![[The Rocketeer] Just the basic recipe that is commonly used to make him, WWII Cap with cast head and rocket from DMC. The flame base was made with hot glue, still learning how to use a hot glue gun, 2nd time I have ever used it, hope you like him!
Thanks
Steve](userimages/customs/48500/48342-1.jpg) The Rocketeer Rocketeerby StevidJust the basic recipe that is commonly used to make him, WWII Cap with cast head and rocket from DMC. The flame base was made with hot glue, still lea...15 comments | ![[Rocketeer] I made this one a long time ago but I never posted it here. Helmet and jetpack are casts from the long time closed Dead Man customs... I hope he comes back soon. Body base is a Ras Al Ghul with lots of sculpting. Modified gun from DCD Adam Strange](userimages/customs/47000/46736-1.jpg) Rocketeer Rocketeerby Gonza2814I made this one a long time ago but I never posted it here. Helmet and jetpack are casts from the long time closed Dead Man customs... I hope he comes...3 comments |
![[Rocketeer!] The Rocketeer, made for G Brand through the Realm's secret santa exchange.
WWII Cap from the waist down with resculpted wwe boots. Also his arms. wwe R. Mysterio torso under a DC Mr. terrific jacket.
Gloves from a dcd Commish Gordon. The jet pack came from the Rocketeer Bendy figure. The head and all the other details you see were sculpted. Pants, jacket additions, wrist straps and buckles, jetpack straps, ect....
The wwe torso was small enough to make the jacket fit tightly, as a bomber should, but it didn't assemble with the ML hip piece. I filled the chest cavity with resin and carved in my own new keyway for the ML peg. Other than that I really tried to add as much little detail as I could. This WAS for G Brand after all!
The contrail base started as an experiment with canned foam insulation. It's foam over a wire armature that is attached to a piece of granite. (for weight) It was also my first project with the airbrush.
I sincerely hope he's happy to have it. I know I](userimages/customs/45500/45245-1.jpg) Rocketeer! Rocketeerby ole jade jawThe Rocketeer, made for G Brand through the Realm's secret santa exchange.
WWII Cap from the waist down with resculpted wwe boots. Also his arms. w...29 comments | ![[The Rocketeer] This is my first custom of the Rocketeer (movie), one of my favorite characters. I found a loose bend-ems Rocketeer so I cut off the head and hollowed it out( I broke two of my best sculpting tools doing it)! Now its a helmet! The body is a punisher with sculpted vest. I gave him some dirt on his pants and a nazi like gun( as seen in the movie.)When I bought the bendy figure he was missing the rocket so I made one from scratch using two sharpie caps with sculpted details! I plan on doing more version in the future.
Enjoy!](userimages/customs/42500/42082-1.jpg) The Rocketeer |
![[Rocketeer Icon] The rocketeer was on my wish list of customs to make so this was a great opportunity to make him.
Helmet- skratch
Rocket pack- some ironman guns and salt shakers
The rest is skulpted](userimages/customs/37000/36822-1.jpg) Rocketeer Icon Rocketeerby CREATIVE CUSTOMS81The rocketeer was on my wish list of customs to make so this was a great opportunity to make him.
Helmet- skratch
Rocket pack- some ironman guns and s...18 comments | ![[Rocketeer] Hey! That´s my custom of Rocketeer! I haved an Patriot without shield... So... I made another figure! The shield isn´t easy to make...
___________________________________________________________
Hey! Este é meu custom do Rocketeer! Eu tinha um Patriota sem escudo... então... eu fiz outra figura! O escudo num é fácil fazer...](userimages/customs/20500/20019-1.jpg) Rocketeer Rocketeerby vingador.verdeHey! That´s my custom of Rocketeer! I haved an Patriot without shield... So... I made another figure! The shield isn´t easy to make...
