) look at least a little close to the modified Yamaha V-Max they used. The original was pretty much "chop-shopped" in-order to replicate a V-Max's dimentions. Some parts of some bike toy were also added, then sculpted over. I didn't bother to "pretty" it out since it's all burned-up and molten in the movie anyway.
I also attached some Iron](userimages/customs/37000/36620-1.jpg) Ghost Rider : Spirit of Vengeance Ghost Riderby witherdustMy custom "Ghost Rider: Spirit of Vengeance"... Not that I'm expecting the movie to be any good, but I really like the rather "fresh&qu...9 comments | ![[Ghost Rider...] ... Hello!!!... This is my Ghostrider version, made with a terminator T-800 by NECA, and other parts from the Disciple by Mcfarlane and the head from LOTR Boromir by ToyBiz... Happy modeling!!!](userimages/customs/34000/33796-1.jpg) Ghost Rider... Ghost Riderby PANZERVARGAS... Hello!!!... This is my Ghostrider version, made with a terminator T-800 by NECA, and other parts from the Disciple by Mcfarlane and the head from ...17 comments |
![[Ghost Rider] I don't normally do Marvel figures but I had a pretty solid idea for a Ghost Rider repaint and boot swap. The figure is the ML series 7 Ghost Rider with ML series 4 punisher's boots and ML Face offs Punisher's calves. The idea for the costume design was a mix between the way the figure looked orginialy just different color, and the Dan Ketch style suit. Hope you all like it. Sorry for the poor picture quality, just took quick photos from my phone.](userimages/customs/33500/33081-1.jpg) Ghost Rider Ghost Riderby 10over6I don't normally do Marvel figures but I had a pretty solid idea for a Ghost Rider repaint and boot swap. The figure is the ML series 7 Ghost Rider wi...2 comments | ![[Lilith - Mother of Demons] " Soon all my children will be returned to me. Then we will feast on the pitiful bones of our foes."
Lilith is an ancient dark goddess and demonness. She is known as the Queen of the Night, the Mother of Demons, and according to Jewish mythology, the First Wife of Adam. She is depicted as a villain in the Marvel Universe and has fought with heroes such as Ghost Rider, Doctor Strange, Morbius, The Nightstalkers, and The Witches. She strives to overthrow the earth with her demonic children, the Lilin, and rule over them as their queen mother, crushing all of humanity.
I made her in her purple costume with fishnet stockings and upper trim. I dremeled and sanded down some of Scarlet Witch's details and sculpted Lilith's hair high behind Wanda's headpiece to create her high horned forehead. I sculpted her glove bands and her boot tops and repainted the entire figure. She was painted with high quality acrylics and sealed with a matte finish. The fishnet pieces were pieces of spar](userimages/customs/33000/32993-1.jpg) Lilith - Mother of Demons Ghost Riderby lilithzariel" Soon all my children will be returned to me. Then we will feast on the pitiful bones of our foes."
Lilith is an ancient dark goddess and ...4 comments |
![[Ghost Rider the Clown] Parts:
Batman Begins Scarecrow
Ghost Rider head
Chain from Ghost rider movie figure
I was trying to figure out what would be the most fun to dress Ghost Rider as for Halloween.I decided a clown would be the most entertaining. I started with a Batman Begins Scarecrow figure. I cut off the straight jacket and long sleeves.I added a head from a 5 inch ghost rider figure. I then used Aves Apoxie to add the fluff balls for the front, clown collar and the clown hair and nose.I used hot glue for the head flames as well as the flames on the costume. I then painted the figure with acrilic paint and suncatcher paint for the flames. The balloon is just a water balloon I blew up and attached to a spare Ghost Rider chain.](userimages/customs/33000/32802-1.jpg) Ghost Rider the Clown Ghost Riderby BrammarleyParts:
Batman Begins Scarecrow
Ghost Rider head
Chain from Ghost rider movie figure
I was trying to figure out what would be the most fun to dress Gh...2 comments | ![[Ghost Rider 2: Spirit of Vengeance] After seeing the trailer for the new Ghost Rider 2, Spirit of Vengeance movie I looked around for a bike like his. You know how hard it is to find a 1:12 motorcycle? So I decided to go with 1:18 and make a Marvel Universe Ghost Rider from the new movie! He's made from a MU Ghost Rider head/hands, Snake Eyes body, Cobra Commander legs, Crimson Guard feet, and I think a Terminator guy's jacket. The bike is a modified 1:18 MaiSto with added flames and sculpt. I love how the treads in the wheels came out, looking like they're burning from the inside. Ghost Rider had sculpt added to him in various areas then burned with a braising torch, smoothed down, sanded, and broiled again for the charred appearance. The movie character GR looks the same way as if he was set on fire all melty and bubbly. Now Ghost Rider is ready to take on the baddies with the power of hellfire!
Added fire whizz from a Clone Trooper flamethrower!](userimages/customs/33000/32686-1.jpg) Ghost Rider 2: Spirit of Vengeance Ghost Riderby Jin SaotomeAfter seeing the trailer for the new Ghost Rider 2, Spirit of Vengeance movie I looked around for a bike like his. You know how hard it is to find a 1...14 comments |
![[Ghost Rider Corps] Ghost Rider: Johnny Blaze & Danny Ketch:
JB: Head: movie ghost rider, body: toybiz exploding GR,& gloves n booths: ML ghost rider johnny blaze
DK: Head: ML ghost rider johnny blaze, body: repaint GR toybiz
Ghost rider: Vengeance & Lady Ghost rider
VGN: Head: ML Vengeance, body: toybiz vengeance
LDGR: Head: skull keychain, body: black queen toybiz, Gloves: Ironman movie
Ghost rider: GR 2099 & Caretaker Carter Slade
GR 2099: Head: T-800 kenner Terminator, Upper Body: GR toybiz, Lower body: movie magneto, hands: assorted spawn
figure
Carter Slade care taker: modified body into 5 inch scale & simple repaint
Enjoy guys..](userimages/customs/32500/32254-1.jpg) Ghost Rider Corps | ![[Peter Fonda as Mephisto] I worked on a Blackheart movie figure.
I started working on the head.
First I repainted the face and the neck to get and elder look (I used a gloss copper-red; than I added some hair and repainted all them with gloss gold (Mephistopheles in movie has got bold hair).
After that I strted to work on the body.
Firstly I repainted hands with gloss black to simulate gloves and I sculpted the ring on the left hand and painted it withgold and red (probably the red jewel was a ruby); then I cutted off a zone from the coat to get it like it was in the movie; finally I completed my custom painting with gloss black the waistcoat.](userimages/customs/25000/24787-1.jpg) Peter Fonda as Mephisto Ghost Riderby Vlad BasarabI worked on a Blackheart movie figure.
I started working on the head.
First I repainted the face and the neck to get and elder look (I used a gloss co...0 comments |
![[Ghost Rider] This was the glow in the dark figure with the plastic flame rings...The head is from a movie ghostrider and many more flames were added to give him flames all around his head and under the neck...The chain was added as well... Thed eye sockets were painted black and rhe orange eye was painted as well](userimages/customs/24500/24189-1.jpg) Ghost Rider | ![[Ghost Rider 2099] Took a Neca endo skull and mounted it onto and Neca Arnie T2 body. The head still moves side to side like the original. The back of it's head has a large bundle of cables made from the ammo belt of a T:Salvation T1. The hands are held on by rare earth magnets, one alternate hand is a claw from a Darkness figure. I took some liberties with this figure as in the comics he was always kinda lame looking, this is more a mix between the normal GR and the 2099 one. The chain is a bunch of cheap chains pieced together. I may make flames for it in the future. The flames are made of hot glue with several coats of Tamiya clear yellow and orange paints. The shotgun was a last minute addition (literally) while typing this. It is from the T2 Arnie figure with the flame being from the ML Marvel Girl.](userimages/customs/18000/17912-1.jpg) Ghost Rider 2099 Ghost Riderby wesrTook a Neca endo skull and mounted it onto and Neca Arnie T2 body. The head still moves side to side like the original. The back of it's head has a la...13 comments |
![[Ghost Rider] He was made from a Longshot. The skull was sculpted from scratch and the flames are hot glue and twisty ties.](userimages/customs/17000/16984-1.jpg) Ghost Rider | ![[Ghost Rider] I just added a Lego chain,He did not come with one so...](userimages/customs/15000/14960-1.jpg) Ghost Rider |
![[Black Rose] Recipe:
Base:Marvel Legends Electra
Energy: DC Superman Red
Tail: Marvel Heroes Nightcrawler
This one's been in my To Finish pile for a while. I'm still not sure I won't redo it later but I'm satisfied with her for now. I hate making figures with little to no texture so I tried a little spay paint at close range to get a sort of cracking effect. Let me know what you think.](userimages/customs/15000/14656-1.jpg) Black Rose Ghost Riderby BrammarleyRecipe:
Base:Marvel Legends Electra
Energy: DC Superman Red
Tail: Marvel Heroes Nightcrawler
This one's been in my To Finish pile for a while. I'm st...0 comments | ![[Morbius] Recipe:
Base : Morbius figure
Head WCW Billy Kidman Figure
I found another Morbius figure with it's face torn(Seems to be a pattern) and thought I'd try something different this time.Having already done Blood crazed Morbius, I thought I'd try a calmer look this time. I cut off Morbius's old head and sanded down the rips on his outfit. I took the head from a WCW Billy kidman figure and trimmed his nose,cheeks and chin. I primed the head in black spray paint then painted the face white. I painted the sanded chest black, added the head with Aves' Apoxie sculpt, and painted the eyes and costume details.](userimages/customs/13000/12624-1.jpg) Morbius Ghost Riderby BrammarleyRecipe:
Base : Morbius figure
Head WCW Billy Kidman Figure
I found another Morbius figure with it's face torn(Seems to be a pattern) and thought I'd...0 comments |
![[The All New Orb] Recipe:
Base:Red Tornado
Head:Halloween ball
This is pretty much the same recipe as the orb 2.0. I simply added electrical tape for the belts,a thumb tack for the buckle and small star stickers painted white to make this one look like he's wearing the new orb costume from the comic. Enjoy.](userimages/customs/13000/12623-1.jpg) The All New Orb Ghost Riderby BrammarleyRecipe:
Base:Red Tornado
Head:Halloween ball
This is pretty much the same recipe as the orb 2.0. I simply added electrical tape for the belts,a thum...0 comments | ![[Death Ninja] Body:DC Superman Red
Head : MOTU Skeletor hood filled with Ave's Apoxie Sculpt
I present Death Ninja. I took off Superman's head and energy bits. I then carved gashes into him. I added Skeletor's hood and filled it with Apoxie. I painted it with red and dry brushed with black. I then went back and added more gashes in the figure and hood. The sword is from Marvel legend's Ronin.](userimages/customs/13000/12574-1.jpg) Death Ninja Ghost Riderby BrammarleyBody:DC Superman Red
Head : MOTU Skeletor hood filled with Ave's Apoxie Sculpt
I present Death Ninja. I took off Superman's head and energy bits. I t...1 comments |
|