__...0 comments |
![[The Rocketeer] Used a lcbh madman figure for the base, aves sculpt for the jacket, sleeves and pants. Used the bendie figure for the helmet and jetpack. Hollowed the the hemet so it could removable. That was an interesting experience. Anyways, always wanted a cool rocketeer figure and now I have one. Thanks for looking!](userimages/customs/19000/18707-1.jpg) The Rocketeer Rocketeerby Mini-meRulesUsed a lcbh madman figure for the base, aves sculpt for the jacket, sleeves and pants. Used the bendie figure for the helmet and jetpack. Hollowed the...2 comments | ![[The Rocketeer] Base body of the Hasbro Marvel Legend Ultimates Captain America with the rocket pack and helmet from the Disney Bendems Rocketeer. Flame from the rocket was a weapon accessorie from ToyBiz Marvel Legend War Machine and the gun accessorie from a DC Direct Black Hawk figure. A pretty easy custom with lots of paint apps](userimages/customs/19000/18678-1.jpg) The Rocketeer Rocketeerby superevanBase body of the Hasbro Marvel Legend Ultimates Captain America with the rocket pack and helmet from the Disney Bendems Rocketeer. Flame from the rock...2 comments |
![[Rocketeer Dunny] My good friend Jim gave me a duplicate Dunny figure that he had and asked if I would make him a new figure. He collects loads of those buggers. I am a big fan of the Rocketeer design (as evidence by the other customs I've done of the Rocketeer) so I thought it would be cool to try one in this style. It was a pretty straight forward repaint of the entire figure. I used a small rubber band for the belt and a Disney figure (Kubrik I think they are called) Rocketeer pack. I sliced up a DVD plastic case for the top helmet fin and cut a slit in the the Dunny head and wedged it in tight. Gave the whole thing a dry brush in black and gray for some 'wear and tear'. He was stoked to get the figure. Cheerio - Chop](userimages/customs/17000/16619-1.jpg) Rocketeer Dunny Rocketeerby PorkchopMy good friend Jim gave me a duplicate Dunny figure that he had and asked if I would make him a new figure. He collects loads of those buggers. I am a...1 comments | ![[The Rocketeer] Hi everyone! Renmauzo here with custom no. 18: The Rocketeer! I personally love this character and have really wanted to make one since seeing some of the other great customizers on here do thier rendition. This was the second of three customs I made as xmas gifts with the third to come soon. I started off with a Stargate SG-1 figure and swapped the head with one from an ML Cannonball, for 2 reasons : 1) the head fit inside the helmet 2) he has strapping from the goggles which I needed to represent the strapping inside the helmet. The helmet is from a LCBH Wraal which I dremmeled and applied the molding onto for the various helmet details as well as the fin from a Macross plane. I replaced the hands with those from a Sephiroth figure, and epoxied the pants for that aviation look. The feet were cut off and re-molded while turning them into boots and the jacket had an extra side of buttons added to it for The Rocketeer flight jacket. Finally, the rocket pack was built from a whole lot of](userimages/customs/12000/11921-1.jpg) The Rocketeer Rocketeerby RenmauzoHi everyone! Renmauzo here with custom no. 18: The Rocketeer! I personally love this character and have really wanted to make one since seeing some of...6 comments |
![[The Rocketeer] Here he is, one of my favorite comic book heroes of the last 20 years. I only wish they had made a line of them. Until then, this will have to do for me. Enjoy!!](userimages/customs/5500/5049-1.jpg) The Rocketeer Rocketeerby Dr.BergSanHere he is, one of my favorite comic book heroes of the last 20 years. I only wish they had made a line of them. Until then, this will have to do for ...1 comments | ![[Neville Sinclair] Neville Sinclair: the evil Nazi Agent villain in 1991's The Rocketeer. I've always wanted to make him, but couldn't find a good enough head-UNTIL NOW!! The pinstripes took a LONG time, but I think they were worth it. Enjoy!!](userimages/customs/5500/5048-1.jpg) Neville Sinclair Rocketeerby Dr.BergSanNeville Sinclair: the evil Nazi Agent villain in 1991's The Rocketeer. I've always wanted to make him, but couldn't find a good enough head-UNTIL NOW...0 comments |
![[The Rocketeer] DCSH Superman Base, Clark Kent's head. Bend-em's figure helmet (dremmeled out), rocket pack and front jacket piece. Captain America's gloves, rubber bands for the legs and harness straps, Cobra's Trouble Bubble rocket pack for the 'comic style pack'- Nick Fury's holster and gun from a Punisher figure...I think. All repainted and black dry brushed to give it a worn in look. Cheers- Chop](userimages/customs/2500/2039-1.jpg) The Rocketeer Rocketeerby PorkchopDCSH Superman Base, Clark Kent's head. Bend-em's figure helmet (dremmeled out), rocket pack and front jacket piece. Captain America's gloves, rubber b...2 comments | ![[Rocketeer] Rocketeer- awesome. Paint here, glue there- bada-bing- Rocketeer.](userimages/customs/1500/1177-1.jpg) Rocketeer |
|